blob: c176d1e5e1f58cacfa522d2bbf56c8b81f50edfd [file] [log] [blame]
/* $NoKeywords:$ */
/**
* @file
*
* Config Fch Imc controller
*
* Init Imc Controller features.
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: FCH
* @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
*
*/
/*
*****************************************************************************
*
* Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#include "Filecode.h"
#define FILECODE PROC_FCH_IMC_FAMILY_YANGTZE_YANGTZEIMCSERVICE_FILECODE
//
// Declaration of local functions
//
/**
* SoftwareToggleImcStrapping - Software Toggle IMC Firmware Strapping.
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
SoftwareToggleImcStrapping (
IN VOID *FchDataPtr
)
{
UINT8 ValueByte;
AMD_CONFIG_PARAMS *StdHeader;
FCH_DATA_BLOCK *LocalCfgPtr;
StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
if ( LocalCfgPtr->Imc.ImcEnableOverWrite == 1 ) {
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD6 + 1, AccessWidth8, 0x7F, BIT7);
ValueByte = 0x0;
while (ValueByte == 0) {
FchStall (10000, StdHeader);
ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG40, AccessWidth8, &ValueByte, StdHeader);
ValueByte &= 0x80;
};
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGC4, AccessWidth8, 0xF7, 0x08);
EnterEcConfig (StdHeader);
RwEc8 (FCH_EC_REG07, 0x00, 0x09, StdHeader); ///switch to device 9 (Mailbox)
RwEc8 (FCH_EC_REG60, 0x00, (MailBoxPort >> 8), StdHeader); ///set MSB of Mailbox port
RwEc8 (FCH_EC_REG61, 0x00, (MailBoxPort & 0xFF), StdHeader); ///set LSB of Mailbox port
RwEc8 (FCH_EC_REG30, 0x00, 0x01, StdHeader); ///;Enable Mailbox Registers Interface, bit0=1
RwMem (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB3, AccessWidth8, (UINT32)~BIT6, BIT6);
ExitEcConfig (StdHeader);
ImcSleep (FchDataPtr);
} else {
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD6 + 1, AccessWidth8, 0x7F, 0);
}
}