diff --git a/src/include/cpu/amd/lxdef.h b/src/include/cpu/amd/lxdef.h
new file mode 100644
index 0000000..6f04dd9
--- /dev/null
+++ b/src/include/cpu/amd/lxdef.h
@@ -0,0 +1,1136 @@
+#ifndef CPU_AMD_LXDEF_H
+#define CPU_AMD_LXDEF_H
+#define	CPU_ID_1_X							0x540		/* Stepping ID 1.x*/
+#define	CPU_ID_2_0							0x551		/* Stepping ID 2.0*/
+#define	CPU_ID_2_1							0x552		/* Stepping ID 2.1*/
+#define	CPU_ID_2_2							0x553		/* Stepping ID 2.2*/
+
+#define	CPU_REV_1_0							0x011
+#define	CPU_REV_1_1							0x012
+#define	CPU_REV_1_2							0x013
+#define	CPU_REV_1_3							0x014
+#define	CPU_REV_2_0							0x020
+#define	CPU_REV_2_1							0x021
+#define	CPU_REV_2_2							0x022
+#define	CPU_REV_3_0							0x030
+/* GeodeLink Control Processor Registers, GLIU1, Port 3 */
+#define	GLCP_CLK_DIS_DELAY	0x4c000008
+#define	GLCP_PMCLKDISABLE	0x4c000009
+#define	GLCP_CHIP_REVID		0x4c000017
+
+/* GLCP_SYS_RSTPLL, Upper 32 bits */
+#define	GLCP_SYS_RSTPLL_MDIV_SHIFT   9
+#define	GLCP_SYS_RSTPLL_VDIV_SHIFT   6
+#define	GLCP_SYS_RSTPLL_FBDIV_SHIFT  0
+
+/* GLCP_SYS_RSTPLL, Lower 32 bits */
+#define	GLCP_SYS_RSTPLL_SWFLAGS_SHIFT	26
+#define	GLCP_SYS_RSTPLL_SWFLAGS_MASK 	(0x3f << 26)
+
+#define	GLCP_SYS_RSTPLL_LOCKWAIT	24
+#define	GLCP_SYS_RSTPLL_HOLDCOUNT	16
+#define	GLCP_SYS_RSTPLL_BYPASS		15
+#define	GLCP_SYS_RSTPLL_PD		14
+#define	GLCP_SYS_RSTPLL_RESETPLL	13
+#define	GLCP_SYS_RSTPLL_DDRMODE		10
+#define	GLCP_SYS_RSTPLL_VA_SEMI_SYNC_MODE   9
+#define	GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE  8
+#define	GLCP_SYS_RSTPLL_CHIP_RESET	    0
+
+/* MSR routing as follows*/
+/* MSB = 1 means not for CPU*/
+/* next 3 bits 1st port*/
+/* next3 bits next port if through an GLIU*/
+/* etc...*/
+
+/*Redcloud as follows.*/
+/* GLIU0*/
+/*	port0 - GLIU0*/
+/*	port1 - MC*/
+/*	port2 - GLIU1*/
+/*	port3 - CPU*/
+/*	port4 - VG*/
+/*	port5 - GP*/
+/*	port6 - DF*/
+
+/* GLIU1*/
+/*	port1 - GLIU0*/
+/*	port3 - GLCP*/
+/*	port4 - PCI*/
+/*	port5 - FG*/
+
+
+/*          start GX3 def,  differences are marked with GX3 comment      */
+
+#define	GL0_GLIU0			0
+#define	GL0_MC				1
+#define	GL0_GLIU1			2
+#define	GL0_CPU				3
+#define	GL0_VG				4
+#define	GL0_GP				5
+//#define	GL0_DF				6		//GX3 no such thing as VP port
+
+#define	GL1_GLIU0			1
+//GX3 VP port
+#define	GL1_DF				2
+#define	GL1_GLCP			3
+#define	GL1_PCI				4
+#define GL1_VIP				5
+#define GL1_AES				6
+
+#define	MSR_GLIU0			(GL0_GLIU0 << 29) + (1 << 28)	/* 1000xxxx - To get on GeodeLink one bit has to be set */
+#define	MSR_MC				(GL0_MC		<< 29)	/* 2000xxxx */
+#define	MSR_GLIU1			(GL0_GLIU1	<< 29)	/* 4000xxxx */
+#define	MSR_CPU				(GL0_CPU	<< 32)	/* 0000xxxx - this is not used for BIOS */	//GX3
+#define	MSR_VG				(GL0_VG		<< 29)	/* 8000xxxx */
+#define	MSR_GP				(GL0_GP		<< 29)	/* A000xxxx */
+//#define	MSR_DF				(GL0_DF		<< 29)	/* C000xxxx */  //GX3 no such thing
+
+#define	MSR_GLCP			(GL1_GLCP << 26) + MSR_GLIU1	/* 4C00xxxx */
+#define	MSR_PCI				(GL1_PCI << 26) + MSR_GLIU1	/* 5000xxxx */
+//#define	MSR_FG				(GL1_FG << 26) + MSR_GLIU1	/* 5400xxxx */		//GX3: no such thing
+#define MSR_VIP				((GL1_VIP << 26) + MSR_GLIU1)	/* 5400xxxx */
+#define MSR_AES				((GL1_AES << 26) + MSR_GLIU1)	/* 5800xxxx */
+/* South Bridge*/
+#define SB_PORT	2			/* port of the SouthBridge */
+#define	MSR_SB				((SB_PORT << 23) + MSR_PCI)	/* 5100xxxx - address to the SouthBridge*/
+#define	SB_SHIFT			20							/* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift.*/
+
+
+/**/
+/*GeodeLink Interface Unit 0 (GLIU0) port0*/
+/**/
+
+#define	GLIU0_GLD_MSR_CAP			(MSR_GLIU0 + 0x2000)
+#define	GLIU0_GLD_MSR_PM			(MSR_GLIU0 + 0x2004)
+
+#define	GLIU0_DESC_BASE				(MSR_GLIU0 + 0x20)
+#define	GLIU0_CAP					(MSR_GLIU0 + 0x86)
+#define	GLIU0_GLD_MSR_COH			(MSR_GLIU0 + 0x80)
+
+
+/**/
+/* Memory Controller GLIU0 port 1*/
+/**/
+#define	MC_GLD_MSR_CAP			(MSR_MC + 0x2000)
+#define	MC_GLD_MSR_PM			(MSR_MC + 0x2004)
+
+#define	MC_CF07_DATA			(MSR_MC + 0x18)
+
+#define		CF07_UPPER_D1_SZ_SHIFT				28
+#define		CF07_UPPER_D1_MB_SHIFT				24
+#define		CF07_UPPER_D1_CB_SHIFT				20
+#define		CF07_UPPER_D1_PSZ_SHIFT				16
+#define		CF07_UPPER_D0_SZ_SHIFT				12
+#define		CF07_UPPER_D0_MB_SHIFT				8
+#define		CF07_UPPER_D0_CB_SHIFT				4
+#define		CF07_UPPER_D0_PSZ_SHIFT				0
+
+#define		CF07_LOWER_REF_INT_SHIFT				8
+#define		CF07_LOWER_LOAD_MODE_DDR_SET		(1 << 28)
+#define		CF07_LOWER_LOAD_MODE_DLL_RESET		(1 << 27)
+#define		CF07_LOWER_EMR_QFC_SET				(1 << 26)
+#define		CF07_LOWER_EMR_DRV_SET				(1 << 25)
+#define		CF07_LOWER_REF_TEST_SET				(1 << 3)
+#define		CF07_LOWER_PROG_DRAM_SET			(1 << 0)
+
+
+#define	MC_CF8F_DATA			(MSR_MC + 0x19)
+
+#define		CF8F_UPPER_XOR_BS_SHIFT				19
+#define		CF8F_UPPER_XOR_MB0_SHIFT			18
+#define		CF8F_UPPER_XOR_BA1_SHIFT			17
+#define		CF8F_UPPER_XOR_BA0_SHIFT			16
+#define		CF8F_UPPER_REORDER_DIS_SET		(1 << 8)
+#define		CF8F_UPPER_REG_DIMM_SHIFT			4
+#define		CF8F_LOWER_CAS_LAT_SHIFT			28
+#define		CF8F_LOWER_REF2ACT_SHIFT			24
+#define		CF8F_LOWER_ACT2PRE_SHIFT			20
+#define		CF8F_LOWER_PRE2ACT_SHIFT			16
+#define		CF8F_LOWER_ACT2CMD_SHIFT			12
+#define		CF8F_LOWER_ACT2ACT_SHIFT			8
+#define		CF8F_UPPER_32BIT_SET				(1 << 5)
+#define		CF8F_UPPER_HOI_LOI_SET			(1 << 1)
+
+#define	MC_CF1017_DATA			(MSR_MC + 0x1A)
+
+#define		CF1017_LOWER_PM1_UP_DLY_SET			(1 << 8)
+#define		CF1017_LOWER_WR2DAT_SHIFT			0
+
+#define	MC_CFCLK_DBUG			(MSR_MC + 0x1D)
+
+#define		CFCLK_UPPER_MTST_B2B_DIS_SET			(1 << 2)
+#define		CFCLK_UPPER_MTST_DQS_EN_SET			(1 << 1)
+#define		CFCLK_UPPER_MTEST_EN_SET				(1 << 0)
+
+#define		CFCLK_LOWER_MASK_CKE_SET1			(1 << 9)
+#define		CFCLK_LOWER_MASK_CKE_SET0			(1 << 8)
+#define		CFCLK_LOWER_SDCLK_SET				(0x0F << 0)
+
+#define	MC_CF_RDSYNC			(MSR_MC	+ 0x1F)
+
+
+/**/
+/* GLIU1 GLIU0 port2*/
+/**/
+#define	GLIU1_GLD_MSR_CAP			(MSR_GLIU1 + 0x2000)
+#define	GLIU1_GLD_MSR_PM			(MSR_GLIU1 + 0x2004)
+
+#define	GLIU1_GLD_MSR_COH			(MSR_GLIU1 + 0x80)
+
+
+/**/
+/* CPU	; does not need routing instructions since we are executing there.*/
+/**/
+#define	CPU_GLD_MSR_CAP						0x2000
+#define	CPU_GLD_MSR_CONFIG					0x2001
+#define	CPU_GLD_MSR_PM						0x2004
+
+#define	CPU_GLD_MSR_DIAG					0x2005
+#define		DIAG_SEL1_MODE_SHIFT				16
+#define		DIAG_SEL1_SET						(1 << 31)
+#define		DIAG_SEL0__MODE_SHIFT				0
+#define		DIAG_SET0_SET						(1 << 15)
+
+#define	CPU_PF_BTB_CONF						0x1100
+#define		BTB_ENABLE_SET						(1 << 0)
+#define		RETURN_STACK_ENABLE_SET				(1 << 4)
+#define	CPU_PF_BTBRMA_BIST					0x110C
+
+#define	CPU_XC_CONFIG						0x1210
+#define		XC_CONFIG_SUSP_ON_HLT				(1 << 0)
+#define	CPU_ID_CONFIG						0x1250
+#define		ID_CONFIG_SERIAL_SET				(1 << 0)
+
+#define	CPU_AC_MSR							0x1301
+#define	CPU_EX_BIST							0x1428
+
+/*IM*/
+#define	CPU_IM_CONFIG							0x1700
+#define		IM_CONFIG_LOWER_ICD_SET					(1 << 8)
+#define		IM_CONFIG_LOWER_QWT_SET					(1 << 20)
+#define	CPU_IC_INDEX							0x1710
+#define	CPU_IC_DATA								0x1711
+#define	CPU_IC_TAG								0x1712
+#define	CPU_IC_TAG_I							0x1713
+#define	CPU_ITB_INDEX							0x1720
+#define	CPU_ITB_LRU								0x1721
+#define	CPU_ITB_ENTRY							0x1722
+#define	CPU_ITB_ENTRY_I							0x1723
+#define	CPU_IM_BIST_TAG							0x1730
+#define	CPU_IM_BIST_DATA						0x1731
+
+
+/* various CPU MSRs */
+#define CPU_DM_CONFIG0 0x1800
+#define	DM_CONFIG0_UPPER_WSREQ_SHIFT  12
+#define	DM_CONFIG0_LOWER_DCDIS_SET		(1<<8)
+#define	DM_CONFIG0_LOWER_WBINVD_SET	(1<<5)
+#define	DM_CONFIG0_LOWER_MISSER_SET		(1<<1)
+/* configuration MSRs */
+#define	CPU_RCONF_DEFAULT						0x1808
+#define		RCONF_DEFAULT_UPPER_ROMRC_SHIFT				24
+#define		RCONF_DEFAULT_UPPER_ROMBASE_SHIFT			4
+#define		RCONF_DEFAULT_UPPER_DEVRC_HI_SHIFT			0
+#define		RCONF_DEFAULT_LOWER_DEVRC_LOW_SHIFT			28
+#define		RCONF_DEFAULT_LOWER_SYSTOP_SHIFT			8
+#define		RCONF_DEFAULT_LOWER_SYSRC_SHIFT				0
+
+#define	CPU_RCONF_BYPASS						0x180A
+#define	CPU_RCONF_A0_BF							0x180B
+#define	CPU_RCONF_C0_DF							0x180C
+#define	CPU_RCONF_E0_FF							0x180D
+
+#define	CPU_RCONF_SMM							0x180E
+#define		RCONF_SMM_UPPER_SMMTOP_SHIFT			12
+#define		RCONF_SMM_UPPER_RCSMM_SHIFT				0
+#define		RCONF_SMM_LOWER_SMMBASE_SHIFT			12
+#define		RCONF_SMM_LOWER_RCNORM_SHIFT			0
+#define		RCONF_SMM_LOWER_EN_SET					(1<<8)
+
+#define	CPU_RCONF_DMM							0x180F
+#define		RCONF_DMM_UPPER_DMMTOP_SHIFT			12
+#define		RCONF_DMM_UPPER_RCDMM_SHIFT				0
+#define		RCONF_DMM_LOWER_DMMBASE_SHIFT			12
+#define		RCONF_DMM_LOWER_RCNORM_SHIFT			0
+#define		RCONF_DMM_LOWER_EN_SET					(1<<8)
+
+#define	CPU_RCONF0							0x1810
+#define	CPU_RCONF1							0x1811
+#define	CPU_RCONF2							0x1812
+#define	CPU_RCONF3							0x1813
+#define	CPU_RCONF4							0x1814
+#define	CPU_RCONF5							0x1815
+#define	CPU_RCONF6							0x1816
+#define	CPU_RCONF7							0x1817
+#define	CPU_CR1_MSR							0x1881
+#define	CPU_CR2_MSR							0x1882
+#define	CPU_CR3_MSR							0x1883
+#define	CPU_CR4_MSR							0x1884
+#define	CPU_DC_INDEX						0x1890
+#define	CPU_DC_DATA							0x1891
+#define	CPU_DC_TAG							0x1892
+#define	CPU_DC_TAG_I						0x1893
+#define	CPU_SNOOP							0x1894
+#define	CPU_DTB_INDEX						0x1898
+#define	CPU_DTB_LRU							0x1899
+#define	CPU_DTB_ENTRY						0x189A
+#define	CPU_DTB_ENTRY_I						0x189B
+#define	CPU_L2TB_INDEX						0x189C
+#define	CPU_L2TB_LRU						0x189D
+#define	CPU_L2TB_ENTRY						0x189E
+#define	CPU_L2TB_ENTRY_I					0x189F
+#define	CPU_DM_BIST							0x18C0
+		/* SMM*/
+#define	CPU_AC_SMM_CTL						0x1301
+#define		SMM_NMI_EN_SET					(1<<0)
+#define		SMM_SUSP_EN_SET					(1<<1)
+#define		NEST_SMI_EN_SET					(1<<2)
+#define		SMM_INST_EN_SET					(1<<3)
+#define		INTL_SMI_EN_SET					(1<<4)
+#define		EXTL_SMI_EN_SET					(1<<5)
+	
+#define	CPU_FPU_MSR_MODE					0x1A00
+#define		FPU_IE_SET						(1<<0)
+	
+#define	CPU_FP_UROM_BIST					0x1A03
+	
+#define	CPU_BC_CONF_0						0x1900
+#define		TSC_SUSP_SET				 (1<<5)
+#define		SUSP_EN_SET				 (1<<12)
+	
+	/**/
+	/*	VG GLIU0 port4*/
+	/**/
+	
+#define	VG_GLD_MSR_CAP				(MSR_VG + 0x2000)
+#define	VG_GLD_MSR_CONFIG			(MSR_VG + 0x2001)
+#define	VG_GLD_MSR_PM				(MSR_VG + 0x2004)
+
+#define	GP_GLD_MSR_CAP				(MSR_GP + 0x2000)
+#define	GP_GLD_MSR_CONFIG			(MSR_GP + 0x2001)
+#define	GP_GLD_MSR_PM				(MSR_GP + 0x2004)
+
+
+
+/**/
+/*	DF GLIU0 port6*/
+/**/
+/*
+#define	DF_GLD_MSR_CAP					(MSR_DF + 0x2000)
+#define	DF_GLD_MSR_MASTER_CONF			(MSR_DF + 0x2001)
+#define		DF_LOWER_LCD_SHIFT				6
+#define	DF_GLD_MSR_PM					(MSR_DF + 0x2004)
+
+*/
+
+/**/
+/* GeodeLink Control Processor GLIU1 port3*/
+/**/
+#define	GLCP_GLD_MSR_CAP			(MSR_GLCP + 0x2000)
+#define	GLCP_GLD_MSR_CONF			(MSR_GLCP + 0x2001)
+#define	GLCP_GLD_MSR_PM				(MSR_GLCP + 0x2004)
+
+#define	GLCP_DELAY_CONTROLS			(MSR_GLCP + 0x0F)
+
+#define	GLCP_SYS_RSTPLL				(MSR_GLCP +0x14	/* R/W*/)
+#define		RSTPLL_UPPER_MDIV_SHIFT				9
+#define		RSTPLL_UPPER_VDIV_SHIFT				6
+#define		RSTPLL_UPPER_FBDIV_SHIFT			0
+	
+#define		RSTPLL_LOWER_SWFLAGS_SHIFT			26
+#define		RSTPLL_LOWER_SWFLAGS_MASK			(0x3F<<RSTPLL_LOWER_SWFLAGS_SHIFT)
+
+#define		RSTPPL_LOWER_HOLD_COUNT_SHIFT			16
+#define		RSTPPL_LOWER_BYPASS_SHIFT			15
+#define		RSTPPL_LOWER_TST_SHIFT				11
+#define		RSTPPL_LOWER_SDRMODE_SHIFT		 10
+#define		RSTPPL_LOWER_BOOTSTRAP_SHIFT		 4
+
+#define		RSTPPL_LOWER_LOCK_SET				(1<<25)
+#define		RSTPPL_LOWER_LOCKWAIT_SET			(1<<24)
+#define		RSTPPL_LOWER_BYPASS_SET				(1<<15)
+#define		RSTPPL_LOWER_PD_SET					(1<<14)
+#define		RSTPPL_LOWER_PLL_RESET_SET			(1<<13)
+#define		RSTPPL_LOWER_SDRMODE_SET		 (1<<10)
+#define		RSTPPL_LOWER_CPU_SEMI_SYNC_SET		 (1<<9)
+#define		RSTPPL_LOWER_PCI_SEMI_SYNC_SET		 (1<<8)
+#define		RSTPPL_LOWER_CHIP_RESET_SET		 (1<<0)
+
+#define	GLCP_DOTPLL				(MSR_GLCP + 0x15	/* R/W*/)
+#define		DOTPPL_LOWER_PD_SET				 (1<<14)
+
+
+/**/
+/*  GLIU1 port 4*/
+/**/
+#define	GLPCI_GLD_MSR_CAP			(MSR_PCI + 0x2000)
+#define	GLPCI_GLD_MSR_CONFIG			(MSR_PCI + 0x2001)
+#define	GLPCI_GLD_MSR_PM				(MSR_PCI + 0x2004)
+
+#define	GLPCI_CTRL			(MSR_PCI + 0x2010)
+#define	GLPCI_CTRL_UPPER_FTH_SHIFT				28
+#define	GLPCI_CTRL_UPPER_RTH_SHIFT				24
+#define	GLPCI_CTRL_UPPER_SBRTH_SHIFT				20
+#define	GLPCI_CTRL_UPPER_DTL_SHIFT				14
+#define	GLPCI_CTRL_UPPER_WTO_SHIFT				11
+#define	GLPCI_CTRL_UPPER_LAT_SHIFT				3
+#define	GLPCI_CTRL_UPPER_ILTO_SHIFT				8
+#define	GLPCI_CTRL_LOWER_IRFT_SHIFT				18
+#define	GLPCI_CTRL_LOWER_IRFC_SHIFT				16
+#define	GLPCI_CTRL_LOWER_ER_SET					(1<<11)
+#define	GLPCI_CTRL_LOWER_LDE_SET					(1<<9)
+#define	GLPCI_CTRL_LOWER_OWC_SET					(1<<4)
+#define	GLPCI_CTRL_LOWER_IWC_SET					(1<<3)
+#define	GLPCI_CTRL_LOWER_PCD_SET					(1<<2)
+#define	GLPCI_CTRL_LOWER_ME_SET					(1<<0)
+
+#define	GLPCI_ARB			(MSR_PCI + 0x2011)
+#define	GLPCI_ARB_UPPER_BM1_SET					(1<<17)
+#define	GLPCI_ARB_UPPER_BM0_SET					(1<<16)
+#define	GLPCI_ARB_UPPER_CPRE_SET					(1<<15)
+#define	GLPCI_ARB_UPPER_PRE2_SET					(1<<10)
+#define	GLPCI_ARB_UPPER_PRE1_SET					(1<<9)
+#define	GLPCI_ARB_UPPER_PRE0_SET					(1<<8)
+#define	GLPCI_ARB_UPPER_CRME_SET					(1<<7)
+#define	GLPCI_ARB_UPPER_RME2_SET					(1<<2)
+#define	GLPCI_ARB_UPPER_RME1_SET					(1<<1)
+#define	GLPCI_ARB_UPPER_RME0_SET					(1<<0)
+#define	GLPCI_ARB_LOWER_PRCM_SHIFT				24
+#define	GLPCI_ARB_LOWER_FPVEC_SHIFT				16
+#define	GLPCI_ARB_LOWER_RMT_SHIFT				6
+#define	GLPCI_ARB_LOWER_IIE_SET					(1<<8)
+#define	GLPCI_ARB_LOWER_PARK_SET					(1<<0)
+
+#define	GLPCI_REN			(MSR_PCI + 0x2014)
+#define	GLPCI_A0_BF			(MSR_PCI + 0x2015)
+#define	GLPCI_C0_DF			(MSR_PCI + 0x2016)
+#define	GLPCI_E0_FF			(MSR_PCI + 0x2017)
+#define	GLPCI_RC0			(MSR_PCI + 0x2018)
+#define	GLPCI_RC1			(MSR_PCI + 0x2019)
+#define	GLPCI_RC2			(MSR_PCI + 0x201A)
+#define	GLPCI_RC3			(MSR_PCI + 0x201B)
+#define	GLPCI_RC4			(MSR_PCI + 0x201C)
+#define		GLPCI_RC_UPPER_TOP_SHIFT				12
+#define		GLPCI_RC_LOWER_BASE_SHIFT			12
+#define		GLPCI_RC_LOWER_EN_SET				(1<<8)
+#define		GLPCI_RC_LOWER_PF_SET				(1<<5)
+#define		GLPCI_RC_LOWER_WC_SET				(1<<4)
+#define		GLPCI_RC_LOWER_WP_SET				(1<<2)
+#define		GLPCI_RC_LOWER_CD_SET				(1<<0)
+#define	GLPCI_EXT_MSR			(MSR_PCI + 0x201E)
+#define	GLPCI_SPARE			(MSR_PCI + 0x201F)
+#define		GLPCI_SPARE_LOWER_AILTO_SET					(1<<6)
+#define		GLPCI_SPARE_LOWER_PPD_SET					(1<<5)
+#define		GLPCI_SPARE_LOWER_PPC_SET					(1<<4)
+#define		GLPCI_SPARE_LOWER_MPC_SET					(1<<3)
+#define		GLPCI_SPARE_LOWER_MME_SET					(1<<2)
+#define		GLPCI_SPARE_LOWER_NSE_SET					(1<<1)
+#define		GLPCI_SPARE_LOWER_SUPO_SET					(1<<0)
+
+
+/**/
+/* FooGlue GLIU1 port 5*/
+/**/
+/*	GX3 not needed?
+#define	FG_GLD_MSR_CAP			(MSR_FG + 0x2000)
+#define	FG_GLD_MSR_PM			(MSR_FG + 0x2004)
+*/
+/*  VIP GLIU1 port 5*/
+/* */
+#define VIP_GLD_MSR_CAP		(MSR_VIP + 0x2000)
+#define VIP_GLD_MSR_CONFIG	(MSR_VIP + 0x2001)
+#define VIP_GLD_MSR_PM		(MSR_VIP + 0x2004)
+#define VIP_BIST			(MSR_VIP + 0x2005)
+/* */
+/*  AES GLIU1 port 6*/
+/* */
+#define AES_GLD_MSR_CAP		(MSR_AES + 0x2000)
+#define AES_GLD_MSR_CONFIG	(MSR_AES + 0x2001)
+#define AES_GLD_MSR_PM		(MSR_AES + 0x2004)
+#define AES_CONTROL			(MSR_AES + 0x2006)
+/* more fun stuff */
+#define BM			1	/*  Base Mask - map power of 2 size aligned region*/
+#define BMO			2	/*  BM with an offset*/
+#define R				3	/*  Range - 4k range minimum*/
+#define RO			4	/*  R with offset*/
+#define SC			5	/*  Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/
+#define BMIO			6	/*  Base Mask IO*/
+#define SCIO			7	/*  Swiss 0xCeese IO*/
+#define SC_SHADOW	8	/*  Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/
+#define R_SYSMEM		9	/*  Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/
+#define BMO_SMM		10	/*  Specail marker for SMM*/
+#define BM_SMM		11	/*  Specail marker for SMM*/
+#define BMO_DMM		12	/*  Specail marker for DMM*/
+#define BM_DMM		13	/*  Specail marker for DMM*/
+#define RO_FB			14	/*  special for Frame buffer.*/
+#define R_FB			15	/*  special for FB.*/
+#define OTHER			0x0FE /*  Special marker for other*/
+#define GL_END		 0x0FF	/*  end*/
+
+#define MSR_GL0	(GL1_GLIU0 << 29)
+
+/*  Set up desc addresses from 20 - 3f*/
+/*  This is chip specific!*/
+#define MSR_GLIU0_BASE1			(MSR_GLIU0 + 0x20)		/*  BM*/
+#define MSR_GLIU0_BASE2			(MSR_GLIU0 + 0x21)		/*  BM*/
+#define MSR_GLIU0_SHADOW			(MSR_GLIU0 + 0x2C)		/*  SCO should only be SC*/
+#define MSR_GLIU0_SYSMEM			(MSR_GLIU0 + 0x28)		/*  RO should only be R*/
+#define MSR_GLIU0_SMM			(MSR_GLIU0 + 0x26)		/*  BMO*/
+#define MSR_GLIU0_DMM			(MSR_GLIU0 + 0x27)		/*  BMO*/
+
+#define MSR_GLIU1_BASE1			(MSR_GLIU1 + 0x20)		/*  BM*/
+#define MSR_GLIU1_BASE2			(MSR_GLIU1 + 0x21)		/*  BM*/
+#define MSR_GLIU1_SHADOW			(MSR_GLIU1 + 0x2D)		/*  SCO should only be SC*/
+#define MSR_GLIU1_SYSMEM			(MSR_GLIU1 + 0x29)		/*  RO should only be R*/
+#define MSR_GLIU1_SMM			(MSR_GLIU1 + 0x23)		/*  BM*/
+#define MSR_GLIU1_DMM			(MSR_GLIU1 + 0x24)		/*  BM*/
+#define MSR_GLIU1_FPU_TRAP		(MSR_GLIU1 + 0x0E3)	/*  FooGlue F0 for FPU*/
+
+/* definitions that are "once you are mostly up, start VSA" type things */
+#define SMM_OFFSET	(0x40400000)
+#define SMM_SIZE		(128)			/* changed SMM_SIZE from 256 KB to 128 KB */
+#define DMM_OFFSET	(0x0C0000000)
+#define DMM_SIZE		(128)
+#define FB_OFFSET		(0x41000000)
+#define PCI_MEM_TOP	(0x0EFFFFFFF)	 // Top of PCI mem allocation region
+#define PCI_IO_TOP		(0x0EFFF)		 // Top of PCI I/O allocation region
+#define END_OPTIONROM_SPACE	(0x0DFFF)		 // E0000 is reserved for SystemROMs.
+
+
+#define CS5535_IDSEL	(0x02000000)	 // IDSEL = AD25, device #15
+#define CHIPSET_DEV_NUM	(15)
+#define IDSEL_BASE	(11)			 // bit 11 = device 1
+
+
+/* standard AMD post definitions -- might as well use them. */
+#define POST_Output_Port				(0x080)	/*  port to write post codes to*/
+
+#define POST_preSioInit					(0x000)	/* geode.asm*/
+#define POST_clockInit					(0x001)	/* geode.asm*/
+#define POST_CPURegInit					(0x002)	/* geode.asm*/
+#define POST_UNREAL					(0x003)	/* geode.asm*/
+#define POST_CPUMemRegInit				(0x004)	/* geode.asm*/
+#define POST_CPUTest					(0x005)	/* geode.asm*/
+#define POST_memSetup					(0x006)	/* geode.asm*/
+#define POST_memSetUpStack				(0x007)	/* geode.asm*/
+#define POST_memTest					(0x008)	/* geode.asm*/
+#define POST_shadowRom				(0x009)	/* geode.asm*/
+#define POST_memRAMoptimize			(0x00A)	/* geode.asm*/
+#define POST_cacheInit					(0x00B)	/* geode.asm*/
+#define POST_northBridgeInit				(0x00C)	/* geode.asm*/
+#define POST_chipsetInit					(0x00D)	/* geode.asm*/
+#define POST_sioTest					(0x00E)	/* geode.asm*/
+#define POST_pcATjunk					(0x00F)	/* geode.asm*/
+
+
+#define POST_intTable					(0x010)	/* geode.asm*/
+#define POST_memInfo					(0x011)	/* geode.asm*/
+#define POST_romCopy					(0x012)	/* geode.asm*/
+#define POST_PLLCheck					(0x013)	/* geode.asm*/
+#define POST_keyboardInit				(0x014)	/* geode.asm*/
+#define POST_cpuCacheOff				(0x015)	/* geode.asm*/
+#define POST_BDAInit					(0x016)	/* geode.asm*/
+#define POST_pciScan					(0x017)	/* geode.asm*/
+#define POST_optionRomInit				(0x018)	/* geode.asm*/
+#define POST_ResetLimits				(0x019)	/* geode.asm*/
+#define POST_summary_screen			(0x01A)	/* geode.asm*/
+#define POST_Boot						(0x01B)	/* geode.asm*/
+#define POST_SystemPreInit				(0x01C)	/* geode.asm*/
+#define POST_ClearRebootFlag				(0x01D)	/* geode.asm*/
+#define POST_GLIUInit					(0x01E)	/* geode.asm*/
+#define POST_BootFailed					(0x01F)	/* geode.asm*/
+
+
+#define POST_CPU_ID					(0x020)	/* cpucpuid.asm*/
+#define POST_COUNTERBROKEN			(0x021)	/* pllinit.asm*/
+#define POST_DIFF_DIMMS				(0x022)	/* pllinit.asm*/
+#define POST_WIGGLE_MEM_LINES			(0x023)	/* pllinit.asm*/
+#define POST_NO_GLIU_DESC				(0x024)	/* pllinit.asm*/
+#define POST_CPU_LCD_CHECK			(0x025)	/* pllinit.asm*/
+#define POST_CPU_LCD_PASS				(0x026)	/* pllinit.asm*/
+#define POST_CPU_LCD_FAIL				(0x027)	/* pllinit.asm*/
+#define POST_CPU_STEPPING				(0x028)	/* cpucpuid.asm*/
+#define POST_CPU_DM_BIST_FAILURE		(0x029)	/* gx2reg.asm*/
+#define POST_CPU_FLAGS				(0x02A)	/* cpucpuid.asm*/
+#define POST_CHIPSET_ID				(0x02b)	/* chipset.asm*/
+#define POST_CHIPSET_ID_PASS			(0x02c)	/* chipset.asm*/
+#define POST_CHIPSET_ID_FAIL			(0x02d)	/* chipset.asm*/
+#define POST_CPU_ID_GOOD				(0x02E)	/* cpucpuid.asm*/
+#define POST_CPU_ID_FAIL				(0x02F)	/* cpucpuid.asm*/
+
+
+
+/*  PCI config*/
+#define P80_PCICFG						(0x030)	/*  pcispace.asm*/
+
+
+/*  PCI io*/
+#define P80_PCIIO						(0x040)	/*  pcispace.asm*/
+
+
+/*  PCI memory*/
+#define P80_PCIMEM					(0x050)	/*  pcispace.asm*/
+
+
+/*  SIO*/
+#define P80_SIO						(0x060)		/*  *sio.asm*/
+
+/*  Memory Setp*/
+#define P80_MEM_SETUP					(0x070)	/* docboot meminit*/
+#define POST_MEM_SETUP				(0x070)	/* memsize.asm*/
+#define ERROR_32BIT_DIMMS				(0x071)	/* memsize.asm*/
+#define POST_MEM_SETUP2				(0x072)	/* memsize.asm*/
+#define POST_MEM_SETUP3				(0x073)	/* memsize.asm*/
+#define POST_MEM_SETUP4				(0x074)	/* memsize.asm*/
+#define POST_MEM_SETUP5				(0x075)	/* memsize.asm*/
+#define POST_MEM_ENABLE				(0x076)	/* memsize.asm*/
+#define ERROR_NO_DIMMS				(0x077)	/* memsize.asm*/
+#define ERROR_DIFF_DIMMS				(0x078)	/* memsize.asm*/
+#define ERROR_BAD_LATENCY				(0x079)	/* memsize.asm*/
+#define ERROR_SET_PAGE				(0x07a)	/* memsize.asm*/
+#define ERROR_DENSITY_DIMM			(0x07b)	/* memsize.asm*/
+#define ERROR_UNSUPPORTED_DIMM		(0x07c)	/* memsize.asm*/
+#define ERROR_BANK_SET				(0x07d)	/* memsize.asm*/
+#define POST_MEM_SETUP_GOOD			(0x07E)	/* memsize.asm*/
+#define POST_MEM_SETUP_FAIL			(0x07F)	/* memsize.asm*/
+
+
+#define POST_UserPreInit					(0x080)	/* geode.asm*/
+#define POST_UserPostInit				(0x081)	/* geode.asm*/
+#define POST_Equipment_check			(0x082)	/* geode.asm*/
+#define POST_InitNVRAMBX				(0x083)	/* geode.asm*/
+#define POST_NoPIRTable				(0x084)	/* pci.asm*/
+#define POST_ChipsetFingerPrintPass		(0x085)	/*  prechipsetinit*/
+#define POST_ChipsetFingerPrintFail		(0x086)	/*  prechipsetinit*/
+#define POST_CPU_IM_TAG_BIST_FAILURE	(0x087)	/*  gx2reg.asm*/
+#define POST_CPU_IM_DATA_BIST_FAILURE	(0x088)	/*  gx2reg.asm*/
+#define POST_CPU_FPU_BIST_FAILURE		(0x089)	/*  gx2reg.asm*/
+#define POST_CPU_BTB_BIST_FAILURE		(0x08a)	/*  gx2reg.asm*/
+#define POST_CPU_EX_BIST_FAILURE		(0x08b)	/*  gx2reg.asm*/
+#define POST_Chipset_PI_Test_Fail			(0x08c)	/*  prechipsetinit*/
+#define POST_Chipset_SMBus_SDA_Test_Fail	(0x08d)	/*  prechipsetinit*/
+#define POST_BIT_CLK_Fail				(0x08e)	/*  Hawk geode.asm override*/
+
+
+#define POST_STACK_SETUP				(0x090)	/* memstack.asm*/
+#define POST_CPU_PF_BIST_FAILURE		(0x091)	/*  gx2reg.asm*/
+#define POST_CPU_L2_BIST_FAILURE		(0x092)	/*  gx2reg.asm*/
+#define POST_CPU_GLCP_BIST_FAILURE		(0x093)	/*  gx2reg.asm*/
+#define POST_CPU_DF_BIST_FAILURE		(0x094)	/*  gx2reg.asm*/
+#define POST_CPU_VG_BIST_FAILURE		(0x095)	/*  gx2reg.asm*/
+#define POST_CPU_VIP_BIST_FAILURE		(0x096)	/*  gx2reg.asm*/
+#define POST_STACK_SETUP_PASS			(0x09E)	/* memstack.asm*/
+#define POST_STACK_SETUP_FAIL			(0x09F)	/* memstack.asm*/
+
+
+#define POST_PLL_INIT					(0x0A0)	/* pllinit.asm*/
+#define POST_PLL_MANUAL				(0x0A1)	/* pllinit.asm*/
+#define POST_PLL_STRAP					(0x0A2)	/* pllinit.asm*/
+#define POST_PLL_RESET_FAIL			(0x0A3)	/* pllinit.asm*/
+#define POST_PLL_PCI_FAIL				(0x0A4)	/* pllinit.asm*/
+#define POST_PLL_MEM_FAIL				(0x0A5)	/* pllinit.asm*/
+#define POST_PLL_CPU_VER_FAIL			(0x0A6)	/* pllinit.asm*/
+
+
+#define POST_MEM_TESTMEM				(0x0B0)	/* memtest.asm*/
+#define POST_MEM_TESTMEM1			(0x0B1)	/* memtest.asm*/
+#define POST_MEM_TESTMEM2			(0x0B2)	/* memtest.asm*/
+#define POST_MEM_TESTMEM3			(0x0B3)	/* memtest.asm*/
+#define POST_MEM_TESTMEM4			(0x0B4)	/* memtest.asm*/
+#define POST_MEM_TESTMEM_PASS		(0x0BE)	/* memtest.asm*/
+#define POST_MEM_TESTMEM_FAIL		(0x0BF)	/* memtest.asm*/
+
+
+#define POST_SECUROM_SECBOOT_START        (0x0C0)	/* secstart.asm*/
+#define POST_SECUROM_BOOTSRCSETUP         (0x0C1)	/* secstart.asm*/
+#define POST_SECUROM_REMAP_FAIL          	 (0x0C2)	/* secstart.asm*/
+#define POST_SECUROM_BOOTSRCSETUP_FAIL    (0x0C3)	/* secstart.asm*/
+#define POST_SECUROM_DCACHESETUP          (0x0C4)	/* secstart.asm*/
+#define POST_SECUROM_DCACHESETUP_FAIL     (0x0C5)	/* secstart.asm*/
+#define POST_SECUROM_ICACHESETUP          (0x0C6)	/* secstart.asm*/
+#define POST_SECUROM_DESCRIPTORSETUP      (0x0C7)	/* secstart.asm*/
+#define POST_SECUROM_DCACHESETUPBIOS      (0x0C8)	/* secstart.asm*/
+#define POST_SECUROM_PLATFORMSETUP        (0x0C9)	/* secstart.asm*/
+#define POST_SECUROM_SIGCHECKBIOS         (0x0CA)	/* secstart.asm*/
+#define POST_SECUROM_ICACHESETUPBIOS      (0x0CB)	/* secstart.asm*/
+#define POST_SECUROM_PASS				  (0x0CC)	/* secstart.asm*/
+#define POST_SECUROM_FAIL				  (0x0CD)	/* secstart.asm*/
+
+#define POST_RCONFInitError				(0x0CE)	/* cache.asm*/
+#define POST_CacheInitError				(0x0CF)	/* cache.asm*/
+
+
+#define POST_ROM_PREUNCOMPRESS			(0x0D0)	/* rominit.asm*/
+#define POST_ROM_UNCOMPRESS				(0x0D1)	/* rominit.asm*/
+#define POST_ROM_SMM_INIT				(0x0D2)	/* rominit.asm*/
+#define POST_ROM_VID_BIOS				(0x0D3)	/* rominit.asm*/
+#define POST_ROM_LCDINIT				(0x0D4)	/* rominit.asm*/
+#define POST_ROM_SPLASH					(0x0D5)	/* rominit.asm*/
+#define POST_ROM_HDDINIT				(0x0D6)	/* rominit.asm*/
+#define POST_ROM_SYS_INIT				(0x0D7)	/* rominit.asm*/
+#define POST_ROM_DMM_INIT				(0x0D8)	/* rominit.asm*/
+#define POST_ROM_TVINIT					(0x0D9)	/* rominit.asm*/
+#define POST_ROM_POSTUNCOMPRESS			(0x0DE)
+
+
+#define P80_CHIPSET_INIT				(0x0E0)	/* chipset.asm*/
+#define POST_PreChipsetInit				(0x0E1)	/* geode.asm*/
+#define POST_LateChipsetInit			(0x0E2)	/* geode.asm*/
+#define POST_NORTHB_INIT				(0x0E8)	/* northb.asm*/
+
+
+#define POST_INTR_SEG_JUMP				(0x0F0)	/* vector.asm*/
+
+
+/* I don't mind if somebody decides this needs to be in a seperate file. I don't see much point
+  * in it, either. 
+  * RGM 
+  */
+#define Cx5535_ID	 (	0x002A100B)
+#define Cx5536_ID	 (	0x208F1022)
+
+/* Cs5535 as follows. */
+/*  SB_GLIU*/
+/* 	port0 - GLIU*/
+/* 	port1 - GLPCI*/
+/* 	port2 - USB Controller #2*/
+/* 	port3 - ATA-5 Controller*/
+/* 	port4 - MDD*/
+/* 	port5 - AC97*/
+/* 	port6 - USB Controller #1*/
+/* 	port7 - GLCP*/
+
+
+/*  SouthBridge Equates*/
+/*  MSR_SB and SB_SHIFT are located in CPU.inc*/
+#define MSR_SB_GLIU	 ((9 << 14) + MSR_SB)		/* 51024xxx or 510*xxxx	- fake out just like GL0 on CPU. */
+#define MSR_SB_GLPCI	 (MSR_SB)			/* 5100xxxx - don't go to the GLIU */
+#define MSR_SB_USB2	 ((2 << SB_SHIFT) + MSR_SB)	/* 5120xxxx */
+#define MSR_SB_ATA	 ((3 << SB_SHIFT) + MSR_SB)	/* 5130xxxx */
+#define MSR_SB_MDD	 ((4 << SB_SHIFT) + MSR_SB)	/* 5140xxxx, a.k.a. DIVIL = Diverse Integrated Logic device */
+#define MSR_SB_AC97	 ((5 << SB_SHIFT) + MSR_SB)	/* 5150xxxx */
+#define MSR_SB_USB1	 ((6 << SB_SHIFT) + MSR_SB)	/* 5160xxxx */
+#define MSR_SB_GLCP	 ((7 << SB_SHIFT) + MSR_SB)	/* 5170xxxx */
+
+/* */
+/* GLIU*/
+/* */
+#define GLIU_SB_GLD_MSR_CAP		 (	MSR_SB_GLIU + 0x00)
+#define GLIU_SB_GLD_MSR_CONF	 (	MSR_SB_GLIU + 0x01)
+#define GLIU_SB_GLD_MSR_PM		 (	MSR_SB_GLIU + 0x04)
+
+/* */
+/*  USB1*/
+/* */
+#define USB1_SB_GLD_MSR_CAP		 (	MSR_SB_USB1 + 0x00)
+#define USB1_SB_GLD_MSR_CONF	 (	MSR_SB_USB1 + 0x01)
+#define USB1_SB_GLD_MSR_PM		 (	MSR_SB_USB1 + 0x04)
+/* */
+/*  USB2*/
+/* */
+#define USB2_SB_GLD_MSR_CAP		 (	MSR_SB_USB2 + 0x00)
+#define USB2_SB_GLD_MSR_CONF	 (	MSR_SB_USB2 + 0x01)
+#define USB2_SB_GLD_MSR_PM		 (	MSR_SB_USB2 + 0x04)
+
+
+/* */
+/*  ATA*/
+/* */
+#define ATA_SB_GLD_MSR_CAP		 (	MSR_SB_ATA + 0x00)
+#define ATA_SB_GLD_MSR_CONF		 (	MSR_SB_ATA + 0x01)
+#define ATA_SB_GLD_MSR_ERR		 (	MSR_SB_ATA + 0x03)
+#define ATA_SB_GLD_MSR_PM		 (	MSR_SB_ATA + 0x04)
+
+/* */
+/*  AC97*/
+/* */
+#define AC97_SB_GLD_MSR_CAP		 (	MSR_SB_AC97 + 0x00)
+#define AC97_SB_GLD_MSR_CONF	 (	MSR_SB_AC97 + 0x01)
+#define AC97_SB_GLD_MSR_PM		 (	MSR_SB_AC97 + 0x04)
+
+/* */
+/*  GLPCI*/
+/* */
+#define GLPCI_SB_GLD_MSR_CAP	 (	MSR_SB_GLPCI + 0x00)
+#define GLPCI_SB_GLD_MSR_CONF	 (	MSR_SB_GLPCI + 0x01)
+#define GLPCI_SB_GLD_MSR_PM		 (	MSR_SB_GLPCI + 0x04)
+#define GLPCI_SB_CTRL			 (	MSR_SB_GLPCI + 0x10)
+#define 	GLPCI_CRTL_PPIDE_SET	 (	1 << 17)
+/* */
+/*  GLCP*/
+/* */
+#define GLCP_SB_GLD_MSR_CAP		 (	MSR_SB_GLCP + 0x00)
+#define GLCP_SB_GLD_MSR_CONF	 (	MSR_SB_GLCP + 0x01)
+#define GLCP_SB_GLD_MSR_PM		 (	MSR_SB_GLCP + 0x04)
+
+/* 	*/
+/*  MDD*/
+/* */
+
+#define MDD_SMBUS		(0x6000)
+#define MDD_GPIO		(0x6100)
+#define MDD_MFGPT		(0x6200)
+#define MDD_FLASH_BAR_0	(0x6400)
+#define MDD_FLASH_BAR_1	(0x6500)
+#define MDD_FLASH_BAR_2	(0x6600)
+#define MDD_FLASH_BAR_3	(0x6700)
+
+#define MDD_ACPI_BASE	(0x9C00)
+#define MDD_PM			(0x9D00)
+
+
+// # FIXME
+#define GPIO_BASE		MDD_GPIO
+#define ACPI_BASE		MDD_ACPI_BASE
+#define	PMLogic_BASE	MDD_PM
+
+
+#define MDD_SB_GLD_MSR_CAP		 (	MSR_SB_MDD + 0x00)
+#define MDD_SB_GLD_MSR_CONF		 (	MSR_SB_MDD + 0x01)
+#define MDD_SB_GLD_MSR_PM		 (	MSR_SB_MDD + 0x04)
+#define LBAR_EN			 (		0x01)
+#define IO_MASK			 (		0x1f)
+#define MEM_MASK		 (		0x0FFFFF)
+#define MDD_LBAR_IRQ	 (		MSR_SB_MDD + 0x08)
+#define MDD_LBAR_KEL1	 (		MSR_SB_MDD + 0x09)
+#define MDD_LBAR_KEL2	 (		MSR_SB_MDD + 0x0A)
+#define MDD_LBAR_SMB	 (		MSR_SB_MDD + 0x0B)
+#define MDD_LBAR_GPIO	 (		MSR_SB_MDD + 0x0C)
+#define MDD_LBAR_MFGPT	 (		MSR_SB_MDD + 0x0D)
+#define MDD_LBAR_ACPI	 (		MSR_SB_MDD + 0x0E)
+#define MDD_LBAR_PMS	 (		MSR_SB_MDD + 0x0F)
+
+#define MDD_LBAR_FLSH0	 (		MSR_SB_MDD + 0x010)
+#define MDD_LBAR_FLSH1	 (		MSR_SB_MDD + 0x011)
+#define MDD_LBAR_FLSH2	 (		MSR_SB_MDD + 0x012)
+#define MDD_LBAR_FLSH3	 (		MSR_SB_MDD + 0x013)
+#define MDD_LEG_IO		 (		MSR_SB_MDD + 0x014)
+#define MDD_PIN_OPT		 (		MSR_SB_MDD + 0x015)
+#define MDD_SOFT_IRQ	 (		MSR_SB_MDD + 0x016)
+#define MDD_SOFT_RESET	 (		MSR_SB_MDD + 0x017)
+#define MDD_NORF_CNTRL	 (		MSR_SB_MDD + 0x018)
+#define MDD_NORF_T01	 (		MSR_SB_MDD + 0x019)
+#define MDD_NORF_T23	 (		MSR_SB_MDD + 0x01A)
+#define MDD_NANDF_DATA	 (		MSR_SB_MDD + 0x01B)
+#define MDD_NADF_CNTL	 (		MSR_SB_MDD + 0x01C)
+#define MDD_AC_DMA		 (		MSR_SB_MDD + 0x01E)
+#define MDD_KEL_CNTRL	 (		MSR_SB_MDD + 0x01F)
+
+#define MDD_IRQM_YLOW	 (		MSR_SB_MDD + 0x020)
+#define MDD_IRQM_YHIGH	 (		MSR_SB_MDD + 0x021)
+#define MDD_IRQM_ZLOW	 (		MSR_SB_MDD + 0x022)
+#define MDD_IRQM_ZHIGH	 (		MSR_SB_MDD + 0x023)
+#define MDD_IRQM_PRIM	 (		MSR_SB_MDD + 0x024)
+#define MDD_IRQM_LPC	 (		MSR_SB_MDD + 0x025)
+#define MDD_IRQM_LXIRR	 (		MSR_SB_MDD + 0x026)
+#define MDD_IRQM_HXIRR	 (		MSR_SB_MDD + 0x027)
+
+#define MDD_MFGPT_IRQ	 (		MSR_SB_MDD + 0x028)
+#define MDD_MFGPT_NR	 (		MSR_SB_MDD + 0x029)
+#define MDD_MFGPT_RES0	 (		MSR_SB_MDD + 0x02A)
+#define MDD_MFGPT_RES1	 (		MSR_SB_MDD + 0x02B)
+
+#define MDD_FLOP_S3F2	 (		MSR_SB_MDD + 0x030)
+#define MDD_FLOP_S3F7	 (		MSR_SB_MDD + 0x031)
+#define MDD_FLOP_S372	 (		MSR_SB_MDD + 0x032)
+#define MDD_FLOP_S377	 (		MSR_SB_MDD + 0x033)
+
+#define MDD_PIC_S		 (		MSR_SB_MDD + 0x034)
+#define MDD_PIT_S		 (		MSR_SB_MDD + 0x036)
+#define MDD_PIT_CNTRL	 (		MSR_SB_MDD + 0x037)
+
+#define MDD_UART1_MOD	 (		MSR_SB_MDD + 0x038)
+#define MDD_UART1_DON	 (		MSR_SB_MDD + 0x039)
+#define MDD_UART1_CONF	 (		MSR_SB_MDD + 0x03A)
+#define MDD_UART2_MOD	 (		MSR_SB_MDD + 0x03C)
+#define MDD_UART2_DON	 (		MSR_SB_MDD + 0x03D)
+#define MDD_UART2_CONF	 (		MSR_SB_MDD + 0x03E)
+
+#define MDD_DMA_MAP		 (		MSR_SB_MDD + 0x040)
+#define MDD_DMA_SHAD1		 (		MSR_SB_MDD + 0x041)
+#define MDD_DMA_SHAD2		 (		MSR_SB_MDD + 0x042)
+#define MDD_DMA_SHAD3		 (		MSR_SB_MDD + 0x043)
+#define MDD_DMA_SHAD4		 (		MSR_SB_MDD + 0x044)
+#define MDD_DMA_SHAD5		 (		MSR_SB_MDD + 0x045)
+#define MDD_DMA_SHAD6		 (		MSR_SB_MDD + 0x046)
+#define MDD_DMA_SHAD7		 (		MSR_SB_MDD + 0x047)
+#define MDD_DMA_SHAD8		 (		MSR_SB_MDD + 0x048)
+#define MDD_DMA_SHAD9		 (		MSR_SB_MDD + 0x049)
+
+#define MDD_LPC_EADDR	 (		MSR_SB_MDD + 0x04C)
+#define MDD_LPC_ESTAT	 (		MSR_SB_MDD + 0x04D)
+#define MDD_LPC_SIRQ	 (		MSR_SB_MDD + 0x04E)
+#define MDD_LPC_RES		 (		MSR_SB_MDD + 0x04F)
+
+#define MDD_PML_TMR		 (		MSR_SB_MDD + 0x050)
+#define MDD_RTC_RAM_LO_CK	 (		MSR_SB_MDD + 0x054)
+#define MDD_RTC_DOMA_IND	 (		MSR_SB_MDD + 0x055)
+#define MDD_RTC_MONA_IND	 (		MSR_SB_MDD + 0x056)
+#define MDD_RTC_CENTURY_OFFSET	 (		MSR_SB_MDD + 0x057)
+
+/* ***********************************************************/
+/*  LBUS Device Equates - */
+/* ***********************************************************/
+
+/* */
+/*  SMBus*/
+/* */
+
+#define SMBUS_SMBSDA		 (		SMBUS_BASE + 0x00)
+#define SMBUS_SMBST			 (		SMBUS_BASE + 0x01)
+#define 	SMBST_SLVSTP_SET	 (		1 << 7)
+#define 	SMBST_SDAST_SET		 (		1 << 6)
+#define 	SMBST_BER_SET		 (		1 << 5)
+#define 	SMBST_NEGACK_SET	 (		1 << 4)
+#define 	SMBST_STASTR_SET	 (		1 << 3)
+#define 	SMBST_NMATCH_SET	 (		1 << 2)
+#define 	SMBST_MASTER_SET	 (		1 << 1)
+#define 	SMBST_XMIT_SET		 (		1 << 0)
+#define SMBUS_SMBCST		 (		SMBUS_BASE + 0x02)
+#define 	SMBCST_TGSCL_SET	 (		1 << 5)
+#define 	SMBCST_TSDA_SET		 (		1 << 4)
+#define 	SMBCST_GCMTCH_SET	 (		1 << 3)
+#define 	SMBCST_MATCH_SET	 (		1 << 2)
+#define 	SMBCST_BB_SET		 (		1 << 1)
+#define 	SMBCST_BUSY_SET		 (		1 << 0)
+#define SMBUS_SMBCTL1		 (		SMBUS_BASE + 0x03)
+#define 	SMBCTL1_STASTRE_SET	 (		1 << 7)
+#define 	SMBCTL1_NMINTE_SET	 (		1 << 6)
+#define 	SMBCTL1_GCMEN_SET	 (		1 << 5)
+#define 	SMBCTL1_RECACK_SET	 (		1 << 4)
+#define 	SMBCTL1_DMAEN_SET	 (		1 << 3)
+#define 	SMBCTL1_INTEN_SET	 (		1 << 2)
+#define 	SMBCTL1_STOP_SET	 (		1 << 1)
+#define 	SMBCTL1_START_SET	 (		1 << 0)
+#define SMBUS_SMBADDR		 (		SMBUS_BASE + 0x04)
+#define 	SMBADDR_SAEN_SET	 (		1 << 7)
+#define SMBUS_SMBCTL2		 (		SMBUS_BASE + 0x05)
+#define 	SMBCTL2_SCLFRQ_SHIFT	 (		1 << 1)
+#define 	SMBCTL2_ENABLE_SET		 (		1 << 0)
+
+/* */
+/*  GPIO*/
+/* */
+
+#define GPIOL_0_SET		 (		1 << 0)
+#define GPIOL_1_SET		 (		1 << 1)
+#define GPIOL_2_SET		 (		1 << 2)
+#define GPIOL_3_SET		 (		1 << 3)
+#define GPIOL_4_SET		 (		1 << 4)
+#define GPIOL_5_SET		 (		1 << 5)
+#define GPIOL_6_SET		 (		1 << 6)
+#define GPIOL_7_SET		 (		1 << 7)
+#define GPIOL_8_SET		 (		1 << 8)
+#define GPIOL_9_SET		 (		1 << 9)
+#define GPIOL_10_SET	 (		1 << 10)
+#define GPIOL_11_SET	 (		1 << 11)
+#define GPIOL_12_SET	 (		1 << 12)
+#define GPIOL_13_SET	 (		1 << 13)
+#define GPIOL_14_SET	 (		1 << 14)
+#define GPIOL_15_SET	 (		1 << 15)
+
+#define GPIOL_0_CLEAR	 (		1 << 16)
+#define GPIOL_1_CLEAR	 (		1 << 17)
+#define GPIOL_2_CLEAR	 (		1 << 18)
+#define GPIOL_3_CLEAR	 (		1 << 19)
+#define GPIOL_4_CLEAR	 (		1 << 20)
+#define GPIOL_5_CLEAR	 (		1 << 21)
+#define GPIOL_6_CLEAR	 (		1 << 22)
+#define GPIOL_7_CLEAR	 (		1 << 23)
+#define GPIOL_8_CLEAR	 (		1 << 24)
+#define GPIOL_9_CLEAR	 (		1 << 25)
+#define GPIOL_10_CLEAR	 (		1 << 26)
+#define GPIOL_11_CLEAR	 (		1 << 27)
+#define GPIOL_12_CLEAR	 (		1 << 28)
+#define GPIOL_13_CLEAR	 (		1 << 29)
+#define GPIOL_14_CLEAR	 (		1 << 30)
+#define GPIOL_15_CLEAR	 (		1 << 31)
+
+#define GPIOH_16_SET	 (		1 << 0)
+#define GPIOH_17_SET	 (		1 << 1)
+#define GPIOH_18_SET	 (		1 << 2)
+#define GPIOH_19_SET	 (		1 << 3)
+#define GPIOH_20_SET	 (		1 << 4)
+#define GPIOH_21_SET	 (		1 << 5)
+#define GPIOH_22_SET	 (		1 << 6)
+#define GPIOH_23_SET	 (		1 << 7)
+#define GPIOH_24_SET	 (		1 << 8)
+#define GPIOH_25_SET	 (		1 << 9)
+#define GPIOH_26_SET	 (		1 << 10)
+#define GPIOH_27_SET	 (		1 << 11)
+#define GPIOH_28_SET	 (		1 << 12)
+#define GPIOH_29_SET	 (		1 << 13)
+#define GPIOH_30_SET	 (		1 << 14)
+#define GPIOH_31_SET	 (		1 << 15)
+
+#define GPIOH_16_CLEAR	 (		1 << 16)
+#define GPIOH_17_CLEAR	 (		1 << 17)
+#define GPIOH_18_CLEAR	 (		1 << 18)
+#define GPIOH_19_CLEAR	 (		1 << 19)
+#define GPIOH_20_CLEAR	 (		1 << 20)
+#define GPIOH_21_CLEAR	 (		1 << 21)
+#define GPIOH_22_CLEAR	 (		1 << 22)
+#define GPIOH_23_CLEAR	 (		1 << 23)
+#define GPIOH_24_CLEAR	 (		1 << 24)
+#define GPIOH_25_CLEAR	 (		1 << 25)
+#define GPIOH_26_CLEAR	 (		1 << 26)
+#define GPIOH_27_CLEAR	 (		1 << 27)
+#define GPIOH_28_CLEAR	 (		1 << 28)
+#define GPIOH_29_CLEAR	 (		1 << 29)
+#define GPIOH_30_CLEAR	 (		1 << 30)
+#define GPIOH_31_CLEAR	 (		1 << 31)
+
+
+/*  GPIO LOW Bank Bit Registers*/
+#define GPIOL_OUTPUT_VALUE		 (		GPIO_BASE + 0x00)
+#define GPIOL_OUTPUT_ENABLE		 (		GPIO_BASE + 0x04)
+#define GPIOL_OUT_OPENDRAIN		 (		GPIO_BASE + 0x08)
+#define GPIOL_OUTPUT_INVERT_ENABLE	 (	GPIO_BASE + 0x0C)
+#define GPIOL_OUT_AUX1_SELECT	 (		GPIO_BASE + 0x10)
+#define GPIOL_OUT_AUX2_SELECT	 (		GPIO_BASE + 0x14)
+#define GPIOL_PULLUP_ENABLE		 (		GPIO_BASE + 0x18)
+#define GPIOL_PULLDOWN_ENABLE	 (		GPIO_BASE + 0x1C)
+#define GPIOL_INPUT_ENABLE		 (		GPIO_BASE + 0x20)
+#define GPIOL_INPUT_INVERT_ENABLE	 (	GPIO_BASE + 0x24)
+#define GPIOL_IN_FILTER_ENABLE	 (		GPIO_BASE + 0x28)
+#define GPIOL_IN_EVENTCOUNT_ENABLE	 (	GPIO_BASE + 0x2C)
+#define GPIOL_READ_BACK			 (		GPIO_BASE + 0x30)
+#define GPIOL_IN_AUX1_SELECT	 (		GPIO_BASE + 0x34)
+#define GPIOL_EVENTS_ENABLE		 (		GPIO_BASE + 0x38)
+#define GPIOL_LOCK_ENABLE		 (		GPIO_BASE + 0x3C)
+#define GPIOL_IN_POSEDGE_ENABLE	 (		GPIO_BASE + 0x40)
+#define GPIOL_IN_NEGEDGE_ENABLE	 (		GPIO_BASE + 0x44)
+#define GPIOL_IN_POSEDGE_STATUS	 (		GPIO_BASE + 0x48)
+#define GPIOL_IN_NEGEDGE_STATUS	 (		GPIO_BASE + 0x4C)
+
+/*  GPIO  High Bank Bit Registers*/
+#define GPIOH_OUTPUT_VALUE		 (		GPIO_BASE + 0x80)
+#define GPIOH_OUTPUT_ENABLE		 (		GPIO_BASE + 0x84)
+#define GPIOH_OUT_OPENDRAIN		 (		GPIO_BASE + 0x88)
+#define GPIOH_OUTPUT_INVERT_ENABLE	 (	GPIO_BASE + 0x8C)
+#define GPIOH_OUT_AUX1_SELECT	 (		GPIO_BASE + 0x90)
+#define GPIOH_OUT_AUX2_SELECT	 (		GPIO_BASE + 0x94)
+#define GPIOH_PULLUP_ENABLE		 (		GPIO_BASE + 0x98)
+#define GPIOH_PULLDOWN_ENABLE	 (		GPIO_BASE + 0x9C)
+#define GPIOH_INPUT_ENABLE		 (		GPIO_BASE + 0x0A0)
+#define GPIOH_INPUT_INVERT_ENABLE	 (	GPIO_BASE + 0x0A4)
+#define GPIOH_IN_FILTER_ENABLE	 (		GPIO_BASE + 0x0A8)
+#define GPIOH_IN_EVENTCOUNT_ENABLE	 (	GPIO_BASE + 0x0AC)
+#define GPIOH_READ_BACK			 (		GPIO_BASE + 0x0B0)
+#define GPIOH_IN_AUX1_SELECT	 (		GPIO_BASE + 0x0B4)
+#define GPIOH_EVENTS_ENABLE		 (		GPIO_BASE + 0x0B8)
+#define GPIOH_LOCK_ENABLE		 (		GPIO_BASE + 0x0BC)
+#define GPIOH_IN_POSEDGE_ENABLE	 (		GPIO_BASE + 0x0C0)
+#define GPIOH_IN_NEGEDGE_ENABLE	 (		GPIO_BASE + 0x0C4)
+#define GPIOH_IN_POSEDGE_STATUS	 (		GPIO_BASE + 0x0C8)
+#define GPIOH_IN_NEGEDGE_STATUS	 (		GPIO_BASE + 0x0CC)
+
+/*  Input Conditioning Function Registers*/
+#define GPIO_00_FILTER_AMOUNT	 (		GPIO_BASE + 0x50)
+#define GPIO_00_FILTER_COUNT	 (		GPIO_BASE + 0x52)
+#define GPIO_00_EVENT_COUNT		 (		GPIO_BASE + 0x54)
+#define GPIO_00_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x56)
+#define GPIO_01_FILTER_AMOUNT	 (		GPIO_BASE + 0x58)
+#define GPIO_01_FILTER_COUNT	 (		GPIO_BASE + 0x5A)
+#define GPIO_01_EVENT_COUNT		 (		GPIO_BASE + 0x5C)
+#define GPIO_01_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x5E)
+#define GPIO_02_FILTER_AMOUNT	 (		GPIO_BASE + 0x60)
+#define GPIO_02_FILTER_COUNT	 (		GPIO_BASE + 0x62)
+#define GPIO_02_EVENT_COUNT		 (		GPIO_BASE + 0x64)
+#define GPIO_02_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x66)
+#define GPIO_03_FILTER_AMOUNT	 (		GPIO_BASE + 0x68)
+#define GPIO_03_FILTER_COUNT	 (		GPIO_BASE + 0x6A)
+#define GPIO_03_EVENT_COUNT		 (		GPIO_BASE + 0x6C)
+#define GPIO_03_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x6E)
+#define GPIO_04_FILTER_AMOUNT	 (		GPIO_BASE + 0x70)
+#define GPIO_04_FILTER_COUNT	 (		GPIO_BASE + 0x72)
+#define GPIO_04_EVENT_COUNT		 (		GPIO_BASE + 0x74)
+#define GPIO_04_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x76)
+#define GPIO_05_FILTER_AMOUNT	 (		GPIO_BASE + 0x78)
+#define GPIO_05_FILTER_COUNT	 (		GPIO_BASE + 0x7A)
+#define GPIO_05_EVENT_COUNT		 (		GPIO_BASE + 0x7C)
+#define GPIO_05_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x7E)
+#define GPIO_06_FILTER_AMOUNT	 (		GPIO_BASE + 0x0D0)
+#define GPIO_06_FILTER_COUNT	 (		GPIO_BASE + 0x0D2)
+#define GPIO_06_EVENT_COUNT		 (		GPIO_BASE + 0x0D4)
+#define GPIO_06_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x0D6)
+#define GPIO_07_FILTER_AMOUNT	 (		GPIO_BASE + 0x0D8)
+#define GPIO_07_FILTER_COUNT	 (		GPIO_BASE + 0x0DA)
+#define GPIO_07_EVENT_COUNT		 (		GPIO_BASE + 0x0DC)
+#define GPIO_07_EVENTCOMPARE_VALUE	 (	GPIO_BASE + 0x0DE)
+
+/*  R/W GPIO Interrupt &PME Mapper Registers*/
+#define GPIO_MAPPER_X		 (		GPIO_BASE + 0x0E0)
+#define GPIO_MAPPER_Y		 (		GPIO_BASE + 0x0E4)
+#define GPIO_MAPPER_Z		 (		GPIO_BASE + 0x0E8)
+#define GPIO_MAPPER_W		 (		GPIO_BASE + 0x0EC)
+#define GPIO_FE_SELECT_0	 (		GPIO_BASE + 0x0F0)
+#define GPIO_FE_SELECT_1	 (		GPIO_BASE + 0x0F1)
+#define GPIO_FE_SELECT_2	 (		GPIO_BASE + 0x0F2)
+#define GPIO_FE_SELECT_3	 (		GPIO_BASE + 0x0F3)
+#define GPIO_FE_SELECT_4	 (		GPIO_BASE + 0x0F4)
+#define GPIO_FE_SELECT_5	 (		GPIO_BASE + 0x0F5)
+#define GPIO_FE_SELECT_6	 (		GPIO_BASE + 0x0F6)
+#define GPIO_FE_SELECT_7	 (		GPIO_BASE + 0x0F7)
+
+/*  Event Counter Decrement Registers*/
+#define GPIOL_IN_EVENT_DECREMENT	 (	GPIO_BASE + 0x0F8)
+#define GPIOH_IN_EVENT_DECREMENT	 (	GPIO_BASE + 0x0FC)
+
+/*  This is for 286reset compatibility. 0xCange to mat0xc 5535 virtualized stuff.*/
+#define FUNC0		 (	0x90)
+
+
+/*  sworley, PMC register*/
+#define PM_SSD		 (	PMLogic_BASE + 0x00)
+#define PM_SCXA		 (	PMLogic_BASE + 0x04)
+#define PM_SCYA		 (	PMLogic_BASE + 0x08)
+#define PM_SODA		 (	PMLogic_BASE + 0x0C)
+#define PM_SCLK		 (	PMLogic_BASE + 0x10)
+#define PM_SED		 (	PMLogic_BASE + 0x14)
+#define PM_SCXD		 (	PMLogic_BASE + 0x18)
+#define PM_SCYD		 (	PMLogic_BASE + 0x1C)
+#define PM_SIDD		 (	PMLogic_BASE + 0x20)
+#define PM_WKD		 (	PMLogic_BASE + 0x30)
+#define PM_WKXD		 (	PMLogic_BASE + 0x34)
+#define PM_RD		 (	PMLogic_BASE + 0x38)
+#define PM_WKXA		 ( PMLogic_BASE + 0x3C)
+#define PM_FSD		 (	PMLogic_BASE + 0x40)
+#define PM_TSD		 (	PMLogic_BASE + 0x44)
+#define PM_PSD		 ( PMLogic_BASE + 0x48)
+#define PM_NWKD		 (	PMLogic_BASE + 0x4C)
+#define PM_AWKD		 (	PMLogic_BASE + 0x50)
+#define PM_SSC		 (	PMLogic_BASE + 0x54)
+
+
+/* FLASH device macros */
+#define FLASH_TYPE_NONE	0	/* No flash device installed */
+#define FLASH_TYPE_NAND 1	/* NAND device */
+#define FLASH_TYPE_NOR	2	/* NOR device */
+
+#define FLASH_IF_MEM	1	/* Memory or memory-mapped I/O interface for Flash device */
+#define FLASH_IF_IO	2	/* I/O interface for Flash device */
+
+/* Flash Memory Mask values */
+#define FLASH_MEM_DEFAULT	0x00000000
+#define FLASH_MEM_4K		0xFFFFF000
+#define FLASH_MEM_8K		0xFFFFE000
+#define FLASH_MEM_16K		0xFFFFC000
+#define FLASH_MEM_128K		0xFFFE0000
+#define FLASH_MEM_512K		0xFFFC0000
+#define FLASH_MEM_4M		0xFFC00000
+#define FLASH_MEM_8M		0xFF800000
+#define FLASH_MEM_16M		0xFF000000
+
+/* Flash IO Mask values */
+#define FLASH_IO_DEFAULT	0x00000000
+#define FLASH_IO_16B		0x0000FFF0
+#define FLASH_IO_32B		0x0000FFE0
+#define FLASH_IO_64B		0x0000FFC0
+#define FLASH_IO_128B		0x0000FF80
+#define FLASH_IO_256B		0x0000FF00
+
+
+
+#endif /* CPU_AMD_LXDEF_H */