mb/google/dedede/var/kracko: Add P-sensor support
Configure GPIO D22/D23/E11.
Add P-sensor to device tree, these registers are draft version.
BUG=b:178092096
BRANCH=dedede
TEST=built firmware and dmesg shows STH9324 initial success.
Change-Id: I2c8feedd6efc1a471304322a17480c836e22349e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
diff --git a/src/mainboard/google/dedede/variants/kracko/overridetree.cb b/src/mainboard/google/dedede/variants/kracko/overridetree.cb
index 66fb274..3d9307b 100644
--- a/src/mainboard/google/dedede/variants/kracko/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/kracko/overridetree.cb
@@ -136,6 +136,59 @@
device i2c 1a on end
end
end #I2C 4
+ device pci 19.1 on
+ chip drivers/i2c/sx9324
+ register "desc" = ""SAR Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E11_IRQ)"
+ register "uid" = "2"
+ register "reg_gnrl_ctrl0" = "0x0a"
+ register "reg_gnrl_ctrl1" = "0x22"
+ register "reg_afe_ctrl0" = "0x20"
+ register "reg_afe_ctrl3" = "0x01"
+ register "reg_afe_ctrl4" = "0x47"
+ register "reg_afe_ctrl6" = "0x00"
+ register "reg_afe_ctrl7" = "0x47"
+ register "reg_afe_ctrl8" = "0x12"
+ register "reg_afe_ctrl9" = "0x0f"
+ register "reg_afe_ph0" = "0x37"
+ register "reg_afe_ph1" = "0x29"
+ register "reg_afe_ph2" = "0x1f"
+ register "reg_afe_ph3" = "0x3d"
+ register "reg_prox_ctrl0" = "0x0b"
+ register "reg_prox_ctrl1" = "0x0b"
+ register "reg_prox_ctrl2" = "0x20"
+ register "reg_prox_ctrl3" = "0x20"
+ register "reg_prox_ctrl4" = "0x0c"
+ register "reg_prox_ctrl5" = "0x00"
+ register "reg_prox_ctrl6" = "0x2d"
+ register "reg_prox_ctrl7" = "0xc0"
+ register "reg_adv_ctrl0" = "0x00"
+ register "reg_adv_ctrl1" = "0x00"
+ register "reg_adv_ctrl2" = "0x00"
+ register "reg_adv_ctrl3" = "0x00"
+ register "reg_adv_ctrl4" = "0x00"
+ register "reg_adv_ctrl5" = "0x05"
+ register "reg_adv_ctrl6" = "0x00"
+ register "reg_adv_ctrl7" = "0x00"
+ register "reg_adv_ctrl8" = "0x00"
+ register "reg_adv_ctrl9" = "0x00"
+ register "reg_adv_ctrl10" = "0x00"
+ register "reg_adv_ctrl11" = "0x00"
+ register "reg_adv_ctrl12" = "0x00"
+ register "reg_adv_ctrl13" = "0x00"
+ register "reg_adv_ctrl14" = "0x80"
+ register "reg_adv_ctrl15" = "0x0c"
+ register "reg_adv_ctrl16" = "0x04"
+ register "reg_adv_ctrl17" = "0x70"
+ register "reg_adv_ctrl18" = "0x40"
+ register "reg_adv_ctrl19" = "0x00"
+ register "reg_adv_ctrl20" = "0x00"
+ register "reg_irq_cfg0" = "0x00"
+ register "reg_irq_cfg1" = "0x80"
+ register "reg_irq_cfg2" = "0x00"
+ device i2c 28 on end
+ end
+ end # I2C 5
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""