azalia: Make `set_bits` function non-static

There's many copies of this function in the tree. Make the copy in
azalia_device.c non-static and rename it to `azalia_set_bits`, then
replace all other copies with it. Since azalia_device.c is only built
when AZALIA_PLUGIN_SUPPORT is selected, select it where necessary.

This has the side-effect of building hda_verb.c from the mainboard
directory. If this patch happens to break audio on a mainboard, it's
because its hda_verb.c was always wrong but wasn't being compiled.

Change-Id: Iff3520131ec7bc8554612969e3a2fe9cdbc9305e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c
index 972b253..5e810c4 100644
--- a/src/southbridge/intel/bd82x6x/azalia.c
+++ b/src/southbridge/intel/bd82x6x/azalia.c
@@ -14,39 +14,12 @@
 
 typedef struct southbridge_intel_bd82x6x_config config_t;
 
-static int set_bits(void *port, u32 mask, u32 val)
-{
-	u32 reg32;
-	int count;
-
-	/* Write (val & mask) to port */
-	val &= mask;
-	reg32 = read32(port);
-	reg32 &= ~mask;
-	reg32 |= val;
-	write32(port, reg32);
-
-	/* Wait for readback of register to match what was just written to it */
-	count = 50;
-	do {
-		/* Wait 1ms based on BKDG wait time */
-		mdelay(1);
-		reg32 = read32(port);
-		reg32 &= mask;
-	} while ((reg32 != val) && --count);
-
-	/* Timeout occurred */
-	if (!count)
-		return -1;
-	return 0;
-}
-
 static int codec_detect(u8 *base)
 {
 	u8 reg8;
 
 	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
-	if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
+	if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
 		goto no_codec;
 
 	/* Write back the value once reset bit is set. */
@@ -63,7 +36,7 @@
 no_codec:
 	/* Codec Not found */
 	/* Put HDA back in reset (BAR + 0x8) [0] */
-	set_bits(base + HDA_GCTL_REG, 1, 0);
+	azalia_set_bits(base + HDA_GCTL_REG, 1, 0);
 	printk(BIOS_DEBUG, "Azalia: No codec!\n");
 	return 0;
 }