## SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/denverton_ns

	# configure pirq routing
	register "pirqa_routing" = "11"
	register "pirqb_routing" = "10"
	register "pirqc_routing" = "06"
	register "pirqd_routing" = "07"
	register "pirqe_routing" = "12"
	register "pirqf_routing" = "14"
	register "pirqg_routing" = "15"
	register "pirqh_routing" = "15"
	# configure device interrupt routing
	register "ir00_routing" = "0x3217" # IR00, Dev31
	register "ir01_routing" = "0x3210" # IR01, Dev22
	register "ir02_routing" = "0x3211" # IR02, Dev23
	register "ir03_routing" = "0x3217" # IR03, Dev5
	register "ir04_routing" = "0x3212" # IR04, Dev6
	register "ir05_routing" = "0x3210" # IR05, Dev24
	register "ir06_routing" = "0x3214" # IR06, Dev19
	register "ir07_routing" = "0x3210" # IR07, Dev9/10/11/12
	register "ir08_routing" = "0x7654" # IR08, Dev14/15/16/17
	register "ir09_routing" = "0x3213" # IR09, Dev21
	register "ir10_routing" = "0x3210" # IR10, Dev26/18
	register "ir11_routing" = "0x3215" # IR11, Dev20
	register "ir12_routing" = "0x3210" # IR12, Dev27
	# configure interrupt polarity control
	register "ipc0" = "0x00ff4000" # IPC0, PIRQA-H (IRQ16-23) should always be ActiveLow
	register "ipc1" = "0x00000000" # IPC1
	register "ipc2" = "0x00000000" # IPC2
	register "ipc3" = "0x00000000" # IPC3

	device cpu_cluster 0 on end

	device domain 0 on
		device pci 00.0 on end # Host Bridge
		device pci 04.0 on end # RAS
		device pci 05.0 on end # RCEC(Root Complex Event Collector)
		device pci 06.0 on end # Virtual root port 2 (QAT)
		device pci 09.0 on end # PCI Express Port 0, cluster #0, x4
		device pci 10.0 on end # PCI Express Port 6, cluster #1, x2
		device pci 11.0 on end # PCI Express Port 7, cluster #1, x2
		device pci 12.0 on end # SMBus Controller 1
		device pci 13.0 on end # SATA Controller 0
		device pci 14.0 on end # SATA Controller 1
		device pci 15.0 on end # XHCI USB Controller
		device pci 16.0 on end # Virtual root port 0 (10GBE0)
		device pci 17.0 on end # Virtual root port 1 (10GBE1)
		device pci 18.0 on end # CSME HECI 1
		device pci 1a.0 on end # UART 0
		device pci 1a.1 off end # UART 1
		device pci 1a.2 off end # UART 2
		device pci 1c.0 on end # eMMC
		device pci 1f.0 on end # LPC bridge
		device pci 1f.2 on end # PMC/ACPI
		device pci 1f.4 on end # SMBus Controller 0
		device pci 1f.5 on end # SPI Controller
	end
end