rx6110sa: Add possibility to use both I2C and SMBus for the RTC
The driver for the RTC RX6110SA is designed to be used with I2C bus.
This patch adds the possibility to use SMBus operations to access the
RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It
is not enabled per default so that I2C will be used. One can set this
switch on board level to use SMBus instead.
Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/19978
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/drivers/i2c/rx6110sa/rx6110sa.c b/src/drivers/i2c/rx6110sa/rx6110sa.c
index 743b708..9d60bdb 100644
--- a/src/drivers/i2c/rx6110sa/rx6110sa.c
+++ b/src/drivers/i2c/rx6110sa/rx6110sa.c
@@ -14,6 +14,7 @@
*/
#include <device/i2c.h>
+#include <device/smbus.h>
#include <device/device.h>
#include <version.h>
#include <console/console.h>
@@ -24,17 +25,34 @@
#define I2C_BUS_NUM (dev->bus->secondary - 1)
#define I2C_DEV_NUM (dev->path.i2c.device)
+/* Function to write a register in the RTC with the given value. */
+static void rx6110sa_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+ if (IS_ENABLED(CONFIG_RX6110SA_USE_SMBUS))
+ smbus_write_byte(dev, reg, val);
+ else
+ i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, reg, val);
+}
+
+/* Function to read a register in the RTC. */
+static uint8_t rx6110sa_read(struct device *dev, uint8_t reg)
+{
+ uint8_t val = 0;
+
+ if (IS_ENABLED(CONFIG_RX6110SA_USE_SMBUS))
+ val = smbus_read_byte(dev, reg);
+ else
+ i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, reg, &val);
+ return val;
+}
+
/* Set RTC date from coreboot build date. */
static void rx6110sa_set_build_date(struct device *dev)
{
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, YEAR_REG,
- coreboot_build_date.year);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, MONTH_REG,
- coreboot_build_date.month);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, DAY_REG,
- coreboot_build_date.day);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, WEEK_REG,
- (1 << coreboot_build_date.weekday));
+ rx6110sa_write(dev, YEAR_REG, coreboot_build_date.year);
+ rx6110sa_write(dev, MONTH_REG, coreboot_build_date.month);
+ rx6110sa_write(dev, DAY_REG, coreboot_build_date.day);
+ rx6110sa_write(dev, WEEK_REG, (1 << coreboot_build_date.weekday));
}
/* Set RTC date from user defined date (available in e.g. device tree). */
@@ -42,14 +60,10 @@
{
struct drivers_i2c_rx6110sa_config *config = dev->chip_info;
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, YEAR_REG,
- bin2bcd(config->user_year));
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, MONTH_REG,
- bin2bcd(config->user_month));
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, DAY_REG,
- bin2bcd(config->user_day));
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, WEEK_REG,
- (1 << config->user_weekday));
+ rx6110sa_write(dev, YEAR_REG, bin2bcd(config->user_year));
+ rx6110sa_write(dev, MONTH_REG, bin2bcd(config->user_month));
+ rx6110sa_write(dev, DAY_REG, bin2bcd(config->user_day));
+ rx6110sa_write(dev, WEEK_REG, (1 << config->user_weekday));
}
static void rx6110sa_final(struct device *dev)
@@ -57,12 +71,12 @@
uint8_t hour, minute, second, year, month, day;
/* Read back current RTC date and time and print it to the console. */
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, HOUR_REG, &hour);
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, MINUTE_REG, &minute);
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, SECOND_REG, &second);
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, YEAR_REG, &year);
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, MONTH_REG, &month);
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, DAY_REG, &day);
+ hour = rx6110sa_read(dev, HOUR_REG);
+ minute = rx6110sa_read(dev, MINUTE_REG);
+ second = rx6110sa_read(dev, SECOND_REG);
+ year = rx6110sa_read(dev, YEAR_REG);
+ month = rx6110sa_read(dev, MONTH_REG);
+ day = rx6110sa_read(dev, DAY_REG);
printk(BIOS_INFO, "%s: Current date %02d.%02d.%02d %02d:%02d:%02d\n",
dev->chip_ops->name, bcd2bin(month), bcd2bin(day),
@@ -75,13 +89,13 @@
uint8_t reg;
/* Do a dummy read first. */
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, SECOND_REG, ®);
+ reg = rx6110sa_read(dev, SECOND_REG);
/*
* Check VLF-bit which indicates the RTC data loss, such as due to a
* supply voltage drop.
*/
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, FLAG_REGISTER, ®);
+ reg = rx6110sa_read(dev, FLAG_REGISTER);
if (!(reg & VLF_BIT))
/* No voltage low detected, everything is well. */
@@ -91,24 +105,26 @@
* Voltage low detected, initialize RX6110 SA again.
* Set first some registers to known state.
*/
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, BATTERY_BACKUP_REG, 0x00);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, RESERVED_BIT_REG, RTC_INIT_VALUE);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, DIGITAL_REG, 0x00);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, IRQ_CONTROL_REG, 0x00);
+ rx6110sa_write(dev, BATTERY_BACKUP_REG, 0x00);
+ rx6110sa_write(dev, RESERVED_BIT_REG, RTC_INIT_VALUE);
+ rx6110sa_write(dev, DIGITAL_REG, 0x00);
+ rx6110sa_write(dev, IRQ_CONTROL_REG, 0x00);
/* Clear timer enable bit and set frequency of clock output. */
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, EXTENSION_REG, ®);
+
+ reg = rx6110sa_read(dev, EXTENSION_REG);
reg &= ~(FSEL_MASK | TE_BIT);
reg |= (config->cof_selection << 6);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, EXTENSION_REG, reg);
+ rx6110sa_write(dev, EXTENSION_REG, reg);
/* Clear voltage low detect bit. */
- i2c_readb(I2C_BUS_NUM, I2C_DEV_NUM, FLAG_REGISTER, ®);
+ reg = rx6110sa_read(dev, FLAG_REGISTER);
reg &= ~VLF_BIT;
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, FLAG_REGISTER, reg);
+ rx6110sa_write(dev, FLAG_REGISTER, reg);
/* Before setting the clock stop oscillator. */
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, CTRL_REG, STOP_BIT);
+ rx6110sa_write(dev, CTRL_REG, STOP_BIT);
+
if (config->set_user_date) {
/* Set user date defined in device tree. */
printk(BIOS_DEBUG, "%s: Set to user date\n",
@@ -120,11 +136,11 @@
dev->chip_ops->name);
rx6110sa_set_build_date(dev);
}
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, HOUR_REG, 1);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, MINUTE_REG, 0);
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, SECOND_REG, 0);
+ rx6110sa_write(dev, HOUR_REG, 1);
+ rx6110sa_write(dev, MINUTE_REG, 0);
+ rx6110sa_write(dev, SECOND_REG, 0);
/* Start oscillator again as the RTC is set up now. */
- i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, CTRL_REG, 0x00);
+ rx6110sa_write(dev, CTRL_REG, 0x00);
}
static struct device_operations rx6110sa_ops = {