| /** @file |
| This file contains definitions required for creation of |
| Memory S3 Save data, Memory Info data and Memory Platform |
| data hobs. |
| |
| @copyright |
| Copyright (c) 1999 - 2019, Intel Corporation. All rights reserved.<BR> |
| This program and the accompanying materials are licensed and made available under |
| the terms and conditions of the BSD License that accompanies this distribution. |
| The full text of the license may be found at |
| http://opensource.org/licenses/bsd-license.php. |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, |
| |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. |
| |
| @par Specification Reference: |
| **/ |
| #ifndef _MEM_INFO_HOB_H_ |
| #define _MEM_INFO_HOB_H_ |
| |
| #include <Uefi/UefiMultiPhase.h> |
| #include <Pi/PiBootMode.h> |
| #include <Pi/PiHob.h> |
| |
| #pragma pack (push, 1) |
| |
| extern EFI_GUID gSiMemoryS3DataGuid; |
| extern EFI_GUID gSiMemoryInfoDataGuid; |
| extern EFI_GUID gSiMemoryPlatformDataGuid; |
| |
| #define MAX_TRACE_CACHE_TYPE 3 |
| |
| #define MAX_NODE 2 |
| #define MAX_CH 4 |
| #define MAX_DIMM 2 |
| |
| /// |
| /// Host reset states from MRC. |
| /// |
| #define WARM_BOOT 2 |
| |
| #define R_MC_CHNL_RANK_PRESENT 0x7C |
| #define B_RANK0_PRS BIT0 |
| #define B_RANK1_PRS BIT1 |
| #define B_RANK2_PRS BIT4 |
| #define B_RANK3_PRS BIT5 |
| |
| // @todo remove and use the MdePkg\Include\Pi\PiHob.h |
| #if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) |
| #ifndef __HOB__H__ |
| typedef struct _EFI_HOB_GENERIC_HEADER { |
| UINT16 HobType; |
| UINT16 HobLength; |
| UINT32 Reserved; |
| } EFI_HOB_GENERIC_HEADER; |
| |
| typedef struct _EFI_HOB_GUID_TYPE { |
| EFI_HOB_GENERIC_HEADER Header; |
| EFI_GUID Name; |
| /// |
| /// Guid specific data goes here |
| /// |
| } EFI_HOB_GUID_TYPE; |
| #endif |
| #endif |
| |
| /// |
| /// Defines taken from MRC so avoid having to include MrcInterface.h |
| /// |
| |
| // |
| // Matches MAX_SPD_SAVE define in MRC |
| // |
| #ifndef MAX_SPD_SAVE |
| #define MAX_SPD_SAVE 29 |
| #endif |
| |
| // |
| // MRC version description. |
| // |
| typedef struct { |
| UINT8 Major; ///< Major version number |
| UINT8 Minor; ///< Minor version number |
| UINT8 Rev; ///< Revision number |
| UINT8 Build; ///< Build number |
| } SiMrcVersion; |
| |
| // |
| // Matches MrcChannelSts enum in MRC |
| // |
| #ifndef CHANNEL_NOT_PRESENT |
| #define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. |
| #endif |
| #ifndef CHANNEL_DISABLED |
| #define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. |
| #endif |
| #ifndef CHANNEL_PRESENT |
| #define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. |
| #endif |
| |
| // |
| // Matches MrcDimmSts enum in MRC |
| // |
| #ifndef DIMM_ENABLED |
| #define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. |
| #endif |
| #ifndef DIMM_DISABLED |
| #define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. |
| #endif |
| #ifndef DIMM_PRESENT |
| #define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. |
| #endif |
| #ifndef DIMM_NOT_PRESENT |
| #define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. |
| #endif |
| |
| // |
| // Matches MrcBootMode enum in MRC |
| // |
| #ifndef __MRC_BOOT_MODE__ |
| #define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h |
| #ifndef INT32_MAX |
| #define INT32_MAX (0x7FFFFFFF) |
| #endif //INT32_MAX |
| typedef enum { |
| bmCold, ///< Cold boot |
| bmWarm, ///< Warm boot |
| bmS3, ///< S3 resume |
| bmFast, ///< Fast boot |
| MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. |
| MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. |
| } MRC_BOOT_MODE; |
| #endif //__MRC_BOOT_MODE__ |
| |
| // |
| // Matches MrcDdrType enum in MRC |
| // |
| #ifndef MRC_DDR_TYPE_DDR4 |
| #define MRC_DDR_TYPE_DDR4 0 |
| #endif |
| #ifndef MRC_DDR_TYPE_DDR3 |
| #define MRC_DDR_TYPE_DDR3 1 |
| #endif |
| #ifndef MRC_DDR_TYPE_LPDDR3 |
| #define MRC_DDR_TYPE_LPDDR3 2 |
| #endif |
| #ifndef MRC_DDR_TYPE_LPDDR4 |
| #define MRC_DDR_TYPE_LPDDR4 3 |
| #endif |
| #ifndef MRC_DDR_TYPE_WIO2 |
| #define MRC_DDR_TYPE_WIO2 4 |
| #endif |
| #ifndef MRC_DDR_TYPE_UNKNOWN |
| #define MRC_DDR_TYPE_UNKNOWN 5 |
| #endif |
| |
| #define MAX_PROFILE_NUM 4 // number of memory profiles supported |
| #define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported |
| |
| // |
| // DIMM timings |
| // |
| typedef struct { |
| UINT32 tCK; ///< Memory cycle time, in femtoseconds. |
| UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. |
| UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. |
| UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. |
| UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. |
| UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. |
| UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. |
| UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. |
| UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. |
| UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. |
| UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. |
| UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. |
| UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. |
| UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. |
| UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. |
| UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. |
| UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. |
| UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. |
| UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. |
| UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. |
| UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. |
| UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. |
| } MRC_CH_TIMING; |
| |
| /// |
| /// Memory SMBIOS & OC Memory Data Hob |
| /// |
| typedef struct { |
| UINT8 Status; ///< See MrcDimmStatus for the definition of this field. |
| UINT8 DimmId; |
| UINT32 DimmCapacity; ///< DIMM size in MBytes. |
| UINT16 MfgId; |
| UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes |
| UINT8 RankInDimm; ///< The number of ranks in this DIMM. |
| UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. |
| UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. |
| UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. |
| UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. |
| UINT16 Speed; ///< The maximum capable speed of the device, in MHz |
| UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. |
| } DIMM_INFO; |
| |
| typedef struct { |
| UINT8 Status; ///< Indicates whether this channel should be used. |
| UINT8 ChannelId; |
| UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. |
| MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. |
| DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. |
| } CHANNEL_INFO; |
| |
| typedef struct { |
| UINT8 Status; ///< Indicates whether this controller should be used. |
| UINT16 DeviceId; ///< The PCI device id of this memory controller. |
| UINT8 RevisionId; ///< The PCI revision id of this memory controller. |
| UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. |
| CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. |
| } CONTROLLER_INFO; |
| |
| typedef struct { |
| UINT64 BaseAddress; ///< Trace Base Address |
| UINT64 TotalSize; ///< Total Trace Region of Same Cache type |
| UINT8 CacheType; ///< Trace Cache Type |
| UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code |
| UINT8 Rsvd[2]; |
| } PSMI_MEM_INFO; |
| |
| typedef struct { |
| UINT8 Revision; |
| UINT16 DataWidth; ///< Data width, in bits, of this memory device |
| /** As defined in SMBIOS 3.0 spec |
| Section 7.18.2 and Table 75 |
| **/ |
| UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 |
| UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) |
| UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) |
| /** As defined in SMBIOS 3.0 spec |
| Section 7.17.3 and Table 72 |
| **/ |
| UINT8 ErrorCorrectionType; |
| |
| SiMrcVersion Version; |
| BOOLEAN EccSupport; |
| UINT8 MemoryProfile; |
| UINT32 TotalPhysicalMemorySize; |
| UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. |
| UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. |
| UINT8 Ratio; |
| UINT8 RefClk; |
| UINT32 VddVoltage[MAX_PROFILE_NUM]; |
| CONTROLLER_INFO Controller[MAX_NODE]; |
| } MEMORY_INFO_DATA_HOB; |
| |
| /** |
| Memory Platform Data Hob |
| |
| <b>Revision 1:</b> |
| - Initial version. |
| <b>Revision 2:</b> |
| - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields |
| **/ |
| typedef struct { |
| UINT8 Revision; |
| UINT8 Reserved[3]; |
| UINT32 BootMode; |
| UINT32 TsegSize; |
| UINT32 TsegBase; |
| UINT32 PrmrrSize; |
| UINT64 PrmrrBase; |
| UINT32 PramSize; |
| UINT64 PramBase; |
| UINT64 DismLimit; |
| UINT64 DismBase; |
| UINT32 GttBase; |
| UINT32 MmioSize; |
| UINT32 PciEBaseAddress; |
| PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; |
| } MEMORY_PLATFORM_DATA; |
| |
| typedef struct { |
| EFI_HOB_GUID_TYPE EfiHobGuidType; |
| MEMORY_PLATFORM_DATA Data; |
| UINT8 *Buffer; |
| } MEMORY_PLATFORM_DATA_HOB; |
| |
| #pragma pack (pop) |
| |
| #endif // _MEM_INFO_HOB_H_ |