/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2012 secunet Security Networks AG
 * Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; version 2 of
 * the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#define __SIMPLE_DEVICE__

#include <cbmem.h>
#include <commonlib/helpers.h>
#include <stdint.h>
#include <arch/cpu.h>
#include <arch/io.h>
#include <device/pci_def.h>
#include <console/console.h>
#include <cpu/intel/romstage.h>
#include <cpu/x86/mtrr.h>
#include <northbridge/intel/x4x/x4x.h>
#include <program_loading.h>

/** Decodes used Graphics Mode Select (GMS) to kilobytes. */
u32 decode_igd_memory_size(const u32 gms)
{
	static const u16 ggc2uma[] = { 0, 1, 4, 8, 16,
			32, 48, 64, 128, 256, 96, 160, 224, 352 };

	if (gms > ARRAY_SIZE(ggc2uma))
		die("Bad Graphics Mode Select (GMS) setting.\n");

	return ggc2uma[gms] << 10;
}

/** Decodes used GTT Graphics Memory Size (GGMS) to kilobytes. */
u32 decode_igd_gtt_size(const u32 gsm)
{
	static const u8 ggc2gtt[] = { 0, 1, 0, 2, 0, 0, 0, 0, 0, 2, 3, 4};

	if (gsm > ARRAY_SIZE(ggc2gtt))
		die("Bad GTT Graphics Memory Size (GGMS) setting.\n");

	return ggc2gtt[gsm] << 10;
}

u8 decode_pciebar(u32 *const base, u32 *const len)
{
	*base = 0;
	*len = 0;
	const pci_devfn_t dev = PCI_DEV(0, 0, 0);
	u32 pciexbar = 0;
	u32 pciexbar_reg;
	u32 reg32;
	int max_buses;
	const struct {
		u16 num_buses;
		u32 addr_mask;
	} busmask[] = {
		{256, 0xf0000000},
		{128, 0xf8000000},
		{64,  0xfc000000},
		{0,   0},
	};

	pciexbar_reg = pci_read_config32(dev, D0F0_PCIEXBAR_LO);

	if (!(pciexbar_reg & 1)) {
		printk(BIOS_WARNING, "WARNING: MMCONF not set\n");
		return 0;
	}

	reg32 = (pciexbar_reg >> 1) & 3;
	pciexbar = pciexbar_reg & busmask[reg32].addr_mask;
	max_buses = busmask[reg32].num_buses;

	if (!pciexbar) {
		printk(BIOS_WARNING, "WARNING: pciexbar invalid\n");
		return 0;
	}

	*base = pciexbar;
	*len = max_buses << 20;
	return 1;
}

/* Depending of UMA and TSEG configuration, TSEG might start at any
 * 1 MiB alignment. As this may cause very greedy MTRR setup, push
 * CBMEM top downwards to 4 MiB boundary.
 */
void *cbmem_top(void)
{
	uintptr_t top_of_ram = pci_read_config32(PCI_DEV(0, 0, 0), D0F0_TSEG);
	top_of_ram = ALIGN_DOWN(top_of_ram, 4*MiB);
	return (void *) top_of_ram;
}

#define ROMSTAGE_RAM_STACK_SIZE 0x5000

/* platform_enter_postcar() determines the stack to use after
 * cache-as-ram is torn down as well as the MTRR settings to use,
 * and continues execution in postcar stage. */
void platform_enter_postcar(void)
{
	struct postcar_frame pcf;
	uintptr_t top_of_ram;

	if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE))
		die("Unable to initialize postcar frame.\n");

	/* Cache the ROM as WP just below 4GiB. */
	postcar_frame_add_romcache(&pcf, MTRR_TYPE_WRPROT);

	/* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */
	postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK);

	/* Cache two separate 4 MiB regions below the top of ram, this
	 * satisfies MTRR alignment requirements. If you modify this to
	 * cover TSEG, make sure UMA region is not set with WRBACK as it
	 * causes hard-to-recover boot failures.
	 */
	top_of_ram = (uintptr_t)cbmem_top();
	postcar_frame_add_mtrr(&pcf, top_of_ram - 4*MiB, 4*MiB, MTRR_TYPE_WRBACK);
	postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 4*MiB, MTRR_TYPE_WRBACK);

	run_postcar_phase(&pcf);

	/* We do not return here. */
}