fix a bug in pcibios check.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5502 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S
index 03c6994..724fe02 100644
--- a/src/devices/oprom/x86_asm.S
+++ b/src/devices/oprom/x86_asm.S
@@ -49,8 +49,8 @@
/* Realmode IDT pointer structure. */
.globl __realmode_idt
__realmode_idt = RELOCATED(.)
- .word 1023 /* 16-bit limit */
- .long 0 /* 24-bit base */
+ .word 1023 /* 16 bit limit */
+ .long 0 /* 24 bit base */
.word 0
/* Preserve old stack */
@@ -101,14 +101,14 @@
1:
/* Setup a stack: Put the stack at the end of page zero.
* That way we can easily share it between real and
- * protected, since the 16-bit ESP at segment 0 will
+ * protected, since the 16 bit ESP at segment 0 will
* work for any case. */
mov $0x0, %ax
mov %ax, %ss
movl $0x1000, %eax
movl %eax, %esp
- /* Load our 16 bit idt */
+ /* Load 16 bit IDT */
xor %ax, %ax
mov %ax, %ds
lidt __realmode_idt
@@ -119,9 +119,9 @@
mov %ax, %gs
mov $0x40, %ax
mov %ax, %ds
- mov %cx, %ax // restore ax
/* ************************************ */
+ mov %cx, %ax // restore ax
// TODO this will not work for non-VGA option ROMs
/* run VGA BIOS at 0xc000:0003 */
lcall $0xc000, $0x0003
@@ -201,7 +201,7 @@
1:
/* Setup a stack: Put the stack at the end of page zero.
* That way we can easily share it between real and
- * protected, since the 16-bit ESP at segment 0 will
+ * protected, since the 16 bit ESP at segment 0 will
* work for any case. */
mov $0x0, %ax
mov %ax, %ss
@@ -415,12 +415,12 @@
mov $0x0, %ax
mov %ax, %ss
- /* Restore 16-bit IDT */
+ /* Restore 16 bit IDT */
xor %ax, %ax
mov %ax, %ds
lidt __realmode_idt
- /* Set up our segment registers to segment 0x0000 */
+ /* Set up segment registers to segment 0x0000 */
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
diff --git a/src/devices/oprom/x86_interrupts.c b/src/devices/oprom/x86_interrupts.c
index 95964f8..9015633 100644
--- a/src/devices/oprom/x86_interrupts.c
+++ b/src/devices/oprom/x86_interrupts.c
@@ -58,6 +58,11 @@
return 0;
}
+#define PCI_CONFIG_SPACE_TYPE1 (1 << 0)
+#define PCI_CONFIG_SPACE_TYPE2 (1 << 1)
+#define PCI_SPECIAL_CYCLE_TYPE1 (1 << 4)
+#define PCI_SPECIAL_CYCLE_TYPE2 (1 << 5)
+
int int1a_handler(struct eregs *regs)
{
unsigned short func = (unsigned short)regs->eax;
@@ -74,6 +79,11 @@
switch (func) {
case PCIBIOS_CHECK:
regs->edx = 0x20494350; /* ' ICP' */
+ regs->eax &= 0xffff0000; /* Clear AH / AL */
+ regs->eax |= PCI_CONFIG_SPACE_TYPE1 | PCI_SPECIAL_CYCLE_TYPE1;
+ // last bus in the system. Hard code to 255 for now.
+ // dev_enumerate() does not seem to tell us (publically)
+ regs->ecx = 0xff;
regs->edi = 0x00000000; /* protected mode entry */
retval = 0;
break;
@@ -114,7 +124,7 @@
dev = dev_find_slot(bus, devfn);
if (!dev) {
printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn);
- // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn!
+ // Or are we supposed to return PCIBIOS_NODEV?
regs->eax = PCIBIOS_BADREG;
retval = -1;
return retval;
@@ -164,38 +174,12 @@
{
int res = -1;
- /* This int15 handler is VIA Tech. specific. Other chipsets need other
+ /* This int15 handler is Intel IGD. specific. Other chipsets need other
* handlers. The right way to do this is to move this handler code into
* the mainboard or northbridge code.
+ * TODO: completely move to mainboards / chipsets.
*/
switch (regs->eax & 0xffff) {
- case 0x5f19:
- break;
- case 0x5f18:
- regs->eax = 0x5f;
- // MCLK = 133, 32M frame buffer, 256 M main memory
- regs->ebx = 0x545;
- regs->ecx = 0x060;
- res = 0;
- break;
- case 0x5f00:
- regs->eax = 0x8600;
- break;
- case 0x5f01:
- regs->eax = 0x5f;
- regs->ecx = (regs->ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768
- res = 0;
- break;
- case 0x5f02:
- regs->eax = 0x5f;
- regs->ebx = (regs->ebx & 0xffff0000) | 2;
- regs->ecx = (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only
- regs->edx = (regs->edx & 0xffff0000) | 0; // TV Layout - default
- res = 0;
- break;
- case 0x5f0f:
- regs->eax = 0x860f;
- break;
/* And now Intel IGD code */
#define BOOT_DISPLAY_DEFAULT 0
#define BOOT_DISPLAY_CRT (1 << 0)
@@ -206,7 +190,6 @@
#define BOOT_DISPLAY_TV2 (1 << 5)
#define BOOT_DISPLAY_EFP2 (1 << 6)
#define BOOT_DISPLAY_LCD2 (1 << 7)
-
case 0x5f35:
regs->eax = 0x5f;
regs->ecx = BOOT_DISPLAY_DEFAULT;