SNB+MRC boards: Migrate MRC settings to devicetree
For Sandy Bridge boards with MRC raminit support, migrate as much
MRC settings to devicetree as possible, to stop mainboard code from
needlessly overwriting entire PEI data structure, so they will not
interfere with upcoming transition to one standard Haswell way of
providing SPD info to northbridge.
Some exceptions allowed are described below and in code comments.
SPD-related items are kept out of devicetree for now. They will be
migrated (with a different representation) with the Haswell SPD
transition.
google/{butterfly,link,parrot,stout} have max DDR3 frequency set in
pei_data to 1600 (2*800), but in devicetree to 666. The reason for the
difference seems to be problems with native raminit code. These are
converted into ternaries tied to CONFIG_USE_NATIVE_RAMINIT, with an
added "fix me" tag. asus/p8x7x-series also needs the same treatment,
based on testing various memory on p8z77-m hardware.
TEST=Builds on all affected boards. asus/p8z77-m still works with multiple RAM modules tested.
Change-Id: Ie349a8f400eecca3cdbc196ea0790aebe0549e39
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
diff --git a/src/mainboard/asus/p8x7x-series/devicetree.cb b/src/mainboard/asus/p8x7x-series/devicetree.cb
index 0dc77f3..2913519 100644
--- a/src/mainboard/asus/p8x7x-series/devicetree.cb
+++ b/src/mainboard/asus/p8x7x-series/devicetree.cb
@@ -1,6 +1,24 @@
## SPDX-License-Identifier: GPL-2.0-only
chip northbridge/intel/sandybridge
+ # All MRC-capable boards in family (P8Z77-M[ PRO]) lists supported
+ # DIMMs down to 1.25v
+ register "ddr3lv_support" = "1"
+ # FIXME: Nothing can run native at 800MHz on p8z77-m, others may have same problem
+ register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
+
+ register "usb_port_config" = "{
+ {1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
+ {1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
+ {1, 6, 0x0080}, {1, 5, 0x0080}, {1, 5, 0x0080}, {1, 6, 0x0080}
+ }"
+ # 4 bit switch mask. 0=not switchable, 1=switchable
+ # Means once it's loaded the OS, it can swap ports
+ # from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf
+ register "usb3.hs_port_switch_mask" = "0xf"
+ # (The other 3 usb3.* settings can be set from nvram options, and so are set
+ # from runtime code)
+
device domain 0 on
device ref host_bridge on end # Host bridge
device ref peg10 on end # PCIEX16_1
diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c
index 9b4fa1d..fdb0a45 100644
--- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c
+++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c
@@ -52,34 +52,10 @@
void mainboard_fill_pei_data(struct pei_data *pei)
{
- uint8_t spdaddr[] = {0xa0, 0xa2, 0xa4, 0xa6}; /* SMBus mul 2 */
- uint16_t usbcfg[16][3] = {
- /* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */
- {1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
- {1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
- {1, 6, 0x0080}, {1, 5, 0x0080}, {1, 5, 0x0080}, {1, 6, 0x0080}
- };
+ const uint8_t spdaddr[] = {0xa0, 0xa2, 0xa4, 0xa6}; /* SMBus mul 2 */
memcpy(pei->spd_addresses, &spdaddr, sizeof(spdaddr));
- pei->gbe_enable = 0; /* Board uses no Intel GbE but a RTL8111F */
- pei->max_ddr3_freq = 1600; /* 1333=Sandy; 1600=Ivy */
-
- memcpy(pei->usb_port_config, &usbcfg, sizeof(usbcfg));
-
- /* ASUS P8Z77-M manual lists some supported DIMMs down to 1.25v */
- pei->ddr3lv_support = 1;
- /*
- * PCIe 3.0 support. As we use Ivy Bridge, let's enable it,
- * but might cause some system instability!
- */
- pei->pcie_init = 1;
- /*
- * 4 bit switch mask. 0=not switchable, 1=switchable
- * Means once it's loaded the OS, it can swap ports
- * from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf
- */
- pei->usb3.hs_port_switch_mask = 0xf;
/*
* USB 3 mode settings.
* These are obtained from option table then bit masked to keep within range.
diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb
index cad9c5c..cdcaa57 100644
--- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb
+++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb
@@ -1,6 +1,11 @@
## SPDX-License-Identifier: GPL-2.0-only
chip northbridge/intel/sandybridge
+ register "usb_port_config" = "{
+ {1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
+ {1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
+ {1, 6, 0x0080}, {1, 5, 0x0080}, {1, 5, 0x0080}, {1, 6, 0x0080}
+ }"
device domain 0 on
subsystemid 0x1043 0x84ca inherit
chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/early_init.c b/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/early_init.c
index a93f5e9..ac3eb42 100644
--- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/early_init.c
+++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/early_init.c
@@ -58,6 +58,10 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
+ const uint8_t spdaddr[] = {0xa0, 0xa2, 0xa4, 0xa6}; /* SMBus mul 2 */
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
/*
* USB3 mode:
* 0 = Disable: work always as USB 2.0(ehci)
@@ -66,88 +70,9 @@
* 3 = Smart Auto : same than Auto, but if OS loads USB3 driver
* and reboots, it will keep the USB3.0 speed
*/
- unsigned int usb3_mode = get_uint_option("usb3_mode", 1);
- usb3_mode &= 0x3; /* ensure it's 0/1/2/3 only */
-
+ pei_data->usb3.mode = get_uint_option("usb3_mode", 1) & 0x3;
/* Load USB3 pre-OS xHCI driver */
- unsigned int usb3_drv = get_uint_option("usb3_drv", 1);
- usb3_drv &= 0x1; /* ensure it's 0/1 only */
-
+ pei_data->usb3.preboot_support = get_uint_option("usb3_drv", 1) & 0x1;
/* Use USB3 xHCI streams */
- unsigned int usb3_streams = get_uint_option("usb3_streams", 1);
- usb3_streams &= 0x1; /* ensure it's 0/1 only */
-
- struct pei_data pd = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 1, /* 0=Mobile, 1=Desktop/Server */
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* SMBus mul 2 */
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 0, /* Asus 2203 BIOS shows XUECA016, but no EC */
- .gbe_enable = 0, /* Board uses no Intel GbE but a RTL8111F */
- .max_ddr3_freq = 1600, /* 1333=Sandy; 1600=Ivy */
- .usb_port_config = {
- /* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */
- { 1, 0, 0x0080 }, /* USB3 front internal header */
- { 1, 0, 0x0080 }, /* USB3 front internal header */
- { 1, 1, 0x0080 }, /* USB3 ETH top connector */
- { 1, 1, 0x0080 }, /* USB3 ETH bottom connector */
- { 1, 2, 0x0080 }, /* USB2 PS2 top connector */
- { 1, 2, 0x0080 }, /* USB2 PS2 bottom connector */
- { 1, 3, 0x0080 }, /* USB2 internal header (USB78) */
- { 1, 3, 0x0080 }, /* USB2 internal header (USB78) */
- { 1, 4, 0x0080 }, /* USB2 internal header (USB910) */
- { 1, 4, 0x0080 }, /* USB2 internal header (USB910) */
- { 1, 6, 0x0080 }, /* USB2 internal header (USB1112) */
- { 1, 5, 0x0080 }, /* USB2 internal header (USB1112) */
- { 0, 5, 0x0080 }, /* Unused. Asus DEBUG_PORT ??? */
- { 0, 6, 0x0080 } /* Unused. Asus DEBUG_PORT ??? */
- },
- .usb3 = {
- /* 0=Disable; 1=Enable (start at USB3 speed)
- * 2=Auto (start as USB2 speed until OS loads)
- * 3=Smart Auto (like Auto but keep speed on reboot)
- */
- usb3_mode,
- /* 4 bit switch mask. 0=not switchable, 1=switchable
- * Means once it's loaded the OS, it can swap ports
- * from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf
- */
- 0xf,
- usb3_drv, /* 1=Load xHCI pre-OS drv */
- /* 0=Don't use xHCI streams for better compatibility
- * 1=use xHCI streams for better speed
- */
- usb3_streams
- },
- /* ASUS P8Z77-M PRO manual says 1.35v DIMMs are supported */
- .ddr3lv_support = 1,
- /* PCIe 3.0 support. As we use Ivy Bridge, let's enable it,
- * but might cause some system instability !
- */
- .pcie_init = 1,
- /* Command Rate. 0=Auto; 1=1N; 2=2N.
- * Leave it always at Auto for compatibility & stability
- */
- .nmode = 0,
- /* DDR refresh rate. 0=Auto based on DRAM's temperature;
- * 1=Normal rate for speed; 2=Double rate for stability
- */
- .ddr_refresh_rate_config = 0
- };
-
- /* copy the data to output PEI */
- *pei_data = pd;
+ pei_data->usb3.xhci_streams = get_uint_option("usb3_streams", 1) & 0x1;
}
diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/overridetree.cb b/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/overridetree.cb
index 0162547..d7aea49 100644
--- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/overridetree.cb
+++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m_pro/overridetree.cb
@@ -1,6 +1,11 @@
## SPDX-License-Identifier: GPL-2.0-only
chip northbridge/intel/sandybridge
+ register "usb_port_config" = "{
+ {1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
+ {1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
+ {1, 6, 0x0080}, {1, 5, 0x0080}, {0, 5, 0x0080}, {0, 6, 0x0080}
+ }"
device domain 0 on
subsystemid 0x1043 0x84ca inherit
chip southbridge/intel/bd82x6x
diff --git a/src/mainboard/google/butterfly/devicetree.cb b/src/mainboard/google/butterfly/devicetree.cb
index 5b3841a..a72d984 100644
--- a/src/mainboard/google/butterfly/devicetree.cb
+++ b/src/mainboard/google/butterfly/devicetree.cb
@@ -18,7 +18,27 @@
register "gpu_cpu_backlight" = "0x000001e8"
register "gpu_pch_backlight" = "0x03d00000"
- register "max_mem_clock_mhz" = "666" # DDR3-1333
+ register "ec_present" = "1"
+ # FIXME: Native raminit requires reduced max clock
+ register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
+ # Force double refresh rate
+ register "ddr_refresh_rate_config" = "DDR_REFRESH_RATE_DOUBLE"
+
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 1, 4, 0x0080 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },}"
device domain 0 on
device ref host_bridge on end # host bridge
diff --git a/src/mainboard/google/butterfly/early_init.c b/src/mainboard/google/butterfly/early_init.c
index 4e9639f..e658d37 100644
--- a/src/mainboard/google/butterfly/early_init.c
+++ b/src/mainboard/google/butterfly/early_init.c
@@ -74,45 +74,9 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .ddr3lv_support = 0,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* enabled USB oc pin length */
- { 1, 0, 0x0040 }, /* P0: Right USB 3.0 #1 (no OC) */
- { 1, 0, 0x0040 }, /* P1: Right USB 3.0 #2 (no OC) */
- { 1, 0, 0x0040 }, /* P2: Camera (no OC) */
- { 0, 0, 0x0000 }, /* P3: Empty */
- { 0, 0, 0x0000 }, /* P4: Empty */
- { 0, 0, 0x0000 }, /* P5: Empty */
- { 0, 0, 0x0000 }, /* P6: Empty */
- { 0, 0, 0x0000 }, /* P7: Empty */
- { 0, 4, 0x0000 }, /* P8: Empty */
- { 1, 4, 0x0080 }, /* P9: Left USB 1 (no OC) */
- { 1, 4, 0x0040 }, /* P10: Mini PCIe - WLAN / BT (no OC) */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 0, 4, 0x0000 }, /* P12: Empty */
- { 0, 4, 0x0000 }, /* P13: Empty */
- },
- .ddr_refresh_rate_config = 2, /* Force double refresh rate */
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0x00, 0xA4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
}
diff --git a/src/mainboard/google/link/devicetree.cb b/src/mainboard/google/link/devicetree.cb
index c5a0a08..88983dc 100644
--- a/src/mainboard/google/link/devicetree.cb
+++ b/src/mainboard/google/link/devicetree.cb
@@ -17,7 +17,26 @@
register "gpu_cpu_backlight" = "0x00000200"
register "gpu_pch_backlight" = "0x04000000"
- register "max_mem_clock_mhz" = "666"
+ register "ec_present" = "1"
+ register "ddr3lv_support" = "1"
+ # FIXME: Native raminit requires reduced max clock
+ register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
+
+ register "usb_port_config" = "{
+ { 0, 3, 0x0000 },
+ { 1, 0, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 1, 3, 0x0040 },
+ { 0, 3, 0x0000 },
+ { 1, 3, 0x0040 },
+ { 0, 3, 0x0000 },
+ { 0, 3, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },}"
device domain 0 on
subsystemid 0x1ae0 0xc000 inherit
diff --git a/src/mainboard/google/link/early_init.c b/src/mainboard/google/link/early_init.c
index 17e8b54..a4127f1 100644
--- a/src/mainboard/google/link/early_init.c
+++ b/src/mainboard/google/link/early_init.c
@@ -83,46 +83,8 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .ddr3lv_support = 1,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* Empty and onboard Ports 0-7, set to un-used pin OC3 */
- { 0, 3, 0x0000 }, /* P0: Empty */
- { 1, 0, 0x0040 }, /* P1: Left USB 1 (OC0) */
- { 1, 1, 0x0040 }, /* P2: Left USB 2 (OC1) */
- { 1, 3, 0x0040 }, /* P3: SDCARD (no OC) */
- { 0, 3, 0x0000 }, /* P4: Empty */
- { 1, 3, 0x0040 }, /* P5: WWAN (no OC) */
- { 0, 3, 0x0000 }, /* P6: Empty */
- { 0, 3, 0x0000 }, /* P7: Empty */
- /* Empty and onboard Ports 8-13, set to un-used pin OC4 */
- { 1, 4, 0x0040 }, /* P8: Camera (no OC) */
- { 1, 4, 0x0040 }, /* P9: Bluetooth (no OC) */
- { 0, 4, 0x0000 }, /* P10: Empty */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 0, 4, 0x0000 }, /* P12: Empty */
- { 0, 4, 0x0000 }, /* P13: Empty */
- },
- };
- *pei_data = pei_data_template;
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
+
/* LINK has 2 channels of memory down, so spd_data[0] and [2]
both need to be populated */
memcpy(pei_data->spd_data[0], locate_spd(),
diff --git a/src/mainboard/google/parrot/devicetree.cb b/src/mainboard/google/parrot/devicetree.cb
index 6bc4b45..bf1bff3 100644
--- a/src/mainboard/google/parrot/devicetree.cb
+++ b/src/mainboard/google/parrot/devicetree.cb
@@ -17,7 +17,25 @@
register "gpu_cpu_backlight" = "0x000001d4"
register "gpu_pch_backlight" = "0x03aa0000"
- register "max_mem_clock_mhz" = "666"
+ register "ec_present" = "1"
+ # FIXME: Native raminit requires reduced max clock
+ register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
+
+ register "usb_port_config" = "{
+ { 0, 3, 0x0000 },
+ { 1, 0, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 0, 3, 0x0000 },
+ { 0, 3, 0x0000 },
+ { 0, 3, 0x0000 },
+ { 0, 3, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },}"
device domain 0 on
device ref host_bridge on end # host bridge
diff --git a/src/mainboard/google/parrot/early_init.c b/src/mainboard/google/parrot/early_init.c
index ba93531..efdb9a2 100644
--- a/src/mainboard/google/parrot/early_init.c
+++ b/src/mainboard/google/parrot/early_init.c
@@ -52,46 +52,11 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* Empty and onboard Ports 0-7, set to un-used pin OC3 */
- { 0, 3, 0x0000 }, /* P0: Empty */
- { 1, 0, 0x0040 }, /* P1: Left USB 1 (OC0) */
- { 1, 1, 0x0040 }, /* P2: Left USB 2 (OC1) */
- { 1, 1, 0x0040 }, /* P3: Left USB 3 (OC1) */
- { 0, 3, 0x0000 }, /* P4: Empty */
- { 0, 3, 0x0000 }, /* P5: Empty */
- { 0, 3, 0x0000 }, /* P6: Empty */
- { 0, 3, 0x0000 }, /* P7: Empty */
- /* Empty and onboard Ports 8-13, set to un-used pin OC4 */
- { 1, 4, 0x0040 }, /* P8: MiniPCIe (WLAN) (no OC) */
- { 0, 4, 0x0000 }, /* P9: Empty */
- { 1, 4, 0x0040 }, /* P10: Camera (no OC) */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 0, 4, 0x0000 }, /* P12: Empty */
- { 0, 4, 0x0000 }, /* P13: Empty */
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0x00, 0xA4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
diff --git a/src/mainboard/google/stout/devicetree.cb b/src/mainboard/google/stout/devicetree.cb
index 6710b41..a2b8452 100644
--- a/src/mainboard/google/stout/devicetree.cb
+++ b/src/mainboard/google/stout/devicetree.cb
@@ -17,7 +17,30 @@
register "gpu_cpu_backlight" = "0x1155"
register "gpu_pch_backlight" = "0x06100610"
- register "max_mem_clock_mhz" = "666"
+ register "ec_present" = "1"
+ # FIXME: Native raminit requires reduced max clock
+ register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
+
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 0, 1, 0x0000 },
+ { 1, 1, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 0, 1, 0x0000 },
+ { 0, 1, 0x0000 },
+ { 0, 5, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 0, 5, 0x0000 },
+ { 0, 5, 0x0000 },
+ { 0, 5, 0x0000 },
+ { 1, 5, 0x0040 },}"
+
+ register "usb3.mode" = "2" # Auto
+ register "usb3.hs_port_switch_mask" = "3" # Ports 0 & 1
+ register "usb3.preboot_support" = "0" # No PreOS boot support
+ register "usb3.xhci_streams" = "1" # Sure, lets have streams
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/google/stout/early_init.c b/src/mainboard/google/stout/early_init.c
index e5ed8e9..85c4e15 100644
--- a/src/mainboard/google/stout/early_init.c
+++ b/src/mainboard/google/stout/early_init.c
@@ -89,51 +89,11 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* enabled USB oc pin length */
- { 1, 0, 0x0040 }, /* P0: USB 3.0 1 (OC0) */
- { 1, 0, 0x0040 }, /* P1: USB 3.0 2 (OC0) */
- { 0, 1, 0x0000 }, /* P2: Empty */
- { 1, 1, 0x0040 }, /* P3: Camera (no OC) */
- { 1, 1, 0x0040 }, /* P4: WLAN (no OC) */
- { 1, 1, 0x0040 }, /* P5: WWAN (no OC) */
- { 0, 1, 0x0000 }, /* P6: Empty */
- { 0, 1, 0x0000 }, /* P7: Empty */
- { 0, 5, 0x0000 }, /* P8: Empty */
- { 1, 4, 0x0040 }, /* P9: USB 2.0 (AUO4) (OC4) */
- { 0, 5, 0x0000 }, /* P10: Empty */
- { 0, 5, 0x0000 }, /* P11: Empty */
- { 0, 5, 0x0000 }, /* P12: Empty */
- { 1, 5, 0x0040 }, /* P13: Bluetooth (no OC) */
- },
- .usb3 = {
- .mode = XHCI_MODE,
- .hs_port_switch_mask = XHCI_PORTS,
- .preboot_support = XHCI_PREBOOT,
- .xhci_streams = XHCI_STREAMS,
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0x00, 0xA4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
}
void mainboard_early_init(int s3resume)
diff --git a/src/mainboard/intel/dcp847ske/devicetree.cb b/src/mainboard/intel/dcp847ske/devicetree.cb
index 8850436..37304f2 100644
--- a/src/mainboard/intel/dcp847ske/devicetree.cb
+++ b/src/mainboard/intel/dcp847ske/devicetree.cb
@@ -11,6 +11,25 @@
# Enable DVI Hotplug with 6ms pulse
register "gpu_dp_b_hotplug" = "0x06"
+ # 1333MHz RAM frequency
+ register "max_mem_clock_mhz" = "666"
+
+ register "usb_port_config" = "{
+ {1, 0, 0x0040},
+ {1, 0, 0x0040},
+ {1, 1, 0x0040},
+ {1, 1, 0x0040},
+ {1, 2, 0x0040},
+ {1, 2, 0x0040},
+ {1, 3, 0x0040},
+ {0, 3, 0x0040},
+ {0, 4, 0x0040},
+ {0, 4, 0x0040},
+ {0, 5, 0x0040},
+ {0, 5, 0x0040},
+ {0, 6, 0x0040},
+ {0, 6, 0x0040}, }"
+
device domain 0 on
device ref host_bridge on end # Host bridge
device ref peg10 off end # PCIe Bridge for discrete graphics
diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c
index e7b936a..d0decb4 100644
--- a/src/mainboard/intel/dcp847ske/romstage.c
+++ b/src/mainboard/intel/dcp847ske/romstage.c
@@ -1,44 +1,14 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-#include <arch/hpet.h>
#include <stdint.h>
-#include <northbridge/intel/sandybridge/sandybridge.h>
-#if CONFIG(USE_NATIVE_RAMINIT)
-#include <northbridge/intel/sandybridge/raminit_native.h>
-#else
#include <northbridge/intel/sandybridge/raminit.h>
-#endif
#include <southbridge/intel/bd82x6x/pch.h>
-#if !CONFIG(USE_NATIVE_RAMINIT)
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 0,
- .gbe_enable = 1,
- .max_ddr3_freq = 1333,
- .usb_port_config = {
-#define USB_CONFIG(enabled, current, ocpin) { enabled, ocpin, 0x040 * current }
-#include "usb.h"
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xa0, 0x00, 0xa2, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
}
-#endif
diff --git a/src/mainboard/intel/emeraldlake2/devicetree.cb b/src/mainboard/intel/emeraldlake2/devicetree.cb
index ea17cc8..a7f5d3b 100644
--- a/src/mainboard/intel/emeraldlake2/devicetree.cb
+++ b/src/mainboard/intel/emeraldlake2/devicetree.cb
@@ -11,6 +11,23 @@
# Enable DVI Hotplug with 6ms pulse
register "gpu_dp_b_hotplug" = "0x06"
+ register "max_mem_clock_mhz" = "800"
+
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 1, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 2, 0x0040 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 1, 6, 0x0040 },
+ { 1, 5, 0x0040 }, }"
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/intel/emeraldlake2/early_init.c b/src/mainboard/intel/emeraldlake2/early_init.c
index c697ef2..853add4 100644
--- a/src/mainboard/intel/emeraldlake2/early_init.c
+++ b/src/mainboard/intel/emeraldlake2/early_init.c
@@ -50,44 +50,9 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 0,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- { 1, 0, 0x0040 }, /* P0: Front port (OC0) */
- { 1, 1, 0x0040 }, /* P1: Back port (OC1) */
- { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */
- { 1, 0, 0x0040 }, /* P3: MMC (no OC) */
- { 1, 2, 0x0040 }, /* P4: Front port (OC2) */
- { 0, 0, 0x0000 }, /* P5: Empty */
- { 0, 0, 0x0000 }, /* P6: Empty */
- { 0, 0, 0x0000 }, /* P7: Empty */
- { 1, 4, 0x0040 }, /* P8: Back port (OC4) */
- { 1, 4, 0x0040 }, /* P9: MINIPCIE3 (no OC) */
- { 1, 4, 0x0040 }, /* P10: BLUETOOTH (no OC) */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 1, 6, 0x0040 }, /* P12: Back port (OC6) */
- { 1, 5, 0x0040 }, /* P13: Back port (OC5) */
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = { 0xa0, 0x00, 0xa4, 0x00 };
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
diff --git a/src/mainboard/kontron/ktqm77/devicetree.cb b/src/mainboard/kontron/ktqm77/devicetree.cb
index e07cdf2..853a410 100644
--- a/src/mainboard/kontron/ktqm77/devicetree.cb
+++ b/src/mainboard/kontron/ktqm77/devicetree.cb
@@ -2,6 +2,29 @@
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(0)"
+ register "max_mem_clock_mhz" = "800"
+ register "ec_present" = "1"
+
+ register "usb3.hs_port_switch_mask" = "0xf"
+ register "usb3.mode" = "3"
+ register "usb3.preboot_support" = "1"
+ register "usb3.xhci_streams" = "1"
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 }, }"
+
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/kontron/ktqm77/early_init.c b/src/mainboard/kontron/ktqm77/early_init.c
index 43cd7ac..e8fa6b1 100644
--- a/src/mainboard/kontron/ktqm77/early_init.c
+++ b/src/mainboard/kontron/ktqm77/early_init.c
@@ -55,54 +55,9 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .gbe_enable = 1,
- .ddr3lv_support = 0,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* enabled USB oc pin length */
- { 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */
- { 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */
- { 1, 0, 0x0040 }, /* P2: lower right USB 3.0 (OC0) */
- { 1, 0, 0x0040 }, /* P3: upper right USB 3.0 (OC0) */
- { 1, 0, 0x0040 }, /* P4: lower USB 2.0 (OC0) */
- { 1, 0, 0x0040 }, /* P5: upper USB 2.0 (OC0) */
- { 1, 0, 0x0040 }, /* P6: front panel USB 2.0 (OC0) */
- { 1, 0, 0x0040 }, /* P7: front panel USB 2.0 (OC0) */
- { 1, 4, 0x0040 }, /* P8: internal USB 2.0 (OC4) */
- { 1, 4, 0x0040 }, /* P9: internal USB 2.0 (OC4) */
- { 1, 4, 0x0040 }, /* P10: internal USB 2.0 (OC4) */
- { 1, 4, 0x0040 }, /* P11: internal USB 2.0 (OC4) */
- { 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */
- { 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */
- },
- .usb3 = {
- .mode = 3, /* Smart Auto? */
- .hs_port_switch_mask = 0xf, /* All four ports. */
- .preboot_support = 1, /* preOS driver? */
- .xhci_streams = 1, /* Enable. */
- },
- .pcie_init = 1,
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0x00, 0xA4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
diff --git a/src/mainboard/lenovo/x220/devicetree.cb b/src/mainboard/lenovo/x220/devicetree.cb
index 7a99599..049eea6 100644
--- a/src/mainboard/lenovo/x220/devicetree.cb
+++ b/src/mainboard/lenovo/x220/devicetree.cb
@@ -15,6 +15,25 @@
register "gpu_cpu_backlight" = "0x1155"
register "gpu_pch_backlight" = "0x06100610"
+ register "ec_present" = "1" # I have an embedded controller
+ register "max_mem_clock_mhz" = "666" # So DDR3 freq = 1333
+
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 1, 0x0080 },
+ { 1, 3, 0x0080 },
+ { 1, 3, 0x0080 },
+ { 1, 0, 0x0080 },
+ { 1, 0, 0x0080 },
+ { 1, 2, 0x0040 },
+ { 1, 2, 0x0040 },
+ { 1, 6, 0x0080 },
+ { 1, 5, 0x0080 },
+ { 1, 6, 0x0080 },
+ { 1, 6, 0x0080 },
+ { 1, 7, 0x0080 },
+ { 1, 6, 0x0080 },}"
+
device domain 0 on
subsystemid 0x17aa 0x21db inherit
diff --git a/src/mainboard/lenovo/x220/early_init.c b/src/mainboard/lenovo/x220/early_init.c
index 78112eb..8edb0dd 100644
--- a/src/mainboard/lenovo/x220/early_init.c
+++ b/src/mainboard/lenovo/x220/early_init.c
@@ -9,45 +9,9 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0x00,0xa2,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .gbe_enable = 1,
- .max_ddr3_freq = 1333,
- .usb_port_config = {
- { 1, 0, 0x0040 },
- { 1, 1, 0x0080 },
- { 1, 3, 0x0080 },
- { 1, 3, 0x0080 },
- { 1, 0, 0x0080 },
- { 1, 0, 0x0080 },
- { 1, 2, 0x0040 },
- { 1, 2, 0x0040 },
- { 1, 6, 0x0080 },
- { 1, 5, 0x0080 },
- { 1, 6, 0x0080 },
- { 1, 6, 0x0080 },
- { 1, 7, 0x0080 },
- { 1, 6, 0x0080 },
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xa0, 0x00, 0xa2, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
}
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
diff --git a/src/mainboard/roda/rv11/variants/rv11/devicetree.cb b/src/mainboard/roda/rv11/variants/rv11/devicetree.cb
index 81037e8..0e952b7 100644
--- a/src/mainboard/roda/rv11/variants/rv11/devicetree.cb
+++ b/src/mainboard/roda/rv11/variants/rv11/devicetree.cb
@@ -17,6 +17,30 @@
register "gpu_cpu_backlight" = "0x0000001a"
register "gpu_pch_backlight" = "0x002e0000"
+ register "usb3.mode" = "3"
+ register "usb3.hs_port_switch_mask" = "0xf"
+ register "usb3.preboot_support" = "1"
+ register "usb3.xhci_streams" = "1"
+
+ register "ec_present" = "1"
+ register "max_mem_clock_mhz" = "800"
+
+ register "usb_port_config" = "{
+ { 1, 0, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 1, 0x0080 },
+ { 1, 2, 0x0080 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 3, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 5, 0x0040 }, }"
+
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/roda/rv11/variants/rv11/early_init.c b/src/mainboard/roda/rv11/variants/rv11/early_init.c
index 9386620..328de9d 100644
--- a/src/mainboard/roda/rv11/variants/rv11/early_init.c
+++ b/src/mainboard/roda/rv11/variants/rv11/early_init.c
@@ -9,54 +9,12 @@
void mainboard_fill_pei_data(struct pei_data *const pei_data)
{
- const struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .gbe_enable = 1,
- .ddr3lv_support = 0,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* Enabled / OC PIN / Length */
- { 1, 0, 0x0040 }, /* P00: 1st USB3 (OC #0) */
- { 1, 4, 0x0040 }, /* P01: 2nd USB3 (OC #4) */
- { 1, 1, 0x0080 }, /* P02: 1st Multibay USB3 (OC #1) */
- { 1, 2, 0x0080 }, /* P03: 2nd Multibay USB3 (OC #2) */
- { 1, 8, 0x0040 }, /* P04: MiniPCIe 1 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P05: MiniPCIe 2 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P06: MiniPCIe 3 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P07: GPS USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P08: MiniPCIe 4 USB2 (no OC) */
- { 1, 3, 0x0040 }, /* P09: Express Card USB2 (OC #3) */
- { 1, 8, 0x0040 }, /* P10: SD card reader USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P11: Sensors Hub? USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P12: Touch Screen USB2 (no OC) */
- { 1, 5, 0x0040 }, /* P13: reserved? USB2 (OC #5) */
- },
- .usb3 = {
- .mode = 3, /* Smart Auto? */
- .hs_port_switch_mask = 0xf, /* All four ports. */
- .preboot_support = 1, /* preOS driver? */
- .xhci_streams = 1, /* Enable. */
- },
- .pcie_init = 1,
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0x00, 0xA4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if need to enable peg10 in devicetree */
+ pei_data->pcie_init = 1;
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
diff --git a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
index 79c182e..d2c38f3 100644
--- a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
+++ b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
@@ -17,6 +17,29 @@
register "gpu_cpu_backlight" = "0x00000ac8"
register "gpu_pch_backlight" = "0x13120000"
+ register "ec_present" = "1"
+ register "max_mem_clock_mhz" = "800"
+
+ register "usb3.mode" = "3"
+ register "usb3.hs_port_switch_mask" = "0xf"
+ register "usb3.preboot_support" = "1"
+ register "usb3.xhci_streams" = "1"
+ register "usb_port_config" = "{
+ { 1, 0, 0x0080 },
+ { 1, 0, 0x0080 },
+ { 1, 1, 0x0080 },
+ { 1, 1, 0x0080 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0080 },
+ { 1, 4, 0x0080 },
+ { 1, 5, 0x0040 },
+ { 1, 8, 0x0040 },
+ { 1, 8, 0x0080 },
+ { 1, 6, 0x0080 }, }"
+
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/roda/rv11/variants/rw11/early_init.c b/src/mainboard/roda/rv11/variants/rw11/early_init.c
index b3378ba..ffe095d 100644
--- a/src/mainboard/roda/rv11/variants/rw11/early_init.c
+++ b/src/mainboard/roda/rv11/variants/rw11/early_init.c
@@ -39,54 +39,12 @@
void mainboard_fill_pei_data(struct pei_data *const pei_data)
{
- const struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0xA2, 0xA4, 0xA6 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .gbe_enable = 1,
- .ddr3lv_support = 0,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* Enabled / OC PIN / Length */
- { 1, 0, 0x0080 }, /* P00: 1st (left) USB3 (OC #0) */
- { 1, 0, 0x0080 }, /* P01: 2nd (left) USB3 (OC #0) */
- { 1, 1, 0x0080 }, /* P02: 1st Multibay USB3 (OC #1) */
- { 1, 1, 0x0080 }, /* P03: 2nd Multibay USB3 (OC #1) */
- { 1, 8, 0x0040 }, /* P04: MiniPCIe 1 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P05: MiniPCIe 2 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P06: USB Hub x4 USB2 (no OC) */
- { 1, 8, 0x0040 }, /* P07: MiniPCIe 4 USB2 (no OC) */
- { 1, 8, 0x0080 }, /* P08: SD card reader USB2 (no OC) */
- { 1, 4, 0x0080 }, /* P09: 3rd (right) USB2 (OC #4) */
- { 1, 5, 0x0040 }, /* P10: 4th (right) USB2 (OC #5) */
- { 1, 8, 0x0040 }, /* P11: 3rd Multibay USB2 (no OC) */
- { 1, 8, 0x0080 }, /* P12: misc internal USB2 (no OC) */
- { 1, 6, 0x0080 }, /* P13: misc internal USB2 (OC #6) */
- },
- .usb3 = {
- .mode = 3, /* Smart Auto? */
- .hs_port_switch_mask = 0xf, /* All four ports. */
- .preboot_support = 1, /* preOS driver? */
- .xhci_streams = 1, /* Enable. */
- },
- .pcie_init = 1,
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xA0, 0xA2, 0xA4, 0xA6};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if need to enable peg10 in devicetree */
+ pei_data->pcie_init = 1;
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb
index febaade..a8efd67 100644
--- a/src/mainboard/samsung/lumpy/devicetree.cb
+++ b/src/mainboard/samsung/lumpy/devicetree.cb
@@ -17,8 +17,25 @@
register "gpu_cpu_backlight" = "0x000001e8"
register "gpu_pch_backlight" = "0x03d00000"
+ register "ec_present" = "1"
register "max_mem_clock_mhz" = "666"
+ register "usb_port_config" = "{
+ { 1, 0, 0x0080 },
+ { 1, 1, 0x0080 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 0, 4, 0x0000 },}"
+
device domain 0 on
subsystemid 0x1ae0 0xc000 inherit
device ref host_bridge on end # host bridge
diff --git a/src/mainboard/samsung/lumpy/early_init.c b/src/mainboard/samsung/lumpy/early_init.c
index 3f515ec..495d04e 100644
--- a/src/mainboard/samsung/lumpy/early_init.c
+++ b/src/mainboard/samsung/lumpy/early_init.c
@@ -115,44 +115,13 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0x00,0x00,0x00 },
- .ts_addresses = { 0x30, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .max_ddr3_freq = 1333,
- .usb_port_config = {
- { 1, 0, 0x0080 }, /* P0: Port 0 (OC0) */
- { 1, 1, 0x0080 }, /* P1: Port 1 (OC1) */
- { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */
- { 1, 0, 0x0040 }, /* P3: MMC (no OC) */
- { 0, 0, 0x0000 }, /* P4: Empty */
- { 0, 0, 0x0000 }, /* P5: Empty */
- { 0, 0, 0x0000 }, /* P6: Empty */
- { 0, 0, 0x0000 }, /* P7: Empty */
- { 1, 4, 0x0040 }, /* P8: MINIPCIE2 (no OC) */
- { 0, 4, 0x0000 }, /* P9: Empty */
- { 0, 4, 0x0000 }, /* P10: Empty */
- { 1, 4, 0x0040 }, /* P11: Camera (no OC) */
- { 0, 4, 0x0000 }, /* P12: Empty */
- { 0, 4, 0x0000 }, /* P13: Empty */
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xa0, 0x00, 0x00, 0x00};
+ const uint8_t tsaddr[] = {0x30, 0x00, 0x00, 0x00};
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+ /* Only this board uses .ts_addresses. Fill here to allow removal from devicetree. */
+ memcpy(pei_data->ts_addresses, &tsaddr, sizeof(pei_data->ts_addresses));
memcpy(pei_data->spd_data[2], locate_spd(), 256);
}
diff --git a/src/mainboard/samsung/stumpy/devicetree.cb b/src/mainboard/samsung/stumpy/devicetree.cb
index 4147b16..6847726 100644
--- a/src/mainboard/samsung/stumpy/devicetree.cb
+++ b/src/mainboard/samsung/stumpy/devicetree.cb
@@ -11,6 +11,22 @@
register "max_mem_clock_mhz" = "666"
+ register "usb_port_config" = "{
+ { 1, 0, 0x0080 },
+ { 1, 1, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 0, 0x0040 },
+ { 1, 2, 0x0080 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 0, 0, 0x0000 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 1, 4, 0x0040 },
+ { 0, 4, 0x0000 },
+ { 1, 6, 0x0040 },
+ { 1, 5, 0x0040 }, }"
+
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
diff --git a/src/mainboard/samsung/stumpy/early_init.c b/src/mainboard/samsung/stumpy/early_init.c
index 14fc252..d4c1cc5 100644
--- a/src/mainboard/samsung/stumpy/early_init.c
+++ b/src/mainboard/samsung/stumpy/early_init.c
@@ -91,44 +91,11 @@
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- struct pei_data pei_data_template = {
- .pei_version = PEI_VERSION,
- .mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE,
- .dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE,
- .epbar = CONFIG_FIXED_EPBAR_MMIO_BASE,
- .pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS,
- .smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = HPET_BASE_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBA,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xa0, 0x00,0xa4,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 0,
- .max_ddr3_freq = 1333,
- .usb_port_config = {
- { 1, 0, 0x0080 }, /* P0: Front port (OC0) */
- { 1, 1, 0x0040 }, /* P1: Back port (OC1) */
- { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */
- { 1, 0, 0x0040 }, /* P3: MMC (no OC) */
- { 1, 2, 0x0080 }, /* P4: Front port (OC2) */
- { 0, 0, 0x0000 }, /* P5: Empty */
- { 0, 0, 0x0000 }, /* P6: Empty */
- { 0, 0, 0x0000 }, /* P7: Empty */
- { 1, 4, 0x0040 }, /* P8: Back port (OC4) */
- { 1, 4, 0x0040 }, /* P9: MINIPCIE3 (no OC) */
- { 1, 4, 0x0040 }, /* P10: BLUETOOTH (no OC) */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 1, 6, 0x0040 }, /* P12: Back port (OC6) */
- { 1, 5, 0x0040 }, /* P13: Back port (OC5) */
- },
- };
- *pei_data = pei_data_template;
+ const uint8_t spdaddr[] = {0xa0, 0x00, 0xa4, 0x00};
+
+ memcpy(pei_data->spd_addresses, &spdaddr, sizeof(pei_data->spd_addresses));
+
+ /* TODO: Confirm if nortbridge_fill_pei_data() gets .system_type right (should be 0) */
}
void mainboard_get_spd(spd_raw_data *spd, bool id_only)