This patch adds support for the AMD LX cpu.
There is one global change to pci_ids.h. The rest are changes for LX. I
ran abuild and it is ok. Not all artec design changes are included as
some of them would adversely affect other mainboards. Indrek will need
to test.
Signed-off-by: Ron Minnich
Signed-off-by: Indrek Kruusa, indrek.kruusa@artecdesign.ee, artec
design.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/include/cpu/amd/lxdef.h b/src/include/cpu/amd/lxdef.h
new file mode 100644
index 0000000..6f04dd9
--- /dev/null
+++ b/src/include/cpu/amd/lxdef.h
@@ -0,0 +1,1136 @@
+#ifndef CPU_AMD_LXDEF_H
+#define CPU_AMD_LXDEF_H
+#define CPU_ID_1_X 0x540 /* Stepping ID 1.x*/
+#define CPU_ID_2_0 0x551 /* Stepping ID 2.0*/
+#define CPU_ID_2_1 0x552 /* Stepping ID 2.1*/
+#define CPU_ID_2_2 0x553 /* Stepping ID 2.2*/
+
+#define CPU_REV_1_0 0x011
+#define CPU_REV_1_1 0x012
+#define CPU_REV_1_2 0x013
+#define CPU_REV_1_3 0x014
+#define CPU_REV_2_0 0x020
+#define CPU_REV_2_1 0x021
+#define CPU_REV_2_2 0x022
+#define CPU_REV_3_0 0x030
+/* GeodeLink Control Processor Registers, GLIU1, Port 3 */
+#define GLCP_CLK_DIS_DELAY 0x4c000008
+#define GLCP_PMCLKDISABLE 0x4c000009
+#define GLCP_CHIP_REVID 0x4c000017
+
+/* GLCP_SYS_RSTPLL, Upper 32 bits */
+#define GLCP_SYS_RSTPLL_MDIV_SHIFT 9
+#define GLCP_SYS_RSTPLL_VDIV_SHIFT 6
+#define GLCP_SYS_RSTPLL_FBDIV_SHIFT 0
+
+/* GLCP_SYS_RSTPLL, Lower 32 bits */
+#define GLCP_SYS_RSTPLL_SWFLAGS_SHIFT 26
+#define GLCP_SYS_RSTPLL_SWFLAGS_MASK (0x3f << 26)
+
+#define GLCP_SYS_RSTPLL_LOCKWAIT 24
+#define GLCP_SYS_RSTPLL_HOLDCOUNT 16
+#define GLCP_SYS_RSTPLL_BYPASS 15
+#define GLCP_SYS_RSTPLL_PD 14
+#define GLCP_SYS_RSTPLL_RESETPLL 13
+#define GLCP_SYS_RSTPLL_DDRMODE 10
+#define GLCP_SYS_RSTPLL_VA_SEMI_SYNC_MODE 9
+#define GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE 8
+#define GLCP_SYS_RSTPLL_CHIP_RESET 0
+
+/* MSR routing as follows*/
+/* MSB = 1 means not for CPU*/
+/* next 3 bits 1st port*/
+/* next3 bits next port if through an GLIU*/
+/* etc...*/
+
+/*Redcloud as follows.*/
+/* GLIU0*/
+/* port0 - GLIU0*/
+/* port1 - MC*/
+/* port2 - GLIU1*/
+/* port3 - CPU*/
+/* port4 - VG*/
+/* port5 - GP*/
+/* port6 - DF*/
+
+/* GLIU1*/
+/* port1 - GLIU0*/
+/* port3 - GLCP*/
+/* port4 - PCI*/
+/* port5 - FG*/
+
+
+/* start GX3 def, differences are marked with GX3 comment */
+
+#define GL0_GLIU0 0
+#define GL0_MC 1
+#define GL0_GLIU1 2
+#define GL0_CPU 3
+#define GL0_VG 4
+#define GL0_GP 5
+//#define GL0_DF 6 //GX3 no such thing as VP port
+
+#define GL1_GLIU0 1
+//GX3 VP port
+#define GL1_DF 2
+#define GL1_GLCP 3
+#define GL1_PCI 4
+#define GL1_VIP 5
+#define GL1_AES 6
+
+#define MSR_GLIU0 (GL0_GLIU0 << 29) + (1 << 28) /* 1000xxxx - To get on GeodeLink one bit has to be set */
+#define MSR_MC (GL0_MC << 29) /* 2000xxxx */
+#define MSR_GLIU1 (GL0_GLIU1 << 29) /* 4000xxxx */
+#define MSR_CPU (GL0_CPU << 32) /* 0000xxxx - this is not used for BIOS */ //GX3
+#define MSR_VG (GL0_VG << 29) /* 8000xxxx */
+#define MSR_GP (GL0_GP << 29) /* A000xxxx */
+//#define MSR_DF (GL0_DF << 29) /* C000xxxx */ //GX3 no such thing
+
+#define MSR_GLCP (GL1_GLCP << 26) + MSR_GLIU1 /* 4C00xxxx */
+#define MSR_PCI (GL1_PCI << 26) + MSR_GLIU1 /* 5000xxxx */
+//#define MSR_FG (GL1_FG << 26) + MSR_GLIU1 /* 5400xxxx */ //GX3: no such thing
+#define MSR_VIP ((GL1_VIP << 26) + MSR_GLIU1) /* 5400xxxx */
+#define MSR_AES ((GL1_AES << 26) + MSR_GLIU1) /* 5800xxxx */
+/* South Bridge*/
+#define SB_PORT 2 /* port of the SouthBridge */
+#define MSR_SB ((SB_PORT << 23) + MSR_PCI) /* 5100xxxx - address to the SouthBridge*/
+#define SB_SHIFT 20 /* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift.*/
+
+
+/**/
+/*GeodeLink Interface Unit 0 (GLIU0) port0*/
+/**/
+
+#define GLIU0_GLD_MSR_CAP (MSR_GLIU0 + 0x2000)
+#define GLIU0_GLD_MSR_PM (MSR_GLIU0 + 0x2004)
+
+#define GLIU0_DESC_BASE (MSR_GLIU0 + 0x20)
+#define GLIU0_CAP (MSR_GLIU0 + 0x86)
+#define GLIU0_GLD_MSR_COH (MSR_GLIU0 + 0x80)
+
+
+/**/
+/* Memory Controller GLIU0 port 1*/
+/**/
+#define MC_GLD_MSR_CAP (MSR_MC + 0x2000)
+#define MC_GLD_MSR_PM (MSR_MC + 0x2004)
+
+#define MC_CF07_DATA (MSR_MC + 0x18)
+
+#define CF07_UPPER_D1_SZ_SHIFT 28
+#define CF07_UPPER_D1_MB_SHIFT 24
+#define CF07_UPPER_D1_CB_SHIFT 20
+#define CF07_UPPER_D1_PSZ_SHIFT 16
+#define CF07_UPPER_D0_SZ_SHIFT 12
+#define CF07_UPPER_D0_MB_SHIFT 8
+#define CF07_UPPER_D0_CB_SHIFT 4
+#define CF07_UPPER_D0_PSZ_SHIFT 0
+
+#define CF07_LOWER_REF_INT_SHIFT 8
+#define CF07_LOWER_LOAD_MODE_DDR_SET (1 << 28)
+#define CF07_LOWER_LOAD_MODE_DLL_RESET (1 << 27)
+#define CF07_LOWER_EMR_QFC_SET (1 << 26)
+#define CF07_LOWER_EMR_DRV_SET (1 << 25)
+#define CF07_LOWER_REF_TEST_SET (1 << 3)
+#define CF07_LOWER_PROG_DRAM_SET (1 << 0)
+
+
+#define MC_CF8F_DATA (MSR_MC + 0x19)
+
+#define CF8F_UPPER_XOR_BS_SHIFT 19
+#define CF8F_UPPER_XOR_MB0_SHIFT 18
+#define CF8F_UPPER_XOR_BA1_SHIFT 17
+#define CF8F_UPPER_XOR_BA0_SHIFT 16
+#define CF8F_UPPER_REORDER_DIS_SET (1 << 8)
+#define CF8F_UPPER_REG_DIMM_SHIFT 4
+#define CF8F_LOWER_CAS_LAT_SHIFT 28
+#define CF8F_LOWER_REF2ACT_SHIFT 24
+#define CF8F_LOWER_ACT2PRE_SHIFT 20
+#define CF8F_LOWER_PRE2ACT_SHIFT 16
+#define CF8F_LOWER_ACT2CMD_SHIFT 12
+#define CF8F_LOWER_ACT2ACT_SHIFT 8
+#define CF8F_UPPER_32BIT_SET (1 << 5)
+#define CF8F_UPPER_HOI_LOI_SET (1 << 1)
+
+#define MC_CF1017_DATA (MSR_MC + 0x1A)
+
+#define CF1017_LOWER_PM1_UP_DLY_SET (1 << 8)
+#define CF1017_LOWER_WR2DAT_SHIFT 0
+
+#define MC_CFCLK_DBUG (MSR_MC + 0x1D)
+
+#define CFCLK_UPPER_MTST_B2B_DIS_SET (1 << 2)
+#define CFCLK_UPPER_MTST_DQS_EN_SET (1 << 1)
+#define CFCLK_UPPER_MTEST_EN_SET (1 << 0)
+
+#define CFCLK_LOWER_MASK_CKE_SET1 (1 << 9)
+#define CFCLK_LOWER_MASK_CKE_SET0 (1 << 8)
+#define CFCLK_LOWER_SDCLK_SET (0x0F << 0)
+
+#define MC_CF_RDSYNC (MSR_MC + 0x1F)
+
+
+/**/
+/* GLIU1 GLIU0 port2*/
+/**/
+#define GLIU1_GLD_MSR_CAP (MSR_GLIU1 + 0x2000)
+#define GLIU1_GLD_MSR_PM (MSR_GLIU1 + 0x2004)
+
+#define GLIU1_GLD_MSR_COH (MSR_GLIU1 + 0x80)
+
+
+/**/
+/* CPU ; does not need routing instructions since we are executing there.*/
+/**/
+#define CPU_GLD_MSR_CAP 0x2000
+#define CPU_GLD_MSR_CONFIG 0x2001
+#define CPU_GLD_MSR_PM 0x2004
+
+#define CPU_GLD_MSR_DIAG 0x2005
+#define DIAG_SEL1_MODE_SHIFT 16
+#define DIAG_SEL1_SET (1 << 31)
+#define DIAG_SEL0__MODE_SHIFT 0
+#define DIAG_SET0_SET (1 << 15)
+
+#define CPU_PF_BTB_CONF 0x1100
+#define BTB_ENABLE_SET (1 << 0)
+#define RETURN_STACK_ENABLE_SET (1 << 4)
+#define CPU_PF_BTBRMA_BIST 0x110C
+
+#define CPU_XC_CONFIG 0x1210
+#define XC_CONFIG_SUSP_ON_HLT (1 << 0)
+#define CPU_ID_CONFIG 0x1250
+#define ID_CONFIG_SERIAL_SET (1 << 0)
+
+#define CPU_AC_MSR 0x1301
+#define CPU_EX_BIST 0x1428
+
+/*IM*/
+#define CPU_IM_CONFIG 0x1700
+#define IM_CONFIG_LOWER_ICD_SET (1 << 8)
+#define IM_CONFIG_LOWER_QWT_SET (1 << 20)
+#define CPU_IC_INDEX 0x1710
+#define CPU_IC_DATA 0x1711
+#define CPU_IC_TAG 0x1712
+#define CPU_IC_TAG_I 0x1713
+#define CPU_ITB_INDEX 0x1720
+#define CPU_ITB_LRU 0x1721
+#define CPU_ITB_ENTRY 0x1722
+#define CPU_ITB_ENTRY_I 0x1723
+#define CPU_IM_BIST_TAG 0x1730
+#define CPU_IM_BIST_DATA 0x1731
+
+
+/* various CPU MSRs */
+#define CPU_DM_CONFIG0 0x1800
+#define DM_CONFIG0_UPPER_WSREQ_SHIFT 12
+#define DM_CONFIG0_LOWER_DCDIS_SET (1<<8)
+#define DM_CONFIG0_LOWER_WBINVD_SET (1<<5)
+#define DM_CONFIG0_LOWER_MISSER_SET (1<<1)
+/* configuration MSRs */
+#define CPU_RCONF_DEFAULT 0x1808
+#define RCONF_DEFAULT_UPPER_ROMRC_SHIFT 24
+#define RCONF_DEFAULT_UPPER_ROMBASE_SHIFT 4
+#define RCONF_DEFAULT_UPPER_DEVRC_HI_SHIFT 0
+#define RCONF_DEFAULT_LOWER_DEVRC_LOW_SHIFT 28
+#define RCONF_DEFAULT_LOWER_SYSTOP_SHIFT 8
+#define RCONF_DEFAULT_LOWER_SYSRC_SHIFT 0
+
+#define CPU_RCONF_BYPASS 0x180A
+#define CPU_RCONF_A0_BF 0x180B
+#define CPU_RCONF_C0_DF 0x180C
+#define CPU_RCONF_E0_FF 0x180D
+
+#define CPU_RCONF_SMM 0x180E
+#define RCONF_SMM_UPPER_SMMTOP_SHIFT 12
+#define RCONF_SMM_UPPER_RCSMM_SHIFT 0
+#define RCONF_SMM_LOWER_SMMBASE_SHIFT 12
+#define RCONF_SMM_LOWER_RCNORM_SHIFT 0
+#define RCONF_SMM_LOWER_EN_SET (1<<8)
+
+#define CPU_RCONF_DMM 0x180F
+#define RCONF_DMM_UPPER_DMMTOP_SHIFT 12
+#define RCONF_DMM_UPPER_RCDMM_SHIFT 0
+#define RCONF_DMM_LOWER_DMMBASE_SHIFT 12
+#define RCONF_DMM_LOWER_RCNORM_SHIFT 0
+#define RCONF_DMM_LOWER_EN_SET (1<<8)
+
+#define CPU_RCONF0 0x1810
+#define CPU_RCONF1 0x1811
+#define CPU_RCONF2 0x1812
+#define CPU_RCONF3 0x1813
+#define CPU_RCONF4 0x1814
+#define CPU_RCONF5 0x1815
+#define CPU_RCONF6 0x1816
+#define CPU_RCONF7 0x1817
+#define CPU_CR1_MSR 0x1881
+#define CPU_CR2_MSR 0x1882
+#define CPU_CR3_MSR 0x1883
+#define CPU_CR4_MSR 0x1884
+#define CPU_DC_INDEX 0x1890
+#define CPU_DC_DATA 0x1891
+#define CPU_DC_TAG 0x1892
+#define CPU_DC_TAG_I 0x1893
+#define CPU_SNOOP 0x1894
+#define CPU_DTB_INDEX 0x1898
+#define CPU_DTB_LRU 0x1899
+#define CPU_DTB_ENTRY 0x189A
+#define CPU_DTB_ENTRY_I 0x189B
+#define CPU_L2TB_INDEX 0x189C
+#define CPU_L2TB_LRU 0x189D
+#define CPU_L2TB_ENTRY 0x189E
+#define CPU_L2TB_ENTRY_I 0x189F
+#define CPU_DM_BIST 0x18C0
+ /* SMM*/
+#define CPU_AC_SMM_CTL 0x1301
+#define SMM_NMI_EN_SET (1<<0)
+#define SMM_SUSP_EN_SET (1<<1)
+#define NEST_SMI_EN_SET (1<<2)
+#define SMM_INST_EN_SET (1<<3)
+#define INTL_SMI_EN_SET (1<<4)
+#define EXTL_SMI_EN_SET (1<<5)
+
+#define CPU_FPU_MSR_MODE 0x1A00
+#define FPU_IE_SET (1<<0)
+
+#define CPU_FP_UROM_BIST 0x1A03
+
+#define CPU_BC_CONF_0 0x1900
+#define TSC_SUSP_SET (1<<5)
+#define SUSP_EN_SET (1<<12)
+
+ /**/
+ /* VG GLIU0 port4*/
+ /**/
+
+#define VG_GLD_MSR_CAP (MSR_VG + 0x2000)
+#define VG_GLD_MSR_CONFIG (MSR_VG + 0x2001)
+#define VG_GLD_MSR_PM (MSR_VG + 0x2004)
+
+#define GP_GLD_MSR_CAP (MSR_GP + 0x2000)
+#define GP_GLD_MSR_CONFIG (MSR_GP + 0x2001)
+#define GP_GLD_MSR_PM (MSR_GP + 0x2004)
+
+
+
+/**/
+/* DF GLIU0 port6*/
+/**/
+/*
+#define DF_GLD_MSR_CAP (MSR_DF + 0x2000)
+#define DF_GLD_MSR_MASTER_CONF (MSR_DF + 0x2001)
+#define DF_LOWER_LCD_SHIFT 6
+#define DF_GLD_MSR_PM (MSR_DF + 0x2004)
+
+*/
+
+/**/
+/* GeodeLink Control Processor GLIU1 port3*/
+/**/
+#define GLCP_GLD_MSR_CAP (MSR_GLCP + 0x2000)
+#define GLCP_GLD_MSR_CONF (MSR_GLCP + 0x2001)
+#define GLCP_GLD_MSR_PM (MSR_GLCP + 0x2004)
+
+#define GLCP_DELAY_CONTROLS (MSR_GLCP + 0x0F)
+
+#define GLCP_SYS_RSTPLL (MSR_GLCP +0x14 /* R/W*/)
+#define RSTPLL_UPPER_MDIV_SHIFT 9
+#define RSTPLL_UPPER_VDIV_SHIFT 6
+#define RSTPLL_UPPER_FBDIV_SHIFT 0
+
+#define RSTPLL_LOWER_SWFLAGS_SHIFT 26
+#define RSTPLL_LOWER_SWFLAGS_MASK (0x3F<<RSTPLL_LOWER_SWFLAGS_SHIFT)
+
+#define RSTPPL_LOWER_HOLD_COUNT_SHIFT 16
+#define RSTPPL_LOWER_BYPASS_SHIFT 15
+#define RSTPPL_LOWER_TST_SHIFT 11
+#define RSTPPL_LOWER_SDRMODE_SHIFT 10
+#define RSTPPL_LOWER_BOOTSTRAP_SHIFT 4
+
+#define RSTPPL_LOWER_LOCK_SET (1<<25)
+#define RSTPPL_LOWER_LOCKWAIT_SET (1<<24)
+#define RSTPPL_LOWER_BYPASS_SET (1<<15)
+#define RSTPPL_LOWER_PD_SET (1<<14)
+#define RSTPPL_LOWER_PLL_RESET_SET (1<<13)
+#define RSTPPL_LOWER_SDRMODE_SET (1<<10)
+#define RSTPPL_LOWER_CPU_SEMI_SYNC_SET (1<<9)
+#define RSTPPL_LOWER_PCI_SEMI_SYNC_SET (1<<8)
+#define RSTPPL_LOWER_CHIP_RESET_SET (1<<0)
+
+#define GLCP_DOTPLL (MSR_GLCP + 0x15 /* R/W*/)
+#define DOTPPL_LOWER_PD_SET (1<<14)
+
+
+/**/
+/* GLIU1 port 4*/
+/**/
+#define GLPCI_GLD_MSR_CAP (MSR_PCI + 0x2000)
+#define GLPCI_GLD_MSR_CONFIG (MSR_PCI + 0x2001)
+#define GLPCI_GLD_MSR_PM (MSR_PCI + 0x2004)
+
+#define GLPCI_CTRL (MSR_PCI + 0x2010)
+#define GLPCI_CTRL_UPPER_FTH_SHIFT 28
+#define GLPCI_CTRL_UPPER_RTH_SHIFT 24
+#define GLPCI_CTRL_UPPER_SBRTH_SHIFT 20
+#define GLPCI_CTRL_UPPER_DTL_SHIFT 14
+#define GLPCI_CTRL_UPPER_WTO_SHIFT 11
+#define GLPCI_CTRL_UPPER_LAT_SHIFT 3
+#define GLPCI_CTRL_UPPER_ILTO_SHIFT 8
+#define GLPCI_CTRL_LOWER_IRFT_SHIFT 18
+#define GLPCI_CTRL_LOWER_IRFC_SHIFT 16
+#define GLPCI_CTRL_LOWER_ER_SET (1<<11)
+#define GLPCI_CTRL_LOWER_LDE_SET (1<<9)
+#define GLPCI_CTRL_LOWER_OWC_SET (1<<4)
+#define GLPCI_CTRL_LOWER_IWC_SET (1<<3)
+#define GLPCI_CTRL_LOWER_PCD_SET (1<<2)
+#define GLPCI_CTRL_LOWER_ME_SET (1<<0)
+
+#define GLPCI_ARB (MSR_PCI + 0x2011)
+#define GLPCI_ARB_UPPER_BM1_SET (1<<17)
+#define GLPCI_ARB_UPPER_BM0_SET (1<<16)
+#define GLPCI_ARB_UPPER_CPRE_SET (1<<15)
+#define GLPCI_ARB_UPPER_PRE2_SET (1<<10)
+#define GLPCI_ARB_UPPER_PRE1_SET (1<<9)
+#define GLPCI_ARB_UPPER_PRE0_SET (1<<8)
+#define GLPCI_ARB_UPPER_CRME_SET (1<<7)
+#define GLPCI_ARB_UPPER_RME2_SET (1<<2)
+#define GLPCI_ARB_UPPER_RME1_SET (1<<1)
+#define GLPCI_ARB_UPPER_RME0_SET (1<<0)
+#define GLPCI_ARB_LOWER_PRCM_SHIFT 24
+#define GLPCI_ARB_LOWER_FPVEC_SHIFT 16
+#define GLPCI_ARB_LOWER_RMT_SHIFT 6
+#define GLPCI_ARB_LOWER_IIE_SET (1<<8)
+#define GLPCI_ARB_LOWER_PARK_SET (1<<0)
+
+#define GLPCI_REN (MSR_PCI + 0x2014)
+#define GLPCI_A0_BF (MSR_PCI + 0x2015)
+#define GLPCI_C0_DF (MSR_PCI + 0x2016)
+#define GLPCI_E0_FF (MSR_PCI + 0x2017)
+#define GLPCI_RC0 (MSR_PCI + 0x2018)
+#define GLPCI_RC1 (MSR_PCI + 0x2019)
+#define GLPCI_RC2 (MSR_PCI + 0x201A)
+#define GLPCI_RC3 (MSR_PCI + 0x201B)
+#define GLPCI_RC4 (MSR_PCI + 0x201C)
+#define GLPCI_RC_UPPER_TOP_SHIFT 12
+#define GLPCI_RC_LOWER_BASE_SHIFT 12
+#define GLPCI_RC_LOWER_EN_SET (1<<8)
+#define GLPCI_RC_LOWER_PF_SET (1<<5)
+#define GLPCI_RC_LOWER_WC_SET (1<<4)
+#define GLPCI_RC_LOWER_WP_SET (1<<2)
+#define GLPCI_RC_LOWER_CD_SET (1<<0)
+#define GLPCI_EXT_MSR (MSR_PCI + 0x201E)
+#define GLPCI_SPARE (MSR_PCI + 0x201F)
+#define GLPCI_SPARE_LOWER_AILTO_SET (1<<6)
+#define GLPCI_SPARE_LOWER_PPD_SET (1<<5)
+#define GLPCI_SPARE_LOWER_PPC_SET (1<<4)
+#define GLPCI_SPARE_LOWER_MPC_SET (1<<3)
+#define GLPCI_SPARE_LOWER_MME_SET (1<<2)
+#define GLPCI_SPARE_LOWER_NSE_SET (1<<1)
+#define GLPCI_SPARE_LOWER_SUPO_SET (1<<0)
+
+
+/**/
+/* FooGlue GLIU1 port 5*/
+/**/
+/* GX3 not needed?
+#define FG_GLD_MSR_CAP (MSR_FG + 0x2000)
+#define FG_GLD_MSR_PM (MSR_FG + 0x2004)
+*/
+/* VIP GLIU1 port 5*/
+/* */
+#define VIP_GLD_MSR_CAP (MSR_VIP + 0x2000)
+#define VIP_GLD_MSR_CONFIG (MSR_VIP + 0x2001)
+#define VIP_GLD_MSR_PM (MSR_VIP + 0x2004)
+#define VIP_BIST (MSR_VIP + 0x2005)
+/* */
+/* AES GLIU1 port 6*/
+/* */
+#define AES_GLD_MSR_CAP (MSR_AES + 0x2000)
+#define AES_GLD_MSR_CONFIG (MSR_AES + 0x2001)
+#define AES_GLD_MSR_PM (MSR_AES + 0x2004)
+#define AES_CONTROL (MSR_AES + 0x2006)
+/* more fun stuff */
+#define BM 1 /* Base Mask - map power of 2 size aligned region*/
+#define BMO 2 /* BM with an offset*/
+#define R 3 /* Range - 4k range minimum*/
+#define RO 4 /* R with offset*/
+#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/
+#define BMIO 6 /* Base Mask IO*/
+#define SCIO 7 /* Swiss 0xCeese IO*/
+#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/
+#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/
+#define BMO_SMM 10 /* Specail marker for SMM*/
+#define BM_SMM 11 /* Specail marker for SMM*/
+#define BMO_DMM 12 /* Specail marker for DMM*/
+#define BM_DMM 13 /* Specail marker for DMM*/
+#define RO_FB 14 /* special for Frame buffer.*/
+#define R_FB 15 /* special for FB.*/
+#define OTHER 0x0FE /* Special marker for other*/
+#define GL_END 0x0FF /* end*/
+
+#define MSR_GL0 (GL1_GLIU0 << 29)
+
+/* Set up desc addresses from 20 - 3f*/
+/* This is chip specific!*/
+#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM*/
+#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM*/
+#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/
+#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/
+#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO*/
+#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO*/
+
+#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM*/
+#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM*/
+#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/
+#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/
+#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM*/
+#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM*/
+#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/
+
+/* definitions that are "once you are mostly up, start VSA" type things */
+#define SMM_OFFSET (0x40400000)
+#define SMM_SIZE (128) /* changed SMM_SIZE from 256 KB to 128 KB */
+#define DMM_OFFSET (0x0C0000000)
+#define DMM_SIZE (128)
+#define FB_OFFSET (0x41000000)
+#define PCI_MEM_TOP (0x0EFFFFFFF) // Top of PCI mem allocation region
+#define PCI_IO_TOP (0x0EFFF) // Top of PCI I/O allocation region
+#define END_OPTIONROM_SPACE (0x0DFFF) // E0000 is reserved for SystemROMs.
+
+
+#define CS5535_IDSEL (0x02000000) // IDSEL = AD25, device #15
+#define CHIPSET_DEV_NUM (15)
+#define IDSEL_BASE (11) // bit 11 = device 1
+
+
+/* standard AMD post definitions -- might as well use them. */
+#define POST_Output_Port (0x080) /* port to write post codes to*/
+
+#define POST_preSioInit (0x000) /* geode.asm*/
+#define POST_clockInit (0x001) /* geode.asm*/
+#define POST_CPURegInit (0x002) /* geode.asm*/
+#define POST_UNREAL (0x003) /* geode.asm*/
+#define POST_CPUMemRegInit (0x004) /* geode.asm*/
+#define POST_CPUTest (0x005) /* geode.asm*/
+#define POST_memSetup (0x006) /* geode.asm*/
+#define POST_memSetUpStack (0x007) /* geode.asm*/
+#define POST_memTest (0x008) /* geode.asm*/
+#define POST_shadowRom (0x009) /* geode.asm*/
+#define POST_memRAMoptimize (0x00A) /* geode.asm*/
+#define POST_cacheInit (0x00B) /* geode.asm*/
+#define POST_northBridgeInit (0x00C) /* geode.asm*/
+#define POST_chipsetInit (0x00D) /* geode.asm*/
+#define POST_sioTest (0x00E) /* geode.asm*/
+#define POST_pcATjunk (0x00F) /* geode.asm*/
+
+
+#define POST_intTable (0x010) /* geode.asm*/
+#define POST_memInfo (0x011) /* geode.asm*/
+#define POST_romCopy (0x012) /* geode.asm*/
+#define POST_PLLCheck (0x013) /* geode.asm*/
+#define POST_keyboardInit (0x014) /* geode.asm*/
+#define POST_cpuCacheOff (0x015) /* geode.asm*/
+#define POST_BDAInit (0x016) /* geode.asm*/
+#define POST_pciScan (0x017) /* geode.asm*/
+#define POST_optionRomInit (0x018) /* geode.asm*/
+#define POST_ResetLimits (0x019) /* geode.asm*/
+#define POST_summary_screen (0x01A) /* geode.asm*/
+#define POST_Boot (0x01B) /* geode.asm*/
+#define POST_SystemPreInit (0x01C) /* geode.asm*/
+#define POST_ClearRebootFlag (0x01D) /* geode.asm*/
+#define POST_GLIUInit (0x01E) /* geode.asm*/
+#define POST_BootFailed (0x01F) /* geode.asm*/
+
+
+#define POST_CPU_ID (0x020) /* cpucpuid.asm*/
+#define POST_COUNTERBROKEN (0x021) /* pllinit.asm*/
+#define POST_DIFF_DIMMS (0x022) /* pllinit.asm*/
+#define POST_WIGGLE_MEM_LINES (0x023) /* pllinit.asm*/
+#define POST_NO_GLIU_DESC (0x024) /* pllinit.asm*/
+#define POST_CPU_LCD_CHECK (0x025) /* pllinit.asm*/
+#define POST_CPU_LCD_PASS (0x026) /* pllinit.asm*/
+#define POST_CPU_LCD_FAIL (0x027) /* pllinit.asm*/
+#define POST_CPU_STEPPING (0x028) /* cpucpuid.asm*/
+#define POST_CPU_DM_BIST_FAILURE (0x029) /* gx2reg.asm*/
+#define POST_CPU_FLAGS (0x02A) /* cpucpuid.asm*/
+#define POST_CHIPSET_ID (0x02b) /* chipset.asm*/
+#define POST_CHIPSET_ID_PASS (0x02c) /* chipset.asm*/
+#define POST_CHIPSET_ID_FAIL (0x02d) /* chipset.asm*/
+#define POST_CPU_ID_GOOD (0x02E) /* cpucpuid.asm*/
+#define POST_CPU_ID_FAIL (0x02F) /* cpucpuid.asm*/
+
+
+
+/* PCI config*/
+#define P80_PCICFG (0x030) /* pcispace.asm*/
+
+
+/* PCI io*/
+#define P80_PCIIO (0x040) /* pcispace.asm*/
+
+
+/* PCI memory*/
+#define P80_PCIMEM (0x050) /* pcispace.asm*/
+
+
+/* SIO*/
+#define P80_SIO (0x060) /* *sio.asm*/
+
+/* Memory Setp*/
+#define P80_MEM_SETUP (0x070) /* docboot meminit*/
+#define POST_MEM_SETUP (0x070) /* memsize.asm*/
+#define ERROR_32BIT_DIMMS (0x071) /* memsize.asm*/
+#define POST_MEM_SETUP2 (0x072) /* memsize.asm*/
+#define POST_MEM_SETUP3 (0x073) /* memsize.asm*/
+#define POST_MEM_SETUP4 (0x074) /* memsize.asm*/
+#define POST_MEM_SETUP5 (0x075) /* memsize.asm*/
+#define POST_MEM_ENABLE (0x076) /* memsize.asm*/
+#define ERROR_NO_DIMMS (0x077) /* memsize.asm*/
+#define ERROR_DIFF_DIMMS (0x078) /* memsize.asm*/
+#define ERROR_BAD_LATENCY (0x079) /* memsize.asm*/
+#define ERROR_SET_PAGE (0x07a) /* memsize.asm*/
+#define ERROR_DENSITY_DIMM (0x07b) /* memsize.asm*/
+#define ERROR_UNSUPPORTED_DIMM (0x07c) /* memsize.asm*/
+#define ERROR_BANK_SET (0x07d) /* memsize.asm*/
+#define POST_MEM_SETUP_GOOD (0x07E) /* memsize.asm*/
+#define POST_MEM_SETUP_FAIL (0x07F) /* memsize.asm*/
+
+
+#define POST_UserPreInit (0x080) /* geode.asm*/
+#define POST_UserPostInit (0x081) /* geode.asm*/
+#define POST_Equipment_check (0x082) /* geode.asm*/
+#define POST_InitNVRAMBX (0x083) /* geode.asm*/
+#define POST_NoPIRTable (0x084) /* pci.asm*/
+#define POST_ChipsetFingerPrintPass (0x085) /* prechipsetinit*/
+#define POST_ChipsetFingerPrintFail (0x086) /* prechipsetinit*/
+#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) /* gx2reg.asm*/
+#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) /* gx2reg.asm*/
+#define POST_CPU_FPU_BIST_FAILURE (0x089) /* gx2reg.asm*/
+#define POST_CPU_BTB_BIST_FAILURE (0x08a) /* gx2reg.asm*/
+#define POST_CPU_EX_BIST_FAILURE (0x08b) /* gx2reg.asm*/
+#define POST_Chipset_PI_Test_Fail (0x08c) /* prechipsetinit*/
+#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) /* prechipsetinit*/
+#define POST_BIT_CLK_Fail (0x08e) /* Hawk geode.asm override*/
+
+
+#define POST_STACK_SETUP (0x090) /* memstack.asm*/
+#define POST_CPU_PF_BIST_FAILURE (0x091) /* gx2reg.asm*/
+#define POST_CPU_L2_BIST_FAILURE (0x092) /* gx2reg.asm*/
+#define POST_CPU_GLCP_BIST_FAILURE (0x093) /* gx2reg.asm*/
+#define POST_CPU_DF_BIST_FAILURE (0x094) /* gx2reg.asm*/
+#define POST_CPU_VG_BIST_FAILURE (0x095) /* gx2reg.asm*/
+#define POST_CPU_VIP_BIST_FAILURE (0x096) /* gx2reg.asm*/
+#define POST_STACK_SETUP_PASS (0x09E) /* memstack.asm*/
+#define POST_STACK_SETUP_FAIL (0x09F) /* memstack.asm*/
+
+
+#define POST_PLL_INIT (0x0A0) /* pllinit.asm*/
+#define POST_PLL_MANUAL (0x0A1) /* pllinit.asm*/
+#define POST_PLL_STRAP (0x0A2) /* pllinit.asm*/
+#define POST_PLL_RESET_FAIL (0x0A3) /* pllinit.asm*/
+#define POST_PLL_PCI_FAIL (0x0A4) /* pllinit.asm*/
+#define POST_PLL_MEM_FAIL (0x0A5) /* pllinit.asm*/
+#define POST_PLL_CPU_VER_FAIL (0x0A6) /* pllinit.asm*/
+
+
+#define POST_MEM_TESTMEM (0x0B0) /* memtest.asm*/
+#define POST_MEM_TESTMEM1 (0x0B1) /* memtest.asm*/
+#define POST_MEM_TESTMEM2 (0x0B2) /* memtest.asm*/
+#define POST_MEM_TESTMEM3 (0x0B3) /* memtest.asm*/
+#define POST_MEM_TESTMEM4 (0x0B4) /* memtest.asm*/
+#define POST_MEM_TESTMEM_PASS (0x0BE) /* memtest.asm*/
+#define POST_MEM_TESTMEM_FAIL (0x0BF) /* memtest.asm*/
+
+
+#define POST_SECUROM_SECBOOT_START (0x0C0) /* secstart.asm*/
+#define POST_SECUROM_BOOTSRCSETUP (0x0C1) /* secstart.asm*/
+#define POST_SECUROM_REMAP_FAIL (0x0C2) /* secstart.asm*/
+#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) /* secstart.asm*/
+#define POST_SECUROM_DCACHESETUP (0x0C4) /* secstart.asm*/
+#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) /* secstart.asm*/
+#define POST_SECUROM_ICACHESETUP (0x0C6) /* secstart.asm*/
+#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) /* secstart.asm*/
+#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) /* secstart.asm*/
+#define POST_SECUROM_PLATFORMSETUP (0x0C9) /* secstart.asm*/
+#define POST_SECUROM_SIGCHECKBIOS (0x0CA) /* secstart.asm*/
+#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) /* secstart.asm*/
+#define POST_SECUROM_PASS (0x0CC) /* secstart.asm*/
+#define POST_SECUROM_FAIL (0x0CD) /* secstart.asm*/
+
+#define POST_RCONFInitError (0x0CE) /* cache.asm*/
+#define POST_CacheInitError (0x0CF) /* cache.asm*/
+
+
+#define POST_ROM_PREUNCOMPRESS (0x0D0) /* rominit.asm*/
+#define POST_ROM_UNCOMPRESS (0x0D1) /* rominit.asm*/
+#define POST_ROM_SMM_INIT (0x0D2) /* rominit.asm*/
+#define POST_ROM_VID_BIOS (0x0D3) /* rominit.asm*/
+#define POST_ROM_LCDINIT (0x0D4) /* rominit.asm*/
+#define POST_ROM_SPLASH (0x0D5) /* rominit.asm*/
+#define POST_ROM_HDDINIT (0x0D6) /* rominit.asm*/
+#define POST_ROM_SYS_INIT (0x0D7) /* rominit.asm*/
+#define POST_ROM_DMM_INIT (0x0D8) /* rominit.asm*/
+#define POST_ROM_TVINIT (0x0D9) /* rominit.asm*/
+#define POST_ROM_POSTUNCOMPRESS (0x0DE)
+
+
+#define P80_CHIPSET_INIT (0x0E0) /* chipset.asm*/
+#define POST_PreChipsetInit (0x0E1) /* geode.asm*/
+#define POST_LateChipsetInit (0x0E2) /* geode.asm*/
+#define POST_NORTHB_INIT (0x0E8) /* northb.asm*/
+
+
+#define POST_INTR_SEG_JUMP (0x0F0) /* vector.asm*/
+
+
+/* I don't mind if somebody decides this needs to be in a seperate file. I don't see much point
+ * in it, either.
+ * RGM
+ */
+#define Cx5535_ID ( 0x002A100B)
+#define Cx5536_ID ( 0x208F1022)
+
+/* Cs5535 as follows. */
+/* SB_GLIU*/
+/* port0 - GLIU*/
+/* port1 - GLPCI*/
+/* port2 - USB Controller #2*/
+/* port3 - ATA-5 Controller*/
+/* port4 - MDD*/
+/* port5 - AC97*/
+/* port6 - USB Controller #1*/
+/* port7 - GLCP*/
+
+
+/* SouthBridge Equates*/
+/* MSR_SB and SB_SHIFT are located in CPU.inc*/
+#define MSR_SB_GLIU ((9 << 14) + MSR_SB) /* 51024xxx or 510*xxxx - fake out just like GL0 on CPU. */
+#define MSR_SB_GLPCI (MSR_SB) /* 5100xxxx - don't go to the GLIU */
+#define MSR_SB_USB2 ((2 << SB_SHIFT) + MSR_SB) /* 5120xxxx */
+#define MSR_SB_ATA ((3 << SB_SHIFT) + MSR_SB) /* 5130xxxx */
+#define MSR_SB_MDD ((4 << SB_SHIFT) + MSR_SB) /* 5140xxxx, a.k.a. DIVIL = Diverse Integrated Logic device */
+#define MSR_SB_AC97 ((5 << SB_SHIFT) + MSR_SB) /* 5150xxxx */
+#define MSR_SB_USB1 ((6 << SB_SHIFT) + MSR_SB) /* 5160xxxx */
+#define MSR_SB_GLCP ((7 << SB_SHIFT) + MSR_SB) /* 5170xxxx */
+
+/* */
+/* GLIU*/
+/* */
+#define GLIU_SB_GLD_MSR_CAP ( MSR_SB_GLIU + 0x00)
+#define GLIU_SB_GLD_MSR_CONF ( MSR_SB_GLIU + 0x01)
+#define GLIU_SB_GLD_MSR_PM ( MSR_SB_GLIU + 0x04)
+
+/* */
+/* USB1*/
+/* */
+#define USB1_SB_GLD_MSR_CAP ( MSR_SB_USB1 + 0x00)
+#define USB1_SB_GLD_MSR_CONF ( MSR_SB_USB1 + 0x01)
+#define USB1_SB_GLD_MSR_PM ( MSR_SB_USB1 + 0x04)
+/* */
+/* USB2*/
+/* */
+#define USB2_SB_GLD_MSR_CAP ( MSR_SB_USB2 + 0x00)
+#define USB2_SB_GLD_MSR_CONF ( MSR_SB_USB2 + 0x01)
+#define USB2_SB_GLD_MSR_PM ( MSR_SB_USB2 + 0x04)
+
+
+/* */
+/* ATA*/
+/* */
+#define ATA_SB_GLD_MSR_CAP ( MSR_SB_ATA + 0x00)
+#define ATA_SB_GLD_MSR_CONF ( MSR_SB_ATA + 0x01)
+#define ATA_SB_GLD_MSR_ERR ( MSR_SB_ATA + 0x03)
+#define ATA_SB_GLD_MSR_PM ( MSR_SB_ATA + 0x04)
+
+/* */
+/* AC97*/
+/* */
+#define AC97_SB_GLD_MSR_CAP ( MSR_SB_AC97 + 0x00)
+#define AC97_SB_GLD_MSR_CONF ( MSR_SB_AC97 + 0x01)
+#define AC97_SB_GLD_MSR_PM ( MSR_SB_AC97 + 0x04)
+
+/* */
+/* GLPCI*/
+/* */
+#define GLPCI_SB_GLD_MSR_CAP ( MSR_SB_GLPCI + 0x00)
+#define GLPCI_SB_GLD_MSR_CONF ( MSR_SB_GLPCI + 0x01)
+#define GLPCI_SB_GLD_MSR_PM ( MSR_SB_GLPCI + 0x04)
+#define GLPCI_SB_CTRL ( MSR_SB_GLPCI + 0x10)
+#define GLPCI_CRTL_PPIDE_SET ( 1 << 17)
+/* */
+/* GLCP*/
+/* */
+#define GLCP_SB_GLD_MSR_CAP ( MSR_SB_GLCP + 0x00)
+#define GLCP_SB_GLD_MSR_CONF ( MSR_SB_GLCP + 0x01)
+#define GLCP_SB_GLD_MSR_PM ( MSR_SB_GLCP + 0x04)
+
+/* */
+/* MDD*/
+/* */
+
+#define MDD_SMBUS (0x6000)
+#define MDD_GPIO (0x6100)
+#define MDD_MFGPT (0x6200)
+#define MDD_FLASH_BAR_0 (0x6400)
+#define MDD_FLASH_BAR_1 (0x6500)
+#define MDD_FLASH_BAR_2 (0x6600)
+#define MDD_FLASH_BAR_3 (0x6700)
+
+#define MDD_ACPI_BASE (0x9C00)
+#define MDD_PM (0x9D00)
+
+
+// # FIXME
+#define GPIO_BASE MDD_GPIO
+#define ACPI_BASE MDD_ACPI_BASE
+#define PMLogic_BASE MDD_PM
+
+
+#define MDD_SB_GLD_MSR_CAP ( MSR_SB_MDD + 0x00)
+#define MDD_SB_GLD_MSR_CONF ( MSR_SB_MDD + 0x01)
+#define MDD_SB_GLD_MSR_PM ( MSR_SB_MDD + 0x04)
+#define LBAR_EN ( 0x01)
+#define IO_MASK ( 0x1f)
+#define MEM_MASK ( 0x0FFFFF)
+#define MDD_LBAR_IRQ ( MSR_SB_MDD + 0x08)
+#define MDD_LBAR_KEL1 ( MSR_SB_MDD + 0x09)
+#define MDD_LBAR_KEL2 ( MSR_SB_MDD + 0x0A)
+#define MDD_LBAR_SMB ( MSR_SB_MDD + 0x0B)
+#define MDD_LBAR_GPIO ( MSR_SB_MDD + 0x0C)
+#define MDD_LBAR_MFGPT ( MSR_SB_MDD + 0x0D)
+#define MDD_LBAR_ACPI ( MSR_SB_MDD + 0x0E)
+#define MDD_LBAR_PMS ( MSR_SB_MDD + 0x0F)
+
+#define MDD_LBAR_FLSH0 ( MSR_SB_MDD + 0x010)
+#define MDD_LBAR_FLSH1 ( MSR_SB_MDD + 0x011)
+#define MDD_LBAR_FLSH2 ( MSR_SB_MDD + 0x012)
+#define MDD_LBAR_FLSH3 ( MSR_SB_MDD + 0x013)
+#define MDD_LEG_IO ( MSR_SB_MDD + 0x014)
+#define MDD_PIN_OPT ( MSR_SB_MDD + 0x015)
+#define MDD_SOFT_IRQ ( MSR_SB_MDD + 0x016)
+#define MDD_SOFT_RESET ( MSR_SB_MDD + 0x017)
+#define MDD_NORF_CNTRL ( MSR_SB_MDD + 0x018)
+#define MDD_NORF_T01 ( MSR_SB_MDD + 0x019)
+#define MDD_NORF_T23 ( MSR_SB_MDD + 0x01A)
+#define MDD_NANDF_DATA ( MSR_SB_MDD + 0x01B)
+#define MDD_NADF_CNTL ( MSR_SB_MDD + 0x01C)
+#define MDD_AC_DMA ( MSR_SB_MDD + 0x01E)
+#define MDD_KEL_CNTRL ( MSR_SB_MDD + 0x01F)
+
+#define MDD_IRQM_YLOW ( MSR_SB_MDD + 0x020)
+#define MDD_IRQM_YHIGH ( MSR_SB_MDD + 0x021)
+#define MDD_IRQM_ZLOW ( MSR_SB_MDD + 0x022)
+#define MDD_IRQM_ZHIGH ( MSR_SB_MDD + 0x023)
+#define MDD_IRQM_PRIM ( MSR_SB_MDD + 0x024)
+#define MDD_IRQM_LPC ( MSR_SB_MDD + 0x025)
+#define MDD_IRQM_LXIRR ( MSR_SB_MDD + 0x026)
+#define MDD_IRQM_HXIRR ( MSR_SB_MDD + 0x027)
+
+#define MDD_MFGPT_IRQ ( MSR_SB_MDD + 0x028)
+#define MDD_MFGPT_NR ( MSR_SB_MDD + 0x029)
+#define MDD_MFGPT_RES0 ( MSR_SB_MDD + 0x02A)
+#define MDD_MFGPT_RES1 ( MSR_SB_MDD + 0x02B)
+
+#define MDD_FLOP_S3F2 ( MSR_SB_MDD + 0x030)
+#define MDD_FLOP_S3F7 ( MSR_SB_MDD + 0x031)
+#define MDD_FLOP_S372 ( MSR_SB_MDD + 0x032)
+#define MDD_FLOP_S377 ( MSR_SB_MDD + 0x033)
+
+#define MDD_PIC_S ( MSR_SB_MDD + 0x034)
+#define MDD_PIT_S ( MSR_SB_MDD + 0x036)
+#define MDD_PIT_CNTRL ( MSR_SB_MDD + 0x037)
+
+#define MDD_UART1_MOD ( MSR_SB_MDD + 0x038)
+#define MDD_UART1_DON ( MSR_SB_MDD + 0x039)
+#define MDD_UART1_CONF ( MSR_SB_MDD + 0x03A)
+#define MDD_UART2_MOD ( MSR_SB_MDD + 0x03C)
+#define MDD_UART2_DON ( MSR_SB_MDD + 0x03D)
+#define MDD_UART2_CONF ( MSR_SB_MDD + 0x03E)
+
+#define MDD_DMA_MAP ( MSR_SB_MDD + 0x040)
+#define MDD_DMA_SHAD1 ( MSR_SB_MDD + 0x041)
+#define MDD_DMA_SHAD2 ( MSR_SB_MDD + 0x042)
+#define MDD_DMA_SHAD3 ( MSR_SB_MDD + 0x043)
+#define MDD_DMA_SHAD4 ( MSR_SB_MDD + 0x044)
+#define MDD_DMA_SHAD5 ( MSR_SB_MDD + 0x045)
+#define MDD_DMA_SHAD6 ( MSR_SB_MDD + 0x046)
+#define MDD_DMA_SHAD7 ( MSR_SB_MDD + 0x047)
+#define MDD_DMA_SHAD8 ( MSR_SB_MDD + 0x048)
+#define MDD_DMA_SHAD9 ( MSR_SB_MDD + 0x049)
+
+#define MDD_LPC_EADDR ( MSR_SB_MDD + 0x04C)
+#define MDD_LPC_ESTAT ( MSR_SB_MDD + 0x04D)
+#define MDD_LPC_SIRQ ( MSR_SB_MDD + 0x04E)
+#define MDD_LPC_RES ( MSR_SB_MDD + 0x04F)
+
+#define MDD_PML_TMR ( MSR_SB_MDD + 0x050)
+#define MDD_RTC_RAM_LO_CK ( MSR_SB_MDD + 0x054)
+#define MDD_RTC_DOMA_IND ( MSR_SB_MDD + 0x055)
+#define MDD_RTC_MONA_IND ( MSR_SB_MDD + 0x056)
+#define MDD_RTC_CENTURY_OFFSET ( MSR_SB_MDD + 0x057)
+
+/* ***********************************************************/
+/* LBUS Device Equates - */
+/* ***********************************************************/
+
+/* */
+/* SMBus*/
+/* */
+
+#define SMBUS_SMBSDA ( SMBUS_BASE + 0x00)
+#define SMBUS_SMBST ( SMBUS_BASE + 0x01)
+#define SMBST_SLVSTP_SET ( 1 << 7)
+#define SMBST_SDAST_SET ( 1 << 6)
+#define SMBST_BER_SET ( 1 << 5)
+#define SMBST_NEGACK_SET ( 1 << 4)
+#define SMBST_STASTR_SET ( 1 << 3)
+#define SMBST_NMATCH_SET ( 1 << 2)
+#define SMBST_MASTER_SET ( 1 << 1)
+#define SMBST_XMIT_SET ( 1 << 0)
+#define SMBUS_SMBCST ( SMBUS_BASE + 0x02)
+#define SMBCST_TGSCL_SET ( 1 << 5)
+#define SMBCST_TSDA_SET ( 1 << 4)
+#define SMBCST_GCMTCH_SET ( 1 << 3)
+#define SMBCST_MATCH_SET ( 1 << 2)
+#define SMBCST_BB_SET ( 1 << 1)
+#define SMBCST_BUSY_SET ( 1 << 0)
+#define SMBUS_SMBCTL1 ( SMBUS_BASE + 0x03)
+#define SMBCTL1_STASTRE_SET ( 1 << 7)
+#define SMBCTL1_NMINTE_SET ( 1 << 6)
+#define SMBCTL1_GCMEN_SET ( 1 << 5)
+#define SMBCTL1_RECACK_SET ( 1 << 4)
+#define SMBCTL1_DMAEN_SET ( 1 << 3)
+#define SMBCTL1_INTEN_SET ( 1 << 2)
+#define SMBCTL1_STOP_SET ( 1 << 1)
+#define SMBCTL1_START_SET ( 1 << 0)
+#define SMBUS_SMBADDR ( SMBUS_BASE + 0x04)
+#define SMBADDR_SAEN_SET ( 1 << 7)
+#define SMBUS_SMBCTL2 ( SMBUS_BASE + 0x05)
+#define SMBCTL2_SCLFRQ_SHIFT ( 1 << 1)
+#define SMBCTL2_ENABLE_SET ( 1 << 0)
+
+/* */
+/* GPIO*/
+/* */
+
+#define GPIOL_0_SET ( 1 << 0)
+#define GPIOL_1_SET ( 1 << 1)
+#define GPIOL_2_SET ( 1 << 2)
+#define GPIOL_3_SET ( 1 << 3)
+#define GPIOL_4_SET ( 1 << 4)
+#define GPIOL_5_SET ( 1 << 5)
+#define GPIOL_6_SET ( 1 << 6)
+#define GPIOL_7_SET ( 1 << 7)
+#define GPIOL_8_SET ( 1 << 8)
+#define GPIOL_9_SET ( 1 << 9)
+#define GPIOL_10_SET ( 1 << 10)
+#define GPIOL_11_SET ( 1 << 11)
+#define GPIOL_12_SET ( 1 << 12)
+#define GPIOL_13_SET ( 1 << 13)
+#define GPIOL_14_SET ( 1 << 14)
+#define GPIOL_15_SET ( 1 << 15)
+
+#define GPIOL_0_CLEAR ( 1 << 16)
+#define GPIOL_1_CLEAR ( 1 << 17)
+#define GPIOL_2_CLEAR ( 1 << 18)
+#define GPIOL_3_CLEAR ( 1 << 19)
+#define GPIOL_4_CLEAR ( 1 << 20)
+#define GPIOL_5_CLEAR ( 1 << 21)
+#define GPIOL_6_CLEAR ( 1 << 22)
+#define GPIOL_7_CLEAR ( 1 << 23)
+#define GPIOL_8_CLEAR ( 1 << 24)
+#define GPIOL_9_CLEAR ( 1 << 25)
+#define GPIOL_10_CLEAR ( 1 << 26)
+#define GPIOL_11_CLEAR ( 1 << 27)
+#define GPIOL_12_CLEAR ( 1 << 28)
+#define GPIOL_13_CLEAR ( 1 << 29)
+#define GPIOL_14_CLEAR ( 1 << 30)
+#define GPIOL_15_CLEAR ( 1 << 31)
+
+#define GPIOH_16_SET ( 1 << 0)
+#define GPIOH_17_SET ( 1 << 1)
+#define GPIOH_18_SET ( 1 << 2)
+#define GPIOH_19_SET ( 1 << 3)
+#define GPIOH_20_SET ( 1 << 4)
+#define GPIOH_21_SET ( 1 << 5)
+#define GPIOH_22_SET ( 1 << 6)
+#define GPIOH_23_SET ( 1 << 7)
+#define GPIOH_24_SET ( 1 << 8)
+#define GPIOH_25_SET ( 1 << 9)
+#define GPIOH_26_SET ( 1 << 10)
+#define GPIOH_27_SET ( 1 << 11)
+#define GPIOH_28_SET ( 1 << 12)
+#define GPIOH_29_SET ( 1 << 13)
+#define GPIOH_30_SET ( 1 << 14)
+#define GPIOH_31_SET ( 1 << 15)
+
+#define GPIOH_16_CLEAR ( 1 << 16)
+#define GPIOH_17_CLEAR ( 1 << 17)
+#define GPIOH_18_CLEAR ( 1 << 18)
+#define GPIOH_19_CLEAR ( 1 << 19)
+#define GPIOH_20_CLEAR ( 1 << 20)
+#define GPIOH_21_CLEAR ( 1 << 21)
+#define GPIOH_22_CLEAR ( 1 << 22)
+#define GPIOH_23_CLEAR ( 1 << 23)
+#define GPIOH_24_CLEAR ( 1 << 24)
+#define GPIOH_25_CLEAR ( 1 << 25)
+#define GPIOH_26_CLEAR ( 1 << 26)
+#define GPIOH_27_CLEAR ( 1 << 27)
+#define GPIOH_28_CLEAR ( 1 << 28)
+#define GPIOH_29_CLEAR ( 1 << 29)
+#define GPIOH_30_CLEAR ( 1 << 30)
+#define GPIOH_31_CLEAR ( 1 << 31)
+
+
+/* GPIO LOW Bank Bit Registers*/
+#define GPIOL_OUTPUT_VALUE ( GPIO_BASE + 0x00)
+#define GPIOL_OUTPUT_ENABLE ( GPIO_BASE + 0x04)
+#define GPIOL_OUT_OPENDRAIN ( GPIO_BASE + 0x08)
+#define GPIOL_OUTPUT_INVERT_ENABLE ( GPIO_BASE + 0x0C)
+#define GPIOL_OUT_AUX1_SELECT ( GPIO_BASE + 0x10)
+#define GPIOL_OUT_AUX2_SELECT ( GPIO_BASE + 0x14)
+#define GPIOL_PULLUP_ENABLE ( GPIO_BASE + 0x18)
+#define GPIOL_PULLDOWN_ENABLE ( GPIO_BASE + 0x1C)
+#define GPIOL_INPUT_ENABLE ( GPIO_BASE + 0x20)
+#define GPIOL_INPUT_INVERT_ENABLE ( GPIO_BASE + 0x24)
+#define GPIOL_IN_FILTER_ENABLE ( GPIO_BASE + 0x28)
+#define GPIOL_IN_EVENTCOUNT_ENABLE ( GPIO_BASE + 0x2C)
+#define GPIOL_READ_BACK ( GPIO_BASE + 0x30)
+#define GPIOL_IN_AUX1_SELECT ( GPIO_BASE + 0x34)
+#define GPIOL_EVENTS_ENABLE ( GPIO_BASE + 0x38)
+#define GPIOL_LOCK_ENABLE ( GPIO_BASE + 0x3C)
+#define GPIOL_IN_POSEDGE_ENABLE ( GPIO_BASE + 0x40)
+#define GPIOL_IN_NEGEDGE_ENABLE ( GPIO_BASE + 0x44)
+#define GPIOL_IN_POSEDGE_STATUS ( GPIO_BASE + 0x48)
+#define GPIOL_IN_NEGEDGE_STATUS ( GPIO_BASE + 0x4C)
+
+/* GPIO High Bank Bit Registers*/
+#define GPIOH_OUTPUT_VALUE ( GPIO_BASE + 0x80)
+#define GPIOH_OUTPUT_ENABLE ( GPIO_BASE + 0x84)
+#define GPIOH_OUT_OPENDRAIN ( GPIO_BASE + 0x88)
+#define GPIOH_OUTPUT_INVERT_ENABLE ( GPIO_BASE + 0x8C)
+#define GPIOH_OUT_AUX1_SELECT ( GPIO_BASE + 0x90)
+#define GPIOH_OUT_AUX2_SELECT ( GPIO_BASE + 0x94)
+#define GPIOH_PULLUP_ENABLE ( GPIO_BASE + 0x98)
+#define GPIOH_PULLDOWN_ENABLE ( GPIO_BASE + 0x9C)
+#define GPIOH_INPUT_ENABLE ( GPIO_BASE + 0x0A0)
+#define GPIOH_INPUT_INVERT_ENABLE ( GPIO_BASE + 0x0A4)
+#define GPIOH_IN_FILTER_ENABLE ( GPIO_BASE + 0x0A8)
+#define GPIOH_IN_EVENTCOUNT_ENABLE ( GPIO_BASE + 0x0AC)
+#define GPIOH_READ_BACK ( GPIO_BASE + 0x0B0)
+#define GPIOH_IN_AUX1_SELECT ( GPIO_BASE + 0x0B4)
+#define GPIOH_EVENTS_ENABLE ( GPIO_BASE + 0x0B8)
+#define GPIOH_LOCK_ENABLE ( GPIO_BASE + 0x0BC)
+#define GPIOH_IN_POSEDGE_ENABLE ( GPIO_BASE + 0x0C0)
+#define GPIOH_IN_NEGEDGE_ENABLE ( GPIO_BASE + 0x0C4)
+#define GPIOH_IN_POSEDGE_STATUS ( GPIO_BASE + 0x0C8)
+#define GPIOH_IN_NEGEDGE_STATUS ( GPIO_BASE + 0x0CC)
+
+/* Input Conditioning Function Registers*/
+#define GPIO_00_FILTER_AMOUNT ( GPIO_BASE + 0x50)
+#define GPIO_00_FILTER_COUNT ( GPIO_BASE + 0x52)
+#define GPIO_00_EVENT_COUNT ( GPIO_BASE + 0x54)
+#define GPIO_00_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x56)
+#define GPIO_01_FILTER_AMOUNT ( GPIO_BASE + 0x58)
+#define GPIO_01_FILTER_COUNT ( GPIO_BASE + 0x5A)
+#define GPIO_01_EVENT_COUNT ( GPIO_BASE + 0x5C)
+#define GPIO_01_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x5E)
+#define GPIO_02_FILTER_AMOUNT ( GPIO_BASE + 0x60)
+#define GPIO_02_FILTER_COUNT ( GPIO_BASE + 0x62)
+#define GPIO_02_EVENT_COUNT ( GPIO_BASE + 0x64)
+#define GPIO_02_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x66)
+#define GPIO_03_FILTER_AMOUNT ( GPIO_BASE + 0x68)
+#define GPIO_03_FILTER_COUNT ( GPIO_BASE + 0x6A)
+#define GPIO_03_EVENT_COUNT ( GPIO_BASE + 0x6C)
+#define GPIO_03_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x6E)
+#define GPIO_04_FILTER_AMOUNT ( GPIO_BASE + 0x70)
+#define GPIO_04_FILTER_COUNT ( GPIO_BASE + 0x72)
+#define GPIO_04_EVENT_COUNT ( GPIO_BASE + 0x74)
+#define GPIO_04_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x76)
+#define GPIO_05_FILTER_AMOUNT ( GPIO_BASE + 0x78)
+#define GPIO_05_FILTER_COUNT ( GPIO_BASE + 0x7A)
+#define GPIO_05_EVENT_COUNT ( GPIO_BASE + 0x7C)
+#define GPIO_05_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x7E)
+#define GPIO_06_FILTER_AMOUNT ( GPIO_BASE + 0x0D0)
+#define GPIO_06_FILTER_COUNT ( GPIO_BASE + 0x0D2)
+#define GPIO_06_EVENT_COUNT ( GPIO_BASE + 0x0D4)
+#define GPIO_06_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x0D6)
+#define GPIO_07_FILTER_AMOUNT ( GPIO_BASE + 0x0D8)
+#define GPIO_07_FILTER_COUNT ( GPIO_BASE + 0x0DA)
+#define GPIO_07_EVENT_COUNT ( GPIO_BASE + 0x0DC)
+#define GPIO_07_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x0DE)
+
+/* R/W GPIO Interrupt &PME Mapper Registers*/
+#define GPIO_MAPPER_X ( GPIO_BASE + 0x0E0)
+#define GPIO_MAPPER_Y ( GPIO_BASE + 0x0E4)
+#define GPIO_MAPPER_Z ( GPIO_BASE + 0x0E8)
+#define GPIO_MAPPER_W ( GPIO_BASE + 0x0EC)
+#define GPIO_FE_SELECT_0 ( GPIO_BASE + 0x0F0)
+#define GPIO_FE_SELECT_1 ( GPIO_BASE + 0x0F1)
+#define GPIO_FE_SELECT_2 ( GPIO_BASE + 0x0F2)
+#define GPIO_FE_SELECT_3 ( GPIO_BASE + 0x0F3)
+#define GPIO_FE_SELECT_4 ( GPIO_BASE + 0x0F4)
+#define GPIO_FE_SELECT_5 ( GPIO_BASE + 0x0F5)
+#define GPIO_FE_SELECT_6 ( GPIO_BASE + 0x0F6)
+#define GPIO_FE_SELECT_7 ( GPIO_BASE + 0x0F7)
+
+/* Event Counter Decrement Registers*/
+#define GPIOL_IN_EVENT_DECREMENT ( GPIO_BASE + 0x0F8)
+#define GPIOH_IN_EVENT_DECREMENT ( GPIO_BASE + 0x0FC)
+
+/* This is for 286reset compatibility. 0xCange to mat0xc 5535 virtualized stuff.*/
+#define FUNC0 ( 0x90)
+
+
+/* sworley, PMC register*/
+#define PM_SSD ( PMLogic_BASE + 0x00)
+#define PM_SCXA ( PMLogic_BASE + 0x04)
+#define PM_SCYA ( PMLogic_BASE + 0x08)
+#define PM_SODA ( PMLogic_BASE + 0x0C)
+#define PM_SCLK ( PMLogic_BASE + 0x10)
+#define PM_SED ( PMLogic_BASE + 0x14)
+#define PM_SCXD ( PMLogic_BASE + 0x18)
+#define PM_SCYD ( PMLogic_BASE + 0x1C)
+#define PM_SIDD ( PMLogic_BASE + 0x20)
+#define PM_WKD ( PMLogic_BASE + 0x30)
+#define PM_WKXD ( PMLogic_BASE + 0x34)
+#define PM_RD ( PMLogic_BASE + 0x38)
+#define PM_WKXA ( PMLogic_BASE + 0x3C)
+#define PM_FSD ( PMLogic_BASE + 0x40)
+#define PM_TSD ( PMLogic_BASE + 0x44)
+#define PM_PSD ( PMLogic_BASE + 0x48)
+#define PM_NWKD ( PMLogic_BASE + 0x4C)
+#define PM_AWKD ( PMLogic_BASE + 0x50)
+#define PM_SSC ( PMLogic_BASE + 0x54)
+
+
+/* FLASH device macros */
+#define FLASH_TYPE_NONE 0 /* No flash device installed */
+#define FLASH_TYPE_NAND 1 /* NAND device */
+#define FLASH_TYPE_NOR 2 /* NOR device */
+
+#define FLASH_IF_MEM 1 /* Memory or memory-mapped I/O interface for Flash device */
+#define FLASH_IF_IO 2 /* I/O interface for Flash device */
+
+/* Flash Memory Mask values */
+#define FLASH_MEM_DEFAULT 0x00000000
+#define FLASH_MEM_4K 0xFFFFF000
+#define FLASH_MEM_8K 0xFFFFE000
+#define FLASH_MEM_16K 0xFFFFC000
+#define FLASH_MEM_128K 0xFFFE0000
+#define FLASH_MEM_512K 0xFFFC0000
+#define FLASH_MEM_4M 0xFFC00000
+#define FLASH_MEM_8M 0xFF800000
+#define FLASH_MEM_16M 0xFF000000
+
+/* Flash IO Mask values */
+#define FLASH_IO_DEFAULT 0x00000000
+#define FLASH_IO_16B 0x0000FFF0
+#define FLASH_IO_32B 0x0000FFE0
+#define FLASH_IO_64B 0x0000FFC0
+#define FLASH_IO_128B 0x0000FF80
+#define FLASH_IO_256B 0x0000FF00
+
+
+
+#endif /* CPU_AMD_LXDEF_H */
diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h
index 481d5ef..f396184 100644
--- a/src/include/device/pci_ids.h
+++ b/src/include/device/pci_ids.h
@@ -399,6 +399,7 @@
#define PCI_VENDOR_ID_AMD 0x1022
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
+#define PCI_DEVICE_ID_AMD_LX 0x1054
#define PCI_DEVICE_ID_AMD_SCSI 0x2020
#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006
#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007