commit | c194f75bb56e4affab7e056c61b5ee33839fe685 | [log] [tgz] |
---|---|---|
author | Felix Held <felix-coreboot@felixheld.de> | Tue Nov 23 10:12:56 2021 +0100 |
committer | Felix Held <felix-coreboot@felixheld.de> | Thu Nov 25 11:07:07 2021 +0000 |
tree | fbaa47bbf92611e9566b7b8342f8eadd4ef8eb52 | |
parent | 0e9a616c2935bf5a8559a8ddf2356e940b62a8e9 [diff] |
soc/amd/common/block/include/gpio_defs: drop 8k pullup define The corresponding bit is marked as reserved in the following versions of the documentation for all SoCs using this code: Mullins: BKDG #52740 Rev 3.05 Stoneyridge: BKDG #55072 Rev 3.04 Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18 Raven2: PPR #55772 Rev 3.08 Cezanne: PPR #56569 Rev 3.03 The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as PullUpSel, but this is no longer the case in newer versions. It is unclear if this got de-featured or if it was never present in the silicon. To be consistent with the current documentation, drop this define. This patch also change the definition of GPIO_PULL_MASK to only cover the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a default value of 0 for this bit after reset, so the resulting values in the register aren't expected change. The other PPRs/BKDGs don't specify a reset value for this bit, but it's likely safe to assume that all SoCs that use the new GPIO interface use the same GPIO building block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAIN
Kconfig option if you're feeling lucky (no support in this case).Optional:
make menuconfig
and make nconfig
)Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.