diff --git a/src/Kconfig b/src/Kconfig
index 06d7108..67b5689 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -36,10 +36,6 @@
 source src/superio/Kconfig
 source src/cpu/Kconfig
 
-config CBFS
-	bool
-	default y
-
 config PCI_BUS_SEGN_BITS
 	int
 	default 0
diff --git a/src/arch/i386/Config.lb b/src/arch/i386/Config.lb
index 380d05b..e5e587c 100644
--- a/src/arch/i386/Config.lb
+++ b/src/arch/i386/Config.lb
@@ -1,45 +1,29 @@
-uses CONFIG_CBFS
 uses CONFIG_SMP
 uses CONFIG_PRECOMPRESSED_PAYLOAD
 uses CONFIG_USE_INIT
 uses CONFIG_HAVE_FAILOVER_BOOT
 uses CONFIG_USE_FAILOVER_IMAGE
 uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_CBFS
 
 init init/crt0.S.lb
 
-if CONFIG_CBFS
-	if CONFIG_USE_FAILOVER_IMAGE
-	else
-		initobject /src/lib/cbfs.o
-		initobject /src/lib/lzma.o
-	end
+if CONFIG_USE_FAILOVER_IMAGE
+else
+	initobject /src/lib/cbfs.o
+	initobject /src/lib/lzma.o
 end
 
 if CONFIG_HAVE_FAILOVER_BOOT
 	if CONFIG_USE_FAILOVER_IMAGE
 		ldscript init/ldscript_failover.lb
 	else
-		if CONFIG_CBFS
 			ldscript init/ldscript_cbfs.lb
-		else
-			ldscript init/ldscript.lb
-		end
 	end
 else
-	if CONFIG_CBFS
-		if CONFIG_USE_FALLBACK_IMAGE
-			ldscript init/ldscript_fallback_cbfs.lb
-		else
-			ldscript init/ldscript_cbfs.lb
-		end
+	if CONFIG_USE_FALLBACK_IMAGE
+		ldscript init/ldscript_fallback_cbfs.lb
 	else
-		if CONFIG_USE_FALLBACK_IMAGE
-			ldscript init/ldscript_fallback.lb
-		else
-			ldscript init/ldscript.lb
-		end
+		ldscript init/ldscript_cbfs.lb
 	end
 end
 
@@ -82,13 +66,6 @@
 # catch the case where there is no compression
 makedefine PAYLOAD-1:=payload
 
-if CONFIG_CBFS
-else
-# match the case where a compression type is specified.
-makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_NRV2B):=payload.nrv2b
-makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_LZMA):=payload.lzma
-end
-
 # catch the case where there is precompression. Yes, this bites. 
 if CONFIG_PRECOMPRESSED_PAYLOAD 
 	makedefine PAYLOAD-1:=payload
@@ -105,8 +82,8 @@
 else
 	makerule coreboot.rom 
 		depends	"coreboot.strip buildrom $(PAYLOAD-1)"
-		action "PAYLOAD=$(PAYLOAD-1); if [ $(CONFIG_CBFS) -eq 1 ]; then PAYLOAD=/dev/null; touch cbfs-support; fi; ./buildrom $< $@ $$PAYLOAD $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)"
-		action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 -a $(CONFIG_CBFS) -eq 1 ]; then echo l > cbfs-support; fi"
+		action "touch cbfs-support; ./buildrom $< $@ /dev/null $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)"
+		action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 ]; then echo l > cbfs-support; fi"
 	end
 end
 
diff --git a/src/arch/i386/init/crt0.S.lb b/src/arch/i386/init/crt0.S.lb
index 9e89685..95764ae 100644
--- a/src/arch/i386/init/crt0.S.lb
+++ b/src/arch/i386/init/crt0.S.lb
@@ -74,19 +74,8 @@
 	movl	$0x4000000, %esp
 	movl	%esp, %ebp
 	pushl %esi
-#if CONFIG_CBFS == 1
 	pushl $str_coreboot_ram_name
 	call cbfs_and_run_core
-#else
-	movl	$_liseg, %esi
-	movl	$_iseg,  %edi
-	movl	$_eiseg, %ecx
-	subl	%edi, %ecx
-	pushl %ecx
-	pushl %edi
-	pushl %esi
-	call copy_and_run_core
-#endif
 
 .Lhlt:	
 	intel_chip_post_macro(0xee)	/* post fe */
@@ -148,12 +137,10 @@
 
 #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */
 
-#if CONFIG_CBFS == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 str_coreboot_ram_name:	.string "fallback/coreboot_ram"
-# else
+#else
 str_coreboot_ram_name:	.string "normal/coreboot_ram"
-# endif
 #endif
 
 #endif /* CONFIG_USE_DCACHE_RAM */
diff --git a/src/arch/i386/init/ldscript.lb b/src/arch/i386/init/ldscript.lb
deleted file mode 100644
index 0ed5c47..0000000
--- a/src/arch/i386/init/ldscript.lb
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *	Memory map:
- *
- *	CONFIG_RAMBASE		
- *				: data segment
- *				: bss segment
- *				: heap
- *				: stack
- *	CONFIG_ROMBASE
- *				: coreboot text 
- *				: readonly text
- */
-/*
- * Bootstrap code for the STPC Consumer
- * Copyright (c) 1999 by Net Insight AB. All Rights Reserved.
- *
- */
-
-/*
- *	Written by Johan Rydberg, based on work by Daniel Kahlin.
- *      Rewritten by Eric Biederman
- */
-/*
- *	We use ELF as output format. So that we can
- *	debug the code in some form. 
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-
-/*
-ENTRY(_start)
-*/
-
-TARGET(binary)
-INPUT(coreboot_ram.rom)
-SECTIONS
-{
-	. = CONFIG_ROMBASE;
-
-	.ram . : {
-		_ram = . ;
-		coreboot_ram.rom(*)
-		_eram = . ;
-	}
-
-	/* This section might be better named .setup */
-	.rom . : {
-		_rom = .;
-		*(.rom.text);
-		*(.rom.data);
-		*(.rodata.*);
-		*(.rom.data.*);
-		. = ALIGN(16);
-		_erom = .;
-	}
-
-	_lrom = LOADADDR(.rom);
-	_elrom = LOADADDR(.rom) + SIZEOF(.rom);
-	_iseg = CONFIG_RAMBASE;
-	_eiseg = _iseg + SIZEOF(.ram);
-	_liseg = _ram;
-	_eliseg = _eram;
-
-	/DISCARD/ : {
-		*(.comment)
-		*(.comment.*)
-		*(.note)
-		*(.note.*)
-	}
-}
diff --git a/src/arch/i386/init/ldscript_fallback.lb b/src/arch/i386/init/ldscript_fallback.lb
deleted file mode 100644
index 6d41cbd..0000000
--- a/src/arch/i386/init/ldscript_fallback.lb
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *	Memory map:
- *
- *	CONFIG_RAMBASE		
- *				: data segment
- *				: bss segment
- *				: heap
- *				: stack
- *	CONFIG_ROMBASE
- *				: coreboot text 
- *				: readonly text
- */
-/*
- * Bootstrap code for the STPC Consumer
- * Copyright (c) 1999 by Net Insight AB. All Rights Reserved.
- *
- */
-
-/*
- *	Written by Johan Rydberg, based on work by Daniel Kahlin.
- *      Rewritten by Eric Biederman
- */
-/*
- *	We use ELF as output format. So that we can
- *	debug the code in some form. 
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-
-/*
-ENTRY(_start)
-*/
-
-TARGET(binary)
-INPUT(coreboot_ram.rom)
-SECTIONS
-{
-	. = CONFIG_ROMBASE;
-
-	.ram . : {
-		_ram = . ;
-		coreboot_ram.rom(*)
-		_eram = . ;
-	}
-
-	/* cut _start into last 64k*/
-	_x = .;
-	. = (_x < (CONFIG_ROMBASE - 0x10000 +  CONFIG_ROM_IMAGE_SIZE)) ? (CONFIG_ROMBASE - 0x10000 +  CONFIG_ROM_IMAGE_SIZE) : _x;
-
-	/* This section might be better named .setup */
-	.rom . : {
-		_rom = .;
-		*(.rom.text);
-		*(.rom.data);
-		*(.init.rodata.*);
-		*(.rodata.*);
-		*(.rom.data.*);
-		. = ALIGN(16);
-		_erom = .;
-	}
-
-	_lrom = LOADADDR(.rom);
-	_elrom = LOADADDR(.rom) + SIZEOF(.rom);
-	_iseg = CONFIG_RAMBASE;
-	_eiseg = _iseg + SIZEOF(.ram);
-	_liseg = _ram;
-	_eliseg = _eram;
-
-	/DISCARD/ : {
-		*(.comment)
-		*(.note)
-		*(.comment.*)
-		*(.note.*)
-	}
-}
diff --git a/src/arch/i386/lib/Config.lb b/src/arch/i386/lib/Config.lb
index 0a07e3b..1d434e2 100644
--- a/src/arch/i386/lib/Config.lb
+++ b/src/arch/i386/lib/Config.lb
@@ -1,7 +1,6 @@
 uses CONFIG_USE_INIT
 uses CONFIG_USE_PRINTK_IN_CAR
 uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_CBFS
 
 object c_start.S
 object cpu.c
@@ -15,9 +14,5 @@
 
 if CONFIG_USE_FAILOVER_IMAGE
 else
-	if CONFIG_CBFS
-		initobject cbfs_and_run.o
-	else
-		initobject copy_and_run.o
-	end
+	initobject cbfs_and_run.o
 end
diff --git a/src/arch/i386/lib/copy_and_run.c b/src/arch/i386/lib/copy_and_run.c
deleted file mode 100644
index 9cec90a..0000000
--- a/src/arch/i386/lib/copy_and_run.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* by yhlu 6.2005
-	moved from nrv2v.c and some lines from crt0.S
-   2006/05/02 - stepan: move nrv2b to an extra file.
-*/
-
-#include <console/console.h>
-#include <stdint.h>
-#include <string.h>
-
-#if CONFIG_COMPRESS
-#define ENDIAN   0
-#define BITSIZE 32
-#include "../lib/nrv2b.c"
-#endif
-
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp)
-{
-        unsigned long olen;
-
-#if CONFIG_USE_INIT
-	printk_spew("src=%08x\r\n",src);
-	printk_spew("dst=%08x\r\n",dst);
-#else
-        print_spew("src="); print_spew_hex32((uint32_t)src); print_spew("\r\n");
-        print_spew("dst="); print_spew_hex32((uint32_t)dst); print_spew("\r\n");
-#endif
-
-#if !CONFIG_COMPRESS
-	print_debug("Copying image to RAM.\r\n");
-	memcpy(src, dst, ilen);
-	olen = ilen;
-#else
-	print_debug("Uncompressing image to RAM.\r\n");
-//	dump_mem(src, src+0x100);
-	olen = unrv2b(src, dst, &ilen);
-#endif
-
-//	dump_mem(dst, dst+0x100);
-#if CONFIG_USE_INIT
-	printk_spew("image length = %08x\r\n", olen);
-#else
-	print_spew("image length = "); print_spew_hex32(olen); print_spew("\r\n");
-#endif
-	print_debug("Jumping to image.\r\n");
-
-	__asm__ volatile (
-		"movl %%eax, %%ebp\n\t"
-		"cli\n\t"
-		"jmp     *%%edi\n\t"
-		:: "a"(ebp), "D"(dst)
-	);
-
-}
diff --git a/src/arch/ppc/Config.lb b/src/arch/ppc/Config.lb
index aba64c1..0b06eef 100644
--- a/src/arch/ppc/Config.lb
+++ b/src/arch/ppc/Config.lb
@@ -1,4 +1,3 @@
-uses CONFIG_CBFS
 ldscript init/ldscript.lb
 
 makerule coreboot.strip 
@@ -11,10 +10,8 @@
 	action "cp $< $@"
 end
 
-if CONFIG_CBFS
-	initobject /src/lib/cbfs.o
-	initobject /src/lib/lzma.o
-end
+initobject /src/lib/cbfs.o
+initobject /src/lib/lzma.o
 
 dir init
 dir lib
diff --git a/src/boot/Config.lb b/src/boot/Config.lb
index 700f19d..8afe637 100644
--- a/src/boot/Config.lb
+++ b/src/boot/Config.lb
@@ -1,9 +1,2 @@
 object hardwaremain.o
-if CONFIG_CBFS
-	object selfboot.o
-else
-	object elfboot.o
-end
-if CONFIG_FS_PAYLOAD
-	object filo.o
-end
+object selfboot.o
diff --git a/src/boot/elfboot.c b/src/boot/elfboot.c
deleted file mode 100644
index 958112d..0000000
--- a/src/boot/elfboot.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Eric W. Biederman <ebiederm@xmission.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <part/fallback_boot.h>
-#include <boot/elf.h>
-#include <boot/elf_boot.h>
-#include <boot/coreboot_tables.h>
-#include <ip_checksum.h>
-#include <stream/read_bytes.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* Maximum physical address we can use for the coreboot bounce buffer.
- */
-#ifndef MAX_ADDR
-#define MAX_ADDR -1UL
-#endif
-
-extern unsigned char _ram_seg;
-extern unsigned char _eram_seg;
-
-struct segment {
-	struct segment *next;
-	struct segment *prev;
-	struct segment *phdr_next;
-	struct segment *phdr_prev;
-	unsigned long s_addr;
-	unsigned long s_memsz;
-	unsigned long s_offset;
-	unsigned long s_filesz;
-};
-
-struct verify_callback {
-	struct verify_callback *next;
-	int (*callback)(struct verify_callback *vcb, 
-		Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head);
-	unsigned long desc_offset;
-	unsigned long desc_addr;
-};
-
-struct ip_checksum_vcb {
-	struct verify_callback data;
-	unsigned short ip_checksum;
-};
-
-int verify_ip_checksum(
-	struct verify_callback *vcb, 
-	Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head)
-{
-	struct ip_checksum_vcb *cb;
-	struct segment *ptr;
-	unsigned long bytes;
-	unsigned long checksum;
-	unsigned char buff[2], *n_desc;
-	cb = (struct ip_checksum_vcb *)vcb;
-	/* zero the checksum so it's value won't
-	 * get in the way of verifying the checksum.
-	 */
-	n_desc = 0;
-	if (vcb->desc_addr) {
-		n_desc = (unsigned char *)(vcb->desc_addr);
-		memcpy(buff, n_desc, 2);
-		memset(n_desc, 0, 2);
-	}
-	bytes = 0;
-	checksum = compute_ip_checksum(ehdr, sizeof(*ehdr));
-	bytes += sizeof(*ehdr);
-	checksum = add_ip_checksums(bytes, checksum, 
-		compute_ip_checksum(phdr, ehdr->e_phnum*sizeof(*phdr)));
-	bytes += ehdr->e_phnum*sizeof(*phdr);
-	for(ptr = head->phdr_next; ptr != head; ptr = ptr->phdr_next) {
-		checksum = add_ip_checksums(bytes, checksum,
-			compute_ip_checksum((void *)ptr->s_addr, ptr->s_memsz));
-		bytes += ptr->s_memsz;
-	}
-	if (n_desc != 0) {
-		memcpy(n_desc, buff, 2);
-	}
-	if (checksum != cb->ip_checksum) {
-		printk_err("Image checksum: %04x != computed checksum: %04lx\n",
-			cb->ip_checksum, checksum);
-	}
-	return checksum == cb->ip_checksum;
-}
-
-/* The problem:  
- * Static executables all want to share the same addresses
- * in memory because only a few addresses are reliably present on
- * a machine, and implementing general relocation is hard.
- *
- * The solution:
- * - Allocate a buffer the size of the coreboot image plus additional
- *   required space.
- * - Anything that would overwrite coreboot copy into the lower part of
- *   the buffer. 
- * - After loading an ELF image copy coreboot to the top of the buffer.
- * - Then jump to the loaded image.
- * 
- * Benefits:
- * - Nearly arbitrary standalone executables can be loaded.
- * - Coreboot is preserved, so it can be returned to.
- * - The implementation is still relatively simple,
- *   and much simpler then the general case implemented in kexec.
- * 
- */
-
-static unsigned long bounce_size;
-
-static unsigned long get_bounce_buffer(struct lb_memory *mem)
-{
-	unsigned long lb_size;
-	unsigned long mem_entries;
-	unsigned long buffer;
-	int i;
-	lb_size = (unsigned long)(&_eram_seg - &_ram_seg);
-	/* Double coreboot size so I have somewhere to place a copy to return to */
-	bounce_size = lb_size;
-	lb_size = bounce_size + lb_size;
-	mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]);
-	buffer = 0;
-	for(i = 0; i < mem_entries; i++) {
-		unsigned long mstart, mend;
-		unsigned long msize;
-		unsigned long tbuffer;
-		if (mem->map[i].type != LB_MEM_RAM)
-			continue;
-		if (unpack_lb64(mem->map[i].start) > MAX_ADDR)
-			continue;
-		if (unpack_lb64(mem->map[i].size) < lb_size)
-			continue;
-		mstart = unpack_lb64(mem->map[i].start);
-		msize = MAX_ADDR - mstart +1;
-		if (msize > unpack_lb64(mem->map[i].size))
-			msize = unpack_lb64(mem->map[i].size);
-		mend = mstart + msize;
-		tbuffer = mend - lb_size;
-		if (tbuffer < buffer) 
-			continue;
-		buffer = tbuffer;
-	}
-	return buffer;
-}
-
-
-static struct verify_callback *process_elf_notes(
-	unsigned char *header, 
-	unsigned long offset, unsigned long length)
-{
-	struct verify_callback *cb_chain;
-	unsigned char *note, *end;
-	unsigned char *program, *version;
-
-	cb_chain = 0;
-	note = header + offset;
-	end = note + length;
-	program = version = 0;
-	while(note < end) {
-		Elf_Nhdr *hdr;
-		unsigned char *n_name, *n_desc, *next;
-		hdr = (Elf_Nhdr *)note;
-		n_name = note + sizeof(*hdr);
-		n_desc = n_name + ((hdr->n_namesz + 3) & ~3);
-		next = n_desc + ((hdr->n_descsz + 3) & ~3);
-		if (next > end) {
-			break;
-		}
-		if ((hdr->n_namesz == sizeof(ELF_NOTE_BOOT)) && 
-			(memcmp(n_name, ELF_NOTE_BOOT, sizeof(ELF_NOTE_BOOT)) == 0)) {
-			switch(hdr->n_type) {
-			case EIN_PROGRAM_NAME:
-				if (n_desc[hdr->n_descsz -1] == 0) {
-					program = n_desc;
-				}
-				break;
-			case EIN_PROGRAM_VERSION:
-				if (n_desc[hdr->n_descsz -1] == 0) {
-					version = n_desc;
-				}
-				break;
-			case EIN_PROGRAM_CHECKSUM:
-			{
-				struct ip_checksum_vcb *cb;
-				cb = malloc(sizeof(*cb));
-				cb->ip_checksum = *((uint16_t *)n_desc);
-				cb->data.callback = verify_ip_checksum;
-				cb->data.next = cb_chain;
-				cb->data.desc_offset = n_desc - header;
-				cb_chain = &cb->data;
-				break;
-			}
-			}
-		}
-		printk_spew("n_type: %08x n_name(%d): %-*.*s n_desc(%d): %-*.*s\n", 
-			hdr->n_type,
-			hdr->n_namesz, hdr->n_namesz, hdr->n_namesz, n_name,
-			hdr->n_descsz,hdr->n_descsz, hdr->n_descsz, n_desc);
-		note = next;
-	}
-	if (program && version) {
-		printk_info("Loading %s version: %s\n",
-			program, version);
-	}
-	return cb_chain;
-}
-
-static int valid_area(struct lb_memory *mem, unsigned long buffer,
-	unsigned long start, unsigned long len)
-{
-	/* Check through all of the memory segments and ensure
-	 * the segment that was passed in is completely contained
-	 * in RAM.
-	 */
-	int i;
-	unsigned long end = start + len;
-	unsigned long mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]);
-
-	/* See if I conflict with the bounce buffer */
-	if (end >= buffer) {
-		return 0;
-	}
-
-	/* Walk through the table of valid memory ranges and see if I
-	 * have a match.
-	 */
-	for(i = 0; i < mem_entries; i++) {
-		uint64_t mstart, mend;
-		uint32_t mtype;
-		mtype = mem->map[i].type;
-		mstart = unpack_lb64(mem->map[i].start);
-		mend = mstart + unpack_lb64(mem->map[i].size);
-		if ((mtype == LB_MEM_RAM) && (start < mend) && (end > mstart)) {
-			break;
-		}
-		if ((mtype == LB_MEM_TABLE) && (start < mend) && (end > mstart)) {
-			printk_err("Payload is overwriting Coreboot tables.\n");
-			break;
-		}
-	}
-	if (i == mem_entries) {
-		printk_err("No matching ram area found for range:\n");
-		printk_err("  [0x%016lx, 0x%016lx)\n", start, end);
-		printk_err("Ram areas\n");
-		for(i = 0; i < mem_entries; i++) {
-			uint64_t mstart, mend;
-			uint32_t mtype;
-			mtype = mem->map[i].type;
-			mstart = unpack_lb64(mem->map[i].start);
-			mend = mstart + unpack_lb64(mem->map[i].size);
-			printk_err("  [0x%016lx, 0x%016lx) %s\n",
-				(unsigned long)mstart, 
-				(unsigned long)mend, 
-				(mtype == LB_MEM_RAM)?"RAM":"Reserved");
-			
-		}
-		return 0;
-	}
-	return 1;
-}
-
-static void relocate_segment(unsigned long buffer, struct segment *seg)
-{
-	/* Modify all segments that want to load onto coreboot
-	 * to load onto the bounce buffer instead.
-	 */
-	unsigned long lb_start = (unsigned long)&_ram_seg;
-	unsigned long lb_end = (unsigned long)&_eram_seg;
-	unsigned long start, middle, end;
-
-	printk_spew("lb: [0x%016lx, 0x%016lx)\n", 
-		lb_start, lb_end);
-
-	start = seg->s_addr;
-	middle = start + seg->s_filesz;
-	end = start + seg->s_memsz;
-	/* I don't conflict with coreboot so get out of here */
-	if ((end <= lb_start) || (start >= lb_end))
-		return;
-
-	printk_spew("segment: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-		start, middle, end);
-
-	/* Slice off a piece at the beginning
-	 * that doesn't conflict with coreboot.
-	 */
-	if (start < lb_start) {
-		struct segment *new;
-		unsigned long len = lb_start - start;
-		new = malloc(sizeof(*new));
-		*new = *seg;
-		new->s_memsz = len;
-		seg->s_memsz -= len;
-		seg->s_addr += len;
-		seg->s_offset += len;
-		if (seg->s_filesz > len) {
-			new->s_filesz = len;
-			seg->s_filesz -= len;
-		} else {
-			seg->s_filesz = 0;
-		}
-
-		/* Order by stream offset */
-		new->next = seg;
-		new->prev = seg->prev;
-		seg->prev->next = new;
-		seg->prev = new;
-		/* Order by original program header order */
-		new->phdr_next = seg;
-		new->phdr_prev = seg->phdr_prev;
-		seg->phdr_prev->phdr_next = new;
-		seg->phdr_prev = new;
-
-		/* compute the new value of start */
-		start = seg->s_addr;
-		
-		printk_spew("   early: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-			new->s_addr, 
-			new->s_addr + new->s_filesz,
-			new->s_addr + new->s_memsz);
-	}
-	
-	/* Slice off a piece at the end 
-	 * that doesn't conflict with coreboot 
-	 */
-	if (end > lb_end) {
-		unsigned long len = lb_end - start;
-		struct segment *new;
-		new = malloc(sizeof(*new));
-		*new = *seg;
-		seg->s_memsz = len;
-		new->s_memsz -= len;
-		new->s_addr += len;
-		new->s_offset += len;
-		if (seg->s_filesz > len) {
-			seg->s_filesz = len;
-			new->s_filesz -= len;
-		} else {
-			new->s_filesz = 0;
-		}
-		/* Order by stream offset */
-		new->next = seg->next;
-		new->prev = seg;
-		seg->next->prev = new;
-		seg->next = new;
-		/* Order by original program header order */
-		new->phdr_next = seg->phdr_next;
-		new->phdr_prev = seg;
-		seg->phdr_next->phdr_prev = new;
-		seg->phdr_next = new;
-
-		printk_spew("   late: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-			new->s_addr, 
-			new->s_addr + new->s_filesz,
-			new->s_addr + new->s_memsz);
-		
-	}
-	/* Now retarget this segment onto the bounce buffer */
-	seg->s_addr = buffer + (seg->s_addr - lb_start);
-
-	printk_spew(" bounce: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-		seg->s_addr, 
-		seg->s_addr + seg->s_filesz, 
-		seg->s_addr + seg->s_memsz);
-}
-
-
-static int build_elf_segment_list(
-	struct segment *head, 
-	unsigned long bounce_buffer, struct lb_memory *mem,
-	Elf_phdr *phdr, int headers)
-{
-	struct segment *ptr;
-	int i;
-	memset(head, 0, sizeof(*head));
-	head->phdr_next = head->phdr_prev = head;
-	head->next = head->prev = head;
-	for(i = 0; i < headers; i++) {
-		struct segment *new;
-		/* Ignore data that I don't need to handle */
-		if (phdr[i].p_type != PT_LOAD) {
-			printk_debug("Dropping non PT_LOAD segment\n");
-			continue;
-		}
-		if (phdr[i].p_memsz == 0) {
-			printk_debug("Dropping empty segment\n");
-			continue;
-		}
-		new = malloc(sizeof(*new));
-		new->s_addr = phdr[i].p_paddr;
-		new->s_memsz = phdr[i].p_memsz;
-		new->s_offset = phdr[i].p_offset;
-		new->s_filesz = phdr[i].p_filesz;
-		printk_debug("New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n",
-			new->s_addr, new->s_memsz, new->s_offset, new->s_filesz);
-		/* Clean up the values */
-		if (new->s_filesz > new->s_memsz)  {
-			new->s_filesz = new->s_memsz;
-		}
-		printk_debug("(cleaned up) New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n",
-			new->s_addr, new->s_memsz, new->s_offset, new->s_filesz);
-		for(ptr = head->next; ptr != head; ptr = ptr->next) {
-			if (new->s_offset < ptr->s_offset)
-				break;
-		}
-		/* Order by stream offset */
-		new->next = ptr;
-		new->prev = ptr->prev;
-		ptr->prev->next = new;
-		ptr->prev = new;
-		/* Order by original program header order */
-		new->phdr_next = head;
-		new->phdr_prev = head->phdr_prev;
-		head->phdr_prev->phdr_next  = new;
-		head->phdr_prev = new;
-
-		/* Verify the memory addresses in the segment are valid */
-		if (!valid_area(mem, bounce_buffer, new->s_addr, new->s_memsz)) 
-			goto out;
-
-		/* Modify the segment to load onto the bounce_buffer if necessary.
-		 */
-		relocate_segment(bounce_buffer, new);
-	}
-	return 1;
- out:
-	return 0;
-}
-
-static int load_elf_segments(
-	struct segment *head, unsigned char *header, unsigned long header_size)
-{
-	unsigned long offset;
-	struct segment *ptr;
-	
-	offset = 0;
-	for(ptr = head->next; ptr != head; ptr = ptr->next) {
-		unsigned long start_offset;
-		unsigned long skip_bytes, read_bytes;
-		unsigned char *dest, *middle, *end;
-		byte_offset_t result;
-		printk_debug("Loading Segment: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n",
-			ptr->s_addr, ptr->s_memsz, ptr->s_filesz);
-		
-		/* Compute the boundaries of the segment */
-		dest = (unsigned char *)(ptr->s_addr);
-		end = dest + ptr->s_memsz;
-		middle = dest + ptr->s_filesz;
-		start_offset = ptr->s_offset;
-		/* Ignore s_offset if I have a pure bss segment */
-		if (ptr->s_filesz == 0) {
-			start_offset = offset;
-		}
-		
-		printk_spew("[ 0x%016lx, %016lx, 0x%016lx) <- %016lx\n",
-			(unsigned long)dest,
-			(unsigned long)middle,
-			(unsigned long)end,
-			(unsigned long)start_offset);
-		
-		/* Skip intial buffer unused bytes */
-		if (offset < header_size) {
-			if (start_offset < header_size) {
-				offset = start_offset;
-			} else {
-				offset = header_size;
-			}
-		}
-		
-		/* Skip the unused bytes */
-		skip_bytes = start_offset - offset;
-		if (skip_bytes && 
-			((result = stream_skip(skip_bytes)) != skip_bytes)) {
-			printk_err("ERROR: Skip of %ld bytes skipped %ld bytes\n",
-				skip_bytes, result);
-			goto out;
-		}
-		offset = start_offset;
-		
-		/* Copy data from the initial buffer */
-		if (offset < header_size) {
-			size_t len;
-			if ((ptr->s_filesz + start_offset) > header_size) {
-				len = header_size - start_offset;
-			}
-			else {
-				len = ptr->s_filesz;
-			}
-			memcpy(dest, &header[start_offset], len);
-			dest += len;
-		}
-		
-		/* Read the segment into memory */
-		read_bytes = middle - dest;
-		if (read_bytes && 
-			((result = stream_read(dest, read_bytes)) != read_bytes)) {
-			printk_err("ERROR: Read of %ld bytes read %ld bytes...\n",
-				read_bytes, result);
-			goto out;
-		}
-		offset += ptr->s_filesz;
-		
-		/* Zero the extra bytes between middle & end */
-		if (middle < end) {
-			printk_debug("Clearing Segment: addr: 0x%016lx memsz: 0x%016lx\n",
-				(unsigned long)middle, (unsigned long)(end - middle));
-			
-			/* Zero the extra bytes */
-			memset(middle, 0, end - middle);
-		}
-	}
-	return 1;
- out:
-	return 0;
-}
-
-static int verify_loaded_image(
-	struct verify_callback *vcb,
-	Elf_ehdr *ehdr, Elf_phdr *phdr,
-	struct segment *head
-	)
-{
-	struct segment *ptr;
-	int ok;
-	ok = 1;
-	for(; ok && vcb ; vcb = vcb->next) {
-		/* Find where the note is loaded */
-		/* The whole note must be loaded intact
-		 * so an address of 0 for the descriptor is impossible
-		 */
-		vcb->desc_addr = 0; 
-		for(ptr = head->next; ptr != head; ptr = ptr->next) {
-			unsigned long desc_addr;
-			desc_addr = ptr->s_addr + vcb->desc_offset - ptr->s_offset;
-			if ((desc_addr >= ptr->s_addr) &&
-				(desc_addr < (ptr->s_addr + ptr->s_filesz))) {
-				vcb->desc_addr = desc_addr;
-			}
-		}
-		ok = vcb->callback(vcb, ehdr, phdr, head);
-	}
-	return ok;
-}
-
-int elfload(struct lb_memory *mem,
-	unsigned char *header, unsigned long header_size)
-{
-	Elf_ehdr *ehdr;
-	Elf_phdr *phdr;
-	void *entry;
-	struct segment head;
-	struct verify_callback *cb_chain;
-	unsigned long bounce_buffer;
-
-	/* Find a bounce buffer so I can load to coreboot's current location */
-	bounce_buffer = get_bounce_buffer(mem);
-	if (!bounce_buffer) {
-		printk_err("Could not find a bounce buffer...\n");
-		goto out;
-	}
-
-	ehdr = (Elf_ehdr *)header;
-	entry = (void *)(ehdr->e_entry);
-	phdr = (Elf_phdr *)(&header[ehdr->e_phoff]);
-
-	/* Digest elf note information... */
-	cb_chain = 0;
-	if ((phdr[0].p_type == PT_NOTE) && 
-		((phdr[0].p_offset + phdr[0].p_filesz) < header_size)) {
-		cb_chain = process_elf_notes(header,
-			phdr[0].p_offset, phdr[0].p_filesz);
-	}
-
-	/* Preprocess the elf segments */
-	if (!build_elf_segment_list(&head, 
-		bounce_buffer, mem, phdr, ehdr->e_phnum))
-		goto out;
-
-	/* Load the segments */
-	if (!load_elf_segments(&head, header, header_size))
-		goto out;
-
-	printk_spew("Loaded segments\n");
-	/* Verify the loaded image */
-	if (!verify_loaded_image(cb_chain, ehdr, phdr, &head)) 
-		goto out;
-
-	printk_spew("verified segments\n");
-	/* Shutdown the stream device */
-	stream_fini();
-	
-	printk_spew("closed down stream\n");
-	/* Reset to booting from this image as late as possible */
-	boot_successful();
-
-	printk_debug("Jumping to boot code at %p\n", entry);
-	post_code(0xfe);
-
-	/* Jump to kernel */
-	jmp_to_elf_entry(entry, bounce_buffer, bounce_size);
-	return 1;
-
- out:
-	return 0;
-}
-
-int elfboot(struct lb_memory *mem)
-{
-	Elf_ehdr *ehdr;
-	static unsigned char header[ELF_HEAD_SIZE];
-	int header_offset;
-	int i, result;
-
-	result = 0;
-	printk_debug("\nelfboot: Attempting to load payload.\n");
-	post_code(0xf8);
-
-	if (stream_init() < 0) {
-		printk_err("Could not initialize driver...\n");
-		goto out;
-	}
-
-	/* Read in the initial ELF_HEAD_SIZE bytes */
-	if (stream_read(header, ELF_HEAD_SIZE) != ELF_HEAD_SIZE) {
-		printk_err("Read failed...\n");
-		goto out;
-	}
-	/* Scan for an elf header */
-	header_offset = -1;
-	for(i = 0; i < ELF_HEAD_SIZE - (sizeof(Elf_ehdr) + sizeof(Elf_phdr)); i+=16) {
-		ehdr = (Elf_ehdr *)(&header[i]);
-		if (memcmp(ehdr->e_ident, ELFMAG, 4) != 0) {
-			printk_debug("No header at %d\n", i);
-			continue;
-		}
-		printk_debug("Found ELF candidate at offset %d\n", i);
-		/* Sanity check the elf header */
-		if ((ehdr->e_type == ET_EXEC) &&
-			elf_check_arch(ehdr) &&
-			(ehdr->e_ident[EI_VERSION] == EV_CURRENT) &&
-			(ehdr->e_version == EV_CURRENT) &&
-			(ehdr->e_ehsize == sizeof(Elf_ehdr)) &&
-			(ehdr->e_phentsize = sizeof(Elf_phdr)) &&
-			(ehdr->e_phoff < (ELF_HEAD_SIZE - i)) &&
-			((ehdr->e_phoff + (ehdr->e_phentsize * ehdr->e_phnum)) <= 
-				(ELF_HEAD_SIZE - i))) {
-			header_offset = i;
-			break;
-		}
-		ehdr = 0;
-	}
-	printk_debug("header_offset is %d\n", header_offset);
-	if (header_offset == -1) {
-		goto out;
-	}
-
-	printk_debug("Try to load at offset 0x%x\n", header_offset);
-	result = elfload(mem, 
-		header + header_offset , ELF_HEAD_SIZE - header_offset);
- out:
-	if (!result) {
-		/* Shutdown the stream device */
-		stream_fini();
-
-		printk_err("Can not load ELF Image.\n");
-
-		post_code(0xff);
-	}
-	return 0;
-
-}
diff --git a/src/boot/filo.c b/src/boot/filo.c
deleted file mode 100644
index d6ee930..0000000
--- a/src/boot/filo.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright (C) 2003 by SONE Takeshi <ts1@tsn.or.jp> and others.
- * This program is licensed under the terms of GNU General Public License.
- *
- * Modified for coreboot by Greg Watson <gwatson@lanl.gov>
- */
-
-#include <console/console.h>
-#include <delay.h>
-#include <string.h>
-#include <boot/tables.h>
-#include <boot/elf.h>
-
-#define ENTER '\r'
-#define ESCAPE '\x1b'
-
-#ifndef CONFIG_AUTOBOOT_CMDLINE
-#define autoboot(mem)
-#endif
-
-#if !CONFIG_AUTOBOOT_DELAY
-#define autoboot_delay() 0 /* success */
-#endif
-
-#define havechar() console_tst_byte()
-#define putchar(c) console_tx_byte(c)
-#define getchar(c) console_rx_byte(c)
-
-extern char *boot_file;
-
-int getline(char *buf, int max)
-{
-    int cur, ch, nonspace_seen;
-
-    cur = 0;
-    while (buf[cur]) {
-	putchar(buf[cur]);
-	cur++;
-    }
-    for (;;) {
-	ch = getchar();
-	switch (ch) {
-	/* end of line */
-	case '\r':
-	case '\n':
-	    putchar('\n');
-	    goto out;
-	/* backspace */
-	case '\b':
-	case '\x7f':
-	    if (cur > 0) {
-		cur--;
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-	    }
-	    break;
-	/* word erase */
-	case 'W' & 0x1f: /* ^W */
-	    nonspace_seen = 0;
-	    while (cur) {
-		if (buf[cur-1] != ' ')
-		    nonspace_seen = 1;
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-		cur--;
-		if (nonspace_seen && cur < max-1 && cur > 0 && buf[cur-1]==' ')
-		    break;
-	    }
-	    break;
-	/* line erase */
-	case 'U' & 0x1f: /* ^U */
-	    while (cur) {
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-		cur--;
-	    }
-	    cur = 0;
-	    break;
-	default:
-	    if (ch < 0x20)
-		break; /* ignore control char */
-	    if (ch >= 0x7f)
-		break;
-	    if (cur + 1 < max) {
-		putchar(ch); /* echo back */
-		buf[cur] = ch;
-		cur++;
-	    }
-	}
-    }
-out:
-    if (cur >= max)
-	cur = max - 1;
-    buf[cur] = '\0';
-    return cur;
-}
-
-static void boot(struct lb_memory *mem, const char *line)
-{
-    char *param;
-
-    /* Split filename and parameter */
-    boot_file = strdup(line);
-    param = strchr(boot_file, ' ');
-    if (param) {
-	*param = '\0';
-	param++;
-    }
-
-    if (!elfboot(mem))
-	printk_info("Unsupported image format\n");
-    free(boot_file);
-}
-
-#ifdef CONFIG_AUTOBOOT_CMDLINE
-#if CONFIG_AUTOBOOT_DELAY
-static inline int autoboot_delay(void)
-{
-    unsigned int timeout;
-    int sec, tmp;
-    char key;
-    
-    key = 0;
-
-    printk_info("Press <Enter> for default boot, or <Esc> for boot prompt... ");
-    for (sec = CONFIG_AUTOBOOT_DELAY; sec>0 && key==0; sec--) {
-	printk_info("%d", sec);
-	timeout = 10;
-	while (timeout-- > 0) {
-	    if (havechar()) {
-		key = getchar();
-		if (key==ENTER || key==ESCAPE)
-		    break;
-	    }
-	    mdelay(100);
-	}
-	for (tmp = sec; tmp; tmp /= 10)
-	    printk_info("\b \b");
-    }
-    if (key == 0) {
-	printk_info("timed out\n");
-	return 0; /* success */
-    } else {
-	putchar('\n');
-	if (key == ESCAPE)
-	    return -1; /* canceled */
-	else
-	    return 0; /* default accepted */
-    }
-}
-#endif /* CONFIG_AUTOBOOT_DELAY */
-
-static void autoboot(struct lb_memory *mem)
-{
-    /* If Escape key is pressed already, skip autoboot */
-    if (havechar() && getchar()==ESCAPE)
-	return;
-
-    if (autoboot_delay()==0) {
-	printk_info("boot: %s\n", CONFIG_AUTOBOOT_CMDLINE);
-	boot(mem, CONFIG_AUTOBOOT_CMDLINE);
-    }
-}
-#endif /* CONFIG_AUTOBOOT_CMDLINE */
-
-/* The main routine */
-int filo(struct lb_memory *mem)
-{
-    char line[256];
-
-    printk_info("FILO version 0.4.1\n");
-
-    /* Try default image */
-    autoboot(mem);
-
-    /* The above didn't work, ask user */
-    while (havechar())
-	getchar();
-#ifdef CONFIG_AUTOBOOT_CMDLINE
-    strncpy(line, CONFIG_AUTOBOOT_CMDLINE, sizeof(line)-1);
-    line[sizeof(line)-1] = '\0';
-#else
-    line[0] = '\0';
-#endif
-    for (;;) {
-	printk_info("boot: ");
-	getline(line, sizeof line);
-	if (line[0])
-	    boot(mem, line);
-    }
-}
diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index a054340..5ab14fb 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -96,21 +96,10 @@
 	 * write our configuration tables.
 	 */
 	lb_mem = write_tables();
-#if CONFIG_CBFS == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_load_payload(lb_mem, "fallback/payload");
-# else
+#else
 	cbfs_load_payload(lb_mem, "normal/payload");
-# endif
-#else
-
-#if CONFIG_FS_PAYLOAD == 1
-#warning "CONFIG_FS_PAYLOAD is deprecated."
-	filo(lb_mem);
-#else
-#warning "elfboot will soon be deprecated."
-	elfboot(lb_mem);
-#endif
 #endif
 	printk(BIOS_ERR, "Boot failed.\n");
 }
diff --git a/src/config/Config.lb b/src/config/Config.lb
index 061c0b2..8c954d2 100644
--- a/src/config/Config.lb
+++ b/src/config/Config.lb
@@ -215,7 +215,6 @@
 # for now, this is just 'lib', but it may be more later. 
 dir /lib
 dir /console
-dir /stream
 dir /devices
 dir /pc80
 dir /boot
diff --git a/src/config/Options.lb b/src/config/Options.lb
index db1a20f..071362a 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -641,11 +641,6 @@
 	export always
 	comment "Use Multiboot (rather than ELF boot notes) to boot the payload"
 end
-define CONFIG_IDE_PAYLOAD
-	default 0
-	export always
-	comment "Boot from IDE device"
-end
 define CONFIG_ROM_PAYLOAD
 	default 0
 	export always
@@ -672,47 +667,6 @@
 	export always
 	comment "boot image is already compressed" 
 end
-define CONFIG_SERIAL_PAYLOAD
-	default 0
-	export always
-	comment "Download boot image from serial port"
-end
-define CONFIG_FS_PAYLOAD
-	default 0
-	export always
-	comment "Boot from a filesystem"
-end
-define CONFIG_FS_EXT2
-	default 0
-	export always
-	comment "Enable ext2 filesystem support"
-end
-define CONFIG_FS_ISO9660
-	default 0
-	export always
-	comment "Enable ISO9660 filesystem support"
-end
-define CONFIG_FS_FAT
-	default 0
-	export always
-	comment "Enable FAT filesystem support"
-end
-define CONFIG_CBFS
-	default 1
-	export always
-	comment "The new CBFS file system"
-end
-define CONFIG_AUTOBOOT_DELAY
-	default 2
-	export always
-	comment "Delay (in seconds) before autobooting"
-end
-define CONFIG_AUTOBOOT_CMDLINE
-	default "hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200"
-	export always
-	format "\"%s\""
-	comment "Default command line when autobooting"
-end
 
 define CONFIG_USE_WATCHDOG_ON_BOOT
 	default 0
diff --git a/src/config/failovercalculation.lb b/src/config/failovercalculation.lb
index 7626289..e5ec7e1 100644
--- a/src/config/failovercalculation.lb
+++ b/src/config/failovercalculation.lb
@@ -10,13 +10,8 @@
 	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
 	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
     else
-	if CONFIG_CBFS
-		default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
-		default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
-	else
-		default CONFIG_ROM_SECTION_SIZE   = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = 0
-	end
+	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
+	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
     end
 end
 
diff --git a/src/config/nofailovercalculation.lb b/src/config/nofailovercalculation.lb
index 82132f4..f5f8708 100644
--- a/src/config/nofailovercalculation.lb
+++ b/src/config/nofailovercalculation.lb
@@ -6,13 +6,8 @@
 	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
 	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE )
 else
-	if CONFIG_CBFS
-		default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
-		default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE )
-	else
-		default CONFIG_ROM_SECTION_SIZE   = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = 0
-	end
+	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
+	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE )
 end
 
 ##
diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c
index 79cae6b..a391ec5 100644
--- a/src/cpu/amd/car/copy_and_run.c
+++ b/src/cpu/amd/car/copy_and_run.c
@@ -3,16 +3,15 @@
    2006/05/02 - stepan: move nrv2b to an extra file.
 */
 
-#if CONFIG_CBFS == 1
 void cbfs_and_run_core(const char*, unsigned ebp);
 
 static void copy_and_run(void)
 {
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_ram", 0);
-# else
+#else
       	cbfs_and_run_core("normal/coreboot_ram", 0);
-# endif
+#endif
 }
 
 #if CONFIG_AP_CODE_IN_CAR == 1
@@ -26,38 +25,3 @@
 # endif
 }
 #endif
-
-#else
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp);
-
-extern u8 _liseg, _iseg, _eiseg;
-
-static void copy_and_run(void)
-{
-	uint8_t *src, *dst; 
-        unsigned long ilen;
-
-	src = &_liseg;
-	dst = &_iseg;
-	ilen = &_eiseg - dst;
-
-	copy_and_run_core(src, dst, ilen, 0);
-}
-
-#if CONFIG_AP_CODE_IN_CAR == 1
-
-extern u8 _liseg_apc, _iseg_apc, _eiseg_apc;
-
-static void copy_and_run_ap_code_in_car(unsigned ret_addr)
-{
-        uint8_t *src, *dst;
-        unsigned long ilen;
-
-	src = &_liseg_apc;
-	dst = &_iseg_apc;
-	ilen = &_eiseg_apc - dst;
-
-	copy_and_run_core(src, dst, ilen, ret_addr);
-}
-#endif
-#endif
diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc
index fcd7bdc..ee4902a 100644
--- a/src/cpu/amd/model_lx/cache_as_ram.inc
+++ b/src/cpu/amd/model_lx/cache_as_ram.inc
@@ -222,19 +222,8 @@
 	movl	$0x4000000, %esp
 	movl	%esp, %ebp
 	pushl	%esi
-#if CONFIG_CBFS == 1
 	pushl $str_coreboot_ram_name
 	call cbfs_and_run_core
-#else
-	movl	$_liseg, %esi
-	movl	$_iseg,  %edi
-	movl	$_eiseg, %ecx
-	subl	%edi, %ecx
-	pushl	%ecx
-	pushl	%edi
-	pushl	%esi
-	call copy_and_run_core
-#endif
 
 .Lhlt:
 	intel_chip_post_macro(0xee)	/* post fail ee */
@@ -295,10 +284,8 @@
 .previous
 
 #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */
-#if CONFIG_CBFS == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 str_coreboot_ram_name:	.string "fallback/coreboot_ram"
-# else
+#else
 str_coreboot_ram_name:	.string "normal/coreboot_ram"
-# endif
 #endif
diff --git a/src/cpu/x86/car/copy_and_run.c b/src/cpu/x86/car/copy_and_run.c
index 7ff63c5..7257c4f 100644
--- a/src/cpu/x86/car/copy_and_run.c
+++ b/src/cpu/x86/car/copy_and_run.c
@@ -2,7 +2,6 @@
    (Written by Patrick Georgi <patrick.georgi@coresystems.de> for coresystems GmbH
 */
 
-#if CONFIG_CBFS == 1
 void cbfs_and_run_core(char*, unsigned ebp);
 
 static void copy_and_run(unsigned cpu_reset)
@@ -10,32 +9,9 @@
 	if (cpu_reset == 1) cpu_reset = -1;
 	else cpu_reset = 0;
 
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_ram", cpu_reset);
-# else
-	cbfs_and_run_core("normal/coreboot_ram", cpu_reset);
-# endif
-}
-
 #else
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp);
-
-extern u8 _liseg, _iseg, _eiseg;
-
-static void copy_and_run(unsigned cpu_reset)
-{
-	uint8_t *src, *dst; 
-        unsigned long ilen;
-
-
-	src = &_liseg;
-	dst = &_iseg;
-	ilen = &_eiseg - dst;
-
-	if (cpu_reset == 1) cpu_reset = -1;
-	else cpu_reset = 0;
-
-	copy_and_run_core(src, dst, ilen, cpu_reset);
-}
+	cbfs_and_run_core("normal/coreboot_ram", cpu_reset);
 #endif
-
+}
diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c
index f188bc7..f64a9e8 100644
--- a/src/devices/pci_rom.c
+++ b/src/devices/pci_rom.c
@@ -35,22 +35,17 @@
 	struct rom_header *rom_header;
 	struct pci_data *rom_data;
 
-	if (CONFIG_CBFS) {
-		void *v;
-		/* if it's in FLASH, then it's as if dev->on_mainboard was true */
-		v = cbfs_load_optionrom(dev->vendor, dev->device, NULL);
-		printk_debug("In cbfs, rom address for %s = %p\n", 
-				dev_path(dev), v);
-		if (v) {
-			dev->rom_address = (u32)v;
-			dev->on_mainboard = 1;
-		}
-	} 
+	void *v;
+	/* if it's in FLASH, then it's as if dev->on_mainboard was true */
+	v = cbfs_load_optionrom(dev->vendor, dev->device, NULL);
+	printk_debug("In cbfs, rom address for %s = %p\n", 
+			dev_path(dev), v);
+	if (v) {
+		dev->rom_address = (u32)v;
+		dev->on_mainboard = 1;
+	}
 
 	if (dev->on_mainboard) {
-		/* this is here as a legacy path. We hope it goes away soon. Users should not have to 
-		 * compute the ROM address at build time!
-		 */
                 // in case some device PCI_ROM_ADDRESS can not be set or readonly 
 		rom_address = dev->rom_address;
 		printk_debug("On mainboard, rom address for %s = %lx\n", 
diff --git a/src/lib/Config.lb b/src/lib/Config.lb
index 7569d85..7f9a5b5 100644
--- a/src/lib/Config.lb
+++ b/src/lib/Config.lb
@@ -27,11 +27,5 @@
 initobject memcpy.o
 initobject memcmp.o
 
-if CONFIG_CBFS
-	object cbfs.o
-	object lzma.o
-end
-
-if CONFIG_COMPRESSED_PAYLOAD_LZMA
-	object lzma.o
-end
+object cbfs.o
+object lzma.o
diff --git a/src/mainboard/a-trend/atc-6220/Options.lb b/src/mainboard/a-trend/atc-6220/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/a-trend/atc-6220/Options.lb
+++ b/src/mainboard/a-trend/atc-6220/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/a-trend/atc-6240/Options.lb b/src/mainboard/a-trend/atc-6240/Options.lb
index 82d2d443..89aa4ba 100644
--- a/src/mainboard/a-trend/atc-6240/Options.lb
+++ b/src/mainboard/a-trend/atc-6240/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/abit/be6-ii_v2_0/Options.lb b/src/mainboard/abit/be6-ii_v2_0/Options.lb
index 9e9c5ff..53dad27 100644
--- a/src/mainboard/abit/be6-ii_v2_0/Options.lb
+++ b/src/mainboard/abit/be6-ii_v2_0/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -98,9 +97,4 @@
 default CONFIG_CONSOLE_VGA = 1		# Override this in targets/*/Config.lb.
 default CONFIG_PCI_ROM_RUN = 1		# Override this in targets/*/Config.lb.
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/advantech/pcm-5820/Options.lb b/src/mainboard/advantech/pcm-5820/Options.lb
index ac76175..98601c1 100644
--- a/src/mainboard/advantech/pcm-5820/Options.lb
+++ b/src/mainboard/advantech/pcm-5820/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb
index 1be6893..303f6d2 100644
--- a/src/mainboard/amd/db800/Options.lb
+++ b/src/mainboard/amd/db800/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb
index 707ed6c..c94590a 100644
--- a/src/mainboard/amd/dbm690t/Options.lb
+++ b/src/mainboard/amd/dbm690t/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -301,9 +300,4 @@
 default CONFIG_HAVE_MAINBOARD_RESOURCES=1
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/norwich/Options.lb b/src/mainboard/amd/norwich/Options.lb
index 1c6da2c..9315d45 100644
--- a/src/mainboard/amd/norwich/Options.lb
+++ b/src/mainboard/amd/norwich/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/pistachio/Options.lb b/src/mainboard/amd/pistachio/Options.lb
index 88205e0..6ac38aa 100644
--- a/src/mainboard/amd/pistachio/Options.lb
+++ b/src/mainboard/amd/pistachio/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -299,9 +298,4 @@
 default CONFIG_HAVE_MAINBOARD_RESOURCES=1
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb
index e8a6e10..d2eb28e 100644
--- a/src/mainboard/amd/rumba/Options.lb
+++ b/src/mainboard/amd/rumba/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -159,10 +158,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb
index 6b53360..fcab077f 100644
--- a/src/mainboard/amd/serengeti_cheetah/Options.lb
+++ b/src/mainboard/amd/serengeti_cheetah/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -325,9 +324,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
index f8079a5..977e67e 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
@@ -18,7 +18,6 @@
 #
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -362,9 +361,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb
index 1e8b436..ce19152 100644
--- a/src/mainboard/arima/hdama/Options.lb
+++ b/src/mainboard/arima/hdama/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -242,9 +241,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb
index 94fa6b6..51916fb 100644
--- a/src/mainboard/artecgroup/dbe61/Options.lb
+++ b/src/mainboard/artecgroup/dbe61/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asi/mb_5blgp/Options.lb b/src/mainboard/asi/mb_5blgp/Options.lb
index 20785e8..f9a7bcc 100644
--- a/src/mainboard/asi/mb_5blgp/Options.lb
+++ b/src/mainboard/asi/mb_5blgp/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb
index a3aa658..7e5a96e 100644
--- a/src/mainboard/asi/mb_5blmp/Options.lb
+++ b/src/mainboard/asi/mb_5blmp/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_CBFS
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
 uses CONFIG_HAVE_HARD_RESET
@@ -161,10 +160,4 @@
 # default CONFIG_PCI_ROM_RUN=1
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb
index d83e938..dc8ca11 100644
--- a/src/mainboard/asus/a8n_e/Options.lb
+++ b/src/mainboard/asus/a8n_e/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -167,9 +166,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb
index 15648cb..6b48bec 100644
--- a/src/mainboard/asus/a8v-e_se/Options.lb
+++ b/src/mainboard/asus/a8v-e_se/Options.lb
@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -167,9 +166,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb
index 1a9fa17..bf65a41 100644
--- a/src/mainboard/asus/m2v-mx_se/Options.lb
+++ b/src/mainboard/asus/m2v-mx_se/Options.lb
@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -176,9 +175,4 @@
 
 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
 default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb
index 6ccdc4c..0799ee6 100644
--- a/src/mainboard/asus/mew-am/Options.lb
+++ b/src/mainboard/asus/mew-am/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1		# Override this in targets/*/Config.lb.
 default CONFIG_PCI_ROM_RUN = 1		# Override this in targets/*/Config.lb.
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb
index 0883ce3..7879a2e 100644
--- a/src/mainboard/asus/mew-vm/Options.lb
+++ b/src/mainboard/asus/mew-vm/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -158,9 +157,4 @@
 
 default CONFIG_UDELAY_TSC=1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/p2b-d/Options.lb b/src/mainboard/asus/p2b-d/Options.lb
index 25891fa..fa06475 100644
--- a/src/mainboard/asus/p2b-d/Options.lb
+++ b/src/mainboard/asus/p2b-d/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,5 +102,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/p2b-ds/Options.lb b/src/mainboard/asus/p2b-ds/Options.lb
index a48b3a4..07f4c29 100644
--- a/src/mainboard/asus/p2b-ds/Options.lb
+++ b/src/mainboard/asus/p2b-ds/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -104,9 +103,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/asus/p2b-f/Options.lb
+++ b/src/mainboard/asus/p2b-f/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb
index aecae91..afee671 100644
--- a/src/mainboard/asus/p2b/Options.lb
+++ b/src/mainboard/asus/p2b/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -98,9 +97,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/asus/p3b-f/Options.lb
+++ b/src/mainboard/asus/p3b-f/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb
index b8e1a0f..53902938 100644
--- a/src/mainboard/axus/tc320/Options.lb
+++ b/src/mainboard/axus/tc320/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/azza/pt-6ibd/Options.lb b/src/mainboard/azza/pt-6ibd/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/azza/pt-6ibd/Options.lb
+++ b/src/mainboard/azza/pt-6ibd/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb
index 853e4c0..b5ef1c7 100644
--- a/src/mainboard/bcom/winnet100/Options.lb
+++ b/src/mainboard/bcom/winnet100/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/bcom/winnetp680/Options.lb b/src/mainboard/bcom/winnetp680/Options.lb
index 212c18f..4d058e2 100644
--- a/src/mainboard/bcom/winnetp680/Options.lb
+++ b/src/mainboard/bcom/winnetp680/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,10 +102,4 @@
 ##
 default CONFIG_MAX_PCI_BUSES = 3
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/biostar/m6tba/Options.lb b/src/mainboard/biostar/m6tba/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/biostar/m6tba/Options.lb
+++ b/src/mainboard/biostar/m6tba/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb
index ca6738d..4ae8176 100644
--- a/src/mainboard/broadcom/blast/Options.lb
+++ b/src/mainboard/broadcom/blast/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -260,9 +259,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb
+++ b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb
index 4900941..1e93026 100644
--- a/src/mainboard/dell/s1850/Options.lb
+++ b/src/mainboard/dell/s1850/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb
index 0ece7eb..7fc51bc 100644
--- a/src/mainboard/digitallogic/adl855pc/Options.lb
+++ b/src/mainboard/digitallogic/adl855pc/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -113,11 +112,4 @@
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb
index 5f85c3a..fe1ed83 100644
--- a/src/mainboard/digitallogic/msm586seg/Options.lb
+++ b/src/mainboard/digitallogic/msm586seg/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -121,11 +120,4 @@
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c
index 7bd8ac0..d9d3b14 100644
--- a/src/mainboard/digitallogic/msm586seg/mainboard.c
+++ b/src/mainboard/digitallogic/msm586seg/mainboard.c
@@ -35,9 +35,6 @@
    - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
 */
 static void enable_dev(struct device *dev) {
-#if !CONFIG_CBFS
-	extern unsigned char *rom_start, *rom_end;
-#endif
 	volatile struct mmcrpic *pic = MMCRPIC;
 	volatile struct mmcr *mmcr = MMCRDEFAULT;
 
@@ -135,15 +132,6 @@
 	 */
 	/* follow fuctory here */
 	mmcr->dmacontrol.extchanmapa = 0x3210;
-
-#if !CONFIG_CBFS
-	/* hack for IDIOTIC need to fix rom_start */
-	printk_err("Patching rom_start due to sc520 limits\n");
-	rom_start = 0x2000000 + 0x40000;
-	rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1;
-#endif
-
-	
 }
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("DIGITAL-LOGIC MSM586SEG Mainboard")
diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb
index 3d9f0c7..35f60c6 100644
--- a/src/mainboard/digitallogic/msm800sev/Options.lb
+++ b/src/mainboard/digitallogic/msm800sev/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb
index f867e9d..f42634f 100644
--- a/src/mainboard/eaglelion/5bcm/Options.lb
+++ b/src/mainboard/eaglelion/5bcm/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -164,10 +163,4 @@
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/emulation/qemu-x86/Options.lb b/src/mainboard/emulation/qemu-x86/Options.lb
index bf416a2..5200c08 100644
--- a/src/mainboard/emulation/qemu-x86/Options.lb
+++ b/src/mainboard/emulation/qemu-x86/Options.lb
@@ -48,13 +48,11 @@
 
 uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
 uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CBFS
 
 
 default CONFIG_CONSOLE_SERIAL8250=1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-default CONFIG_CBFS=1
 
 ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 default CONFIG_ROM_SIZE  = 256*1024
diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb
index 713d3bc..ac9d17f 100644
--- a/src/mainboard/gigabyte/ga-6bxc/Options.lb
+++ b/src/mainboard/gigabyte/ga-6bxc/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
index ed45cf6..6c6554d 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
@@ -22,7 +22,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -351,9 +350,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb
index f0088bb..4df7ff4 100644
--- a/src/mainboard/gigabyte/m57sli/Options.lb
+++ b/src/mainboard/gigabyte/m57sli/Options.lb
@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -359,10 +358,5 @@
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 ### End Options.lb
 end
diff --git a/src/mainboard/hp/dl145_g3/Options.lb b/src/mainboard/hp/dl145_g3/Options.lb
index 8f5222d..f754012 100644
--- a/src/mainboard/hp/dl145_g3/Options.lb
+++ b/src/mainboard/hp/dl145_g3/Options.lb
@@ -84,7 +84,6 @@
 uses CONFIG_HW_MEM_HOLE_SIZEK
 uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
 uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_CBFS
 
 uses CONFIG_HT_CHAIN_UNITID_BASE
 uses CONFIG_HT_CHAIN_END_UNITID_BASE
@@ -327,9 +326,5 @@
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-##
-## CBFS
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end
diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb
index 57cd8970..30e452f 100644
--- a/src/mainboard/ibm/e325/Options.lb
+++ b/src/mainboard/ibm/e325/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -221,9 +220,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb
index b232a10..7a2bcd9 100644
--- a/src/mainboard/ibm/e326/Options.lb
+++ b/src/mainboard/ibm/e326/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -227,9 +226,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb
index 564f66a..0538d5f 100644
--- a/src/mainboard/iei/juki-511p/Options.lb
+++ b/src/mainboard/iei/juki-511p/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -145,10 +144,4 @@
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb
index 00eaba4..88c67e0 100644
--- a/src/mainboard/iei/nova4899r/Options.lb
+++ b/src/mainboard/iei/nova4899r/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -172,10 +171,4 @@
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb
index 051ffd5..c6ca415 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb
+++ b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -106,10 +105,4 @@
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/intel/eagleheights/Options.lb b/src/mainboard/intel/eagleheights/Options.lb
index a37095c..1032c61 100644
--- a/src/mainboard/intel/eagleheights/Options.lb
+++ b/src/mainboard/intel/eagleheights/Options.lb
@@ -70,7 +70,6 @@
 uses CONFIG_PCIE_CONFIGSPACE_HOLE
 uses CONFIG_MMCONF_SUPPORT
 uses CONFIG_MMCONF_BASE_ADDRESS
-uses CONFIG_CBFS
 #
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_PART_NUMBER
@@ -322,10 +321,5 @@
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end
diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb
index aac7a38..fd46975 100644
--- a/src/mainboard/intel/jarrell/Options.lb
+++ b/src/mainboard/intel/jarrell/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -242,9 +241,4 @@
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/intel/mtarvon/Options.lb b/src/mainboard/intel/mtarvon/Options.lb
index c5f2782f..2d1cca1 100644
--- a/src/mainboard/intel/mtarvon/Options.lb
+++ b/src/mainboard/intel/mtarvon/Options.lb
@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -225,9 +224,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/intel/truxton/Options.lb b/src/mainboard/intel/truxton/Options.lb
index 2dd7db5..dd320dc 100644
--- a/src/mainboard/intel/truxton/Options.lb
+++ b/src/mainboard/intel/truxton/Options.lb
@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -236,10 +235,4 @@
 
 ### End Options.lb
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb
index 325edba..aba952b 100644
--- a/src/mainboard/intel/xe7501devkit/Options.lb
+++ b/src/mainboard/intel/xe7501devkit/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_HAVE_PIRQ_TABLE
@@ -240,9 +239,4 @@
 # default CONFIG_CPU_OPT="-g"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb
index d216b43..1973e60 100644
--- a/src/mainboard/iwill/dk8_htx/Options.lb
+++ b/src/mainboard/iwill/dk8_htx/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -326,9 +325,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb
index 248b694..f3560ff 100644
--- a/src/mainboard/iwill/dk8s2/Options.lb
+++ b/src/mainboard/iwill/dk8s2/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb
index 23fdc89..2a1275d 100644
--- a/src/mainboard/iwill/dk8x/Options.lb
+++ b/src/mainboard/iwill/dk8x/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -227,9 +226,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/jetway/j7f24/Options.lb b/src/mainboard/jetway/j7f24/Options.lb
index 296ca32..3a73d23 100644
--- a/src/mainboard/jetway/j7f24/Options.lb
+++ b/src/mainboard/jetway/j7f24/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -104,10 +103,4 @@
 ##
 default CONFIG_MAX_PCI_BUSES = 3
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb
index 25f160c9..5d75737 100644
--- a/src/mainboard/kontron/986lcd-m/Options.lb
+++ b/src/mainboard/kontron/986lcd-m/Options.lb
@@ -71,7 +71,6 @@
 uses CONFIG_MMCONF_SUPPORT
 uses CONFIG_MMCONF_BASE_ADDRESS
 uses CONFIG_GFXUMA
-uses CONFIG_CBFS
 
 #
 uses CONFIG_MAINBOARD
@@ -327,10 +326,5 @@
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-# 
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end
diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb
index e8a6e10..d2eb28e 100644
--- a/src/mainboard/lippert/frontrunner/Options.lb
+++ b/src/mainboard/lippert/frontrunner/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -159,10 +158,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb
index f5f99a2..f0158c5 100644
--- a/src/mainboard/lippert/roadrunner-lx/Options.lb
+++ b/src/mainboard/lippert/roadrunner-lx/Options.lb
@@ -21,7 +21,6 @@
 ## Based on Options.lb from AMD's DB800 mainboard.
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -29,11 +28,6 @@
 uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IDE
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_FS_EXT2
-uses CONFIG_AUTOBOOT_DELAY
-uses CONFIG_AUTOBOOT_CMDLINE
 uses CONFIG_IRQ_SLOT_COUNT
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_VENDOR
@@ -211,9 +205,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/lippert/spacerunner-lx/Options.lb b/src/mainboard/lippert/spacerunner-lx/Options.lb
index f1d25a2..50c979e 100644
--- a/src/mainboard/lippert/spacerunner-lx/Options.lb
+++ b/src/mainboard/lippert/spacerunner-lx/Options.lb
@@ -21,7 +21,6 @@
 ## Based on Options.lb from AMD's DB800 mainboard.
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -29,11 +28,6 @@
 uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IDE
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_FS_EXT2
-uses CONFIG_AUTOBOOT_DELAY
-uses CONFIG_AUTOBOOT_CMDLINE
 uses CONFIG_IRQ_SLOT_COUNT
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_VENDOR
@@ -211,9 +205,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/mitac/6513wu/Options.lb b/src/mainboard/mitac/6513wu/Options.lb
index 9a6ee4b5..8f97a2e 100644
--- a/src/mainboard/mitac/6513wu/Options.lb
+++ b/src/mainboard/mitac/6513wu/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CC
-uses CONFIG_CBFS
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_VGA
@@ -78,7 +77,6 @@
 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
 default CONFIG_HAVE_FALLBACK_BOOT = 1
 default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CBFS=1
 
 # RAM layout
 default CONFIG_RAMBASE = 0x00004000
diff --git a/src/mainboard/msi/ms6119/Options.lb b/src/mainboard/msi/ms6119/Options.lb
index 82d2d443..89aa4ba 100644
--- a/src/mainboard/msi/ms6119/Options.lb
+++ b/src/mainboard/msi/ms6119/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/msi/ms6147/Options.lb b/src/mainboard/msi/ms6147/Options.lb
index 76f8846..1260545 100644
--- a/src/mainboard/msi/ms6147/Options.lb
+++ b/src/mainboard/msi/ms6147/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb
index f07733b..3876018 100644
--- a/src/mainboard/msi/ms6178/Options.lb
+++ b/src/mainboard/msi/ms6178/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,7 +96,6 @@
 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS = 1
 default CONFIG_HAVE_HIGH_TABLES = 1
 default CONFIG_VIDEO_MB = 1
 end
diff --git a/src/mainboard/msi/ms7135/Options.lb b/src/mainboard/msi/ms7135/Options.lb
index 8731625..9bd1b0a 100644
--- a/src/mainboard/msi/ms7135/Options.lb
+++ b/src/mainboard/msi/ms7135/Options.lb
@@ -21,7 +21,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -320,9 +319,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb
index 0dd1e2b..0b76250 100644
--- a/src/mainboard/msi/ms7260/Options.lb
+++ b/src/mainboard/msi/ms7260/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -186,9 +185,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb
index 03c4d3e..5e2b387 100644
--- a/src/mainboard/msi/ms9185/Options.lb
+++ b/src/mainboard/msi/ms9185/Options.lb
@@ -23,7 +23,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -327,9 +326,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb
index d22644f..055361c 100644
--- a/src/mainboard/msi/ms9282/Options.lb
+++ b/src/mainboard/msi/ms9282/Options.lb
@@ -23,7 +23,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -307,9 +306,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/nec/powermate2000/Options.lb b/src/mainboard/nec/powermate2000/Options.lb
index 77562a1..efe7ea4 100644
--- a/src/mainboard/nec/powermate2000/Options.lb
+++ b/src/mainboard/nec/powermate2000/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -96,9 +95,4 @@
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb
index b7bbeff..6e7ee76 100644
--- a/src/mainboard/newisys/khepri/Options.lb
+++ b/src/mainboard/newisys/khepri/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -243,9 +242,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb
index d986782..950126d 100644
--- a/src/mainboard/nvidia/l1_2pvv/Options.lb
+++ b/src/mainboard/nvidia/l1_2pvv/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -349,9 +348,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb
index 1e7335d..23468bd 100644
--- a/src/mainboard/olpc/btest/Options.lb
+++ b/src/mainboard/olpc/btest/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -160,10 +159,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb
index 1e7335d..23468bd 100644
--- a/src/mainboard/olpc/rev_a/Options.lb
+++ b/src/mainboard/olpc/rev_a/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -160,10 +159,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb
index 85350a4..4f5e997 100644
--- a/src/mainboard/pcengines/alix1c/Options.lb
+++ b/src/mainboard/pcengines/alix1c/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -198,10 +197,4 @@
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/rca/rm4100/Options.lb b/src/mainboard/rca/rm4100/Options.lb
index e3c84d5f..f6ac50d 100644
--- a/src/mainboard/rca/rm4100/Options.lb
+++ b/src/mainboard/rca/rm4100/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CC
-uses CONFIG_CBFS
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
@@ -96,9 +95,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAINBOARD_VENDOR = "RCA"
 default CONFIG_MAINBOARD_PART_NUMBER = "RM4100"
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb
index 269d7ae..2e62bef 100644
--- a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb
+++ b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -96,5 +95,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb
index fc73ee0..9acee56 100644
--- a/src/mainboard/sunw/ultra40/Options.lb
+++ b/src/mainboard/sunw/ultra40/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -276,9 +275,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb
index afb7350..42280cf 100644
--- a/src/mainboard/supermicro/h8dme/Options.lb
+++ b/src/mainboard/supermicro/h8dme/Options.lb
@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -351,9 +350,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb
index f862dbd..c93393a 100644
--- a/src/mainboard/supermicro/h8dmr/Options.lb
+++ b/src/mainboard/supermicro/h8dmr/Options.lb
@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -348,11 +347,5 @@
 default CONFIG_USE_FALLBACK_IMAGE=0
 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end
diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb
index 7fc17b7..5556cd3 100644
--- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb
+++ b/src/mainboard/supermicro/h8dmr_fam10/Options.lb
@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -360,12 +359,5 @@
 default CONFIG_USE_FAILOVER_IMAGE=0
 default CONFIG_USE_FALLBACK_IMAGE=0
 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end
diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb
index 2ad1692..35843e6 100644
--- a/src/mainboard/supermicro/x6dai_g/Options.lb
+++ b/src/mainboard/supermicro/x6dai_g/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,10 +227,4 @@
 
 
 ### End Options.lb
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb
index c9ca495..8734f0e 100644
--- a/src/mainboard/supermicro/x6dhe_g/Options.lb
+++ b/src/mainboard/supermicro/x6dhe_g/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,10 +227,4 @@
 
 
 ### End Options.lb
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb
index c9ca495..8734f0e 100644
--- a/src/mainboard/supermicro/x6dhe_g2/Options.lb
+++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,10 +227,4 @@
 
 
 ### End Options.lb
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb
index 717f9df..240b8c5 100644
--- a/src/mainboard/supermicro/x6dhr_ig/Options.lb
+++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb
index 717f9df..240b8c5 100644
--- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb
+++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/technexion/tim8690/Options.lb b/src/mainboard/technexion/tim8690/Options.lb
index fef8a9f..c496ad1 100644
--- a/src/mainboard/technexion/tim8690/Options.lb
+++ b/src/mainboard/technexion/tim8690/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb
index c3f0c6e..d55ea94 100644
--- a/src/mainboard/technologic/ts5300/Options.lb
+++ b/src/mainboard/technologic/ts5300/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -135,10 +134,4 @@
 ##
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c
index 551c3e0..29a08f57 100644
--- a/src/mainboard/technologic/ts5300/mainboard.c
+++ b/src/mainboard/technologic/ts5300/mainboard.c
@@ -35,9 +35,6 @@
    - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
 */
 static void enable_dev(struct device *dev) {
-#if !CONFIG_CBFS
-	extern unsigned char *rom_start, *rom_end;
-#endif
 	volatile struct mmcrpic *pic = MMCRPIC;
 	volatile struct mmcr *mmcr = MMCRDEFAULT;
 
@@ -141,15 +138,7 @@
 	mmcr->dmacontrol.extchanmapa = 0xf210;
 	mmcr->dmacontrol.extchanmapb = 0xffff;
 
-#if !CONFIG_CBFS
-	/* hack for IDIOTIC need to fix rom_start */
-	printk_err("Patching rom_start due to sc520 limits\n");
-	rom_start = 0x09400000 + 0xe0000;
-	rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1;
-#endif
-
 	printk_err("TS5300 EXIT %s\n", __func__);
-	
 }
 
 struct chip_operations mainboard_ops = {
diff --git a/src/mainboard/televideo/tc7020/Options.lb b/src/mainboard/televideo/tc7020/Options.lb
index 3c38d53..988f247 100644
--- a/src/mainboard/televideo/tc7020/Options.lb
+++ b/src/mainboard/televideo/tc7020/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,10 +102,4 @@
 default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/thomson/ip1000/Options.lb b/src/mainboard/thomson/ip1000/Options.lb
index 96ab879..349c7b5 100644
--- a/src/mainboard/thomson/ip1000/Options.lb
+++ b/src/mainboard/thomson/ip1000/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CC
-uses CONFIG_CBFS
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
@@ -96,9 +95,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAINBOARD_VENDOR = "THOMSON"
 default CONFIG_MAINBOARD_PART_NUMBER = "IP1000"
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb
index 3e1990e..31ae004 100644
--- a/src/mainboard/tyan/s1846/Options.lb
+++ b/src/mainboard/tyan/s1846/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,10 +96,4 @@
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb
index 609f266..144a372 100644
--- a/src/mainboard/tyan/s2735/Options.lb
+++ b/src/mainboard/tyan/s2735/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -256,9 +255,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb
index bd4433f..9372378 100644
--- a/src/mainboard/tyan/s2850/Options.lb
+++ b/src/mainboard/tyan/s2850/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -244,9 +243,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb
index 8d0357a..3d56bff 100644
--- a/src/mainboard/tyan/s2875/Options.lb
+++ b/src/mainboard/tyan/s2875/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -245,9 +244,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb
index 9006a44..02596bf 100644
--- a/src/mainboard/tyan/s2880/Options.lb
+++ b/src/mainboard/tyan/s2880/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -244,9 +243,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
index 417e007..52b5d16 100644
--- a/src/mainboard/tyan/s2881/Options.lb
+++ b/src/mainboard/tyan/s2881/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -261,9 +260,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb
index 21bbf00..70193e1 100644
--- a/src/mainboard/tyan/s2882/Options.lb
+++ b/src/mainboard/tyan/s2882/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -244,9 +243,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
index 0b4d9a0..2e14f74 100644
--- a/src/mainboard/tyan/s2885/Options.lb
+++ b/src/mainboard/tyan/s2885/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -271,9 +270,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
index 4b6c226..4be3ce1 100644
--- a/src/mainboard/tyan/s2891/Options.lb
+++ b/src/mainboard/tyan/s2891/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -300,9 +299,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index c80e772..26f512e 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -288,9 +287,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
index 7e4da22..4c23fee 100644
--- a/src/mainboard/tyan/s2895/Options.lb
+++ b/src/mainboard/tyan/s2895/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -307,9 +306,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb
index 640f147..cf9c88a 100644
--- a/src/mainboard/tyan/s2912/Options.lb
+++ b/src/mainboard/tyan/s2912/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -351,9 +350,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb
index 62b6af9..2efb02a 100644
--- a/src/mainboard/tyan/s2912_fam10/Options.lb
+++ b/src/mainboard/tyan/s2912_fam10/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -360,9 +359,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb
index c9fa096..22d462e 100644
--- a/src/mainboard/tyan/s4880/Options.lb
+++ b/src/mainboard/tyan/s4880/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -253,9 +252,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb
index d76d2ec..c41b2e7 100644
--- a/src/mainboard/tyan/s4882/Options.lb
+++ b/src/mainboard/tyan/s4882/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -252,9 +251,4 @@
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb
index 1f2b70a..9e6fa4f 100644
--- a/src/mainboard/via/epia-cn/Options.lb
+++ b/src/mainboard/via/epia-cn/Options.lb
@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,11 +102,4 @@
 ## time when it can't find a device.
 ##
 default CONFIG_MAX_PCI_BUSES = 3
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb
index c019b22..1f6af3f 100644
--- a/src/mainboard/via/epia-m/Options.lb
+++ b/src/mainboard/via/epia-m/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -142,11 +141,4 @@
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default  CONFIG_CONSOLE_SERIAL8250=1
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/epia-m700/Options.lb b/src/mainboard/via/epia-m700/Options.lb
index 7f0477f..aeebe2a 100644
--- a/src/mainboard/via/epia-m700/Options.lb
+++ b/src/mainboard/via/epia-m700/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -137,7 +136,6 @@
 default HOSTCC = "gcc"
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CBFS=1
 
 ##
 ## Set this to the max PCI bus number you would ever use for PCI config I/O.
diff --git a/src/mainboard/via/epia-n/Options.lb b/src/mainboard/via/epia-n/Options.lb
index 21b7518..de6e6f9 100644
--- a/src/mainboard/via/epia-n/Options.lb
+++ b/src/mainboard/via/epia-n/Options.lb
@@ -19,7 +19,6 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_FAILOVER_BOOT
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -120,11 +119,4 @@
 ## time when it can't find a device.
 ##
 default CONFIG_MAX_PCI_BUSES = 3
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb
index 0d20674..a0b6005 100644
--- a/src/mainboard/via/epia/Options.lb
+++ b/src/mainboard/via/epia/Options.lb
@@ -1,5 +1,4 @@
 uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CBFS
 uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_TTYS0_BAUD
@@ -139,12 +138,4 @@
 default CONFIG_CROSS_COMPILE=""
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
-
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/pc2500e/Options.lb b/src/mainboard/via/pc2500e/Options.lb
index ce03e72..d870030 100644
--- a/src/mainboard/via/pc2500e/Options.lb
+++ b/src/mainboard/via/pc2500e/Options.lb
@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_SMP
-uses CONFIG_CBFS
 uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
@@ -111,11 +110,4 @@
 default CONFIG_TTYS0_LCS = 0x3
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end
diff --git a/src/mainboard/via/vt8454c/Options.lb b/src/mainboard/via/vt8454c/Options.lb
index 8f6dbed..d72f419 100644
--- a/src/mainboard/via/vt8454c/Options.lb
+++ b/src/mainboard/via/vt8454c/Options.lb
@@ -55,7 +55,6 @@
 uses CONFIG_RAMBASE
 uses CONFIG_XIP_ROM_SIZE
 uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CBFS
 
 # compiler specifics
 uses CONFIG_CROSS_COMPILE
@@ -242,11 +241,5 @@
 default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
-
-#
-# CBFS
-# 
-default CONFIG_CBFS=1
-
 end
 
diff --git a/src/stream/Config.lb b/src/stream/Config.lb
deleted file mode 100644
index 89f8404..0000000
--- a/src/stream/Config.lb
+++ /dev/null
@@ -1,27 +0,0 @@
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IDE_PAYLOAD
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_IDE
-uses CONFIG_SERIAL_PAYLOAD
-uses CONFIG_CBFS
-
-if CONFIG_CBFS
-else
-if CONFIG_ROM_PAYLOAD
-  object rom_stream.o
-end
-
-if CONFIG_IDE_PAYLOAD
-  default CONFIG_IDE=1
-  object ide_stream.o
-end
-
-if CONFIG_FS_PAYLOAD
-  object fs_stream.o
-  dir fs
-end
-
-if CONFIG_SERIAL_PAYLOAD
-  object serial_stream.o
-end
-end
diff --git a/src/stream/fs/Config.lb b/src/stream/fs/Config.lb
deleted file mode 100644
index 86d81f0..0000000
--- a/src/stream/fs/Config.lb
+++ /dev/null
@@ -1,18 +0,0 @@
-uses CONFIG_FS_EXT2
-uses CONFIG_FS_ISO9660
-uses CONFIG_FS_FAT
-
-object blockdev.o
-object vfs.o
-
-if CONFIG_FS_EXT2
-	object ext2fs.o
-end
-
-if CONFIG_FS_ISO9660
-	object iso9660.o
-end
-
-if CONFIG_FS_FAT
-	object fat.o
-end
diff --git a/src/stream/fs/blockdev.c b/src/stream/fs/blockdev.c
deleted file mode 100644
index aa818dd..0000000
--- a/src/stream/fs/blockdev.c
+++ /dev/null
@@ -1,411 +0,0 @@
-#include <console/console.h>
-#include <fs/fs.h>
-#include <arch/io.h>
-#include <string.h>
-#include <delay.h>
-#include <pc80/ide.h>
-#include <arch/byteorder.h>
-
-#define NUM_CACHE 64
-static unsigned char buf_cache[NUM_CACHE][512];
-static unsigned long cache_sect[NUM_CACHE];
-
-static char dev_name[256];
-
-int dev_type = -1;
-int dev_drive = -1;
-unsigned long part_start;
-unsigned long part_length;
-int using_devsize;
-
-unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long long result = 0,value;
-
-	if (!base) {
-		base = 10;
-		if (*cp == '0') {
-			base = 8;
-			cp++;
-			if ((*cp == 'x') && isxdigit(cp[1])) {
-				cp++;
-				base = 16;
-			}
-		}
-	}
-	while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
-		? toupper(*cp) : *cp)-'A'+10) < base) {
-		result = result*base + value;
-		cp++;
-	}
-	if (endp)
-		*endp = (char *)cp;
-	return result;
-}
-
-unsigned long long strtoull_with_suffix(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long long result;
-
-	if (!endp) {
-		return 0;
-	}
-	result = simple_strtoull(cp, endp, base);
-	switch (toupper(**endp)) {
-	case 'K':
-		result <<= 10;
-		++*endp;
-		break;
-	case 'M':
-		result <<= 20;
-		++*endp;
-		break;
-	case 'G':
-		result <<= 30;
-		++*endp;
-		break;
-	}
-	return result;
-}
-
-unsigned int get_le32(const unsigned char *p)
-{
-    return ((unsigned int) p[0] << 0)
-        | ((unsigned int) p[1] << 8)
-        | ((unsigned int) p[2] << 16)
-        | ((unsigned int) p[3] << 24);
-}
-
-static inline int has_pc_part_magic(unsigned char *sect)
-{
-    return sect[510]==0x55 && sect[511]==0xAA;
-}
-
-static inline int is_pc_extended_part(unsigned char type)
-{
-    return type==5 || type==0xf || type==0x85;
-}
-
-/* IBM-PC/MS-DOS style partitioning scheme */
-static int open_pc_partition(int part, unsigned long *start_p,
-	unsigned long *length_p)
-{
-    /* Layout of PC partition table */
-    struct pc_partition {
-	unsigned char boot;
-	unsigned char head;
-	unsigned char sector;
-	unsigned char cyl;
-	unsigned char type;
-	unsigned char e_head;
-	unsigned char e_sector;
-	unsigned char e_cyl;
-	unsigned char start_sect[4]; /* unaligned little endian */
-	unsigned char nr_sects[4]; /* ditto */
-    } *p;
-    unsigned char buf[512];
-
-    /* PC partition probe */
-    if (!devread(0, 0, sizeof buf, buf)) {
-	printk_debug("device read failed\n");
-	return 0;
-    }
-    if (!has_pc_part_magic(buf)) {
-	printk_debug("pc partition magic number not found\n");
-	//printk_debug_hexdump(buf, 512);
-	return PARTITION_UNKNOWN;
-    }
-    p = (struct pc_partition *) (buf + 0x1be);
-    if (part < 4) {
-	/* Primary partition */
-	p += part;
-	if (p->type==0 || is_pc_extended_part(p->type)) {
-	    printk_info("Partition %d does not exist\n", part+1);
-	    return 0;
-	}
-	*start_p = get_le32(p->start_sect);
-	*length_p = get_le32(p->nr_sects);
-	return 1;
-    } else {
-	/* Extended partition */
-	int i;
-	int cur_part;
-	unsigned long ext_start, cur_table;
-	/* Search for the extended partition
-	 * which contains logical partitions */
-	for (i = 0; i < 4; i++) {
-	    if (is_pc_extended_part(p[i].type))
-		break;
-	}
-	if (i >= 4) {
-	    printk_info("Extended partition not found\n");
-	    return 0;
-	}
-	printk_debug("Extended partition at %d\n", i+1);
-	/* Visit each logical partition labels */
-	ext_start = get_le32(p[i].start_sect);
-	cur_table = ext_start;
-	cur_part = 4;
-	for (;;) {
-	    printk_debug("cur_part=%d at %lu\n", cur_part, cur_table);
-	    if (!devread(cur_table, 0, sizeof buf, buf))
-		return 0;
-	    if (!has_pc_part_magic(buf)) {
-		printk_debug("no magic\n");
-		break;
-	    }
-
-	    p = (struct pc_partition *) (buf + 0x1be);
-	    /* First entry is the logical partition */
-	    if (cur_part == part) {
-		if (p->type==0) {
-		    printk_info("Partition %d is empty\n", part+1);
-		    return 0;
-		}
-		*start_p = cur_table + get_le32(p->start_sect);
-		*length_p = get_le32(p->nr_sects);
-		return 1;
-	    }
-	    /* Second entry is link to next partition */
-	    if (!is_pc_extended_part(p[1].type)) {
-		printk_debug("no link\n");
-		break;
-	    }
-	    cur_table = ext_start + get_le32(p[1].start_sect);
-
-	    cur_part++;
-	}
-	printk_info("Logical partition %d not exist\n", part+1);
-	return 0;
-    }
-}
-
-static void flush_cache(void)
-{
-    int i;
-    for (i = 0; i < NUM_CACHE; i++)
-	cache_sect[i] = (unsigned long) -1;
-}
-
-static int parse_device_name(const char *name, int *type, int *drive,
-	int *part, uint64_t *offset, uint64_t *length)
-{
-    *offset = *length = 0;
-
-    if (memcmp(name, "hd", 2) == 0) {
-	*type = DISK_IDE;
-	name += 2;
-	if (*name < 'a' || *name > 'z') {
-	    printk_info("Invalid drive\n");
-	    return 0;
-	}
-	*drive = *name - 'a';
-	name++;
-    } else if (memcmp(name, "mem", 3) == 0) {
-	*type = DISK_MEM;
-	name += 3;
-	*drive = 0;
-    } else {
-	printk_info("Unknown device type\n");
-	return 0;
-    }
-
-    *part = (int) simple_strtoull(name, (char **)&name, 0);
-
-    if (*name == '@') {
-	name++;
-	*offset = strtoull_with_suffix(name, (char **)&name, 0);
-	if (*name == ',')
-	    *length = strtoull_with_suffix(name+1, (char **)&name, 0);
-	printk_debug("offset=%#Lx length=%#Lx\n", *offset, *length);
-    }
-
-    if (*name != '\0') {
-	printk_info("Can't parse device name\n");
-	return 0;
-    }
-
-    return 1;
-}
-
-int devopen(const char *name, int *reopen)
-{
-    int type, drive, part, i;
-    uint64_t offset, length;
-    uint32_t disk_size = 0;
-
-    /* Don't re-open the device that's already open */
-    if (strcmp(name, dev_name) == 0) {
-	printk_debug("already open\n");
-	*reopen = 1;
-	return 1;
-    }
-    *reopen = 0;
-
-    if (!parse_device_name(name, &type, &drive, &part, &offset, &length)) {
-	printk_debug("failed to parse device name: %s\n", name);
-	return 0;
-    }
-
-    /* Do simple sanity check first */
-    if (offset & 0x1ff) {
-	printk_info("Device offset must be multiple of 512\n");
-	return 0;
-    }
-    if (length & 0x1ff) {
-	printk_info("WARNING: length is rounded up to multiple of 512\n");
-	length = (length + 0x1ff) & ~0x1ff;
-    }
-
-    switch (type) {
-    case DISK_IDE:
-	printk_debug ("Trying polled ide\n");
-	printk_debug ("Waiting for ide disks to spin up\n");
-	printk_notice ("This is a hard coded delay and longer than necessary.\n");
-	for (i = 0; i < 2; i++) {
-		printk_notice (".");
-		delay(1);
-	}
-	printk_info ("\n");
-
-	if (ide_probe(drive) != 0) {
-	    printk_debug("failed to open ide\n");
-	    return 0;
-	}
-	disk_size = (uint32_t) -1; /* FIXME */
-	break;
-    case DISK_MEM:
-	disk_size = 1 << (32 - 9); /* 4GB/512-byte */
-	break;
-    default:
-	printk_info("Unknown device type %d\n", type);
-	return 0;
-    }
-
-    if (dev_type != type || dev_drive != drive)
-	flush_cache();
-
-    /* start with whole disk */
-    dev_type = type;
-    dev_drive = drive;
-    part_start = 0;
-    part_length = disk_size;
-    using_devsize = 1;
-
-    if (part != 0) {
-	/* partition is specified */
-	int ret;
-	ret = open_pc_partition(part - 1, &part_start, &part_length);
-	if (ret == PARTITION_UNKNOWN) {
-	    ret = open_eltorito_image(part - 1, &part_start, &part_length);
-	    if (ret == PARTITION_UNKNOWN) {
-		printk_info("Unrecognized partitioning scheme\n");
-		return 0;
-	    }
-	}
-	if (ret == 0) {
-	    printk_debug("can't open partition %d\n", part);
-	    return 0;
-	}
-
-	printk_debug("Partition %d start %lu length %lu\n", part,
-		part_start, part_length);
-    }
-
-    if (offset) {
-	if (offset >= (uint64_t) part_length << 9) {
-	    printk_info("Device offset is too high\n");
-	    return 0;
-	}
-	part_start += offset >> 9;
-	part_length -= offset >> 9;
-	printk_debug("after offset: start %lu, length %lu\n", part_start, part_length);
-    }
-
-    if (length) {
-	if (length > (uint64_t) part_length << 9) {
-	    printk_info("Specified length exceeds the size of device\n");
-	    return 0;
-	}
-	part_length = length >> 9;
-	printk_debug("after length: length %lu\n", part_length);
-	using_devsize = 0;
-    }
-
-    strncpy(dev_name, name, sizeof dev_name-1);
-
-    return 1;
-}
-
-/* Read a sector from opened device with simple/stupid buffer cache */
-static void *read_sector(unsigned long sector)
-{
-    unsigned int hash;
-    void *buf;
-
-    /* If reading memory, just return the memory as the buffer */
-    if (dev_type == DISK_MEM) {
-	unsigned long phys = sector << 9;
-	//printk_debug("mem: %#lx\n", phys);
-	return (void *)phys;
-    }
-
-    /* Search in the cache */
-    hash = sector % NUM_CACHE;
-    buf = buf_cache[hash];
-    if (cache_sect[hash] != sector) {
-	cache_sect[hash] = (unsigned long) -1;
-	switch (dev_type) {
-	case DISK_IDE:
-	    if (ide_read(dev_drive, sector, buf) != 0)
-		goto readerr;
-	    break;
-	default:
-	    printk_info("read_sector: device not open\n");
-	    return 0;
-	}
-	cache_sect[hash] = sector;
-    }
-    return buf;
-
-readerr:
-    printk_info("Disk read error dev=%d drive=%d sector=%lu\n",
-	    dev_type, dev_drive, sector);
-    dev_name[0] = '\0'; /* force re-open the device next time */
-    return 0;
-}
-
-int devread(unsigned long sector, unsigned long byte_offset,
-	unsigned long byte_len, void *buf)
-{
-    char *sector_buffer;
-    char *dest = buf;
-    unsigned long len;
-
-    sector += byte_offset >> 9;
-    byte_offset &= 0x1ff;
-
-    if (sector + ((byte_len + 0x1ff) >> 9) > part_length) {
-	printk_info("Attempt to read out of device/partition\n");
-	printk_debug("sector=%lu part_length=%lu byte_len=%lu\n",
-		sector, part_length, byte_len);
-	return 0;
-    }
-
-    while (byte_len > 0) {
-	sector_buffer = read_sector(part_start + sector);
-	if (!sector_buffer) {
-	    printk_debug("read sector failed\n");
-	    return 0;
-	}
-	len = 512 - byte_offset;
-	if (len > byte_len)
-	    len = byte_len;
-	memcpy(dest, sector_buffer + byte_offset, len);
-	sector++;
-	byte_offset = 0;
-	byte_len -= len;
-	dest += len;
-    }
-    return 1;
-}
diff --git a/src/stream/fs/ext2fs.c b/src/stream/fs/ext2fs.c
deleted file mode 100644
index 9cf0bc6..0000000
--- a/src/stream/fs/ext2fs.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- *  GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 1999, 2001  Free Software Foundation, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <console/console.h>
-#include <fs/fs.h>
-#include <string.h>
-#include <arch/byteorder.h>
-
-static int mapblock1, mapblock2;
-
-/* sizes are always in bytes, BLOCK values are always in DEV_BSIZE (sectors) */
-#define DEV_BSIZE 512
-
-/* include/linux/fs.h */
-#define BLOCK_SIZE 1024		/* initial block size for superblock read */
-/* made up, defaults to 1 but can be passed via mount_opts */
-#define WHICH_SUPER 1
-/* kind of from fs/ext2/super.c */
-#define SBLOCK (WHICH_SUPER * BLOCK_SIZE / DEV_BSIZE)	/* = 2 */
-
-/* include/asm-i386/types.h */
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-/*
- * Constants relative to the data blocks, from ext2_fs.h
- */
-#define EXT2_NDIR_BLOCKS                12
-#define EXT2_IND_BLOCK                  EXT2_NDIR_BLOCKS
-#define EXT2_DIND_BLOCK                 (EXT2_IND_BLOCK + 1)
-#define EXT2_TIND_BLOCK                 (EXT2_DIND_BLOCK + 1)
-#define EXT2_N_BLOCKS                   (EXT2_TIND_BLOCK + 1)
-
-/* include/linux/ext2_fs.h */
-struct ext2_super_block
-  {
-    __u32 s_inodes_count;	/* Inodes count */
-    __u32 s_blocks_count;	/* Blocks count */
-    __u32 s_r_blocks_count;	/* Reserved blocks count */
-    __u32 s_free_blocks_count;	/* Free blocks count */
-    __u32 s_free_inodes_count;	/* Free inodes count */
-    __u32 s_first_data_block;	/* First Data Block */
-    __u32 s_log_block_size;	/* Block size */
-    __s32 s_log_frag_size;	/* Fragment size */
-    __u32 s_blocks_per_group;	/* # Blocks per group */
-    __u32 s_frags_per_group;	/* # Fragments per group */
-    __u32 s_inodes_per_group;	/* # Inodes per group */
-    __u32 s_mtime;		/* Mount time */
-    __u32 s_wtime;		/* Write time */
-    __u16 s_mnt_count;		/* Mount count */
-    __s16 s_max_mnt_count;	/* Maximal mount count */
-    __u16 s_magic;		/* Magic signature */
-    __u16 s_state;		/* File system state */
-    __u16 s_errors;		/* Behaviour when detecting errors */
-    __u16 s_pad;
-    __u32 s_lastcheck;		/* time of last check */
-    __u32 s_checkinterval;	/* max. time between checks */
-    __u32 s_creator_os;		/* OS */
-    __u32 s_rev_level;		/* Revision level */
-    __u16 s_def_resuid;		/* Default uid for reserved blocks */
-    __u16 s_def_resgid;		/* Default gid for reserved blocks */
-    __u32 s_reserved[235];	/* Padding to the end of the block */
-  };
-
-struct ext2_group_desc
-  {
-    __u32 bg_block_bitmap;	/* Blocks bitmap block */
-    __u32 bg_inode_bitmap;	/* Inodes bitmap block */
-    __u32 bg_inode_table;	/* Inodes table block */
-    __u16 bg_free_blocks_count;	/* Free blocks count */
-    __u16 bg_free_inodes_count;	/* Free inodes count */
-    __u16 bg_used_dirs_count;	/* Directories count */
-    __u16 bg_pad;
-    __u32 bg_reserved[3];
-  };
-
-struct ext2_inode
-  {
-    __u16 i_mode;		/* File mode */
-    __u16 i_uid;		/* Owner Uid */
-    __u32 i_size;		/* 4: Size in bytes */
-    __u32 i_atime;		/* Access time */
-    __u32 i_ctime;		/* 12: Creation time */
-    __u32 i_mtime;		/* Modification time */
-    __u32 i_dtime;		/* 20: Deletion Time */
-    __u16 i_gid;		/* Group Id */
-    __u16 i_links_count;	/* 24: Links count */
-    __u32 i_blocks;		/* Blocks count */
-    __u32 i_flags;		/* 32: File flags */
-    union
-      {
-	struct
-	  {
-	    __u32 l_i_reserved1;
-	  }
-	linux1;
-	struct
-	  {
-	    __u32 h_i_translator;
-	  }
-	hurd1;
-	struct
-	  {
-	    __u32 m_i_reserved1;
-	  }
-	masix1;
-      }
-    osd1;			/* OS dependent 1 */
-    __u32 i_block[EXT2_N_BLOCKS];	/* 40: Pointers to blocks */
-    __u32 i_version;		/* File version (for NFS) */
-    __u32 i_file_acl;		/* File ACL */
-    __u32 i_dir_acl;		/* Directory ACL */
-    __u32 i_faddr;		/* Fragment address */
-    union
-      {
-	struct
-	  {
-	    __u8 l_i_frag;	/* Fragment number */
-	    __u8 l_i_fsize;	/* Fragment size */
-	    __u16 i_pad1;
-	    __u32 l_i_reserved2[2];
-	  }
-	linux2;
-	struct
-	  {
-	    __u8 h_i_frag;	/* Fragment number */
-	    __u8 h_i_fsize;	/* Fragment size */
-	    __u16 h_i_mode_high;
-	    __u16 h_i_uid_high;
-	    __u16 h_i_gid_high;
-	    __u32 h_i_author;
-	  }
-	hurd2;
-	struct
-	  {
-	    __u8 m_i_frag;	/* Fragment number */
-	    __u8 m_i_fsize;	/* Fragment size */
-	    __u16 m_pad1;
-	    __u32 m_i_reserved2[2];
-	  }
-	masix2;
-      }
-    osd2;			/* OS dependent 2 */
-  };
-
-/* linux/limits.h */
-#define NAME_MAX         255	/* # chars in a file name */
-
-/* linux/posix_type.h */
-typedef long linux_off_t;
-
-/* linux/ext2fs.h */
-#define EXT2_NAME_LEN 255
-struct ext2_dir_entry
-  {
-    __u32 inode;		/* Inode number */
-    __u16 rec_len;		/* Directory entry length */
-    __u8 name_len;		/* Name length */
-    __u8 file_type;
-    char name[EXT2_NAME_LEN];	/* File name */
-  };
-
-/* linux/ext2fs.h */
-/*
- * EXT2_DIR_PAD defines the directory entries boundaries
- *
- * NOTE: It must be a multiple of 4
- */
-#define EXT2_DIR_PAD                    4
-#define EXT2_DIR_ROUND                  (EXT2_DIR_PAD - 1)
-#define EXT2_DIR_REC_LEN(name_len)      (((name_len) + 8 + EXT2_DIR_ROUND) & \
-                                         ~EXT2_DIR_ROUND)
-
-
-/* ext2/super.c */
-#define log2(n) ffz(~(n))
-
-#define EXT2_SUPER_MAGIC      0xEF53	/* include/linux/ext2_fs.h */
-#define EXT2_ROOT_INO              2	/* include/linux/ext2_fs.h */
-#define PATH_MAX                1024	/* include/linux/limits.h */
-#define MAX_LINK_COUNT             5	/* number of symbolic links to follow */
-
-/* made up, these are pointers into FSYS_BUF */
-/* read once, always stays there: */
-#define SUPERBLOCK \
-    ((struct ext2_super_block *)(FSYS_BUF))
-#define GROUP_DESC \
-    ((struct ext2_group_desc *) \
-     ((int)SUPERBLOCK + sizeof(struct ext2_super_block)))
-#define INODE \
-    ((struct ext2_inode *)((int)GROUP_DESC + EXT2_BLOCK_SIZE(SUPERBLOCK)))
-#define DATABLOCK1 \
-    ((int)((int)INODE + sizeof(struct ext2_inode)))
-#define DATABLOCK2 \
-    ((int)((int)DATABLOCK1 + EXT2_BLOCK_SIZE(SUPERBLOCK)))
-
-/* linux/ext2_fs.h */
-#define EXT2_ADDR_PER_BLOCK(s)          (EXT2_BLOCK_SIZE(s) / sizeof (__u32))
-#define EXT2_ADDR_PER_BLOCK_BITS(s)		(log2(EXT2_ADDR_PER_BLOCK(s)))
-
-/* linux/ext2_fs.h */
-#define EXT2_BLOCK_SIZE_BITS(s)        (le32_to_cpu((s)->s_log_block_size) + 10)
-/* kind of from ext2/super.c */
-#define EXT2_BLOCK_SIZE(s)	(1 << EXT2_BLOCK_SIZE_BITS(s))
-/* linux/ext2fs.h */
-#define EXT2_DESC_PER_BLOCK(s) \
-     (EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc))
-/* linux/stat.h */
-#define S_IFMT  00170000
-#define S_IFLNK  0120000
-#define S_IFREG  0100000
-#define S_IFDIR  0040000
-#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m)      (((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m)      (((m) & S_IFMT) == S_IFDIR)
-
-/* include/asm-i386/bitops.h */
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-#ifdef __i386
-static __inline__ unsigned long
-ffz (unsigned long word)
-{
-  __asm__ ("bsfl %1,%0"
-:	   "=r" (word)
-:	   "r" (~word));
-  return word;
-}
-#else /* !PPC */
-static __inline__ unsigned long
- __ilog2(unsigned long x)
-{
-        unsigned long lz;
- 
-        asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
-        return 31 - lz;
-}
-static __inline__ unsigned long 
-ffz(unsigned long x)
-{
-        if ((x = ~x) == 0)
-                return 32;
-        return __ilog2(x & -x);
-}
-#endif
-
-/* check filesystem types and read superblock into memory buffer */
-int
-ext2fs_mount (void)
-{
-  int retval = 1;
-
-  if ((((current_drive & 0x80) || (current_slice != 0))
-       && (current_slice != PC_SLICE_TYPE_EXT2FS)
-       && (current_slice != PC_SLICE_TYPE_LINUX_RAID)
-       && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_EXT2FS))
-       && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_OTHER)))
-      || part_length < (SBLOCK + (sizeof (struct ext2_super_block) / DEV_BSIZE))
-      || !devread (SBLOCK, 0, sizeof (struct ext2_super_block),
-		   (char *) SUPERBLOCK)
-      || le16_to_cpu(SUPERBLOCK->s_magic) != EXT2_SUPER_MAGIC)
-      retval = 0;
-
-  return retval;
-}
-
-/* Takes a file system block number and reads it into BUFFER. */
-static int
-ext2_rdfsb (int fsblock, int buffer)
-{
-#ifdef E2DEBUG
-  printk_debug ("fsblock %d buffer %d\n", fsblock, buffer);
-#endif /* E2DEBUG */
-  return devread (fsblock * (EXT2_BLOCK_SIZE (SUPERBLOCK) / DEV_BSIZE), 0,
-		  EXT2_BLOCK_SIZE (SUPERBLOCK), (char *) buffer);
-}
-
-/* from
-  ext2/inode.c:ext2_bmap()
-*/
-/* Maps LOGICAL_BLOCK (the file offset divided by the blocksize) into
-   a physical block (the location in the file system) via an inode. */
-static int
-ext2fs_block_map (int logical_block)
-{
-
-#ifdef E2DEBUG
-  unsigned char *i;
-  for (i = (unsigned char *) INODE;
-       i < ((unsigned char *) INODE + sizeof (struct ext2_inode));
-       i++)
-    {
-      printk_debug ("%c", "0123456789abcdef"[*i >> 4]);
-      printk_debug ("%c", "0123456789abcdef"[*i % 16]);
-      if (!((i + 1 - (unsigned char *) INODE) % 16))
-	{
-	  printk_debug ("\n");
-	}
-      else
-	{
-	  printk_debug (" ");
-	}
-    }
-  printk_debug ("logical block %d\n", logical_block);
-#endif /* E2DEBUG */
-
-  /* if it is directly pointed to by the inode, return that physical addr */
-  if (logical_block < EXT2_NDIR_BLOCKS)
-    {
-#ifdef E2DEBUG
-      printk_debug ("returning %d\n", (unsigned char *) (le32_to_cpu(INODE->i_block[logical_block])));
-      printk_debug ("returning %d\n", le32_to_cpu(INODE->i_block[logical_block]));
-#endif /* E2DEBUG */
-      return le32_to_cpu(INODE->i_block[logical_block]);
-    }
-  /* else */
-  logical_block -= EXT2_NDIR_BLOCKS;
-  /* try the indirect block */
-  if (logical_block < EXT2_ADDR_PER_BLOCK (SUPERBLOCK))
-    {
-      if (mapblock1 != 1
-	  && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_IND_BLOCK]), DATABLOCK1))
-	{
-	  errnum = ERR_FSYS_CORRUPT;
-	  return -1;
-	}
-      mapblock1 = 1;
-      return le32_to_cpu(((__u32 *) DATABLOCK1)[logical_block]);
-    }
-  /* else */
-  logical_block -= EXT2_ADDR_PER_BLOCK (SUPERBLOCK);
-  /* now try the double indirect block */
-  if (logical_block < (1 << (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK) * 2)))
-    {
-      int bnum;
-      if (mapblock1 != 2
-	  && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_DIND_BLOCK]), DATABLOCK1))
-	{
-	  errnum = ERR_FSYS_CORRUPT;
-	  return -1;
-	}
-      mapblock1 = 2;
-      if ((bnum = le32_to_cpu(((__u32 *) DATABLOCK1)
-		   [logical_block >> EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK)]))
-	  != mapblock2
-	  && !ext2_rdfsb (bnum, DATABLOCK2))
-	{
-	  errnum = ERR_FSYS_CORRUPT;
-	  return -1;
-	}
-      mapblock2 = bnum;
-      return le32_to_cpu(((__u32 *) DATABLOCK2)
-	[logical_block & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]);
-    }
-  /* else */
-  mapblock2 = -1;
-  logical_block -= (1 << (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK) * 2));
-  if (mapblock1 != 3
-      && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_TIND_BLOCK]), DATABLOCK1))
-    {
-      errnum = ERR_FSYS_CORRUPT;
-      return -1;
-    }
-  mapblock1 = 3;
-  if (!ext2_rdfsb (le32_to_cpu(((__u32 *) DATABLOCK1)
-		   [logical_block >> (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK)
-				      * 2)]),
-		   DATABLOCK2))
-    {
-      errnum = ERR_FSYS_CORRUPT;
-      return -1;
-    }
-  if (!ext2_rdfsb (le32_to_cpu(((__u32 *) DATABLOCK2)
-		   [(logical_block >> EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK))
-		    & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]),
-		   DATABLOCK2))
-    {
-      errnum = ERR_FSYS_CORRUPT;
-      return -1;
-    }
-  return le32_to_cpu(((__u32 *) DATABLOCK2)
-    [logical_block & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]);
-}
-
-/* preconditions: all preconds of ext2fs_block_map */
-int
-ext2fs_read (char *buf, int len)
-{
-  int logical_block;
-  int offset;
-  int map;
-  int ret = 0;
-  int size = 0;
-
-#ifdef E2DEBUG
-  static char hexdigit[] = "0123456789abcdef";
-  unsigned char *i;
-  for (i = (unsigned char *) INODE;
-       i < ((unsigned char *) INODE + sizeof (struct ext2_inode));
-       i++)
-    {
-      printk_debug ("%c", hexdigit[*i >> 4]);
-      printk_debug ("%c", hexdigit[*i % 16]);
-      if (!((i + 1 - (unsigned char *) INODE) % 16))
-	{
-	  printk_debug ("\n");
-	}
-      else
-	{
-	  printk_debug (" ");
-	}
-    }
-#endif /* E2DEBUG */
-  while (len > 0)
-    {
-      /* find the (logical) block component of our location */
-      logical_block = filepos >> EXT2_BLOCK_SIZE_BITS (SUPERBLOCK);
-      offset = filepos & (EXT2_BLOCK_SIZE (SUPERBLOCK) - 1);
-      map = ext2fs_block_map (logical_block);
-#ifdef E2DEBUG
-      printk_debug ("map=%d\n", map);
-#endif /* E2DEBUG */
-      if (map < 0)
-	break;
-
-      size = EXT2_BLOCK_SIZE (SUPERBLOCK);
-      size -= offset;
-      if (size > len)
-	size = len;
-
-      disk_read_func = disk_read_hook;
-
-      devread (map * (EXT2_BLOCK_SIZE (SUPERBLOCK) / DEV_BSIZE),
-	       offset, size, buf);
-
-      disk_read_func = 0;
-
-      buf += size;
-      len -= size;
-      filepos += size;
-      ret += size;
-    }
-
-  if (errnum)
-    ret = 0;
-
-  return ret;
-}
-
-
-/* Based on:
-   def_blk_fops points to
-   blkdev_open, which calls (I think):
-   sys_open()
-   do_open()
-   open_namei()
-   dir_namei() which accesses current->fs->root
-     fs->root was set during original mount:
-     (something)... which calls (I think):
-     ext2_read_super()
-     iget()
-     __iget()
-     read_inode()
-     ext2_read_inode()
-       uses desc_per_block_bits, which is set in ext2_read_super()
-       also uses group descriptors loaded during ext2_read_super()
-   lookup()
-   ext2_lookup()
-   ext2_find_entry()
-   ext2_getblk()
-
-*/
-
-/* preconditions: ext2fs_mount already executed, therefore supblk in buffer
- *   known as SUPERBLOCK
- * returns: 0 if error, nonzero iff we were able to find the file successfully
- * postconditions: on a nonzero return, buffer known as INODE contains the
- *   inode of the file we were trying to look up
- * side effects: messes up GROUP_DESC buffer area
- */
-int
-ext2fs_dir (char *dirname)
-{
-  int current_ino = EXT2_ROOT_INO;	/* start at the root */
-  int updir_ino = current_ino;	/* the parent of the current directory */
-  int group_id;			/* which group the inode is in */
-  int group_desc;		/* fs pointer to that group */
-  int desc;			/* index within that group */
-  int ino_blk;			/* fs pointer of the inode's information */
-  int str_chk = 0;		/* used to hold the results of a string compare */
-  struct ext2_group_desc *gdp;
-  struct ext2_inode *raw_inode;	/* inode info corresponding to current_ino */
-
-  char linkbuf[PATH_MAX];	/* buffer for following symbolic links */
-  int link_count = 0;
-
-  char *rest;
-  char ch;			/* temp char holder */
-
-  int off;			/* offset within block of directory entry (off mod blocksize) */
-  int loc;			/* location within a directory */
-  int blk;			/* which data blk within dir entry (off div blocksize) */
-  long map;			/* fs pointer of a particular block from dir entry */
-  struct ext2_dir_entry *dp;	/* pointer to directory entry */
-#ifdef E2DEBUG
-  unsigned char *i;
-#endif	/* E2DEBUG */
-
-  /* loop invariants:
-     current_ino = inode to lookup
-     dirname = pointer to filename component we are cur looking up within
-     the directory known pointed to by current_ino (if any)
-   */
-
-  while (1)
-    {
-#ifdef E2DEBUG
-      printk_debug ("inode %d\n", current_ino);
-      printk_debug ("dirname=%s\n", dirname);
-#endif /* E2DEBUG */
-
-      /* look up an inode */
-      group_id = (current_ino - 1) / le32_to_cpu(SUPERBLOCK->s_inodes_per_group);
-      group_desc = group_id >> log2 (EXT2_DESC_PER_BLOCK (SUPERBLOCK));
-      desc = group_id & (EXT2_DESC_PER_BLOCK (SUPERBLOCK) - 1);
-#ifdef E2DEBUG
-      printk_debug ("ipg=%d, dpb=%d\n", le32_to_cpu(SUPERBLOCK->s_inodes_per_group),
-	      EXT2_DESC_PER_BLOCK (SUPERBLOCK));
-      printk_debug ("group_id=%d group_desc=%d desc=%d\n", group_id, group_desc, desc);
-#endif /* E2DEBUG */
-      if (!ext2_rdfsb (
-			(WHICH_SUPER + group_desc + le32_to_cpu(SUPERBLOCK->s_first_data_block)),
-			(int) GROUP_DESC))
-	{
-	  return 0;
-	}
-      gdp = GROUP_DESC;
-      ino_blk = le32_to_cpu(gdp[desc].bg_inode_table) +
-	(((current_ino - 1) % le32_to_cpu(SUPERBLOCK->s_inodes_per_group))
-	 >> log2 (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode)));
-#ifdef E2DEBUG
-      printk_debug ("inode table fsblock=%d\n", ino_blk);
-#endif /* E2DEBUG */
-      if (!ext2_rdfsb (ino_blk, (int) INODE))
-	{
-	  return 0;
-	}
-
-      /* reset indirect blocks! */
-      mapblock2 = mapblock1 = -1;
-
-      raw_inode = INODE +
-	((current_ino - 1)
-	 & (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode) - 1));
-#ifdef E2DEBUG
-      printk_debug ("ipb=%d, sizeof(inode)=%d\n",
-	      (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode)),
-	      sizeof (struct ext2_inode));
-      printk_debug ("inode=%x, raw_inode=%x\n", INODE, raw_inode);
-      printk_debug ("offset into inode table block=%d\n", (int) raw_inode - (int) INODE);
-      for (i = (unsigned char *) INODE; i <= (unsigned char *) raw_inode;
-	   i++)
-	{
-	  printk_debug ("%c", "0123456789abcdef"[*i >> 4]);
-	  printk_debug ("%c", "0123456789abcdef"[*i % 16]);
-	  if (!((i + 1 - (unsigned char *) INODE) % 16))
-	    {
-	      printk_debug ("\n");
-	    }
-	  else
-	    {
-	      printk_debug (" ");
-	    }
-	}
-      printk_debug ("first word=%x\n", *((int *) raw_inode));
-#endif /* E2DEBUG */
-
-      /* copy inode to fixed location */
-      memmove ((void *) INODE, (void *) raw_inode, sizeof (struct ext2_inode));
-
-#ifdef E2DEBUG
-      printk_debug ("first word=%x\n", *((int *) INODE));
-#endif /* E2DEBUG */
-
-      /* If we've got a symbolic link, then chase it. */
-      if (S_ISLNK (le16_to_cpu(INODE->i_mode)))
-	{
-	  int len;
-	  if (++link_count > MAX_LINK_COUNT)
-	    {
-	      errnum = ERR_SYMLINK_LOOP;
-	      return 0;
-	    }
-
-	  /* Find out how long our remaining name is. */
-	  len = 0;
-	  while (dirname[len] && !isspace (dirname[len]))
-	    len++;
-
-	  /* Get the symlink size. */
-	  filemax = le32_to_cpu(INODE->i_size);
-	  if (filemax + len > sizeof (linkbuf) - 2)
-	    {
-	      errnum = ERR_FILELENGTH;
-	      return 0;
-	    }
-
-	  if (len)
-	    {
-	      /* Copy the remaining name to the end of the symlink data.
-	         Note that DIRNAME and LINKBUF may overlap! */
-	      memmove (linkbuf + filemax, dirname, len);
-	    }
-	  linkbuf[filemax + len] = '\0';
-
-	  /* Read the symlink data. */
-	  if (le32_to_cpu(INODE->i_blocks))
-	    {
-	      /* Read the necessary blocks, and reset the file pointer. */
-	      len = file_read (linkbuf, filemax);
-	      filepos = 0;
-	      if (!len)
-		return 0;
-	    }
-	  else
-	    {
-	      /* Copy the data directly from the inode. */
-	      len = filemax;
-	      memmove (linkbuf, (char *) INODE->i_block, len);
-	    }
-
-#ifdef E2DEBUG
-	  printk_debug ("symlink=%s\n", linkbuf);
-#endif
-
-	  dirname = linkbuf;
-	  if (*dirname == '/')
-	    {
-	      /* It's an absolute link, so look it up in root. */
-	      current_ino = EXT2_ROOT_INO;
-	      updir_ino = current_ino;
-	    }
-	  else
-	    {
-	      /* Relative, so look it up in our parent directory. */
-	      current_ino = updir_ino;
-	    }
-
-	  /* Try again using the new name. */
-	  continue;
-	}
-
-      /* if end of filename, INODE points to the file's inode */
-      if (!*dirname || isspace (*dirname))
-	{
-	  if (!S_ISREG (le16_to_cpu(INODE->i_mode)))
-	    {
-	      errnum = ERR_BAD_FILETYPE;
-	      return 0;
-	    }
-
-	  filemax = le32_to_cpu(INODE->i_size);
-	  return 1;
-	}
-
-      /* else we have to traverse a directory */
-      updir_ino = current_ino;
-
-      /* skip over slashes */
-      while (*dirname == '/')
-	dirname++;
-
-      /* if this isn't a directory of sufficient size to hold our file, abort */
-      if (!(le32_to_cpu(INODE->i_size)) || !S_ISDIR (le16_to_cpu(INODE->i_mode)))
-	{
-	  errnum = ERR_BAD_FILETYPE;
-	  return 0;
-	}
-
-      /* skip to next slash or end of filename (space) */
-      for (rest = dirname; (ch = *rest) && !isspace (ch) && ch != '/';
-	   rest++);
-
-      /* look through this directory and find the next filename component */
-      /* invariant: rest points to slash after the next filename component */
-      *rest = 0;
-      loc = 0;
-
-      do
-	{
-
-#ifdef E2DEBUG
-	  printk_debug ("dirname=%s, rest=%s, loc=%d\n", dirname, rest, loc);
-#endif /* E2DEBUG */
-
-	  /* if our location/byte offset into the directory exceeds the size,
-	     give up */
-	  if (loc >= le32_to_cpu(INODE->i_size))
-	    {
-	      if (print_possibilities < 0)
-		{
-# if 0
-		  putchar ('\n');
-# endif
-		}
-	      else
-		{
-		  errnum = ERR_FILE_NOT_FOUND;
-		  *rest = ch;
-		}
-	      return (print_possibilities < 0);
-	    }
-
-	  /* else, find the (logical) block component of our location */
-	  blk = loc >> EXT2_BLOCK_SIZE_BITS (SUPERBLOCK);
-
-	  /* we know which logical block of the directory entry we are looking
-	     for, now we have to translate that to the physical (fs) block on
-	     the disk */
-	  map = ext2fs_block_map (blk);
-#ifdef E2DEBUG
-	  printk_debug ("fs block=%d\n", map);
-#endif /* E2DEBUG */
-	  mapblock2 = -1;
-	  if ((map < 0) || !ext2_rdfsb (map, DATABLOCK2))
-	    {
-	      errnum = ERR_FSYS_CORRUPT;
-	      *rest = ch;
-	      return 0;
-	    }
-	  off = loc & (EXT2_BLOCK_SIZE (SUPERBLOCK) - 1);
-	  dp = (struct ext2_dir_entry *) (DATABLOCK2 + off);
-	  /* advance loc prematurely to next on-disk directory entry  */
-	  loc += le16_to_cpu(dp->rec_len);
-
-	  /* NOTE: ext2fs filenames are NOT null-terminated */
-
-#ifdef E2DEBUG
-	  printk_debug ("directory entry ino=%d\n", le32_to_cpu(dp->inode));
-	  if (le32_to_cpu(dp->inode))
-	    printk_debug ("entry=%s\n", dp->name);
-#endif /* E2DEBUG */
-
-	  if (le32_to_cpu(dp->inode))
-	    {
-	      int saved_c = dp->name[dp->name_len];
-
-	      dp->name[dp->name_len] = 0;
-	      str_chk = substring (dirname, dp->name);
-
-# ifndef STAGE1_5
-	      if (print_possibilities && ch != '/'
-		  && (!*dirname || str_chk <= 0))
-		{
-		  if (print_possibilities > 0)
-		    print_possibilities = -print_possibilities;
-		  print_a_completion (dp->name);
-		}
-# endif
-
-	      dp->name[dp->name_len] = saved_c;
-	    }
-
-	}
-      while (!le32_to_cpu(dp->inode) || (str_chk || (print_possibilities && ch != '/')));
-
-      current_ino = le32_to_cpu(dp->inode);
-      *(dirname = rest) = ch;
-    }
-  /* never get here */
-}
diff --git a/src/stream/fs/fat.c b/src/stream/fs/fat.c
deleted file mode 100644
index 01e4e03..0000000
--- a/src/stream/fs/fat.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- *  GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000, 2001   Free Software Foundation, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <fs/fs.h>
-#include <fs/fat.h>
-#include <arch/byteorder.h>
-
-struct fat_superblock 
-{
-  int fat_offset;
-  int fat_length;
-  int fat_size;
-  int root_offset;
-  int root_max;
-  int data_offset;
-  
-  int num_sectors;
-  int num_clust;
-  int clust_eof_marker;
-  int sects_per_clust;
-  int sectsize_bits;
-  int clustsize_bits;
-  int root_cluster;
-  
-  int cached_fat;
-  int file_cluster;
-  int current_cluster_num;
-  int current_cluster;
-};
-
-/* pointer(s) into filesystem info buffer for DOS stuff */
-#define FAT_SUPER ( (struct fat_superblock *) \
- 		    ( FSYS_BUF + 32256) )/* 512 bytes long */
-#define FAT_BUF   ( FSYS_BUF + 30208 )	/* 4 sector FAT buffer */
-#define NAME_BUF  ( FSYS_BUF + 29184 )	/* Filename buffer (833 bytes) */
-
-#define FAT_CACHE_SIZE 2048
-
-#ifdef __i386
-static __inline__ unsigned long
-log2 (unsigned long word)
-{
-  __asm__ ("bsfl %1,%0"
-	   : "=r" (word)
-	   : "r" (word));
-  return word;
-}
-#else /* !PPC */
-static __inline__ unsigned long
-__ilog2(unsigned long x) 
-{
-        unsigned long lz;
-
-        asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
-        return 31 - lz;
-}
-static __inline__ unsigned long
-log2(unsigned long x)
-{
-        return __ilog2(x & -x);
-}
-#endif
-
-int
-fat_mount (void)
-{
-  struct fat_bpb bpb;
-  __u32 magic, first_fat;
-  
-  /* Check partition type for harddisk */
-  if (((current_drive & 0x80) || (current_slice != 0))
-      && ! IS_PC_SLICE_TYPE_FAT (current_slice)
-      && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_MSDOS)))
-    return 0;
-  
-  /* Read bpb */
-  if (! devread (0, 0, sizeof (bpb), (char *) &bpb))
-    return 0;
-
-  /* Check if the number of sectors per cluster is zero here, to avoid
-     zero division.  */
-  if (bpb.sects_per_clust == 0)
-    return 0;
-
-  FAT_SUPER->sectsize_bits = log2(FAT_CVT_U16(bpb.bytes_per_sect));
-  FAT_SUPER->clustsize_bits
-    = FAT_SUPER->sectsize_bits + log2(bpb.sects_per_clust);
-
-printk_debug("BytsPerSec = %d\n", FAT_CVT_U16(bpb.bytes_per_sect));
-printk_debug("SecPerClus = %d\n", bpb.sects_per_clust);
-  
-  /* Fill in info about super block */
-  FAT_SUPER->num_sectors = FAT_CVT_U16(bpb.short_sectors)
-    ? FAT_CVT_U16(bpb.short_sectors) : FAT_CVT_U32(bpb.long_sectors);
-
-printk_debug("TotSec16 = %d\n", FAT_CVT_U16(bpb.short_sectors));
-printk_debug("TotSec32 = %d\n", FAT_CVT_U32(bpb.long_sectors));
-  
-  /* FAT offset and length */
-  FAT_SUPER->fat_offset = FAT_CVT_U16(bpb.reserved_sects);
-  FAT_SUPER->fat_length = FAT_CVT_U16(bpb.fat_length) 
-    ? FAT_CVT_U16(bpb.fat_length) : FAT_CVT_U32(bpb.fat32_length);
-
-printk_debug("RsvdSecCnt = %d\n", FAT_CVT_U16(bpb.reserved_sects));
-printk_debug("FATSx16 = %d\n", FAT_CVT_U16(bpb.fat_length));
-printk_debug("FATSx32 = %d\n", FAT_CVT_U32(bpb.fat32_length));
-  
-  /* Rootdir offset and length for FAT12/16 */
-  FAT_SUPER->root_offset = 
-    FAT_SUPER->fat_offset + bpb.num_fats * FAT_SUPER->fat_length;
-  FAT_SUPER->root_max = FAT_DIRENTRY_LENGTH * FAT_CVT_U16(bpb.dir_entries);
-
-printk_debug("RootEntCnt = %d\n", FAT_CVT_U16(bpb.dir_entries));
-  
-  /* Data offset and number of clusters */
-  FAT_SUPER->data_offset = 
-    FAT_SUPER->root_offset
-    + ((FAT_SUPER->root_max - 1) >> FAT_SUPER->sectsize_bits) + 1;
-  FAT_SUPER->num_clust = 
-    2 + ((FAT_SUPER->num_sectors - FAT_SUPER->data_offset) 
-	 / bpb.sects_per_clust);
-  FAT_SUPER->sects_per_clust = bpb.sects_per_clust;
-
-  if (!bpb.fat_length)
-    {
-      /* This is a FAT32 */
-      if (FAT_CVT_U16(bpb.dir_entries))
- 	return 0;
-      
-printk_debug("We seem to be FAT32\n");
-printk_debug("ExtFlags = 0x%x\n", FAT_CVT_U16(bpb.flags));
-printk_debug("RootClus = %d\n", FAT_CVT_U32(bpb.root_cluster));
-      if (FAT_CVT_U16(bpb.flags) & 0x0080)
-	{
-	  /* FAT mirroring is disabled, get active FAT */
-	  int active_fat = FAT_CVT_U16(bpb.flags) & 0x000f;
-	  if (active_fat >= bpb.num_fats)
-	    return 0;
-	  FAT_SUPER->fat_offset += active_fat * FAT_SUPER->fat_length;
-	}
-      
-      FAT_SUPER->fat_size = 8;
-      FAT_SUPER->root_cluster = FAT_CVT_U32(bpb.root_cluster);
-
-      /* Yes the following is correct.  FAT32 should be called FAT28 :) */
-      FAT_SUPER->clust_eof_marker = 0xffffff8;
-    } 
-  else 
-    {
-      if (!FAT_SUPER->root_max)
- 	return 0;
-      
-printk_debug("We seem to be FAT12/16\n");
-      FAT_SUPER->root_cluster = -1;
-      if (FAT_SUPER->num_clust > FAT_MAX_12BIT_CLUST) 
-	{
-	  FAT_SUPER->fat_size = 4;
-	  FAT_SUPER->clust_eof_marker = 0xfff8;
-	} 
-      else
-	{
-	  FAT_SUPER->fat_size = 3;
-	  FAT_SUPER->clust_eof_marker = 0xff8;
-	}
-    }
-  
-  /* Now do some sanity checks */
-  
-  if (FAT_CVT_U16(bpb.bytes_per_sect) != (1 << FAT_SUPER->sectsize_bits)
-      || FAT_CVT_U16(bpb.bytes_per_sect) != SECTOR_SIZE
-      || bpb.sects_per_clust != (1 << (FAT_SUPER->clustsize_bits
- 				       - FAT_SUPER->sectsize_bits))
-      || FAT_SUPER->num_clust <= 2
-      || (FAT_SUPER->fat_size * FAT_SUPER->num_clust / (2 * SECTOR_SIZE)
- 	  > FAT_SUPER->fat_length))
-    return 0;
-  
-  /* kbs: Media check on first FAT entry [ported from PUPA] */
-
-  if (!devread(FAT_SUPER->fat_offset, 0,
-               sizeof(first_fat), (char *)&first_fat))
-    return 0;
-
-printk_debug("Media = 0x%x\n", bpb.media);
-
-  if (FAT_SUPER->fat_size == 8)
-    {
-      first_fat = le32_to_cpu(first_fat) & 0x0fffffff;
-      magic = 0x0fffff00;
-    }
-  else if (FAT_SUPER->fat_size == 4)
-    {
-      first_fat = le32_to_cpu(first_fat) & 0x0000ffff;
-      magic = 0xff00;
-    }
-  else
-    {
-      first_fat = le32_to_cpu(first_fat) & 0x00000fff;
-      magic = 0x0f00;
-    }
-
-  if (first_fat != (magic | bpb.media))
-    return 0;
-
-  FAT_SUPER->cached_fat = - 2 * FAT_CACHE_SIZE;
-  return 1;
-}
-
-int
-fat_read (char *buf, int len)
-{
-  int logical_clust;
-  int offset;
-  int ret = 0;
-  int size;
-  
-  if (FAT_SUPER->file_cluster < 0)
-    {
-      /* root directory for fat16 */
-      size = FAT_SUPER->root_max - filepos;
-      if (size > len)
- 	size = len;
-      if (!devread(FAT_SUPER->root_offset, filepos, size, buf))
- 	return 0;
-      filepos += size;
-      return size;
-    }
-  
-  logical_clust = filepos >> FAT_SUPER->clustsize_bits;
-  offset = (filepos & ((1 << FAT_SUPER->clustsize_bits) - 1));
-  if (logical_clust < FAT_SUPER->current_cluster_num)
-    {
-      FAT_SUPER->current_cluster_num = 0;
-      FAT_SUPER->current_cluster = FAT_SUPER->file_cluster;
-    }
-  
-  while (len > 0)
-    {
-      int sector;
-      while (logical_clust > FAT_SUPER->current_cluster_num)
-	{
-	  /* calculate next cluster */
-	  int fat_entry = 
-	    FAT_SUPER->current_cluster * FAT_SUPER->fat_size;
-	  int next_cluster;
-	  int cached_pos = (fat_entry - FAT_SUPER->cached_fat);
-	  
-	  if (cached_pos < 0 || 
-	      (cached_pos + FAT_SUPER->fat_size) > 2*FAT_CACHE_SIZE)
-	    {
-	      FAT_SUPER->cached_fat = (fat_entry & ~(2*SECTOR_SIZE - 1));
-	      cached_pos = (fat_entry - FAT_SUPER->cached_fat);
-	      sector = FAT_SUPER->fat_offset
-		+ FAT_SUPER->cached_fat / (2*SECTOR_SIZE);
-	      if (!devread (sector, 0, FAT_CACHE_SIZE, (char*) FAT_BUF))
-		return 0;
-	    }
-	  next_cluster = FAT_CVT_U32(FAT_BUF + (cached_pos >> 1));
-	  if (FAT_SUPER->fat_size == 3)
-	    {
-	      if (cached_pos & 1)
-		next_cluster >>= 4;
-	      next_cluster &= 0xFFF;
-	    }
-	  else if (FAT_SUPER->fat_size == 4)
-	    next_cluster &= 0xFFFF;
-	  
-	  if (next_cluster >= FAT_SUPER->clust_eof_marker)
-	    return ret;
-	  if (next_cluster < 2 || next_cluster >= FAT_SUPER->num_clust)
-	    {
-	      errnum = ERR_FSYS_CORRUPT;
-	      return 0;
-	    }
-	  
-	  FAT_SUPER->current_cluster = next_cluster;
-	  FAT_SUPER->current_cluster_num++;
-	}
-      
-      sector = FAT_SUPER->data_offset +
-	((FAT_SUPER->current_cluster - 2) << (FAT_SUPER->clustsize_bits
- 					      - FAT_SUPER->sectsize_bits));
-      size = (1 << FAT_SUPER->clustsize_bits) - offset;
-      if (size > len)
-	size = len;
-      
-      disk_read_func = disk_read_hook;
-      
-      devread(sector, offset, size, buf);
-      
-      disk_read_func = 0;
-      
-      len -= size;
-      buf += size;
-      ret += size;
-      filepos += size;
-      logical_clust++;
-      offset = 0;
-    }
-  return errnum ? 0 : ret;
-}
-
-int
-fat_dir (char *dirname)
-{
-  char *rest, ch, dir_buf[FAT_DIRENTRY_LENGTH];
-  char *filename = (char *) NAME_BUF;
-  int attrib = FAT_ATTRIB_DIR;
-#ifndef STAGE1_5
-  int do_possibilities = 0;
-#endif
-  
-  /* XXX I18N:
-   * the positions 2,4,6 etc are high bytes of a 16 bit unicode char 
-   */
-  static unsigned char longdir_pos[] = 
-  { 1, 3, 5, 7, 9, 14, 16, 18, 20, 22, 24, 28, 30 };
-  int slot = -2;
-  int alias_checksum = -1;
-
-  FAT_SUPER->file_cluster = FAT_SUPER->root_cluster;
-  filepos = 0;
-  FAT_SUPER->current_cluster_num = MAXINT;
-  
-  /* main loop to find desired directory entry */
- loop:
-  
-  /* if we have a real file (and we're not just printing possibilities),
-     then this is where we want to exit */
-  
-  if (!*dirname || isspace (*dirname))
-    {
-      if (attrib & FAT_ATTRIB_DIR)
-	{
-	  errnum = ERR_BAD_FILETYPE;
-	  return 0;
-	}
-      
-      return 1;
-    }
-  
-  /* continue with the file/directory name interpretation */
-  
-  while (*dirname == '/')
-    dirname++;
-  
-  if (!(attrib & FAT_ATTRIB_DIR))
-    {
-      errnum = ERR_BAD_FILETYPE;
-      return 0;
-    }
-  /* Directories don't have a file size */
-  filemax = MAXINT;
-  
-  for (rest = dirname; (ch = *rest) && !isspace (ch) && ch != '/'; rest++);
-  
-  *rest = 0;
-  
-# ifndef STAGE1_5
-  if (print_possibilities && ch != '/')
-    do_possibilities = 1;
-# endif
-  
-  while (1)
-    {
-      if (fat_read (dir_buf, FAT_DIRENTRY_LENGTH) != FAT_DIRENTRY_LENGTH
-	  || dir_buf[0] == 0)
-	{
-	  if (!errnum)
-	    {
-# ifndef STAGE1_5
-	      if (print_possibilities < 0)
-		{
-#if 0
-		  putchar ('\n');
-#endif
-		  return 1;
-		}
-# endif /* STAGE1_5 */
-	      
-	      errnum = ERR_FILE_NOT_FOUND;
-	      *rest = ch;
-	    }
-	  
-	  return 0;
-	}
-      
-      if (FAT_DIRENTRY_ATTRIB (dir_buf) == FAT_ATTRIB_LONGNAME)
-	{
-	  /* This is a long filename.  The filename is build from back
-	   * to front and may span multiple entries.  To bind these
-	   * entries together they all contain the same checksum over
-	   * the short alias.
-	   *
-	   * The id field tells if this is the first entry (the last
-	   * part) of the long filename, and also at which offset this
-	   * belongs.
-	   *
-	   * We just write the part of the long filename this entry
-	   * describes and continue with the next dir entry.
-	   */
-	  int i, offset;
-	  unsigned char id = FAT_LONGDIR_ID(dir_buf);
-	  
-	  if ((id & 0x40)) 
-	    {
-	      id &= 0x3f;
-	      slot = id;
-	      filename[slot * 13] = 0;
-	      alias_checksum = FAT_LONGDIR_ALIASCHECKSUM(dir_buf);
-	    } 
-	  
-	  if (id != slot || slot == 0
-	      || alias_checksum != FAT_LONGDIR_ALIASCHECKSUM(dir_buf))
-	    {
-	      alias_checksum = -1;
-	      continue;
-	    }
-	  
-	  slot--;
-	  offset = slot * 13;
-	  
-	  for (i=0; i < 13; i++)
-	    filename[offset+i] = dir_buf[longdir_pos[i]];
-	  continue;
-	}
-      
-      if (!FAT_DIRENTRY_VALID (dir_buf))
-	continue;
-      
-      if (alias_checksum != -1 && slot == 0)
-	{
-	  int i;
-	  unsigned char sum;
-	  
-	  slot = -2;
-	  for (sum = 0, i = 0; i< 11; i++)
-	    sum = ((sum >> 1) | (sum << 7)) + dir_buf[i];
-	  
-	  if (sum == alias_checksum)
-	    {
-# ifndef STAGE1_5
-	      if (do_possibilities)
-		goto print_filename;
-# endif /* STAGE1_5 */
-	      
-	      if (substring (dirname, filename) == 0)
-		break;
-	    }
-	}
-      
-      /* XXX convert to 8.3 filename format here */
-      {
-	int i, j, c;
-	
-	for (i = 0; i < 8 && (c = filename[i] = tolower (dir_buf[i]))
-	       && !isspace (c); i++);
-	
-	filename[i++] = '.';
-	
-	for (j = 0; j < 3 && (c = filename[i + j] = tolower (dir_buf[8 + j]))
-	       && !isspace (c); j++);
-	
-	if (j == 0)
-	  i--;
-	
-	filename[i + j] = 0;
-      }
-      
-# ifndef STAGE1_5
-      if (do_possibilities)
-	{
-	print_filename:
-	  if (substring (dirname, filename) <= 0)
-	    {
-	      if (print_possibilities > 0)
-		print_possibilities = -print_possibilities;
-	      print_a_completion (filename);
-	    }
-	  continue;
-	}
-# endif /* STAGE1_5 */
-      
-      if (substring (dirname, filename) == 0)
-	break;
-    }
-  
-  *(dirname = rest) = ch;
-  
-  attrib = FAT_DIRENTRY_ATTRIB (dir_buf);
-  filemax = FAT_DIRENTRY_FILELENGTH (dir_buf);
-  filepos = 0;
-  FAT_SUPER->file_cluster = FAT_DIRENTRY_FIRST_CLUSTER (dir_buf);
-  FAT_SUPER->current_cluster_num = MAXINT;
-  
-  /* go back to main loop at top of function */
-  goto loop;
-}
diff --git a/src/stream/fs/iso9660.c b/src/stream/fs/iso9660.c
deleted file mode 100644
index 9d36a5c..0000000
--- a/src/stream/fs/iso9660.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *  ISO 9660 filesystem backend for GRUB (GRand Unified Bootloader)
- *  including Rock Ridge Extensions support
- *
- *  Copyright (C) 1998, 1999  Kousuke Takai  <tak@kmc.kyoto-u.ac.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-/*
- *  References:
- *	linux/fs/isofs/rock.[ch]
- *	mkisofs-1.11.1/diag/isoinfo.c
- *	mkisofs-1.11.1/iso9660.h
- *		(all are written by Eric Youngdale)
- *
- *  Modifications by:
- *	Leonid Lisovskiy   <lly@pisem.net>	2003
- */
-
-/*
- * Modified to make it work with FILO
- * 2003-10 by SONE Takeshi
- */
-
-#include <console/console.h>
-#include <fs/fs.h>
-#include <fs/iso9660.h>
-#include <string.h>
-
-struct iso_superblock {
-    unsigned long vol_sector;
-
-    unsigned long file_start;
-};
-
-#define ISO_SUPER	((struct iso_superblock *)(FSYS_BUF))
-#define PRIMDESC        ((struct iso_primary_descriptor *)(FSYS_BUF + 2048))
-#define DIRREC          ((struct iso_directory_record *)(FSYS_BUF + 4096))
-#define RRCONT_BUF      ((unsigned char *)(FSYS_BUF + 6144))
-#define NAME_BUF        ((unsigned char *)(FSYS_BUF + 8192))
-
-static int
-iso9660_devread (int sector, int byte_offset, int byte_len, char *buf)
-{
-  /* FILO uses 512-byte "soft" sector, and ISO-9660 uses 2048-byte
-   * CD-ROM sector */
-  return devread(sector<<2, byte_offset, byte_len, buf);
-}
-
-int
-iso9660_mount (void)
-{
-  unsigned int sector;
-
-  /*
-   *  Because there is no defined slice type ID for ISO-9660 filesystem,
-   *  this test will pass only either (1) if entire disk is used, or
-   *  (2) if current partition is BSD style sub-partition whose ID is
-   *  ISO-9660.
-   */
-  /*if ((current_partition != 0xFFFFFF)
-      && !IS_PC_SLICE_TYPE_BSD_WITH_FS(current_slice, FS_ISO9660))
-    return 0;*/
-
-  /*
-   *  Currently, only FIRST session of MultiSession disks are supported !!!
-   */
-  for (sector = 16 ; sector < 32 ; sector++)
-    {
-      if (!iso9660_devread(sector, 0, sizeof(*PRIMDESC), (char *)PRIMDESC)) 
-	break;
-      /* check ISO_VD_PRIMARY and ISO_STANDARD_ID */
-      if (isonum_711(PRIMDESC->type) == ISO_VD_PRIMARY &&
-		!__builtin_memcmp(PRIMDESC->id, "CD001", 5))
-	{
-	  ISO_SUPER->vol_sector = sector;
-	  ISO_SUPER->file_start = 0;
-	  fsmax = isonum_733(PRIMDESC->volume_space_size);
-	  return 1;
-	}
-    }
-
-  return 0;
-}
-
-int
-iso9660_dir (char *dirname)
-{
-  struct iso_directory_record *idr;
-  RR_ptr_t rr_ptr;
-  struct rock_ridge *ce_ptr;
-  unsigned int pathlen;
-  int size;
-  unsigned int extent;
-  unsigned int rr_len;
-  unsigned char file_type;
-  unsigned char rr_flag;
-
-  idr = (struct iso_directory_record *)&PRIMDESC->root_directory_record;
-  ISO_SUPER->file_start = 0;
-
-  do
-  {
-      while (*dirname == '/')	/* skip leading slashes */
-	  dirname++;
-      /* pathlen = strcspn(dirname, "/\n\t "); */
-      for (pathlen = 0 ;
-	  dirname[pathlen]
-	     && !isspace(dirname[pathlen]) && dirname[pathlen] != '/' ;
-	  pathlen++)
-	;
-
-      size = isonum_733(idr->size);
-      extent = isonum_733(idr->extent);
-
-      while (size > 0)
-      {
-	  if (!iso9660_devread(extent, 0, ISO_SECTOR_SIZE, (char *)DIRREC))
-	  {
-	      errnum = ERR_FSYS_CORRUPT;
-	      return 0;
-	  }
-	  extent++;
-
-	  idr = (struct iso_directory_record *)DIRREC;
-	  for (; isonum_711(idr->length) > 0;
-		 idr = (struct iso_directory_record *)((char *)idr + isonum_711(idr->length)) )
-	  {
-	      const char *name = idr->name;
-	      unsigned int name_len = isonum_711(idr->name_len);
-
-	      file_type = (isonum_711(idr->flags) & 2) ? ISO_DIRECTORY : ISO_REGULAR;
-	      if (name_len == 1)
-	      {
-		  if ((name[0] == 0) ||	/* self */
-		      (name[0] == 1)) 	/* parent */
-		    continue;
-	      }
-	      if (name_len > 2 && 
-			name[name_len - 2] == ';' &&
-			name[name_len - 1] == '1')
-	      {
-		  name_len -= 2;	/* truncate trailing file version */
-		  if (name_len > 1 && name[name_len - 1] == '.')
-		    name_len--;		/* truncate trailing dot */
-	      }
-
-	      /*
-	       *  Parse Rock-Ridge extension
-	       */
-	      rr_len = (isonum_711(idr->length) - isonum_711(idr->name_len)
-			- sizeof(struct iso_directory_record)
-			+ sizeof(idr->name));
-	      rr_ptr.ptr = ((unsigned char *)idr + isonum_711(idr->name_len)
-			    + sizeof(struct iso_directory_record)
-			    - sizeof(idr->name));
-	      if (rr_ptr.i & 1)
-		rr_ptr.i++, rr_len--;
-	      ce_ptr = 0;
-	      rr_flag = RR_FLAG_NM | RR_FLAG_PX;
-
-	      while (rr_len >= 4)
-	      {
-		  if (rr_ptr.rr->version != 1)
-		  {
-#ifndef STAGE1_5
-		    if (debug)
-		      printk_debug(
-			    "Non-supported version (%d) RockRidge chunk "
-			    "`%c%c'\n", rr_ptr.rr->version,
-			    rr_ptr.rr->signature[0],
-			    rr_ptr.rr->signature[1]);
-#endif
-		    break;
-		  }
-		  else if (rr_ptr.rr->signature[0] == 'R'
-			   && rr_ptr.rr->signature[1] == 'R'
-			   && rr_ptr.rr->len >= 5)
-		    rr_flag &= isonum_711(rr_ptr.rr->u.RR.flags);
-		  else if (rr_ptr.rr->signature[0] == 'N'
-			   && rr_ptr.rr->signature[1] == 'M')
-		  {
-		      name = rr_ptr.rr->u.NM.name;
-		      name_len = rr_ptr.rr->len - 5;
-		      rr_flag &= ~RR_FLAG_NM;
-		  }
-		  else if (rr_ptr.rr->signature[0] == 'P'
-			   && rr_ptr.rr->signature[1] == 'X'
-			   && rr_ptr.rr->len >= 36)
-		  {
-		      unsigned int mode = isonum_733(rr_ptr.rr->u.PX.mode);
-		      file_type = ((mode & POSIX_S_IFMT)
-				   == POSIX_S_IFREG
-				   ? ISO_REGULAR
-				   : ((mode & POSIX_S_IFMT)
-				      == POSIX_S_IFDIR
-				      ? ISO_DIRECTORY : ISO_OTHER));
-		      rr_flag &= ~RR_FLAG_PX;
-		  }
-		  else if (rr_ptr.rr->signature[0] == 'C'
-			   && rr_ptr.rr->signature[1] == 'E'
-			   && rr_ptr.rr->len >= 28)
-		    ce_ptr = rr_ptr.rr;
-		  if (!rr_flag)
-		    /*
-		     * There is no more extension we expects...
-		     */
-		    break;
-		  rr_len -= rr_ptr.rr->len;
-		  rr_ptr.ptr += rr_ptr.rr->len;
-		  if (rr_len < 4 && ce_ptr != 0)
-		  {
-		      /* preserve name before loading new extent. */
-		      if( RRCONT_BUF <= (unsigned char *)name
-			  && (unsigned char *)name < RRCONT_BUF + ISO_SECTOR_SIZE )
-		      {
-			  memcpy(NAME_BUF, name, name_len);
-			  name = NAME_BUF;
-		      }
-		      rr_ptr.ptr = RRCONT_BUF + isonum_733(ce_ptr->u.CE.offset);
-		      rr_len = isonum_733(ce_ptr->u.CE.size);
-		      if (!iso9660_devread(isonum_733(ce_ptr->u.CE.extent), 0, ISO_SECTOR_SIZE, RRCONT_BUF))
-		      {
-			  errnum = 0;	/* this is not fatal. */
-			  break;
-		      }
-		      ce_ptr = 0;
-		   }
-	      } /* rr_len >= 4 */
-
-	      filemax = MAXINT;
-	      if (name_len >= pathlen
-		  && !__builtin_memcmp(name, dirname, pathlen))
-	      {
-                if (dirname[pathlen] == '/' || !print_possibilities)
-		{
-		  /*
-		   *  DIRNAME is directory component of pathname,
-		   *  or we are to open a file.
-		   */
-		  if (pathlen == name_len)
-		  {
-		      if (dirname[pathlen] == '/')
-		      {
-		          if (file_type != ISO_DIRECTORY)
-		          {
-			      errnum = ERR_BAD_FILETYPE;
-			      return 0;
-			  }
-                          goto next_dir_level;
-		      }
-		      if (file_type != ISO_REGULAR)
-		      {
-		          errnum = ERR_BAD_FILETYPE;
-		          return 0;
-		      }
-		      ISO_SUPER->file_start = isonum_733(idr->extent);
-		      filepos = 0;
-		      filemax = isonum_733(idr->size);
-		      return 1;
-		  }
-		}
-	        else	/* Completion */
-	        {
-#ifndef STAGE1_5
- 		  if (print_possibilities > 0)
-		      print_possibilities = -print_possibilities;
-		  memcpy(NAME_BUF, name, name_len);
-		  NAME_BUF[name_len] = '\0';
-            	  print_a_completion (NAME_BUF);
-#endif
-	        }
-	      }
-	  } /* for */
-
-	  size -= ISO_SECTOR_SIZE;
-      } /* size>0 */
-
-      if (dirname[pathlen] == '/' || print_possibilities >= 0)
-      {
-	  errnum = ERR_FILE_NOT_FOUND;
-	  return 0;
-      }
-
-next_dir_level:
-      dirname += pathlen;
-
-  } while (*dirname == '/');
-
-  return 1;
-}
-
-int
-iso9660_read (char *buf, int len)
-{
-  int sector, blkoffset, size, ret;
-
-  if (ISO_SUPER->file_start == 0)
-    return 0;
-
-  ret = 0;
-  blkoffset = filepos & (ISO_SECTOR_SIZE - 1);
-  sector = filepos >> ISO_SECTOR_BITS;
-  while (len > 0)
-  {
-    size = ISO_SECTOR_SIZE - blkoffset;
-    if (size > len)
-        size = len;
-
-    disk_read_func = disk_read_hook;
-
-    if (!iso9660_devread(ISO_SUPER->file_start + sector, blkoffset, size, buf))
-	return 0;
-
-    disk_read_func = 0;
-
-    len -= size;
-    buf += size;
-    ret += size;
-    filepos += size;
-    sector++;
-    blkoffset = 0;
-  }
-
-  return ret;
-}
diff --git a/src/stream/fs/vfs.c b/src/stream/fs/vfs.c
deleted file mode 100644
index 4a298ce..0000000
--- a/src/stream/fs/vfs.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* Interface between GRUB's fs drivers and application code */
-
-#include <console/console.h>
-#include <fs/fs.h>
-#include <string.h>
-#include <stdlib.h>
-
-int filepos;
-int filemax;
-fs_error_t errnum;
-void (*disk_read_hook) (int, int, int);
-void (*disk_read_func) (int, int, int);
-char FSYS_BUF[FSYS_BUFLEN];
-int fsmax;
-
-struct fsys_entry {
-    char *name;
-    int (*mount_func) (void);
-    int (*read_func) (char *buf, int len);
-    int (*dir_func) (char *dirname);
-    void (*close_func) (void);
-    int (*embed_func) (int *start_sector, int needed_sectors);
-};
-
-struct fsys_entry fsys_table[] = {
-# if CONFIG_FS_FAT == 1
-    {"fat", fat_mount, fat_read, fat_dir, 0, 0},
-# endif
-# if CONFIG_FS_EXT2 == 1
-    {"ext2fs", ext2fs_mount, ext2fs_read, ext2fs_dir, 0, 0},
-# endif
-# if CONFIG_FS_ISO9660 == 1
-    {"iso9660", iso9660_mount, iso9660_read, iso9660_dir, 0, 0},
-# endif
-};
-
-/* NULLFS is used to read images from raw device */
-static int nullfs_dir(char *name)
-{
-    uint64_t dev_size;
-
-    if (name) {
-	printk_debug("can't have a named file\n");
-	return 0;
-    }
-
-    dev_size = (uint64_t) part_length << 9;
-    /* GRUB code doesn't like 2GB or bigger files */
-    if (dev_size > 0x7fffffff)
-	dev_size = 0x7fffffff;
-    filemax = dev_size;
-    return 1;
-}
-
-static int nullfs_read(char *buf, int len)
-{
-    if (devread(filepos>>9, filepos&0x1ff, len, buf)) {
-	filepos += len;
-	return len;
-    } else
-	return 0;
-}
-
-static struct fsys_entry nullfs =
-    {"nullfs", 0, nullfs_read, nullfs_dir, 0, 0};
-
-static struct fsys_entry *fsys;
-
-int mount_fs(void)
-{
-    int i;
-
-    for (i = 0; i < ARRAY_SIZE(fsys_table); i++) {
-	if (fsys_table[i].mount_func()) {
-	    fsys = &fsys_table[i];
-	    printk_info("Mounted %s\n", fsys->name);
-	    return 1;
-	}
-    }
-    fsys = 0;
-    printk_info("Unknown filesystem type\n");
-    return 0;
-}
-
-int file_open(const char *filename)
-{
-    char *dev = 0;
-    const char *path;
-    int len;
-    int retval = 0;
-    int reopen;
-
-    path = strchr(filename, ':');
-    if (path) {
-	len = path - filename;
-	path++;
-	dev = malloc(len + 1);
-	memcpy(dev, filename, len);
-	dev[len] = '\0';
-    } else {
-	/* No colon is given. Is this device or filename? */
-	if (filename[0] == '/') {
-	    /* Anything starts with '/' must be a filename */
-	    dev = 0;
-	    path = filename;
-	} else {
-	    dev = strdup(filename);
-	    path = 0;
-	}
-    }
-
-    if (dev && dev[0]) {
-	if (!devopen(dev, &reopen)) {
-	    fsys = 0;
-	    goto out;
-	}
-	if (!reopen)
-	    fsys = 0;
-    }
-
-    if (path) {
-	if (!fsys || fsys==&nullfs) {
-	    if (!mount_fs())
-		goto out;
-	}
-	using_devsize = 0;
-	if (!path[0]) {
-	    printk_info("No filename is given\n");
-	    goto out;
-	}
-    } else
-	fsys = &nullfs;
-
-    filepos = 0;
-    errnum = 0;
-    if (!fsys->dir_func((char *) path)) {
-	printk_info("File not found\n");
-	goto out;
-    }
-    retval = 1;
-out:
-    if (dev)
-	free(dev);
-    return retval;
-}
-
-int file_read(void *buf, unsigned long len)
-{
-    if (filepos < 0 || filepos > filemax)
-	filepos = filemax;
-    if (len < 0 || len > filemax-filepos)
-	len = filemax - filepos;
-    errnum = 0;
-    return fsys->read_func(buf, len);
-}
-
-int file_seek(unsigned long offset)
-{
-    filepos = offset;
-    return filepos;
-}
-
-unsigned long file_pos(void)
-{
-    return filepos;
-}
-
-unsigned long file_size(void)
-{
-    return filemax;
-}
-
-void file_close(void)
-{
-}
-
diff --git a/src/stream/fs_stream.c b/src/stream/fs_stream.c
deleted file mode 100644
index 7d911e6..0000000
--- a/src/stream/fs_stream.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <console/console.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <stream/read_bytes.h>
-#include <string.h>
-#include <fs/fs.h>
-
-char *boot_file;
-
-int stream_init(void)
-{
-	return file_open(boot_file);
-}
-
-
-void stream_fini(void)
-{
-	return;
-}
-
-byte_offset_t stream_skip(byte_offset_t count)
-{
-	unsigned long pos = file_pos();
-	if (file_seek(count+pos) != count+pos)
-		return 0;
-	return count;
-}
-
-byte_offset_t stream_read(void *vdest, byte_offset_t count)
-{
-	return file_read(vdest, count);
-}
diff --git a/src/stream/ide_stream.c b/src/stream/ide_stream.c
deleted file mode 100644
index 8cf5192..0000000
--- a/src/stream/ide_stream.c
+++ /dev/null
@@ -1,98 +0,0 @@
-#include <console/console.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <stream/read_bytes.h>
-#include <delay.h>
-#include <string.h>
-#include <pc80/ide.h>
-
-#ifndef CONFIG_IDE_BOOT_DRIVE
-#define CONFIG_IDE_BOOT_DRIVE 0
-#endif
-
-static unsigned long offset;
-
-int stream_init(void)
-{
-	int i,res;
-
-        printk_debug ("Trying polled ide\n");
-        printk_debug ("Waiting for ide disks to spin up\n");
-        printk_notice ("This is a hard coded delay and longer than necessary.\n");
-	for (i = 0; i < 2; i++) {
-		printk_notice (".");
-		delay(1);
-	}
-	printk_info ("\n");
-
-#ifdef ONE_TRACK
-	offset = (ONE_TRACK*512);
-#elif defined(CONFIG_IDE_OFFSET)
-	offset = CONFIG_IDE_OFFSET;
-#else
-	offset = 0x7e00;
-#endif
-	res = ide_probe(CONFIG_IDE_BOOT_DRIVE);
-	delay(1);
-	return res;
-}
-
-void stream_fini(void)
-{
-	return;
-}
-
-static unsigned char buffer[512];
-static unsigned int block_num = 0;
-static unsigned int first_fill = 1;
-
-static byte_offset_t stream_ide_read(void *vdest, byte_offset_t offs, byte_offset_t count)
-{
-	byte_offset_t bytes = 0;
-	unsigned char *dest = vdest;
-
-	//printk_debug("stream_ide_read count = %x\n", count);
-	while (bytes < count) {
-		unsigned int byte_offset, len;
-
-		/* The block is not cached in memory or frist time called */
-		if (block_num != offs / 512 || first_fill) {
-			block_num  = offs / 512;
-			printk_notice (".");
-			ide_read(CONFIG_IDE_BOOT_DRIVE, block_num, buffer);
-			first_fill = 0;
-		}
-
-		byte_offset = offs % 512;
-		len = 512 - byte_offset;
-		if (len > (count - bytes)) {
-			len = (count - bytes);
-		}
-
-		memcpy(dest, buffer + byte_offset, len);
-
-		offs += len;
-		bytes += len;
-		dest += len;
-
-	}
-	return bytes;
-}
-
-byte_offset_t stream_read(void *vdest, byte_offset_t count)
-{
-	byte_offset_t len;
-
-	len = stream_ide_read(vdest, offset, count);
-	if (len > 0) {
-		offset += len;
-	}
-
-	return len;
-}
-
-byte_offset_t stream_skip(byte_offset_t count)
-{
-	offset += count;
-	return count;
-}
diff --git a/src/stream/rom_stream.c b/src/stream/rom_stream.c
deleted file mode 100644
index 2c8699d..0000000
--- a/src/stream/rom_stream.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <console/console.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <stream/read_bytes.h>
-#include <string.h>
-
-/* if they set the precompressed rom stream, they better have set a type */
-#if CONFIG_PRECOMPRESSED_PAYLOAD && ((!CONFIG_COMPRESSED_PAYLOAD_NRV2B) && (!CONFIG_COMPRESSED_PAYLOAD_LZMA))
-#error "You set CONFIG_PRECOMPRESSED_PAYLOAD but need to set CONFIG_COMPRESSED_PAYLOAD_NRV2B or CONFIG_COMPRESSED_PAYLOAD_LZMA"
-#endif
-
-/* If they set ANY of these, then we're compressed */
-#if ((CONFIG_COMPRESSED_PAYLOAD_NRV2B) || (CONFIG_COMPRESSED_PAYLOAD_LZMA))
-#define UNCOMPRESSER 1
-extern unsigned char _heap, _eheap;
-#endif
-
-#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) 
-#define HAVE_UNCOMPRESSER 1
-#include "../lib/nrv2b.c"
-#endif
-
-#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
-#ifdef HAVE_UNCOMPRESSER
-#error "You're defining more than one compression type, which is not allowed."
-#endif
-#define HAVE_UNCOMPRESSER 1
-unsigned long ulzma(unsigned char *src, unsigned char *dst);
-#endif
-
-#ifndef CONFIG_ROM_PAYLOAD_START
-#define CONFIG_ROM_PAYLOAD_START 0xffff0000UL
-#endif
-
-/* well, this is a mess, and it will get fixed, but not right away.
- * until we stop using 'ld' for building the rom image, that is.
- * problem is, that on the sc520, ROM_PAYLOAD_START has to be at 0x2000000.
- * but if you set CONFIG_ROM_PAYLOAD_START to that, then ld will try to
- * build a giant image: 0x0-0x2000000, i.e. almost 4 GB.
- * so make this non-static, non-const for now.
- */
-
-/*XXXXXXXXXXXXXX */
-unsigned char *rom_start = (unsigned char *)CONFIG_ROM_PAYLOAD_START;
-unsigned char *rom_end   = (unsigned char *)(CONFIG_ROM_PAYLOAD_START + CONFIG_PAYLOAD_SIZE - 1);
-/*XXXXXXXXXXXXXX */
-
-static const unsigned char *rom;
-
-#ifdef UNCOMPRESSER
-unsigned long 
-uncompress(uint8_t * start_addr, uint8_t *dest_addr)
-{
-#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) 
-	unsigned long ilen; // used compressed stream length
-	return unrv2b(start_addr, dest_addr, &ilen);
-#endif
-#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
-	return ulzma(start_addr, dest_addr);
-#endif
-}
-#endif
-
-int stream_init(void)
-{
-#ifdef UNCOMPRESSER
-        unsigned char *dest;
-        unsigned long olen;
-#endif
-
-	printk_debug("rom_stream: 0x%08lx - 0x%08lx\n",
-		(unsigned long)rom_start,
-		(unsigned long)rom_end);
-
-#ifdef UNCOMPRESSER
-
-        dest = &_eheap; /* need a good address on RAM */
-
-#if CONFIG_RAMBASE<0x00100000
-	olen = *(unsigned int *)dest;
-#if (CONFIG_CONSOLE_VGA==1) || (CONFIG_PCI_ROM_RUN == 1)
-	if((dest < (unsigned char *)0xa0000) && ((dest+olen)>(unsigned char *)0xa0000)) {
-		dest = (unsigned char *)(CONFIG_LB_MEM_TOPK<<10);
-	}
-#endif
-        if((dest < (unsigned char *) 0xf0000) && ((dest+olen)> (unsigned char *)0xf0000)) { // coreboot tables etc
-	  dest = (unsigned char *) (CONFIG_LB_MEM_TOPK<<10);
-        }
-#endif
-
-	/* ALL of those settings are too smart and also unsafe. Set the dest to 16 MB: 
-	 * known to be safe for LB for now, and mostly safe for all elf images we have tried. 
-	 * long term, this has got to be fixed. 
-	 */
-	dest  = (unsigned char *) (16 * 1024 * 1024);
-        printk_debug("Uncompressing to RAM %p ", dest);
-        olen = uncompress((uint8_t *) rom_start, (uint8_t *)dest );
-	printk_debug(" olen = 0x%08lx done.\n", olen);
-	if (olen != 0) {
-		rom_end = dest + olen - 1;
-		rom = dest;
-	} else {
-		/* Decompression failed, assume payload is uncompressed */
-		printk_debug("Decompression failed. Assuming payload is uncompressed...\n");
-		rom = rom_start;
-	}
-#else
-        rom = rom_start;
-#endif
-
-	return 0;
-}
-
-
-void stream_fini(void)
-{
-	return;
-}
-
-byte_offset_t stream_skip(byte_offset_t count)
-{
-	byte_offset_t bytes;
-	bytes = count;
-	if ((rom + bytes - 1) > rom_end) {
-		printk_warning("%6d:%s() - overflowed source buffer\n",
-			__LINE__, __func__);
-		bytes = 0;
-		if (rom <= rom_end) {
-			bytes = (rom_end - rom) + 1;
-		}
-	}
-	rom += bytes;
-	return bytes;
-}
-
-byte_offset_t stream_read(void *vdest, byte_offset_t count)
-{
-	unsigned char *dest = vdest;
-	const unsigned char *src = rom;
-	byte_offset_t bytes;
-
-	bytes = stream_skip(count);
-	memcpy(dest, src, bytes);
-	return bytes;
-}
diff --git a/src/stream/serial_stream.c b/src/stream/serial_stream.c
deleted file mode 100644
index 078727b..0000000
--- a/src/stream/serial_stream.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <console/console.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <stream/read_bytes.h>
-#include <string.h>
-
-/* if they set the precompressed rom stream, they better have set a type */
-#if CONFIG_PRECOMPRESSED_PAYLOAD && ((!CONFIG_COMPRESSED_PAYLOAD_NRV2B) && (!CONFIG_COMPRESSED_PAYLOAD_LZMA))
-#error "You set CONFIG_PRECOMPRESSED_PAYLOAD but need to set CONFIG_COMPRESSED_PAYLOAD_NRV2B or CONFIG_COMPRESSED_PAYLOAD_LZMA"
-#endif
-
-#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) 
-#define HAVE_UNCOMPRESSER 1
-#include "../lib/nrv2b.c"
-#endif
-
-#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
-#if HAVE_UNCOMPRESSER
-#error "You're defining more than one compression type, which is not allowed (of course)"
-#endif
-#define HAVE_UNCOMPRESSER 1
-unsigned long ulzma(unsigned char *src, unsigned char *dst);
-#endif
-
-#include "../lib/xmodem.c"
-
-/* Blocks of RAM for storing stream data */
-static unsigned char *stream_start = (unsigned char *) 0x02000000;
-static unsigned char *stream_end;
-static unsigned char *temp_start = (unsigned char *) 0x03000000;
-static int stream_max_bytes = 0x00800000;
-
-#if HAVE_UNCOMPRESSER
-static unsigned long uncompress(uint8_t *src, uint8_t *dest)
-{
-#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) 
-	unsigned long ilen;
-	return unrv2b(src, dest, &ilen);
-#endif
-#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
-	return ulzma(src, dest);
-#endif
-}
-#endif
-
-int stream_init(void)
-{
-	int len;
-
-	printk_debug("serial_stream: downloading to 0x%08lx; start XMODEM transfer now!\n", temp_start);
-	if ((len = xmodemReceive(temp_start, stream_max_bytes)) <= 0) {
-		printk_debug("\nserial_stream: XMODEM transfer failed\n");
-		return -1;
-	}
-	printk_debug("\nserial_stream: XMODEM transfer complete; %d bytes received\n", len);
-#if HAVE_UNCOMPRESSER
-	printk_debug("serial_stream: uncompressing to 0x%08lx\n", stream_start);
-	len = uncompress((uint8_t *) temp_start, (uint8_t *) stream_start);
-	printk_debug("serial_stream: %d bytes uncompressed\n", len);
-#else
-	printk_debug("serial_stream: copying to 0x%08lx\n", stream_start);
-	memcpy(stream_start, temp_start, len);
-#endif
-	stream_end = stream_start + len - 1;
-	return 0;
-}
-
-void stream_fini(void)
-{
-}
-
-byte_offset_t stream_skip(byte_offset_t count)
-{
-	if ((stream_start + count) > stream_end) {
-		printk_warning("%6d:%s() - overflowed source buffer\n",
-			__LINE__, __func__);
-		count = 0;
-		if (stream_start <= stream_end) {
-			count = (stream_end - stream_start) + 1;
-		}
-	}
-	stream_start += count;
-	return count;
-}
-
-byte_offset_t stream_read(void *vdest, byte_offset_t count)
-{
-	unsigned char *old_start = stream_start;
-	count = stream_skip(count);
-	memcpy(vdest, old_start, count);
-	return count;
-}
diff --git a/targets/kontron/986lcd-m/Config.lb b/targets/kontron/986lcd-m/Config.lb
index 8cb6b98..5a4fd47 100644
--- a/targets/kontron/986lcd-m/Config.lb
+++ b/targets/kontron/986lcd-m/Config.lb
@@ -5,7 +5,6 @@
 ## (normal AND fallback images and payloads).
 option CONFIG_ROM_SIZE = 1024 * 1024
 
-option CONFIG_CBFS=1
 option HAVE_HIGH_TABLES=1
 option MAXIMUM_CONSOLE_LOGLEVEL=9
 option DEFAULT_CONSOLE_LOGLEVEL=9
diff --git a/targets/lippert/roadrunner-lx/Config.lb b/targets/lippert/roadrunner-lx/Config.lb
index 92b825c..1fb1bbb 100644
--- a/targets/lippert/roadrunner-lx/Config.lb
+++ b/targets/lippert/roadrunner-lx/Config.lb
@@ -30,14 +30,6 @@
 option CONFIG_COMPRESSED_PAYLOAD_NRV2B = 0
 option CONFIG_COMPRESSED_PAYLOAD_LZMA = 0
 
-## Load payload (e.g. Linux) from IDE.
-#option CONFIG_ROM_PAYLOAD = 0
-#option CONFIG_IDE = 1
-#option CONFIG_FS_PAYLOAD = 1
-#option CONFIG_FS_EXT2 = 1
-#option CONFIG_AUTOBOOT_DELAY = 0
-#option CONFIG_AUTOBOOT_CMDLINE = "hda1:/payload.elf"
-
 # Leave 36k for VSA. Usually board is equipped with a 512 KB FWH (LPC) flash,
 # however it can be replaced with a 1 MB chip.
 option CONFIG_ROM_SIZE = (512 * 1024) - (36 * 1024)
diff --git a/targets/lippert/spacerunner-lx/Config.lb b/targets/lippert/spacerunner-lx/Config.lb
index 6719c21..9fa4b5a 100644
--- a/targets/lippert/spacerunner-lx/Config.lb
+++ b/targets/lippert/spacerunner-lx/Config.lb
@@ -31,14 +31,6 @@
 option CONFIG_COMPRESSED_PAYLOAD_NRV2B = 0
 option CONFIG_COMPRESSED_PAYLOAD_LZMA = 0
 
-## Load payload (e.g. Linux) from IDE.
-#option CONFIG_ROM_PAYLOAD = 0
-#option CONFIG_IDE = 1
-#option CONFIG_FS_PAYLOAD = 1
-#option CONFIG_FS_EXT2 = 1
-#option CONFIG_AUTOBOOT_DELAY = 0
-#option CONFIG_AUTOBOOT_CMDLINE = "hda1:/payload.elf"
-
 # Leave 36k for VSA. Board is equipped with a 1 MB SPI flash, however, due to
 # limitations of the IT8712F Super I/O, only the top 512 KB are directly mapped.
 option CONFIG_ROM_SIZE = (512 * 1024) - (36 * 1024)
diff --git a/util/abuild/abuild b/util/abuild/abuild
index 9a90f6f..00329be 100755
--- a/util/abuild/abuild
+++ b/util/abuild/abuild
@@ -176,20 +176,12 @@
 			cat <<EOF
 romimage "normal"
 	option CONFIG_USE_FALLBACK_IMAGE=0
-if CONFIG_CBFS
-else
-	option CONFIG_ROM_IMAGE_SIZE=0x17000
-end
 	option COREBOOT_EXTRA_VERSION=".0-normal"
 	payload __PAYLOAD__
 end
 
 romimage "fallback" 
 	option CONFIG_USE_FALLBACK_IMAGE=1
-if CONFIG_CBFS
-else
-	option CONFIG_ROM_IMAGE_SIZE=0x17000
-end
 	option COREBOOT_EXTRA_VERSION=".0-fallback"
 	payload __PAYLOAD__
 end
diff --git a/util/newconfig/config.g b/util/newconfig/config.g
index 2f5dddf..2fba72b 100644
--- a/util/newconfig/config.g
+++ b/util/newconfig/config.g
@@ -2247,7 +2247,7 @@
 	file = safe_open(makefilepath, 'w+')
 	writemakefileheader(file, makefilepath)
 
-	# Hack to get the necessary settings (CONFIG_CBFS):
+	# Hack to get the necessary settings (CONFIG_COMPRESSED_PAYLOAD_LZMA):
 	file.write("include %s/Makefile.settings\n\n" % romimages.keys()[0])
 
 	# main rule
@@ -2275,7 +2275,6 @@
 	file.write("base-clean:\n")
 	file.write("\trm -f romcc*\n\n")
 
-	file.write("ifeq \"$(CONFIG_CBFS)\" \"1\"\n\n")
 	file.write("CBFS_COMPRESS_FLAG:=\n")
 	file.write("CBFS_STAGE_COMPRESS_FLAG:=\n")
 	file.write("ifeq \"$(CONFIG_COMPRESSED_PAYLOAD_LZMA)\" \"1\"\nCBFS_COMPRESS_FLAG:=l\nendif\n\n")
@@ -2309,19 +2308,6 @@
 			file.write("\tif [ -f %s/coreboot_apc ]; then ./cbfs/cbfstool %s add-stage %s/coreboot_apc %s/coreboot_apc $(CBFS_COMPRESS_FLAG); fi\n" % (j, i.name, j, j,))
 		file.write("\t./cbfs/cbfstool %s print\n" % i.name)
 		file.write("\n")
-	file.write("else\n\n")
-
-	for i in buildroms:
-		file.write("%s:" % i.name)
-		for j in i.roms:
-			file.write(" %s/coreboot.rom " % j)
-		file.write("\n")
-		file.write("\t cat ")
-		for j in i.roms:
-			file.write(" %s/coreboot.rom " % j)
-		file.write("> %s\n\n" %i.name)
-
-	file.write("endif\n\n")
 
 	file.write(".PHONY: all clean cbfstool")
 	for i in romimages.keys():