sandy/ivy: Fix PIRQs on Chromebooks
This partially reverts commit 33b535f1. After this commit, samsung/lumpy had its
internal USB EHCI controller broken, with no assigned IRQ.
PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive
for the GPIO to use. They cannot be used for PCI devices at the same time.
Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9993
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
diff --git a/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl
new file mode 100644
index 0000000..7d692b9
--- /dev/null
+++ b/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* This is board specific information: IRQ routing for Sandybridge */
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ If (PICM) {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, 0, 16 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, 0, 22 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, 0, 17 },
+ Package() { 0x001cffff, 1, 0, 18 },
+ Package() { 0x001cffff, 2, 0, 19 },
+ Package() { 0x001cffff, 3, 0, 20 },
+ // EHCI #1 0:1d.0
+ Package() { 0x001dffff, 0, 0, 19 },
+ // EHCI #2 0:1a.0
+ Package() { 0x001affff, 0, 0, 20 },
+ // LPC devices 0:1f.0
+ Package() { 0x001fffff, 0, 0, 21 },
+ Package() { 0x001fffff, 1, 0, 22 },
+ Package() { 0x001fffff, 2, 0, 23 },
+ Package() { 0x001fffff, 3, 0, 16 },
+ })
+ } Else {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 },
+ // EHCI #1 0:1d.0
+ Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
+ // EHCI #2 0:1a.0
+ Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKE, 0 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKF, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 },
+ Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 },
+ Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
+ })
+ }
+}
diff --git a/src/mainboard/samsung/stumpy/dsdt.asl b/src/mainboard/samsung/stumpy/dsdt.asl
index 0a2f37d..365f89a 100644
--- a/src/mainboard/samsung/stumpy/dsdt.asl
+++ b/src/mainboard/samsung/stumpy/dsdt.asl
@@ -48,7 +48,7 @@
{
#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
#include <southbridge/intel/bd82x6x/acpi/pch.asl>
- #include <southbridge/intel/bd82x6x/acpi/default_irq_route.asl>
+ #include "acpi/sandybridge_pci_irqs.asl"
}
}
diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c
index 7fa93b8..8d40d9e 100644
--- a/src/mainboard/samsung/stumpy/romstage.c
+++ b/src/mainboard/samsung/stumpy/romstage.c
@@ -84,7 +84,43 @@
{
u32 reg32;
- southbridge_configure_default_intmap();
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP WLAN INTA -> PIRQB
+ * D28IP_P4IP ETH0 INTB -> PIRQC
+ * D29IP_E1P EHCI1 INTA -> PIRQD
+ * D26IP_E2P EHCI2 INTA -> PIRQE
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQG
+ * D31IP_TTIP THRT INTC -> PIRQH
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP);
+ RCBA32(D30IP) = (NOINT << D30IP_PIP);
+ RCBA32(D29IP) = (INTA << D29IP_E1P);
+ RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP);
+ RCBA32(D27IP) = (INTA << D27IP_ZIP);
+ RCBA32(D26IP) = (INTA << D26IP_E2P);
+ RCBA32(D25IP) = (NOINT << D25IP_LIP);
+ RCBA32(D22IP) = (NOINT << D22IP_MEI1IP);
+
+ /* Device interrupt route registers */
+ DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA);
+ DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG);
+ DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE);
+ DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB);
+ DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH);
+ DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD);
+ DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
+
+ /* Enable IOAPIC (generic) */
+ RCBA16(OIC) = 0x0100;
+ /* PCH BWG says to read back the IOAPIC enable register */
+ (void) RCBA16(OIC);
/* Disable unused devices (board specific) */
reg32 = RCBA32(FD);