nb/intel/sandybridge/romstage.c: Configure DPR and initialize TXT
Initialize the DPR register and check if SCLEAN needs to be run.
Allows to reliably boot the platform if ungraceful shutdown occured or
the memory controller has been locked by TXT.
TEST=Dell OptiPlex 9010 with Intel TXT enabled boots successfully
after 4s power button override or power cable unplug when SENTER was
executed. Successfully boot QubesOS 4.0 with TBoot v1.8.2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4b912f121593fa55c11813262f09be1a1055e950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/src/northbridge/intel/sandybridge/romstage.c b/src/northbridge/intel/sandybridge/romstage.c
index d6e7ee9..71b8e12 100644
--- a/src/northbridge/intel/sandybridge/romstage.c
+++ b/src/northbridge/intel/sandybridge/romstage.c
@@ -10,6 +10,9 @@
#include <device/pci_def.h>
#include <device/device.h>
#include <northbridge/intel/sandybridge/chip.h>
+#include <security/intel/txt/txt.h>
+#include <security/intel/txt/txt_platform.h>
+#include <security/intel/txt/txt_register.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/pmclib.h>
#include <elog.h>
@@ -22,6 +25,21 @@
{
}
+static void configure_dpr(void)
+{
+ union dpr_register dpr = txt_get_chipset_dpr();
+
+ /*
+ * Just need to program the size of DPR, enable and lock it.
+ * The dpr.top will always point to TSEG_BASE (updated by hardware).
+ * We do it early because it will be needed later to calculate cbmem_top.
+ */
+ dpr.lock = 1;
+ dpr.epm = 1;
+ dpr.size = CONFIG_INTEL_TXT_DPR_SIZE;
+ pci_write_config32(HOST_BRIDGE, DPR, dpr.raw);
+}
+
static void early_pch_reset_pmcon(void)
{
/* Reset RTC power status */
@@ -60,6 +78,11 @@
post_code(0x39);
+ if (CONFIG(INTEL_TXT)) {
+ configure_dpr();
+ intel_txt_romstage_init();
+ }
+
perform_raminit(s3resume);
post_code(0x3b);