Add WinBond Super IO helpers.
* These helpers severely clear up winbond superio usage.
* Removed board_iwill_dk8_htx as it can be replaced by
board_agami_aruma (Mondrian Nuessle).
* Renamed board_agami_aruma to w83627hf_gpio24_raise.
* Clarified comments in w83627hf_gpio24_raise, and added
some things from the old iwill code.
* Moved all board functions name argument to const.
(warning breaks build)
* Moved iwill entry in board_pciid_enables.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2627 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/util/flashrom/board_enable.c b/util/flashrom/board_enable.c
index d5622c4..89d66ad 100644
--- a/util/flashrom/board_enable.c
+++ b/util/flashrom/board_enable.c
@@ -23,108 +23,87 @@
#include "flash.h"
#include "debug.h"
-static int board_iwill_dk8_htx(const char *name)
+/*
+ * Helper functions for many Winbond superIOs of the w836xx range.
+ */
+#define W836_INDEX 0x2E
+#define W836_DATA 0x2F
+
+/* Enter extended functions */
+static void
+w836xx_ext_enter(void)
{
- /* Extended function index register, either 0x2e or 0x4e. */
-#define EFIR 0x2e
- /* Extended function data register, one plus the index reg. */
-#define EFDR EFIR + 1
- char b;
+ outb(0x87, W836_INDEX);
+ outb(0x87, W836_INDEX);
+}
- /* Disable the flash write protect (which is connected to the
- * Winbond W83627HF GPIOs).
- */
- outb(0x87, EFIR); /* Sequence to unlock extended functions */
- outb(0x87, EFIR);
+/* Leave extended functions */
+static void
+w836xx_ext_leave(void)
+{
+ outb(0xAA, W836_INDEX);
+}
- /* Activate logical device. */
- outb(0x7, EFIR);
- outb(8, EFDR);
+/* General functions for read/writing WB SuperIOs */
+static unsigned char
+wbsio_read(unsigned char index)
+{
+ outb(index, W836_INDEX);
+ return inb(W836_DATA);
+}
- /* Set GPIO regs. */
- outb(0x2b, EFIR); /* GPIO multiplexed pin reg. */
- b = inb(EFDR) | 0xd0;
- outb(0x2b, EFIR);
- outb(b, EFDR);
+static void
+wbsio_write(unsigned char index, unsigned char data)
+{
+ outb(index, W836_INDEX);
+ outb(data, W836_DATA);
+}
- outb(0x30, EFIR); /* GPIO2 */
- b = inb(EFDR) | 0x01;
- outb(0x30, EFIR);
- outb(b, EFDR);
+static void
+wbsio_mask(unsigned char index, unsigned char data,
+ unsigned char mask)
+{
+ unsigned char tmp;
- outb(0xf0, EFIR); /* IO sel */
- b = inb(EFDR) | 0xef;
- outb(0xf0, EFIR);
- outb(b, EFDR);
-
- outb(0xf1, EFIR); /* GPIO data reg */
- b = inb(EFDR) | 0x16;
- outb(0xf1, EFIR);
- outb(b, EFDR);
-
- outb(0xf2, EFIR); /* GPIO inversion reg */
- b = inb(EFDR) | 0x00;
- outb(0xf2, EFIR);
- outb(b, EFDR);
-
- /* Lock extended functions again. */
- outb(0xaa, EFIR); /* Command to exit extended functions */
-
- return 0;
+ outb(index, W836_INDEX);
+ tmp = inb(W836_DATA) & ~mask;
+ outb(tmp | (data & mask), W836_DATA);
}
/*
- * Match on pci-ids, no report received, just data from the mainboard
- * specific code:
- * main: 0x1022:0x746B, which is the SMBUS controller.
- * card: 0x1022:0x36C0...
+ * WinBond w83627hf: raise GPIO24.
+ *
+ * Suited for:
+ * * Agami Aruma
+ * * IWILL DK8-HTX
*/
-static int board_agami_aruma(char *name)
+static int w83627hf_gpio24_raise(const char *name)
{
- /* Extended function index register, either 0x2e or 0x4e */
-#define EFIR 0x2e
- /* Extended function data register, one plus the index reg. */
-#define EFDR EFIR + 1
- char b;
+ w836xx_ext_enter();
- /* Disable the flash write protect. The flash write protect is
- * connected to the WinBond w83627hf GPIO 24.
- */
- outb(0x87, EFIR); /* sequence to unlock extended functions */
- outb(0x87, EFIR);
-
- outb(0x20, EFIR); /* SIO device ID register */
- b = inb(EFDR);
- printf_debug("\nW83627HF device ID = 0x%x\n",b);
-
- if (b != 0x52) {
- fprintf(stderr, "\nIncorrect device ID, aborting write protect disable\n");
+ /* Is this the w83627hf? */
+ if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */
+ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
+ name, wbsio_read(0x20));
+ w836xx_ext_leave();
return -1;
}
- outb(0x2b, EFIR); /* GPIO multiplexed pin reg. */
- b = inb(EFDR) | 0x10;
- outb(0x2b, EFIR);
- outb(b, EFDR); /* select GPIO 24 instead of WDTO */
+ /* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
+ wbsio_mask(0x2B, 0x10, 0x10);
- outb(0x7, EFIR); /* logical device select */
- outb(0x8, EFDR); /* point to device 8, GPIO port 2 */
+ wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */
- outb(0x30, EFIR); /* logic device activation control */
- outb(0x1, EFDR); /* activate */
+ wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */
- outb(0xf0, EFIR); /* GPIO 20-27 I/O selection register */
- b = inb(EFDR) & ~0x10;
- outb(0xf0, EFIR);
- outb(b, EFDR); /* set GPIO 24 as an output */
+ wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */
- outb(0xf1, EFIR); /* GPIO 20-27 data register */
- b = inb(EFDR) | 0x10;
- outb(0xf1, EFIR);
- outb(b, EFDR); /* set GPIO 24 */
+ wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
- outb(0xaa, EFIR); /* command to exit extended functions */
+ wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */
+
+ w836xx_ext_leave();
return 0;
}
@@ -135,7 +114,7 @@
* We don't need to do this when using linuxbios, GPIO15 is never lowered there.
*/
-static int board_via_epia_m(char *name)
+static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
unsigned int base;
@@ -164,33 +143,11 @@
}
/*
- * Winbond LPC super IO.
- *
- * Raises the ROM MEMW# line.
- */
-
-static void w83697_rom_memw_enable(void)
-{
- uint8_t val;
-
- outb(0x87, 0x2E); /* enable extended functions */
- outb(0x87, 0x2E);
-
- outb(0x24, 0x2E); /* rom bits live here */
-
- val = inb(0x2F);
- if (!(val & 0x02)) /* flash rom enabled? */
- outb(val | 0x08, 0x2F); /* enable MEMW# */
-
- outb(0xAA, 0x2E); /* disable extended functions */
-}
-
-/*
* Suited for Asus A7V8X-MX SE and A7V400-MX.
*
*/
-static int board_asus_a7v8x_mx(char *name)
+static int board_asus_a7v8x_mx(const char *name)
{
struct pci_dev *dev;
uint8_t val;
@@ -206,7 +163,13 @@
val &= 0x7F;
pci_write_byte(dev, 0x59, val);
- w83697_rom_memw_enable();
+ /* Raise ROM MEMW# line on Winbond w83697 SuperIO */
+ w836xx_ext_enter();
+
+ if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */
+ wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */
+
+ w836xx_ext_leave();
return 0;
}
@@ -241,18 +204,18 @@
char *lb_part;
char *name;
- int (*enable)(char *name);
+ int (*enable)(const char *name);
};
struct board_pciid_enable board_pciid_enables[] = {
+ { 0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise },
{ 0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
- "AGAMI", "ARUMA", "agami Aruma", board_agami_aruma },
+ "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise },
{ 0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01,
NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m },
{ 0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118,
NULL, NULL, "ASUS A7V8-MX SE", board_asus_a7v8x_mx },
- { 0x1022, 0x7468, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
- "iwill", "dk8_htx", "IWILL DK8-HTX", board_iwill_dk8_htx },
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL } /* Keep this */
};