mb/google/nissa/var/uldren: Remove fw_config probe for TS and TP
When service center repair touchscreen or touchpad will change
compatible device not specific one, the fw_config probe mechanism is not
convenient for service center. Removing touchscreen and touchpad
fw_config probe for the purpose.
BUG=b:297840605
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I66f12ae478f74c019c53ee5e77f7e0f9c324e758
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77538
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/google/brya/variants/uldren/overridetree.cb b/src/mainboard/google/brya/variants/uldren/overridetree.cb
index 65c8151..829f877 100644
--- a/src/mainboard/google/brya/variants/uldren/overridetree.cb
+++ b/src/mainboard/google/brya/variants/uldren/overridetree.cb
@@ -222,10 +222,7 @@
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x20"
- device i2c 2c on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_WDT8752A
- end
+ device i2c 2c on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
@@ -241,10 +238,7 @@
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
- device i2c 10 on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_EKTH5012
- end
+ device i2c 10 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""ELAN900C""
@@ -260,10 +254,7 @@
register "generic.enable_delay_ms" = "6"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
- device i2c 16 on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_EKTH7D18
- end
+ device i2c 16 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GXTP7996""
@@ -278,10 +269,7 @@
register "generic.enable_delay_ms" = "10"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
- device i2c 5d on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_GT7996F
- end
+ device i2c 5d on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7502""
@@ -296,10 +284,7 @@
register "generic.enable_delay_ms" = "30"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
- device i2c 40 on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_GTCH7502
- end
+ device i2c 40 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""WDHT2601""
@@ -314,10 +299,7 @@
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x20"
- device i2c 3c on
- probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN
- probe TOUCHSCREEN TOUCHSCREEN_WDT8790A
- end
+ device i2c 3c on end
end
end
device ref i2c3 on
@@ -345,10 +327,7 @@
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
register "wake" = "GPE0_DW2_14"
register "detect" = "1"
- device i2c 15 on
- probe TOUCHPAD TOUCHPAD_UNKNOWN
- probe TOUCHPAD TOUCHPAD_EKT3744
- end
+ device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GXTP7863""
@@ -357,10 +336,7 @@
register "generic.wake" = "GPE0_DW2_14"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
- device i2c 2c on
- probe TOUCHPAD TOUCHPAD_UNKNOWN
- probe TOUCHPAD TOUCHPAD_GT7863
- end
+ device i2c 2c on end
end
end
device ref pcie_rp7 off end