blob: 4cb44eae54ca811b31607af96473383e79d9dac0 [file] [log] [blame]
/* $NoKeywords:$ */
/**
* @file
*
* Config Fch SATA controller (Ide2Ahci mode)
*
* Init SATA Ide2Ahci features.
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: FCH
* @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $
*
*/
/*
*****************************************************************************
*
* Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#include "Filecode.h"
#define FILECODE PROC_FCH_SATA_IDE2AHCIMID_FILECODE
/**
* FchInitMidSataIde2Ahci - Config SATA Ide2Ahci controller
* after PCI emulation
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitMidSataIde2Ahci (
IN VOID *FchDataPtr
)
{
UINT32 Bar5;
FCH_DATA_BLOCK *LocalCfgPtr;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
SataIde2AhciSetDeviceNumMsi (LocalCfgPtr);
SataBar5setting (LocalCfgPtr, &Bar5);
//
//If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround.
//
if ( ! (LocalCfgPtr->Misc.S3Resume) ) {
SataDriveDetection (LocalCfgPtr, &Bar5);
}
}