| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mfcsi.c |
| * |
| * Feature bank interleaving support (AKA Chip Select Interleaving ) |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem/Feat/Csintlv) |
| * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * *************************************************************************** |
| * |
| */ |
| |
| |
| /* This file contains functions for Chip Select interleaving */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "amdlib.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mt.h" |
| #include "mfcsi.h" |
| #include "Ids.h" |
| #include "GeneralServices.h" |
| #include "Filecode.h" |
| CODE_GROUP (G2_PEI) |
| RDATA_GROUP (G2_PEI) |
| |
| #define FILECODE PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| BOOLEAN |
| STATIC |
| MemFDctInterleaveBanks ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| STATIC |
| CsIntSwap ( |
| IN OUT UINT32 *BaseMaskRegPtr, |
| IN UINT8 EnChipSels, |
| IN UINT8 LoBit, |
| IN UINT8 HiBit |
| ); |
| |
| BOOLEAN |
| MemFUndoInterleaveBanks ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| /* |
| *----------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *----------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * |
| * This function Applies DIMM bank (chip-select) interleaving if enabled |
| * and if all criteria are met. Interleaves chip-selects on page boundaries. |
| * This function calls subfunctions that sets up CS interleaving on multiple Sockets |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * |
| * @return TRUE - This feature is enabled. |
| * @return FALSE - This feature is not enabled. |
| */ |
| |
| BOOLEAN |
| MemFInterleaveBanks ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ) |
| { |
| UINT8 Dct; |
| BOOLEAN RetFlag; |
| |
| ASSERT (NBPtr != NULL); |
| |
| RetFlag = FALSE; |
| if (NBPtr->RefPtr->EnableBankIntlv) { |
| if (NBPtr->MCTPtr->NodeMemSize) { |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| RetFlag |= MemFDctInterleaveBanks (NBPtr); |
| } |
| } |
| } |
| return RetFlag; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * |
| * This function checks if bank interleaving has been enabled or not. If yes, it will |
| * undo bank interleaving. Otherwise, it does nothing. |
| * |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * |
| * @return TRUE - Bank interleaving has been enabled. |
| * @return FALSE - Bank interleaving has not been enabled. |
| */ |
| |
| BOOLEAN |
| MemFUndoInterleaveBanks ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ) |
| { |
| UINT8 Cs; |
| UINT8 Dct; |
| UINT32 CSMask; |
| BOOLEAN CSIntlvEnabled; |
| BOOLEAN RetFlag; |
| |
| ASSERT (NBPtr != NULL); |
| |
| RetFlag = FALSE; |
| |
| if (NBPtr->RefPtr->EnableBankIntlv) { |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| if (NBPtr->DCTPtr->Timings.DctMemSize) { |
| CSIntlvEnabled = FALSE; |
| for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { |
| if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { |
| CSMask = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); |
| if (((CSMask >> 5) & 0x1FF) != 0x1FF) { |
| CSIntlvEnabled = TRUE; |
| break; |
| } |
| } |
| } |
| if (CSIntlvEnabled) { |
| MemFDctInterleaveBanks (NBPtr); |
| RetFlag = TRUE; |
| } |
| } |
| } |
| } |
| return RetFlag; |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * |
| * This function Applies DIMM bank (chip-select) interleaving if enabled |
| * and if all criteria are met. Interleaves chip-selects on page boundaries. |
| * This function is run once per Socket |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * |
| * @return TRUE - Register bits have been swapped. |
| * @return FALSE - Register bits have not been swapped. |
| * |
| */ |
| |
| BOOLEAN |
| STATIC |
| MemFDctInterleaveBanks ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ) |
| { |
| UINT8 Cs; |
| UINT8 EnChipSels; |
| UINT8 BankEncd; |
| UINT8 BankEncd0; |
| UINT8 i; |
| UINT8 j; |
| UINT32 BankAddrReg; |
| UINT32 BaseRegS0; |
| UINT32 BaseRegS1; |
| UINT32 MaskReg; |
| UINT8 Offset; |
| UINT8 Dct; |
| |
| ASSERT (NBPtr != NULL); |
| |
| Dct = NBPtr->Dct; |
| |
| // Check if CS interleaving can be enabled |
| EnChipSels = 0; |
| BankEncd0 = 0xFF; |
| Offset = 0; |
| for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { |
| if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 3) != 0) { |
| BankAddrReg = NBPtr->GetBitField (NBPtr, BFDramBankAddrReg); |
| BankEncd = (UINT8) ((BankAddrReg >> ((Cs / 2) * 4)) & 0xF); |
| if (BankEncd0 == 0xFF) { |
| BankEncd0 = BankEncd; |
| } else if (BankEncd0 != BankEncd) { |
| break; |
| } |
| if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { |
| EnChipSels++; |
| } |
| } |
| } |
| |
| // Swap Dram Base/Mask Addr to enable CS interleaving |
| if ((Cs == MAX_CS_PER_CHANNEL) && ((EnChipSels == 2) || (EnChipSels == 4) || (EnChipSels == 8))) { |
| NBPtr->TechPtr->GetCSIntLvAddr (BankEncd0, &i, &j); |
| NBPtr->DCTPtr->BankAddrMap = BankEncd0; |
| NBPtr->DCTPtr->EnabledChipSels = EnChipSels; |
| // Family specific CS interleaving low address adjustment |
| NBPtr->FamilySpecificHook[AdjustCSIntLvLowAddr] (NBPtr, &i); |
| |
| if (NBPtr->MCTPtr->Status[Sb128bitmode]) { |
| i++; |
| j++; |
| } |
| |
| for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs += 2) { |
| // |
| // LRDIMMS - Add an offset to the bit positions specified based on D18F2x[6C:60]_dct[1:0][RankDef] as follows: |
| // RankDef=0xb: 0 RankDef=10b: 1 RankDef=11b: 2 |
| // Using RankMult information: Lo/HiBit <<= (Mult >> 1) |
| // |
| if (NBPtr->MCTPtr->Status[SbLrdimms]) { |
| Offset = ((NBPtr->ChannelPtr->LrDimmRankMult[Cs >> 1]) >> 1); |
| } |
| BaseRegS0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs); |
| BaseRegS1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1); |
| if (((BaseRegS0 | BaseRegS1) & 1) != 0) { |
| // Swap Mask register bits |
| MaskReg = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); |
| CsIntSwap (&MaskReg, EnChipSels, (i + Offset), (j + Offset)); |
| NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (Cs / 2), MaskReg); |
| |
| // Swap Base register bits |
| CsIntSwap (&BaseRegS0, EnChipSels, (i + Offset), (j + Offset)); |
| NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs, BaseRegS0); |
| CsIntSwap (&BaseRegS1, EnChipSels, (i + Offset), (j + Offset)); |
| NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1, BaseRegS1); |
| } |
| } |
| // |
| // Bank Interleaving is requested and has been enabled as well |
| // |
| NBPtr->MCTPtr->DctData[Dct].BkIntDis = FALSE; |
| return TRUE; |
| } else { |
| // |
| // Bank Interleaving is requested but cannot be enabled |
| // |
| PutEventLog (AGESA_WARNING, MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); |
| SetMemError (AGESA_WARNING, NBPtr->MCTPtr); |
| NBPtr->MCTPtr->DctData[Dct].BkIntDis = TRUE; |
| } |
| return FALSE; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This supporting function swaps Chip selects |
| * |
| * @param[in,out] *BaseMaskRegPtr - Pointer to the Mask Register |
| * @param[in] *EnChipSels - Chip Selects to Enable |
| * @param[in] *LoBit - Lowest Bit |
| * @param[in] *HiBit - Highest Bit |
| * |
| * |
| */ |
| |
| VOID |
| STATIC |
| CsIntSwap ( |
| IN OUT UINT32 *BaseMaskRegPtr, |
| IN UINT8 EnChipSels, |
| IN UINT8 LoBit, |
| IN UINT8 HiBit |
| ) |
| { |
| UINT8 BitDelta; |
| UINT32 TempHi; |
| UINT32 TempLo; |
| UINT32 AddrLoMask; |
| UINT32 AddrHiMask; |
| |
| ASSERT (BaseMaskRegPtr != NULL); |
| ASSERT (HiBit > LoBit); |
| |
| BitDelta = HiBit - LoBit; |
| AddrLoMask = (((UINT32)EnChipSels) - 1) << LoBit; |
| AddrHiMask = AddrLoMask << BitDelta; |
| |
| TempHi = TempLo = *BaseMaskRegPtr; |
| TempLo &= AddrLoMask; |
| TempLo <<= BitDelta; // move lower bits to upper bit position |
| TempHi &= AddrHiMask; |
| TempHi >>= BitDelta; // move upper bits to lower bit position |
| |
| *BaseMaskRegPtr &= ~AddrLoMask; |
| *BaseMaskRegPtr &= ~AddrHiMask; |
| *BaseMaskRegPtr |= TempLo | TempHi; |
| } |