Move the nvramtool manpage to section 8 (as it's only really usable as root),
as we've done with the superiotool and flashrom manpages, too (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/util/nvramtool/nvramtool.8 b/util/nvramtool/nvramtool.8
new file mode 100644
index 0000000..985d1a6
--- /dev/null
+++ b/util/nvramtool/nvramtool.8
@@ -0,0 +1,254 @@
+.\"***************************************************************************\
+.\" nvramtool.8
+.\"***************************************************************************
+.\" Copyright (C) 2002, 2003 The Regents of the University of California.
+.\" Produced at the Lawrence Livermore National Laboratory.
+.\" Written by David S. Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>.
+.\" UCRL-CODE-2003-012
+.\" All rights reserved.
+.\"
+.\" This file is part of nvramtool, a utility for reading/writing coreboot
+.\" parameters and displaying information from the coreboot table.
+.\" For details, see http://coreboot.org/nvramtool.
+.\"
+.\" Please also read the file DISCLAIMER which is included in this software
+.\" distribution.
+.\"
+.\" This program is free software; you can redistribute it and/or modify it
+.\" under the terms of the GNU General Public License (as published by the
+.\" Free Software Foundation) version 2, dated June 1991.
+.\"
+.\" This program is distributed in the hope that it will be useful, but
+.\" WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and
+.\" conditions of the GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License along
+.\" with this program; if not, write to the Free Software Foundation, Inc.,
+.\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+.\"***************************************************************************/
+.TH NVRAMTOOL 8 "September 2008"
+.SH NAME
+nvramtool \- read/write coreboot-related information
+.SH SYNOPSIS
+.B "nvramtool [OPTS] [-n] -r NAME"
+.br
+.B "nvramtool [OPTS] -e NAME"
+.br
+.B "nvramtool [OPTS] -a"
+.br
+.B "nvramtool [OPTS] -w NAME=VALUE"
+.br
+.B "nvramtool [OPTS] -p INPUT_FILE"
+.br
+.B "nvramtool [OPTS] -i"
+.br
+.B "nvramtool [OPTS] -c [VALUE]"
+.br
+.B "nvramtool [OPTS] -l [ARG]"
+.br
+.B "nvramtool [OPTS] -d"
+.br
+.B "nvramtool [OPTS] -Y"
+.br
+.B "nvramtool [OPTS] -b OUTPUT_FILE"
+.br
+.B "nvramtool [OPTS] -B INPUT_FILE"
+.br
+.B "nvramtool [OPTS] -x"
+.br
+.B "nvramtool [OPTS] -X DUMPFILE"
+.br
+.B "nvramtool [OPTS] -v"
+.br
+.B "nvramtool [OPTS] -h"
+.SH DESCRIPTION
+.B "nvramtool"
+is a utility for reading/writing coreboot parameters and displaying
+information from the coreboot table.
+
+The coreboot table resides in low physical memory. It is created at boot
+time by coreboot, and contains various system information such as the type
+of mainboard in use. It specifies locations in the CMOS (nonvolatile RAM)
+where the coreboot parameters are stored.
+
+This program is intended for (x86-based) systems that use coreboot. For
+information about coreboot, see
+.br
+http://www.coreboot.org/.
+.SH PARAMETERS
+.TP
+.B "[-n] -r NAME"
+Show the value of the coreboot parameter given by
+.B "NAME."
+If
+.B "-n"
+is specified, show only the value. Otherwise show both parameter name and
+value.
+.TP
+.B "-e NAME"
+Show all possible values for parameter given by
+.B "NAME."
+.TP
+.B "-a"
+Show the names and values for all coreboot parameters.
+.TP
+.B "-w NAME=VALUE"
+Assign
+.B "VALUE"
+to coreboot parameter given by
+.B "NAME."
+.TP
+.B "-p INPUT_FILE"
+Assign values to coreboot parameters according to the contents of
+.B "INPUT_FILE."
+The format of this file is described below.
+.TP
+.B "-i"
+This is similar to the
+.B "-p"
+option, except that the contents of the input file are taken from standard
+input.
+.TP
+.B "-c [VALUE]"
+If
+.B "VALUE"
+is present then set the CMOS checksum for the coreboot parameters to
+.B "VALUE."
+Otherwise, show the checksum value.
+.TP
+.B "-l [ARG]"
+If
+.B "ARG"
+is present then show information from the coreboot table as specified by
+.B "ARG."
+Otherwise show all possible values for
+.B "ARG."
+.TP
+.B "-d"
+Do a low-level dump of the coreboot table.
+.TP
+.B "-Y"
+Write CMOS layout information to standard output. If redirected to a file,
+the layout information may be used as input for the
+.B "'-y LAYOUT_FILE'"
+option (see below).
+.TP
+.B "-b OUTPUT_FILE"
+Write the contents of CMOS memory to the binary file
+.B "OUTPUT_FILE."
+The first 14 bytes of
+.B "OUTPUT_FILE"
+do not contain actual CMOS data, and are always written as zeros. This is
+because the first 14 bytes of the CMOS area do not contain CMOS memory. These
+bytes are involved with the functioning of the real time clock.
+.TP
+.B "-B INPUT_FILE"
+Read binary data from
+.B "INPUT_FILE"
+and write the data to CMOS memory. The first 14 bytes of
+.B "INPUT_FILE"
+are skipped and data is written to CMOS starting at the 15th byte of the CMOS
+area. This is because the first 14 bytes of the CMOS area do not contain CMOS
+memory. These bytes are involved with the functioning of the real time clock.
+.TP
+.B "-x"
+Show a hex dump of all CMOS data. The first 14 bytes of the dump do not
+contain actual CMOS data, and are always shown as zeros. This is because the
+first 14 bytes of the CMOS area do not contain CMOS memory. These bytes are
+involved with the functioning of the real time clock.
+.TP
+.B "-X DUMPFILE"
+Read binary data from
+.B "DUMPFILE"
+(presumably a CMOS dumpfile created using the
+.B "-b OUTPUT_FILE"
+option) and show a hex dump of the data.
+.TP
+.B "-v"
+Show version information for this program.
+.TP
+.B "-h"
+Show a help message for this program.
+.SH "OPTIONS"
+In all cases above,
+.B "[OPTS]"
+evaluates to the following:
+
+.B " [-y LAYOUT_FILE | -t]"
+
+The
+.B "'-y LAYOUT_FILE'"
+option tells nvramtool to obtain CMOS layout information from the contents of
+.B "LAYOUT_FILE."
+Likewise, the
+.B "'-t'"
+option tells nvramtool to obtain CMOS layout information from the CMOS option
+table (contained within the coreboot table). If neither option is
+specified, the CMOS option table is used by default.
+.B "LAYOUT_FILE"
+follows the format of the
+.B "cmos.layout"
+files provided by coreboot.
+
+If the coreboot installed on your system was built without specifying
+.B "HAVE_OPTION_TABLE,"
+then the coreboot table will not contain a CMOS option table. In this case,
+the
+.B "'-y LAYOUT_FILE'"
+option must be used.
+
+These two options are silently ignored when used in combination with other
+options (such as
+.B "-h,"
+for instance) for which they are not applicable.
+.SH FILE FORMAT
+For the
+.B "-p"
+option,
+.B "INPUT_FILE"
+must consist of a sequence of lines such that each line is either a blank
+line, a comment, or an assignment. A blank line consists only of zero or
+more whitespace characters (spaces and tabs). A comment is constructed as
+follows:
+
+.B " [ws]#[text]"
+
+Here,
+.B "[ws]"
+indicates optional whitespace characters and
+.B "[text]"
+indicates optional text. Blank lines and comments are both ignored. An
+assignment is constructed as follows:
+
+.B " [ws]NAME[ws]=[ws]VALUE[ws]"
+
+Here,
+.B "NAME"
+is the name of a coreboot parameter and
+.B "VALUE"
+is the value that will be assigned to
+.B "NAME."
+.B "VALUE"
+is allowed to contain whitespace characters, but it must begin and end with
+nonwhitespace characters. Note that each comment must appear on a line by
+itself. If you attempt to add a comment to the end of an assignment, then the
+comment will be interpreted as part of
+.B "VALUE."
+It is useful to observe that the output produced by both the
+.B "-a"
+and the
+.B "'[-n] NAME'"
+options (without
+.B "-n"
+specified) adheres to this file format.
+.SH BUGS
+This program does not implement any type of synchronization to ensure that
+different processes don't stomp on each other when trying to access the
+nonvolatile RAM simultaneously. Therefore, corruption of the BIOS parameter
+values may occur if multiple instances of this program are executed
+concurrently.
+.SH AUTHORS
+David S. Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
+.br
+Stefan Reinauer <stepan@coresystems.de>