{sb,soc}/intel: Use `get_int_option` function
Change-Id: I05f724785880089a513319d70dfd70fc2a6b7679
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c
index ee416c1..4ba8863 100644
--- a/src/southbridge/intel/bd82x6x/lpc.c
+++ b/src/southbridge/intel/bd82x6x/lpc.c
@@ -162,16 +162,14 @@
/* Get the chip configuration */
config_t *config = dev->chip_info;
- int pwr_on = CONFIG_MAINBOARD_POWER_FAILURE_STATE;
- int nmi_option;
-
/* Which state do we want to goto after g3 (power restored)?
* 0 == S0 Full On
* 1 == S5 Soft Off
*
* If the option is not existent (Laptops), use Kconfig setting.
*/
- get_option(&pwr_on, "power_on_after_fail");
+ const int pwr_on = get_int_option("power_on_after_fail",
+ CONFIG_MAINBOARD_POWER_FAILURE_STATE);
reg16 = pci_read_config16(dev, GEN_PMCON_3);
reg16 &= 0xfffe;
@@ -212,8 +210,7 @@
outb(reg8, 0x61);
reg8 = inb(0x70);
- nmi_option = NMI_OFF;
- get_option(&nmi_option, "nmi");
+ const int nmi_option = get_int_option("nmi", NMI_OFF);
if (nmi_option) {
printk(BIOS_INFO, "NMI sources enabled.\n");
reg8 &= ~(1 << 7); /* Set NMI. */