superio/ite/it8716f: Rewrite from hardcoded base addr
Following the same reasoning as:
HASHHERE superio/ite/it8721f: Rewrite from hardcoded base addr
Removing hard coded magics and expose sio pnp api in romstage.
Change-Id: I27433cb1a84b3641a6110ecf6bd5021e00769aba
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5565
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c
index 77eae09..44dda27 100644
--- a/src/mainboard/gigabyte/m57sli/romstage.c
+++ b/src/mainboard/gigabyte/m57sli/romstage.c
@@ -35,15 +35,14 @@
#include "lib/delay.c"
#include "cpu/x86/lapic.h"
#include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/ite/it8716f/early_serial.c"
-#include "superio/ite/it8716f/early_init.c"
+#include <superio/ite/it8716f/it8716f.h>
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#include "southbridge/nvidia/mcp55/early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
-#define GPIO_DEV PNP_DEV(0x2e, IT8716F_GPIO)
+#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO)
static void memreset(int controllers, const struct mem_controller *ctrl) { }
static void activate_spd_rom(const struct mem_controller *ctrl) { }
@@ -106,7 +105,6 @@
struct sys_info *sysinfo = &sysinfo_car;
int needs_reset = 0;
unsigned bsp_apicid = 0;
- uint8_t tmp = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
@@ -118,6 +116,8 @@
if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+#if 0
+ uint8_t tmp = 0;
pnp_enter_ext_func_mode(SERIAL_DEV);
/* The following line will set CLKIN to 24 MHz, external */
pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11);
@@ -132,6 +132,9 @@
}
it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
+#endif
+ it8716f_conf_clkin(CLKIN_DEV, IT8716F_UART_CLK_PREDIVIDE_48);
+ it8716f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
setup_mb_resource_map();