Whitespace changes to make s2912_fam10/ms9652_fam10 more similar.
Also, fix another typo in the ms9652 board name.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c
index 9680660..f19147f 100644
--- a/src/mainboard/msi/ms9652_fam10/romstage.c
+++ b/src/mainboard/msi/ms9652_fam10/romstage.c
@@ -50,9 +50,9 @@
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
- static void post_code(u8 value) {
- outb(value, 0x80);
- }
+static void post_code(u8 value) {
+ outb(value, 0x80);
+}
#if CONFIG_USE_FAILOVER_IMAGE==0
#include "arch/i386/lib/console.c"
@@ -153,20 +153,17 @@
static void sio_setup(void)
{
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
- unsigned value;
- uint32_t dword;
- uint8_t byte;
+ byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
- byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
-
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
@@ -281,10 +278,10 @@
#endif
val = cpuid_eax(1);
- printk_debug("BSP Family_Model: %08x \n", val);
+ printk_debug("BSP Family_Model: %08x\n", val);
printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
- printk_debug("bsp_apicid = %02x \n", bsp_apicid);
- printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
+ printk_debug("bsp_apicid = %02x\n", bsp_apicid);
+ printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx);
/* Setup sysinfo defaults */
set_sysinfo_in_ram(0);
@@ -300,12 +297,12 @@
/* Setup nodes PCI space and start core 0 AP init. */
finalize_node_setup(sysinfo);
- printk_debug("finalize_node_setup done \n");
+ printk_debug("finalize_node_setup done\n");
/* Setup any mainboard PCI settings etc. */
- printk_debug("setup_mb_resource_map begin \n");
+ printk_debug("setup_mb_resource_map begin\n");
setup_mb_resource_map();
- printk_debug("setup_mb_resource_map end \n");
+ printk_debug("setup_mb_resource_map end\n");
post_code(0x36);
/* wait for all the APs core0 started by finalize_node_setup. */
@@ -329,7 +326,7 @@
#if FAM10_SET_FIDVID == 1
msr = rdmsr(0xc0010071);
- printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
/* FIXME: The sb fid change may survive the warm reset and only
* need to be done once.*/
@@ -347,7 +344,7 @@
/* show final fid and vid */
msr=rdmsr(0xc0010071);
- printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
#endif
wants_reset = mcp55_early_setup_x();