| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mfDMI.c |
| * |
| * Memory DMI table support. |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem/Main) |
| * @e \$Revision: 46495 $ @e \$Date: 2011-02-03 14:10:56 -0700 (Thu, 03 Feb 2011) $ |
| * |
| **/ |
| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| #include "AGESA.h" |
| #include "Ids.h" |
| #include "heapManager.h" |
| #include "cpuServices.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mu.h" |
| #include "GeneralServices.h" |
| #include "Filecode.h" |
| CODE_GROUP (G2_PEI) |
| RDATA_GROUP (G2_PEI) |
| |
| #define FILECODE PROC_MEM_FEAT_DMI_MFDMI_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| #define MAX_DCTS_PER_DIE 2 |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| BOOLEAN |
| MemFDMISupport3 ( |
| IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr |
| ); |
| |
| BOOLEAN |
| MemFDMISupport2 ( |
| IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr |
| ); |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * |
| * This function gets DDR3 DMI information from SPD buffer and stores the info into heap |
| * |
| * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK |
| * |
| */ |
| BOOLEAN |
| MemFDMISupport3 ( |
| IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr |
| ) |
| { |
| UINT8 i; |
| UINT8 Dimm; |
| UINT8 Socket; |
| UINT8 NodeId; |
| UINT8 Dct; |
| UINT8 Channel; |
| UINT8 temp; |
| UINT8 MaxDimms; |
| UINT8 DimmIndex; |
| UINT8 MaxChannelsPerSocket; |
| UINT8 MaxDimmsPerChannel; |
| UINT8 FormFactor; |
| UINT16 TotalWidth; |
| UINT16 Speed; |
| UINT16 Capacity; |
| UINT16 Width; |
| UINT16 Rank; |
| UINT16 BusWidth; |
| UINT64 ManufacturerIdCode; |
| UINT32 MaxSockets; |
| UINT32 Address; |
| |
| MEM_NB_BLOCK *NBPtr; |
| MEM_DATA_STRUCT *MemPtr; |
| ALLOCATE_HEAP_PARAMS AllocHeapParams; |
| MEM_DMI_INFO *DmiTable; |
| MEM_PARAMETER_STRUCT *RefPtr; |
| |
| DIE_STRUCT *MCTPtr; |
| CH_DEF_STRUCT *ChannelPtr; |
| SPD_DEF_STRUCT *SpdDataStructure; |
| |
| NBPtr = MemMainPtr->NBPtr; |
| MemPtr = MemMainPtr->MemPtr; |
| SpdDataStructure = MemPtr->SpdDataStructure; |
| MCTPtr = NBPtr->MCTPtr; |
| RefPtr = MemPtr->ParameterListPtr; |
| |
| // Initialize local variables |
| MaxDimms = 0; |
| |
| AGESA_TESTPOINT (TpProcMemDmi, &MemPtr->StdHeader); |
| |
| ASSERT (NBPtr != NULL); |
| |
| MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ()); |
| for (Socket = 0; Socket < MaxSockets; Socket++) { |
| for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) { |
| temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); |
| MaxDimms = MaxDimms + temp; |
| } |
| } |
| |
| // Allocate heap for memory DMI table 16, 17, 19, 20 |
| AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 2 + sizeof (DMI_T17_MEMORY_TYPE); |
| |
| AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE; |
| AllocHeapParams.Persist = HEAP_SYSTEM_MEM; |
| if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) { |
| PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader); |
| SetMemError (AGESA_CRITICAL, MCTPtr); |
| ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR3 |
| return FALSE; |
| } |
| |
| DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2 + sizeof (DMI_T17_MEMORY_TYPE)); |
| *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms; // Number of memory devices |
| *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = Ddr3MemType; // Memory type |
| |
| // |
| // DMI TYPE 17 |
| // |
| DimmIndex = 0; |
| for (Socket = 0; Socket < MaxSockets; Socket++) { |
| MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); |
| for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) { |
| // |
| // Get Node number and Dct number for this channel |
| // |
| ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel]; |
| NodeId = ChannelPtr->MCTPtr->NodeId; |
| Dct = ChannelPtr->Dct; |
| NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); |
| MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); |
| for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) { |
| DmiTable[DimmIndex].TotalWidth = 0xFFFF; |
| DmiTable[DimmIndex].DataWidth = 0xFFFF; |
| DmiTable[DimmIndex].MemorySize = 0xFFFF; |
| DmiTable[DimmIndex].Speed = 0; |
| DmiTable[DimmIndex].ManufacturerIdCode = 0; |
| DmiTable[DimmIndex].Attributes = 0; |
| DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF; |
| DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF; |
| DmiTable[DimmIndex].DimmPresent = 0; |
| DmiTable[DimmIndex].Socket = Socket; |
| DmiTable[DimmIndex].Channel = Channel; |
| DmiTable[DimmIndex].Dimm = Dimm; |
| DmiTable[DimmIndex].ConfigSpeed = 0; |
| |
| for (i = 0; i < 4; i++) { |
| DmiTable[DimmIndex].SerialNumber[i] = 0xFF; |
| } |
| |
| for (i = 0; i < 18; i++) { |
| DmiTable[DimmIndex].PartNumber[i] = 0xFF; |
| } |
| |
| if (SpdDataStructure[DimmIndex].DimmPresent) { |
| // Total Width (offset 08h) & Data Width (offset 0Ah) |
| TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[8]; |
| if ((TotalWidth & 0x18) == 0) { |
| // non ECC |
| if ((TotalWidth & 0x07) == 0) { |
| DmiTable[DimmIndex].TotalWidth = 8; // 8 bits |
| } else if ((TotalWidth & 0x07) == 1) { |
| DmiTable[DimmIndex].TotalWidth = 16; // 16 bits |
| } else if ((TotalWidth & 0x07) == 2) { |
| DmiTable[DimmIndex].TotalWidth = 32; // 32 bits |
| } else if ((TotalWidth & 0x07) == 3) { |
| DmiTable[DimmIndex].TotalWidth = 64; // 64 bits |
| } |
| DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth ; |
| } else { |
| // ECC |
| if ((TotalWidth & 0x07) == 0) { |
| DmiTable[DimmIndex].TotalWidth = 8 + 8; // 8 bits |
| } else if ((TotalWidth & 0x07) == 1) { |
| DmiTable[DimmIndex].TotalWidth = 16 + 8; // 16 bits |
| } else if ((TotalWidth & 0x07) == 2) { |
| DmiTable[DimmIndex].TotalWidth = 32 + 8; // 32 bits |
| } else if ((TotalWidth & 0x07) == 3) { |
| DmiTable[DimmIndex].TotalWidth = 64 + 8; // 64 bits |
| } |
| DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth - 8; |
| } |
| |
| // Memory Size (offset 0Ch) |
| Capacity = 0; |
| BusWidth = 0; |
| Width = 0; |
| Rank = 0; |
| temp = (UINT8) SpdDataStructure[DimmIndex].Data[4]; |
| if ((temp & 0x0F) == 0) { |
| Capacity = 0x0100; // 256M |
| } else if ((temp & 0x0F) == 1) { |
| Capacity = 0x0200; // 512M |
| } else if ((temp & 0x0F) == 2) { |
| Capacity = 0x0400; // 1G |
| } else if ((temp & 0x0F) == 3) { |
| Capacity = 0x0800; // 2G |
| } else if ((temp & 0x0F) == 4) { |
| Capacity = 0x1000; // 4G |
| } else if ((temp & 0x0F) == 5) { |
| Capacity = 0x2000; // 8G |
| } else if ((temp & 0x0F) == 6) { |
| Capacity = 0x4000; // 16G |
| } |
| |
| temp = (UINT8) SpdDataStructure[DimmIndex].Data[8]; |
| if ((temp & 0x07) == 0) { |
| BusWidth = 8; // 8 bits |
| } else if ((temp & 0x07) == 1) { |
| BusWidth = 16; // 16 bits |
| } else if ((temp & 0x07) == 2) { |
| BusWidth = 32; // 32 bits |
| } else if ((temp & 0x07) == 3) { |
| BusWidth = 64; // 64 bits |
| } |
| |
| temp = (UINT8) SpdDataStructure[DimmIndex].Data[7]; |
| if ((temp & 0x07) == 0) { |
| Width = 4; // 4 bits |
| } else if ((temp & 0x07) == 1) { |
| Width = 8; // 8 bits |
| } else if ((temp & 0x07) == 2) { |
| Width = 16; // 16 bits |
| } else if ((temp & 0x07) == 3) { |
| Width = 32; // 32 bits |
| } |
| |
| temp = (UINT8) SpdDataStructure[DimmIndex].Data[7]; |
| if (((temp >> 3) & 0x07) == 0) { |
| Rank = 1; // 4 bits |
| DmiTable[DimmIndex].Attributes = 1; // Single Rank Dimm |
| } else if (((temp >> 3) & 0x07) == 1) { |
| Rank = 2; // 8 bits |
| DmiTable[DimmIndex].Attributes = 2; // Dual Rank Dimm |
| } else if (((temp >> 3) & 0x07) == 2) { |
| Rank = 3; // 16 bits |
| } else if (((temp >> 3) & 0x07) == 3) { |
| Rank = 4; // 32 bits |
| DmiTable[DimmIndex].Attributes = 4; // Quad Rank Dimm |
| } |
| |
| DmiTable[DimmIndex].MemorySize = (UINT16) (Capacity / 8 * BusWidth / Width * Rank); |
| |
| // Form Factor (offset 0Eh) |
| FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[3]; |
| if ((FormFactor & 0x01) == 0 || (FormFactor & 0x02) == 0) { |
| DmiTable[DimmIndex].FormFactor = 0x09; // RDIMM or UDIMM |
| } else if ((FormFactor & 0x03) == 0) { |
| DmiTable[DimmIndex].FormFactor = 0x0D; // SO-DIMM |
| } |
| |
| // DIMM Present |
| DmiTable[DimmIndex].DimmPresent = 1; |
| |
| // Speed (offset 15h) |
| Speed = (UINT16) SpdDataStructure[DimmIndex].Data[12]; |
| if (Speed == 20) { |
| DmiTable[DimmIndex].Speed = 800; // DDR3-800 |
| } else if (Speed == 15) { |
| DmiTable[DimmIndex].Speed = 1066; // DDR3-1066 |
| } else if (Speed == 12) { |
| DmiTable[DimmIndex].Speed = 1333; // DDR3-1333 |
| } else if (Speed == 10) { |
| DmiTable[DimmIndex].Speed = 1600; // DDR3-1600 |
| } |
| |
| // Manufacturer (offset 17h) |
| ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[118]; |
| DmiTable[DimmIndex].ManufacturerIdCode = (ManufacturerIdCode << 8) | ((UINT64) SpdDataStructure[DimmIndex].Data[117]); |
| |
| // Serial Number (offset 18h) |
| for (i = 0; i < 4; i++) { |
| DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 122]; |
| } |
| // Part Number (offset 1Ah) |
| for (i = 0; i < 18; i++) { |
| DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 128]; |
| } |
| // Extended Size (offset 1Ch) - @todo: pending for SPD SPEC update |
| DmiTable[DimmIndex].ExtSize = 0; |
| |
| // Configured Memory Clock Speed (offset 20h) |
| DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed; |
| |
| // AGESA does NOT support this feature when bank interleaving is enabled. |
| if (!RefPtr->EnableBankIntlv) { |
| if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) { |
| Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & 0x1FF83FE0; |
| Address = Address >> 2; |
| DmiTable[DimmIndex].StartingAddr = Address; |
| DmiTable[DimmIndex].EndingAddr = Address + (UINT32) (DmiTable[DimmIndex].MemorySize * 0x0400); |
| } |
| } |
| } // Dimm present |
| } // Dimm loop |
| } // Channel loop |
| } // Socket loop |
| |
| return TRUE; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * |
| * This function gets DDR2 DMI information from SPD buffer and stores the info into heap |
| * |
| * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK |
| * |
| */ |
| BOOLEAN |
| MemFDMISupport2 ( |
| IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr |
| ) |
| { |
| UINT8 i; |
| UINT8 Dimm; |
| UINT8 Socket; |
| UINT8 NodeId; |
| UINT8 Dct; |
| UINT8 Channel; |
| UINT8 temp; |
| UINT8 MaxDimms; |
| UINT8 DimmIndex; |
| UINT8 MaxChannelsPerSocket; |
| UINT8 MaxDimmsPerChannel; |
| UINT8 FormFactor; |
| UINT8 Temp; |
| UINT8 Rank; |
| UINT16 TotalWidth; |
| UINT32 Speed; |
| UINT32 MaxSockets; |
| UINT32 Address; |
| |
| MEM_NB_BLOCK *NBPtr; |
| MEM_DATA_STRUCT *MemPtr; |
| ALLOCATE_HEAP_PARAMS AllocHeapParams; |
| MEM_DMI_INFO *DmiTable; |
| DIE_STRUCT *MCTPtr; |
| CH_DEF_STRUCT *ChannelPtr; |
| SPD_DEF_STRUCT *SpdDataStructure; |
| MEM_PARAMETER_STRUCT *RefPtr; |
| |
| NBPtr = MemMainPtr->NBPtr; |
| MemPtr = MemMainPtr->MemPtr; |
| SpdDataStructure = MemPtr->SpdDataStructure; |
| MCTPtr = NBPtr->MCTPtr; |
| RefPtr = MemPtr->ParameterListPtr; |
| |
| // Initialize local variables |
| MaxDimms = 0; |
| |
| ASSERT (NBPtr != NULL); |
| |
| MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ()); |
| for (Socket = 0; Socket < MaxSockets; Socket++) { |
| for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) { |
| temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); |
| MaxDimms = MaxDimms + temp; |
| } |
| } |
| |
| // Allocate heap for memory DMI table 16, 17, 19, 20 |
| AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 3; |
| |
| AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE; |
| AllocHeapParams.Persist = HEAP_SYSTEM_MEM; |
| if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) { |
| PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader); |
| SetMemError (AGESA_CRITICAL, MCTPtr); |
| ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR2 |
| return FALSE; |
| } |
| |
| DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2 + sizeof (DMI_T17_MEMORY_TYPE)); |
| *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms; // Number of memory devices |
| *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = Ddr2MemType; // Memory type |
| |
| // |
| // DMI TYPE 17 |
| // |
| DimmIndex = 0; |
| for (Socket = 0; Socket < MaxSockets; Socket++) { |
| MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); |
| for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) { |
| // |
| // Get Node number and Dct number for this channel |
| // |
| ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel]; |
| NodeId = ChannelPtr->MCTPtr->NodeId; |
| Dct = ChannelPtr->Dct; |
| NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); |
| NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); |
| MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); |
| for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) { |
| DmiTable[DimmIndex].TotalWidth = 0xFFFF; |
| DmiTable[DimmIndex].DataWidth = 0xFFFF; |
| DmiTable[DimmIndex].MemorySize = 0xFFFF; |
| DmiTable[DimmIndex].Speed = 0; |
| DmiTable[DimmIndex].ManufacturerIdCode = 0; |
| DmiTable[DimmIndex].Attributes = 0; |
| DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF; |
| DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF; |
| DmiTable[DimmIndex].DimmPresent = 0; |
| DmiTable[DimmIndex].ConfigSpeed = 0; |
| |
| for (i = 0; i < 4; i++) { |
| DmiTable[DimmIndex].SerialNumber[i] = 0xFF; |
| } |
| |
| for (i = 0; i < 18; i++) { |
| DmiTable[DimmIndex].PartNumber[i] = 0xFF; |
| } |
| |
| if (SpdDataStructure[DimmIndex].DimmPresent) { |
| // Total Width (offset 08h) & Data Width (offset 0Ah) |
| TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[13]; |
| if ((TotalWidth & 0x04) != 0) { |
| DmiTable[DimmIndex].TotalWidth = 4; // 4 bits |
| } else if ((TotalWidth & 0x08) != 0) { |
| DmiTable[DimmIndex].TotalWidth = 8; // 8 bits |
| } else if ((TotalWidth & 0x10) != 0) { |
| DmiTable[DimmIndex].TotalWidth = 16; // 16 bits |
| } else if ((TotalWidth & 0x20) != 0) { |
| DmiTable[DimmIndex].TotalWidth = 32; // 32 bits |
| } |
| DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth; |
| |
| // Memory Size (offset 0Ch), Attributes (offset 1Bh) |
| Rank = (UINT8) SpdDataStructure[DimmIndex].Data[5] & 0x07; |
| if (Rank == 0) { |
| DmiTable[DimmIndex].Attributes = 1; // Single Rank Dimm |
| } else if (Rank == 1) { |
| DmiTable[DimmIndex].Attributes = 2; // Dual Rank Dimm |
| } else if (Rank == 3) { |
| DmiTable[DimmIndex].Attributes = 4; // Quad Rank Dimm |
| } |
| |
| Temp = (UINT8) SpdDataStructure[DimmIndex].Data[31]; |
| for (i = 0; i < 8; i++) { |
| if ((Temp & 0x01) == 1) { |
| DmiTable[DimmIndex].MemorySize = 0x80 * (i + 1) * (Rank + 1); |
| } |
| Temp = Temp >> 1; |
| } |
| |
| // Form Factor (offset 0Eh) |
| FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[20]; |
| if ((FormFactor & 0x04) == 4) { |
| DmiTable[DimmIndex].FormFactor = 0x0D; // SO-DIMM |
| } else { |
| DmiTable[DimmIndex].FormFactor = 0x09; // RDIMM or UDIMM |
| } |
| |
| // DIMM Present |
| DmiTable[DimmIndex].DimmPresent = 1; |
| |
| // DIMM Index |
| DmiTable[DimmIndex].Socket = Socket; |
| DmiTable[DimmIndex].Channel = Channel; |
| DmiTable[DimmIndex].Dimm = Dimm; |
| |
| // Speed (offset 15h) |
| Speed = NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFDramConfigHiReg); |
| Speed = Speed & 0x00000007; |
| if (Speed == 0) { |
| DmiTable[DimmIndex].Speed = 400; // 400MHz |
| } else if (Speed == 1) { |
| DmiTable[DimmIndex].Speed = 533; // 533MHz |
| } else if (Speed == 2) { |
| DmiTable[DimmIndex].Speed = 667; // 667MHz |
| } else if (Speed == 3) { |
| DmiTable[DimmIndex].Speed = 800; // 800MHz |
| } |
| |
| // Manufacturer (offset 17h) |
| DmiTable[DimmIndex].ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[64]; |
| |
| // Serial Number (offset 18h) |
| for (i = 0; i < 4; i++) { |
| DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 95]; |
| } |
| |
| // Part Number (offset 1Ah) |
| for (i = 0; i < 18; i++) { |
| DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 73]; |
| } |
| |
| // Configured Memory Clock Speed (offset 20h) |
| DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed; |
| |
| // AGESA does NOT support this feature when bank interleaving is enabled. |
| if (!RefPtr->EnableBankIntlv) { |
| if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) { |
| Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & 0x1FF83FE0; |
| Address = Address >> 2; |
| DmiTable[DimmIndex].StartingAddr = Address; |
| DmiTable[DimmIndex].EndingAddr = Address + (UINT32) (DmiTable[DimmIndex].MemorySize * 0x0400); |
| } |
| } |
| |
| } // DIMM Present |
| } // DIMM loop |
| } |
| } |
| |
| return TRUE; |
| } |
| |
| /*--------------------------------------------------------------------------------------- |
| * L O C A L F U N C T I O N S |
| *--------------------------------------------------------------------------------------- |
| */ |
| |