remove trailing whitespace
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/364
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c
index 09aa1d7..b570d45 100644
--- a/src/mainboard/siemens/sitemp_g1p1/romstage.c
+++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c
@@ -18,7 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
+
#define RC0 (6<<8)
#define RC1 (7<<8)
@@ -177,7 +177,7 @@
outb(0x0a,0x72);
i = inb(0x73);
i &= ~(1 << 4);
- outb(i,0x73);
+ outb(i,0x73);
for (i = 14; i < 128; i++) {
#if DUMP_CMOS_RAM
@@ -198,7 +198,7 @@
/* Now reboot to run with default cmos. */
outb(0x06, 0xcf9);
for (;;) asm("hlt"); /* Wait for reset! */
- }
+ }
}
// update altcentury
@@ -221,7 +221,7 @@
msr_t msr;
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
+
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
@@ -237,19 +237,19 @@
enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge
sb600_lpc_init();
-#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0)
- check_cmos(); // rebooting in case of corrupted cmos !!!!!
-#endif
+#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0)
+ check_cmos(); // rebooting in case of corrupted cmos !!!!!
+#endif
/* it8712f_enable_serial does not use its 1st parameter. */
it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
- it8712f_kill_watchdog();
+ it8712f_kill_watchdog();
console_init();
#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1)
- check_cmos(); // rebooting in case of corrupted cmos !!!!!
+ check_cmos(); // rebooting in case of corrupted cmos !!!!!
#endif
post_code(0x03);
-
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
__DEBUG__("bsp_apicid=0x%x\n", bsp_apicid);
@@ -270,9 +270,9 @@
/* run _early_setup before soft-reset. */
rs690_early_setup();
sb600_early_setup();
-
+
post_code(0x04);
-
+
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
@@ -293,16 +293,16 @@
} else {
__DEBUG__("Changing FIDVID not supported\n");
}
-
+
post_code(0x05);
-
+
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
rs690_htinit();
__DEBUG__("needs_reset=0x%x\n", needs_reset);
-
+
post_code(0x06);
-
+
if (needs_reset) {
__INFO__("ht reset -\n");
soft_reset();
@@ -314,19 +314,19 @@
__DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
sysinfo->nodes, sysinfo->ctrl, spd_addr);
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
+
post_code(0x07);
-
+
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
+
post_code(0x08);
-
+
rs690_before_pci_init(); // does nothing
sb600_before_pci_init();
-
-#if CONFIG_USE_OPTION_TABLE
+
+#if CONFIG_USE_OPTION_TABLE
if( read_option(cmos_defaults_loaded, 0) )
- __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n");
+ __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n");
#endif
post_cache_as_ram();