config SOC_INTEL_BROADWELL
	bool
	help
	  Intel Broadwell and Haswell ULT support.

if SOC_INTEL_BROADWELL

config CPU_SPECIFIC_OPTIONS
	def_bool y
	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
	select ARCH_BOOTBLOCK_X86_32
	select ARCH_VERSTAGE_X86_32
	select ARCH_ROMSTAGE_X86_32
	select ARCH_RAMSTAGE_X86_32
	select BOOT_DEVICE_SUPPORTS_WRITES
	select CACHE_MRC_SETTINGS
	select MRC_SETTINGS_PROTECT
	select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM if RELOCATABLE_RAMSTAGE
	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
	select SUPPORT_CPU_UCODE_IN_CBFS
	select HAVE_MONOTONIC_TIMER
	select HAVE_SMI_HANDLER
	select HAVE_HARD_RESET
	select HAVE_USBDEBUG
	select IOAPIC
	select RELOCATABLE_MODULES
	select RELOCATABLE_RAMSTAGE
	select REG_SCRIPT
	select PARALLEL_MP
	select PCIEXP_ASPM
	select PCIEXP_COMMON_CLOCK
	select PCIEXP_CLK_PM
	select PCIEXP_L1_SUB_STATE
	select RTC
	select SMM_TSEG
	select SMP
	select SPI_FLASH
	select SSE2
	select SUPPORT_CPU_UCODE_IN_CBFS
	select TSC_CONSTANT_RATE
	select TSC_SYNC_MFENCE
	select UDELAY_TSC
	select SOC_INTEL_COMMON
	select HAVE_INTEL_FIRMWARE
	select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
	select HAVE_SPI_CONSOLE_SUPPORT
	select CPU_INTEL_COMMON

config BOOTBLOCK_CPU_INIT
	string
	default "soc/intel/broadwell/bootblock/cpu.c"

config BOOTBLOCK_NORTHBRIDGE_INIT
	string
	default "soc/intel/broadwell/bootblock/systemagent.c"

config BOOTBLOCK_SOUTHBRIDGE_INIT
	string
	default "soc/intel/broadwell/bootblock/pch.c"

config MMCONF_BASE_ADDRESS
	hex
	default 0xf0000000

config SERIAL_CPU_INIT
	bool
	default n

config SMM_TSEG_SIZE
	hex
	default 0x800000

config IED_REGION_SIZE
	hex
	default 0x400000

config SMM_RESERVED_SIZE
	hex
	default 0x100000

config VGA_BIOS_ID
	string
	default "8086,0406"

config CACHE_MRC_SIZE_KB
	int
	default 512

config DCACHE_RAM_BASE
	hex
	default 0xff7c0000

config DCACHE_RAM_SIZE
	hex
	default 0x10000
	help
	  The size of the cache-as-ram region required during bootblock
	  and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE
	  must add up to a power of 2.

config DCACHE_RAM_MRC_VAR_SIZE
	hex
	default 0x30000
	help
	  The amount of cache-as-ram region required by the reference code.

config HAVE_MRC
	bool "Add a Memory Reference Code binary"
	help
	  Select this option to add a Memory Reference Code binary to
	  the resulting coreboot image.

	  Note: Without this binary coreboot will not work

if HAVE_MRC

config MRC_FILE
	string "Intel Memory Reference Code path and filename"
	depends on HAVE_MRC
	default "mrc.bin"
	help
	  The filename of the file to use as Memory Reference Code binary.

config MRC_BIN_ADDRESS
	hex
	default 0xfffa0000

config CACHE_MRC_SETTINGS
	bool "Save cached MRC settings"
	default y

endif # HAVE_MRC

config PRE_GRAPHICS_DELAY
	int "Graphics initialization delay in ms"
	default 0
	help
	  On some systems, coreboot boots so fast that connected monitors
	  (mostly TVs) won't be able to wake up fast enough to talk to the
	  VBIOS. On those systems we need to wait for a bit before executing
	  the VBIOS.

config RESET_ON_INVALID_RAMSTAGE_CACHE
	bool "Reset the system on S3 wake when ramstage cache invalid."
	default n
	depends on RELOCATABLE_RAMSTAGE
	help
	  The romstage code caches the loaded ramstage program in SMM space.
	  On S3 wake the romstage will copy over a fresh ramstage that was
	  cached in the SMM space. This option determines the action to take
	  when the ramstage cache is invalid. If selected the system will
	  reset otherwise the ramstage will be reloaded from cbfs.

config INTEL_PCH_UART_CONSOLE
	bool "Use Serial IO UART for console"
	default n
	select DRIVERS_UART_8250MEM

config INTEL_PCH_UART_CONSOLE_NUMBER
	hex "Serial IO UART number to use for console"
	default 0x0
	depends on INTEL_PCH_UART_CONSOLE

config TTYS0_BASE
	hex
	default 0xd6000000
	depends on INTEL_PCH_UART_CONSOLE

config EHCI_BAR
	hex
	default 0xd8000000

config EHCI_DEBUG_OFFSET
	hex
	default 0xa0

config SERIRQ_CONTINUOUS_MODE
	bool
	default y
	help
	  If you set this option to y, the serial IRQ machine will be
	  operated in continuous mode.

config HAVE_REFCODE_BLOB
	depends on ARCH_X86
	bool "An external reference code blob should be put into cbfs."
	default n
	help
	 The reference code blob will be placed into cbfs.

if HAVE_REFCODE_BLOB

config REFCODE_BLOB_FILE
	string "Path and filename to reference code blob."
	default "refcode.elf"
	help
	 The path and filename to the file to be added to cbfs.

endif # HAVE_REFCODE_BLOB

config HAVE_ME_BIN
	def_bool y

config BUILD_WITH_FAKE_IFD
	def_bool !HAVE_IFD_BIN

config CHIPSET_BOOTBLOCK_INCLUDE
	string
	default "soc/intel/broadwell/bootblock/timestamp.inc"

endif