mainboard/kontron/ktqm77: Fix usage of GNU field designator ext
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: If948960abbd927aa6d2b471a42a2321a04d992f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5824
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c
index b5959b1..7385cd0 100644
--- a/src/mainboard/kontron/ktqm77/romstage.c
+++ b/src/mainboard/kontron/ktqm77/romstage.c
@@ -157,34 +157,34 @@
u16 pm1_sts;
struct pei_data pei_data = {
- pei_version: PEI_VERSION,
- mchbar: DEFAULT_MCHBAR,
- dmibar: DEFAULT_DMIBAR,
- epbar: DEFAULT_EPBAR,
- pciexbar: CONFIG_MMCONF_BASE_ADDRESS,
- smbusbar: SMBUS_IO_BASE,
- wdbbar: 0x4000000,
- wdbsize: 0x1000,
- hpet_address: CONFIG_HPET_ADDRESS,
- rcba: DEFAULT_RCBABASE,
- pmbase: DEFAULT_PMBASE,
- gpiobase: DEFAULT_GPIOBASE,
- thermalbase: 0xfed08000,
- system_type: 0, // 0 Mobile, 1 Desktop/Server
- tseg_size: CONFIG_SMM_TSEG_SIZE,
- spd_addresses: { 0xA0, 0x00,0xA4,0x00 },
- ts_addresses: { 0x00, 0x00, 0x00, 0x00 },
- ec_present: 1,
- gbe_enable: 1,
- ddr3lv_support: 0,
+ .pei_version = PEI_VERSION,
+ .mchbar = DEFAULT_MCHBAR,
+ .dmibar = DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = CONFIG_HPET_ADDRESS,
+ .rcba = DEFAULT_RCBABASE,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .thermalbase = 0xfed08000,
+ .system_type = 0, // 0 Mobile, 1 Desktop/Server
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
+ .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
+ .ec_present = 1,
+ .gbe_enable = 1,
+ .ddr3lv_support = 0,
// 0 = leave channel enabled
// 1 = disable dimm 0 on channel
// 2 = disable dimm 1 on channel
// 3 = disable dimm 0+1 on channel
- dimm_channel0_disabled: 2,
- dimm_channel1_disabled: 2,
- max_ddr3_freq: 1600,
- usb_port_config: {
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_port_config = {
/* enabled usb oc pin length */
{ 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */
{ 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */
@@ -201,13 +201,13 @@
{ 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */
},
- usb3: {
- mode: 3, /* Smart Auto? */
- hs_port_switch_mask: 0xf, /* All four ports. */
- preboot_support: 1, /* preOS driver? */
- xhci_streams: 1, /* Enable. */
+ .usb3 = {
+ .mode = 3, /* Smart Auto? */
+ .hs_port_switch_mask = 0xf, /* All four ports. */
+ .preboot_support = 1, /* preOS driver? */
+ .xhci_streams = 1, /* Enable. */
},
- pcie_init: 1,
+ .pcie_init = 1,
};
timestamp_init(get_initial_timestamp());