soc/intel/skylake: Assign device ops in chipset devicetree
Some PCI IDs were missing, and at least one (SPT's fast SPI
device in a generic SPI driver) was wrong. Hence, this patch
actually changes behavior depending on the devices actually
present in a machine.
In this patch the Skylake devicetree is written in a single-line
style. Alternative, the device operations could be put on a separate
line, e.g.
device pci 00.0 alias system_agent on
ops systemagent_ops
end
Tested on Kontron/bSL6. Notable in the log diff is that the
CSE and SATA drivers are hooked up now.
Change-Id: I8635fc53ca617b029d6fe1845eaef6c5c749db82
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/src/soc/intel/common/block/spi/spi.c b/src/soc/intel/common/block/spi/spi.c
index 3460718..dbafcf1 100644
--- a/src/soc/intel/common/block/spi/spi.c
+++ b/src/soc/intel/common/block/spi/spi.c
@@ -110,7 +110,7 @@
.dev_to_bus = &spi_dev_to_bus,
};
-static struct device_operations spi_dev_ops = {
+struct device_operations spi_dev_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
@@ -124,9 +124,6 @@
PCI_DID_INTEL_MTL_GSPI0,
PCI_DID_INTEL_MTL_GSPI1,
PCI_DID_INTEL_MTL_GSPI2,
- PCI_DID_INTEL_SPT_SPI1,
- PCI_DID_INTEL_SPT_SPI2,
- PCI_DID_INTEL_SPT_SPI3,
PCI_DID_INTEL_APL_SPI0,
PCI_DID_INTEL_APL_SPI1,
PCI_DID_INTEL_APL_SPI2,