LUMPY: Add information to generate MPTABLE from devicetree.cb
Change-Id: If68888e87c5197328c59dafce1301eefe000e28e
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1462
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb
index 3e93df4..7a2ee6c 100644
--- a/src/mainboard/samsung/lumpy/devicetree.cb
+++ b/src/mainboard/samsung/lumpy/devicetree.cb
@@ -33,6 +33,10 @@
end
device pci_domain 0 on
+ ioapic_irq 4 INTA 0x10
+ ioapic_irq 4 INTB 0x11
+ ioapic_irq 4 INTC 0x12
+ ioapic_irq 4 INTD 0x13
subsystemid 0x1ae0 0xc000 inherit
device pci 00.0 on end # host bridge
device pci 02.0 on end # vga controller
@@ -68,19 +72,28 @@
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT
device pci 19.0 off end # Intel Gigabit Ethernet
- device pci 1a.0 on end # USB2 EHCI #2
- device pci 1b.0 on end # High Definition Audio
+ device pci 1a.0 on # USB2 EHCI #2
+ ioapic_irq 4 INTA 0x11
+ end
+ device pci 1b.0 on # High Definition Audio
+ ioapic_irq 4 INTA 0x16
+ end
device pci 1c.0 on end # PCIe Port #1 (WLAN)
device pci 1c.1 off end # PCIe Port #2
device pci 1c.2 off end # PCIe Port #3
- device pci 1c.3 on end # PCIe Port #4 (LAN)
+ device pci 1c.3 on # PCIe Port #4 (LAN)
+ # ioapic_irq 4 INTA 0x13
+ end
device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6
device pci 1c.6 off end # PCIe Port #7
device pci 1c.7 off end # PCIe Port #8
- device pci 1d.0 on end # USB2 EHCI #1
+ device pci 1d.0 on # USB2 EHCI #1
+ ioapic_irq 4 INTA 0x13
+ end
device pci 1e.0 off end # PCI bridge
device pci 1f.0 on # LPC bridge
+ ioapic_irq 4 INTA 0x10
chip superio/smsc/mec1308
device pnp 2e.1 on # PM1
io 0x60 = 0xb00
@@ -102,9 +115,21 @@
register "mailbox_port" = "0xa00"
device pnp ff.1 off end
end
+
+ chip drivers/generic/ioapic
+ register "have_isa_interrupts" = "1"
+ register "irq_on_fsb" = "1"
+ register "enable_virtual_wire" = "1"
+ register "base" = "0xfec00000"
+ device ioapic 4 on end
+ end
end
- device pci 1f.2 on end # SATA Controller 1
- device pci 1f.3 on end # SMBus
+ device pci 1f.2 on # SATA Controller 1
+ ioapic_irq 4 INTA 0x10
+ end
+ device pci 1f.3 on # SMBus
+ ioapic_irq 4 INTC 0x17
+ end
device pci 1f.5 off end # SATA Controller 2
device pci 1f.6 on end # Thermal
end