remove trailing whitespace
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/364
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c
index 7dcdd96..a72f96b 100644
--- a/src/mainboard/amd/inagua/BiosCallOuts.c
+++ b/src/mainboard/amd/inagua/BiosCallOuts.c
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
+
#include "agesawrapper.h"
#include "amdlib.h"
#include "BiosCallOuts.h"
@@ -58,11 +58,11 @@
{AGESA_GET_IDS_INIT_DATA,
BiosGetIdsInitData
},
-
+
{AGESA_HOOKBEFORE_DQS_TRAINING,
BiosHookBeforeDQSTraining
},
-
+
{AGESA_HOOKBEFORE_DRAM_INIT,
BiosHookBeforeDramInit
},
@@ -210,7 +210,7 @@
/* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
to the end of the allocated nodes list.
*/
-
+
}
/* Find the node that best fits the requested buffer size */
FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
@@ -260,7 +260,7 @@
/* If BestFitNode is the first buffer in the list, then update
StartOfFreedNodes to reflect the new free node
- */
+ */
if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
} else {
@@ -345,10 +345,10 @@
FreedNodePtr->NextNodeOffset = 0;
} else {
- /* Otherwise, add freed node to the start of the list
- Update NextNodeOffset and BufferSize to include the
+ /* Otherwise, add freed node to the start of the list
+ Update NextNodeOffset and BufferSize to include the
size of BIOS_BUFFER_NODE
- */
+ */
AllocNodePtr->NextNodeOffset = FreedNodeOffset;
}
/* Update StartOfFreedNodes to the new first node */
@@ -356,7 +356,7 @@
} else {
/* Traverse list of freed nodes to find where the deallocated node
should be place
- */
+ */
NextNodeOffset = FreedNodeOffset;
NextNodePtr = FreedNodePtr;
while (AllocNodeOffset > NextNodeOffset) {
@@ -370,7 +370,7 @@
/* If deallocated node is adjacent to the next node,
concatenate both nodes
- */
+ */
if (NextNodeOffset == EndNodeOffset) {
NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
@@ -384,7 +384,7 @@
}
/* If deallocated node is adjacent to the previous node,
concatenate both nodes
- */
+ */
PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
if (AllocNodeOffset == EndNodeOffset) {
@@ -448,10 +448,10 @@
UINT8 Value;
UINTN ResetType;
AMD_CONFIG_PARAMS *StdHeader;
-
+
ResetType = Data;
StdHeader = ConfigPtr;
-
+
//
// Perform the RESET based upon the ResetType. In case of
// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
@@ -463,17 +463,17 @@
case WARM_RESET_WHENEVER:
case COLD_RESET_WHENEVER:
break;
-
+
case WARM_RESET_IMMEDIATELY:
case COLD_RESET_IMMEDIATELY:
Value = 0x06;
LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
break;
-
+
default:
break;
}
-
+
Status = 0;
return Status;
}
@@ -506,10 +506,10 @@
UINT8 Data8;
UINT16 Data16;
UINT8 TempData8;
-
+
FcnData = Data;
MemData = ConfigPtr;
-
+
Status = AGESA_SUCCESS;
/* Get SB800 MMIO Base (AcpiMmioAddr) */
WriteIo8 (0xCD6, 0x27);
@@ -520,14 +520,14 @@
Data16 |= Data8;
AcpiMmioAddr = (UINT32)Data16 << 16;
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-
+
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
Data8 &= ~BIT5;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
TempData8 &= 0x03;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
+
Data8 |= BIT2+BIT3;
Data8 &= ~BIT4;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
@@ -546,7 +546,7 @@
TempData8 &= 0x23;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
+
switch(MemData->ParameterListPtr->DDR3Voltage){
case VOLT1_35:
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
@@ -586,12 +586,12 @@
AGESA_STATUS Status;
UINTN FcnData;
PCIe_SLOT_RESET_INFO *ResetInfo;
-
+
UINT32 GpioMmioAddr;
UINT32 AcpiMmioAddr;
UINT8 Data8;
UINT16 Data16;
-
+
FcnData = Data;
ResetInfo = ConfigPtr;
// Get SB800 MMIO Base (AcpiMmioAddr)
@@ -611,13 +611,13 @@
{
case AssertSlotReset:
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6 ;
+ Data8 &= ~(UINT8)BIT6 ;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
Status = AGESA_SUCCESS;
break;
case DeassertSlotReset:
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6 ;
+ Data8 |= BIT6 ;
Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
Status = AGESA_SUCCESS;
break;
@@ -634,7 +634,7 @@
break;
case DeassertSlotReset:
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
+ Data8 |= BIT6 ;
Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
Status = AGESA_SUCCESS;
break;