mb/google/brya/var/vell: Move SPK0/SPK1 to I2C7
To support speaker AMP CS35L53-CWZR'S I2C needs to split to two
I2C ports
BUG=b:207333035
BRANCH=none
TEST=built and verified speaker
Signed-off-by: Eddy Lu <eddylu@ami.corp-partner.google.com>
Change-Id: I8095abc4fc3233b21b818a508c84cd59b39fc1d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb
index 7cbdb5e..f40b52b 100644
--- a/src/mainboard/google/brya/variants/vell/overridetree.cb
+++ b/src/mainboard/google/brya/variants/vell/overridetree.cb
@@ -226,28 +226,12 @@
end
device ref i2c0 on
chip drivers/i2c/cs35l53
- register "name" = ""SPK0""
- register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
- register "boost_type" = "EXTERNAL_BOOST"
- register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
- register "gpio1_output_enable" = "true"
- register "gpio1_src_select" = "GPIO1_SRC_GPIO"
- register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
- device i2c 0x40 on end
- end
- chip drivers/i2c/cs35l53
- register "name" = ""SPK1""
- register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
- register "boost_type" = "EXTERNAL_BOOST"
- register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
- register "gpio1_output_enable" = "true"
- register "gpio1_src_select" = "GPIO1_SRC_GPIO"
- register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
- device i2c 0x41 on end
- end
- chip drivers/i2c/cs35l53
register "name" = ""SPK2""
+ register "sub" = ""103CA221""
+ register "desc" = ""Cirrus Logic CS35L53 Tweeter Right Audio Codec""
+ register "uid" = "3"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
@@ -257,7 +241,11 @@
end
chip drivers/i2c/cs35l53
register "name" = ""SPK3""
+ register "sub" = ""103CA221""
+ register "desc" = ""Cirrus Logic CS35L53 Woofer Right Audio Codec""
+ register "uid" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
@@ -362,7 +350,36 @@
device i2c 15 on end
end
end
- device ref i2c7 on end
+ device ref i2c7 on
+ chip drivers/i2c/cs35l53
+ register "name" = ""SPK0""
+ register "sub" = ""103CA221""
+ register "desc" = ""Cirrus Logic CS35L53 Tweeter Left Audio Codec""
+ register "uid" = "2"
+ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+ register "boost_type" = "EXTERNAL_BOOST"
+ register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+ register "gpio1_output_enable" = "true"
+ register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+ register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+ device i2c 0x40 on end
+ end
+ chip drivers/i2c/cs35l53
+ register "name" = ""SPK1""
+ register "sub" = ""103CA221""
+ register "desc" = ""Cirrus Logic CS35L53 Woofer Left Audio Codec""
+ register "uid" = "0"
+ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+ register "boost_type" = "EXTERNAL_BOOST"
+ register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
+ register "gpio1_output_enable" = "true"
+ register "gpio1_src_select" = "GPIO1_SRC_GPIO"
+ register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
+ device i2c 0x41 on end
+ end
+ end
device ref gspi1 on
chip drivers/spi/acpi
register "name" = ""CRFP""