| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * Fch SATA controller Library |
| * |
| * SATA Library |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: FCH |
| * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ |
| * |
| */ |
| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| **************************************************************************** |
| */ |
| #include "FchPlatform.h" |
| #include "Filecode.h" |
| #define FILECODE PROC_FCH_SATA_SATALIB_FILECODE |
| |
| |
| |
| /** |
| * sataBar5setting - Config SATA BAR5 |
| * |
| * |
| * @param[in] FchDataPtr - Fch configuration structure pointer. |
| * @param[in] *Bar5Ptr - SATA BAR5 buffer. |
| * |
| */ |
| VOID |
| SataBar5setting ( |
| IN VOID *FchDataPtr, |
| IN UINT32 *Bar5Ptr |
| ) |
| { |
| FCH_DATA_BLOCK *LocalCfgPtr; |
| AMD_CONFIG_PARAMS *StdHeader; |
| |
| LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; |
| StdHeader = LocalCfgPtr->StdHeader; |
| |
| // |
| //Get BAR5 value |
| // |
| ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x24), AccessWidth32, Bar5Ptr, StdHeader); |
| |
| // |
| //Assign temporary BAR if is not already assigned |
| // |
| if ( (*Bar5Ptr == 0) || (*Bar5Ptr == - 1) ) { |
| // |
| //assign temporary BAR5 |
| // |
| if ( (LocalCfgPtr->Sata.TempMmio == 0) || (LocalCfgPtr->Sata.TempMmio == - 1) ) { |
| *Bar5Ptr = 0xFEC01000; |
| } else { |
| *Bar5Ptr = LocalCfgPtr->Sata.TempMmio; |
| } |
| WritePci (((SATA_BUS_DEV_FUN << 16) + 0x24), AccessWidth32, Bar5Ptr, StdHeader); |
| } |
| |
| // |
| //Clear Bits 9:0 |
| // |
| *Bar5Ptr = *Bar5Ptr & 0xFFFFFC00; |
| } |
| |
| /** |
| * sataEnableWriteAccess - Enable Sata PCI configuration space |
| * |
| * @param[in] StdHeader |
| * |
| */ |
| VOID |
| SataEnableWriteAccess ( |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ) |
| { |
| // |
| // BIT0 Enable write access to PCI header |
| // |
| RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040 ), AccessWidth8, 0xff, BIT0, StdHeader); |
| } |
| |
| /** |
| * sataDisableWriteAccess - Disable Sata PCI configuration space |
| * |
| * @param[in] StdHeader |
| * |
| */ |
| VOID |
| SataDisableWriteAccess ( |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ) |
| { |
| // |
| // Disable write access to PCI header |
| // |
| RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040 ), AccessWidth8, (UINT32)~BIT0, 0, StdHeader); |
| } |
| |
| |
| |
| #ifdef SATA_BUS_DEV_FUN_FPGA |
| |
| /** |
| * FchSataBar5settingFpga |
| * |
| * @param[in] LocalCfgPtr |
| * @param[in] Bar5 |
| * |
| */ |
| VOID |
| FchSataBar5settingFpga ( |
| IN FCH_DATA_BLOCK *LocalCfgPtr, |
| IN UINT32 *Bar5 |
| ) |
| { |
| UINT8 Value; |
| |
| //Get BAR5 value |
| ReadPci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x24), AccWidthUint32, Bar5); |
| |
| //Assign temporary BAR if is not already assigned |
| if ( (*Bar5 == 0) || (*Bar5 == - 1) ) { |
| //assign temporary BAR5 |
| if ( (LocalCfgPtr->Sata.TempMMIO == 0) || (LocalCfgPtr->Sata.TempMMIO == - 1) ) { |
| *Bar5 = 0xFEC01000; |
| } else { |
| *Bar5 = LocalCfgPtr->Sata.TempMMIO; |
| } |
| WritePci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x24), AccWidthUint32, Bar5); |
| } |
| |
| //Clear Bits 9:0 |
| *Bar5 = *Bar5 & 0xFFFFFC00; |
| Value = 0x07; |
| WritePci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x04), AccWidthUint8, &Value); |
| WritePci (((PCIB_BUS_DEV_FUN << 16) + 0x04), AccWidthUint8, &Value); |
| } |
| |
| /** |
| * FchSataDriveDetectionFpga |
| * |
| * @param[in] LocalCfgPtr |
| * @param[in] Bar5 |
| * |
| */ |
| VOID |
| FchSataDriveDetectionFpga ( |
| IN FCH_DATA_BLOCK *LocalCfgPtr, |
| IN UINT32 *Bar5 |
| ) |
| { |
| UINT32 SataBarFpgaInfo; |
| UINT8 PortNum; |
| UINT8 SataFpaPortType; |
| UINT16 IoBase; |
| UINT16 SataFpgaLoopVarWord; |
| AMD_CONFIG_PARAMS *StdHeader; |
| |
| StdHeader = LocalCfgPtr->StdHeader; |
| |
| TRACE ((DMSG_FCH_TRACE, "FCH - Entering sata drive detection procedure\n\n")); |
| TRACE ((DMSG_FCH_TRACE, "SATA BAR5 is %X \n", *pBar5)); |
| |
| for ( PortNum = 0; PortNum < 4; PortNum++ ) { |
| ReadMem (*Bar5 + FCH_SATA_BAR5_REG128 + PortNum * 0x80, AccWidthUint32, &SataBarFpgaInfo); |
| if ( ( SataBarFpgaInfo & 0x0F ) == 0x03 ) { |
| if ( PortNum & BIT0 ) { |
| //this port belongs to secondary channel |
| ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + 0x18), AccWidthUint16, &IoBase); |
| } else { |
| //this port belongs to primary channel |
| ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + 0x10), AccWidthUint16, &IoBase); |
| } |
| |
| //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them |
| if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) { |
| IoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (PortNum & BIT0) << 7)) & 0x80 )) ); |
| } |
| |
| if ( PortNum & BIT1 ) { |
| //this port is slave |
| SataFpaPortType = 0xB0; |
| } else { |
| //this port is master |
| SataFpaPortType = 0xA0; |
| } |
| |
| IoBase &= 0xFFF8; |
| LibAmdIoWrite (AccessWidth8, IoBase + 6, &SataFpaPortType, StdHeader); |
| |
| //Wait in loop for 30s for the drive to become ready |
| for ( SataFpgaLoopVarWord = 0; SataFpgaLoopVarWord < 300000; SataFpgaLoopVarWord++ ) { |
| LibAmdIoRead (AccessWidth8, IoBase + 7, &SataFpaPortType, StdHeader); |
| if ( (SataFpaPortType & 0x88) == 0 ) { |
| break; |
| } |
| FchStall (100, StdHeader); |
| } |
| } |
| } |
| } |
| |
| /** |
| * FchSataDriveFpga - |
| * |
| * |
| * |
| * @param[in] FchDataPtr Fch configuration structure pointer. |
| * |
| */ |
| VOID |
| FchSataDriveFpga ( |
| IN VOID *FchDataPtr |
| ) |
| { |
| UINT32 Bar5; |
| FCH_DATA_BLOCK *LocalCfgPtr; |
| |
| LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; |
| |
| Bar5 = 0; |
| SataBar5setting (LocalCfgPtr, &Bar5); |
| |
| FchSataBar5settingFpga (LocalCfgPtr, &Bar5); |
| FchSataDriveDetectionFpga (LocalCfgPtr, &Bar5); |
| } |
| |
| #endif |
| |