blob: 11303a024d5c9594c5ad91d9c7c1e2e520696dac [file] [log] [blame]
/* $NoKeywords:$ */
/**
* @file
*
* Config Fch SATA (IDE mode) controller
*
* Init SATA IDE (Native IDE) mode features.
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: FCH
* @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
*
*/
/*
*****************************************************************************
*
* Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#include "Filecode.h"
#define FILECODE PROC_FCH_SATA_SATAIDEENV_FILECODE
/**
* FchInitEnvSataIde - Config SATA IDE controller before PCI
* emulation
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitEnvSataIde (
IN VOID *FchDataPtr
)
{
UINT8 ChannelByte;
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
//
// Class code
//
if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) {
RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01018A40, StdHeader);
} else {
RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01018F40, StdHeader);
}
//
// Device ID
//
RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_DID, StdHeader);
//
// SSID
//
if (LocalCfgPtr->Sata.SataIdeSsid != 0 ) {
RwPci ((SATA_BUS_DEV_FUN << 16) + 0x2C, AccessWidth32, 0x00, LocalCfgPtr->Sata.SataIdeSsid, StdHeader);
}
ChannelByte = 0x00;
ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x48 + 3), AccessWidth8, &ChannelByte, StdHeader);
ChannelByte &= 0xCF;
if ( LocalCfgPtr->Sata.SataDisUnusedIdePChannel ) {
ChannelByte |= 0x10;
}
if ( LocalCfgPtr->Sata.SataDisUnusedIdeSChannel ) {
ChannelByte |= 0x20;
}
WritePci (((SATA_BUS_DEV_FUN << 16) + 0x48 + 3), AccessWidth8, &ChannelByte, StdHeader);
}