soc/intel/skylake: Fix common timer frequency
The calculation to set up the PM timer emulation is using an
incorrect common timer clock value that was copied from Apollolake.
According to the PDG Skylake and Kabylake clocks are derived from a
24MHz XTAL, not 19.2MHz like Apollolake.
Fixing this value results in the proper "correction value" to be
programmed into the PM timer emulation MSR that matches the raw value
that would be programmed by FSP. (if it were doing MpInit)
Old PM timer correction value: 0x2fba2e25
New PM timer correction value: 0x262e8b51
Signed-off-by: Duncan Laurie <firstname.lastname@example.org>
Reviewed-by: Aaron Durbin <email@example.com>
Reviewed-by: Subrata Banik <firstname.lastname@example.org>
Reviewed-by: Furquan Shaikh <email@example.com>
Tested-by: build bot (Jenkins) <firstname.lastname@example.org>
1 file changed