southbridge/amd/agesa/hudson/Kconfig: Fix space/tab usage
Change-Id: I390c14b3e145dab45b96e25833fe5fed2e5a0adc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7637
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig
index 72370ea..0779000 100644
--- a/src/southbridge/amd/agesa/hudson/Kconfig
+++ b/src/southbridge/amd/agesa/hudson/Kconfig
@@ -62,32 +62,32 @@
config HUDSON_IMC_FWM
bool "Add imc firmware"
default y
- help
+ help
Add Hudson 2/3/4 IMC Firmware to support the onboard fan control
config HUDSON_GEC_FWM
bool
default n
- help
+ help
Add Hudson 2/3/4 GEC Firmware to support the onboard gigabit Ethernet MAC.
Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard.
config HUDSON_XHCI_FWM_FILE
- string "XHCI firmware path and filename"
- default "3rdparty/southbridge/amd/hudson/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
- default "3rdparty/southbridge/amd/yangtze/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
+ string "XHCI firmware path and filename"
+ default "3rdparty/southbridge/amd/hudson/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
+ default "3rdparty/southbridge/amd/yangtze/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
depends on HUDSON_XHCI_FWM
config HUDSON_IMC_FWM_FILE
- string "IMC firmware path and filename"
- default "3rdparty/southbridge/amd/hudson/imc.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
- default "3rdparty/southbridge/amd/yangtze/imc.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
+ string "IMC firmware path and filename"
+ default "3rdparty/southbridge/amd/hudson/imc.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
+ default "3rdparty/southbridge/amd/yangtze/imc.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
depends on HUDSON_IMC_FWM
config HUDSON_GEC_FWM_FILE
- string "GEC firmware path and filename"
- default "3rdparty/southbridge/amd/hudson/gec.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
- default "3rdparty/southbridge/amd/yangtze/gec.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
+ string "GEC firmware path and filename"
+ default "3rdparty/southbridge/amd/hudson/gec.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
+ default "3rdparty/southbridge/amd/yangtze/gec.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
depends on HUDSON_GEC_FWM
config HUDSON_FWM
@@ -98,12 +98,12 @@
if HUDSON_FWM
config HUDSON_FWM_POSITION
- hex "Hudson Firmware ROM Position"
- default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
- default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
- default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
- default 0xFF820000 if BOARD_ROMSIZE_KB_8192
- default 0xFF020000 if BOARD_ROMSIZE_KB_16384
+ hex "Hudson Firmware ROM Position"
+ default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
+ default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
+ default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
+ default 0xFF820000 if BOARD_ROMSIZE_KB_8192
+ default 0xFF020000 if BOARD_ROMSIZE_KB_16384
help
Hudson requires the firmware MUST be located at
a specific address (ROM start address + 0x20000), otherwise
@@ -119,9 +119,9 @@
endif # HUDSON_FWM
config HUDSON_SATA_MODE
- int "SATA Mode"
- default 0
- range 0 6
+ int "SATA Mode"
+ default 0
+ range 0 6
help
Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
The default is NATIVE.
@@ -177,8 +177,8 @@
config RAID_ROM_ID
string "RAID device PCI IDs"
default "1022,7802"
- help
- 1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode
+ help
+ 1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode
config RAID_ROM_FILE
string "RAID ROM path and filename"