vc/intel/fsp2_0/tigerlake: Remove unused headers
These headers are unused since CB:48713. Therefore, remove them.
Change-Id: Id1bd074015769a33d98bb83134eb56b9de281d20
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48714
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h
deleted file mode 100644
index 98a16d7..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/** @file
- Header file for Firmware Version Information
-
- @copyright
- Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License which accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _FIRMWARE_VERSION_INFO_HOB_H_
-#define _FIRMWARE_VERSION_INFO_HOB_H_
-
-#include <Uefi/UefiMultiPhase.h>
-#include <Pi/PiBootMode.h>
-#include <Pi/PiHob.h>
-
-#pragma pack(1)
-///
-/// Firmware Version Structure
-///
-typedef struct {
- UINT8 MajorVersion;
- UINT8 MinorVersion;
- UINT8 Revision;
- UINT16 BuildNumber;
-} FIRMWARE_VERSION;
-
-///
-/// Firmware Version Information Structure
-///
-typedef struct {
- UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name
- UINT8 VersionStringIndex; ///< Offset 1 Index of Version String
- FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version
-} FIRMWARE_VERSION_INFO;
-
-#ifndef __SMBIOS_STANDARD_H__
-///
-/// The Smbios structure header.
-///
-typedef struct {
- UINT8 Type;
- UINT8 Length;
- UINT16 Handle;
-} SMBIOS_STRUCTURE;
-#endif
-
-///
-/// Firmware Version Information HOB Structure
-///
-typedef struct {
- EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB
- SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB
- UINT8 Count; ///< Offset 28 Number of FVI elements included.
-///
-/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer
-///
-} FIRMWARE_VERSION_INFO_HOB;
-#pragma pack()
-
-#endif // _FIRMWARE_VERSION_INFO_HOB_H_
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h
deleted file mode 100644
index 235780a..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/** @file
-
-Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPUPD_H__
-#define __FSPUPD_H__
-
-#include <FspEas.h>
-
-#pragma pack(1)
-
-#define FSPT_UPD_SIGNATURE 0x545F4450554C4754 /* 'TGLUPD_T' */
-
-#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4754 /* 'TGLUPD_M' */
-
-#define FSPS_UPD_SIGNATURE 0x535F4450554C4754 /* 'TGLUPD_S' */
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
deleted file mode 100644
index 6210f3c..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
+++ /dev/null
@@ -1,3543 +0,0 @@
-/** @file
-
-Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPMUPD_H__
-#define __FSPMUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-
-#include <MemInfoHob.h>
-
-///
-/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
-///
-typedef struct {
- UINT8 Revision; ///< Chipset Init Info Revision
- UINT8 Rsvd[3]; ///< Reserved
- UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
- UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
-} CHIPSET_INIT_INFO;
-
-
-/** Fsp M Configuration
-**/
-typedef struct {
-
-/** Offset 0x0040 - Platform Reserved Memory Size
- The minimum platform memory size required to pass control into DXE
-**/
- UINT64 PlatformMemorySize;
-
-/** Offset 0x0048 - SPD Data Length
- Length of SPD Data
- 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes
-**/
- UINT16 MemorySpdDataLen;
-
-/** Offset 0x004A - Enable above 4GB MMIO resource support
- Enable/disable above 4GB MMIO resource support
- $EN_DIS
-**/
- UINT8 EnableAbove4GBMmio;
-
-/** Offset 0x004B - Enable/Disable CrashLog Device 10
- Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog
- $EN_DIS
-**/
- UINT8 CpuCrashLogDevice;
-
-/** Offset 0x004C - MemorySpdPtr00
-**/
- UINT32 MemorySpdPtr00;
-
-/** Offset 0x0050 - MemorySpdPtr01
-**/
- UINT32 MemorySpdPtr01;
-
-/** Offset 0x0054 - MemorySpdPtr02
-**/
- UINT32 MemorySpdPtr02;
-
-/** Offset 0x0058 - MemorySpdPtr03
-**/
- UINT32 MemorySpdPtr03;
-
-/** Offset 0x005C - MemorySpdPtr04
-**/
- UINT32 MemorySpdPtr04;
-
-/** Offset 0x0060 - MemorySpdPtr05
-**/
- UINT32 MemorySpdPtr05;
-
-/** Offset 0x0064 - MemorySpdPtr06
-**/
- UINT32 MemorySpdPtr06;
-
-/** Offset 0x0068 - MemorySpdPtr07
-**/
- UINT32 MemorySpdPtr07;
-
-/** Offset 0x006C - MemorySpdPtr08
-**/
- UINT32 MemorySpdPtr08;
-
-/** Offset 0x0070 - MemorySpdPtr09
-**/
- UINT32 MemorySpdPtr09;
-
-/** Offset 0x0074 - MemorySpdPtr10
-**/
- UINT32 MemorySpdPtr10;
-
-/** Offset 0x0078 - MemorySpdPtr11
-**/
- UINT32 MemorySpdPtr11;
-
-/** Offset 0x007C - MemorySpdPtr12
-**/
- UINT32 MemorySpdPtr12;
-
-/** Offset 0x0080 - MemorySpdPtr13
-**/
- UINT32 MemorySpdPtr13;
-
-/** Offset 0x0084 - MemorySpdPtr14
-**/
- UINT32 MemorySpdPtr14;
-
-/** Offset 0x0088 - MemorySpdPtr15
-**/
- UINT32 MemorySpdPtr15;
-
-/** Offset 0x008C - RcompResistor settings
- Indicates RcompResistor settings: Board-dependent
-**/
- UINT16 RcompResistor;
-
-/** Offset 0x008E - RcompTarget settings
- RcompTarget settings: board-dependent
-**/
- UINT16 RcompTarget[5];
-
-/** Offset 0x0098 - DqsMapCpu2DramCh0
-**/
- UINT8 DqsMapCpu2DramCh0[2];
-
-/** Offset 0x009A - DqsMapCpu2DramCh1
-**/
- UINT8 DqsMapCpu2DramCh1[2];
-
-/** Offset 0x009C - DqsMapCpu2DramCh2
-**/
- UINT8 DqsMapCpu2DramCh2[2];
-
-/** Offset 0x009E - DqsMapCpu2DramCh3
-**/
- UINT8 DqsMapCpu2DramCh3[2];
-
-/** Offset 0x00A0 - DqsMapCpu2DramCh4
-**/
- UINT8 DqsMapCpu2DramCh4[2];
-
-/** Offset 0x00A2 - DqsMapCpu2DramCh5
-**/
- UINT8 DqsMapCpu2DramCh5[2];
-
-/** Offset 0x00A4 - DqsMapCpu2DramCh6
-**/
- UINT8 DqsMapCpu2DramCh6[2];
-
-/** Offset 0x00A6 - DqsMapCpu2DramCh7
-**/
- UINT8 DqsMapCpu2DramCh7[2];
-
-/** Offset 0x00A8 - DqMapCpu2DramCh0
-**/
- UINT8 DqMapCpu2DramCh0[16];
-
-/** Offset 0x00B8 - DqMapCpu2DramCh1
-**/
- UINT8 DqMapCpu2DramCh1[16];
-
-/** Offset 0x00C8 - DqMapCpu2DramCh2
-**/
- UINT8 DqMapCpu2DramCh2[16];
-
-/** Offset 0x00D8 - DqMapCpu2DramCh3
-**/
- UINT8 DqMapCpu2DramCh3[16];
-
-/** Offset 0x00E8 - DqMapCpu2DramCh4
-**/
- UINT8 DqMapCpu2DramCh4[16];
-
-/** Offset 0x00F8 - DqMapCpu2DramCh5
-**/
- UINT8 DqMapCpu2DramCh5[16];
-
-/** Offset 0x0108 - DqMapCpu2DramCh6
-**/
- UINT8 DqMapCpu2DramCh6[16];
-
-/** Offset 0x0118 - DqMapCpu2DramCh7
-**/
- UINT8 DqMapCpu2DramCh7[16];
-
-/** Offset 0x0128 - Dqs Pins Interleaved Setting
- Indicates DqPinsInterleaved setting: board-dependent
- $EN_DIS
-**/
- UINT8 DqPinsInterleaved;
-
-/** Offset 0x0129 - Smram Mask
- The SMM Regions AB-SEG and/or H-SEG reserved
- 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
-**/
- UINT8 SmramMask;
-
-/** Offset 0x012A - MRC Fast Boot
- Enables/Disable the MRC fast path thru the MRC
- $EN_DIS
-**/
- UINT8 MrcFastBoot;
-
-/** Offset 0x012B - Rank Margin Tool per Task
- This option enables the user to execute Rank Margin Tool per major training step
- in the MRC.
- $EN_DIS
-**/
- UINT8 RmtPerTask;
-
-/** Offset 0x012C - Training Trace
- This option enables the trained state tracing feature in MRC. This feature will
- print out the key training parameters state across major training steps.
- $EN_DIS
-**/
- UINT8 TrainTrace;
-
-/** Offset 0x012D
-**/
- UINT8 UnusedUpdSpace0[3];
-
-/** Offset 0x0130 - Intel Enhanced Debug
- <b>@deprecated</b> - Not used and has no effect
- 0 : Disable, 0x400000 : Enable
-**/
- UINT32 IedSize;
-
-/** Offset 0x0134 - Tseg Size
- Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
- 0x0400000:4MB, 0x01000000:16MB
-**/
- UINT32 TsegSize;
-
-/** Offset 0x0138 - MMIO Size
- Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
-**/
- UINT16 MmioSize;
-
-/** Offset 0x013A - Probeless Trace
- Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
- This also requires IED to be enabled.
- $EN_DIS
-**/
- UINT8 ProbelessTrace;
-
-/** Offset 0x013B - Enable SMBus
- Enable/disable SMBus controller.
- $EN_DIS
-**/
- UINT8 SmbusEnable;
-
-/** Offset 0x013C - Spd Address Tabl
- Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
- if SPD Address is 00
-**/
- UINT8 SpdAddressTable[16];
-
-/** Offset 0x014C - Platform Debug Consent
- To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type.
- Enabling this BIOS option may alter the default value of other debug-related BIOS
- options.\Manual: Do not use Platform Debug Consent to override other debug-relevant
- policies, but the user must set each debug option manually, aimed at advanced users.\n
- Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting.
- 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC),
- 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual
-**/
- UINT8 PlatformDebugConsent;
-
-/** Offset 0x014D - DCI Enable
- Determine if to enable DCI debug from host
- $EN_DIS
-**/
- UINT8 DciEn;
-
-/** Offset 0x014E - DCI DbC Mode
- Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
- Set both USB2/3DBCEN; No Change: Comply with HW value
- 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
-**/
- UINT8 DciDbcMode;
-
-/** Offset 0x014F - Enable DCI ModPHY Power Gate
- Enable ModPHY Power Gate when DCI is enabled
- $EN_DIS
-**/
- UINT8 DciModphyPg;
-
-/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
- This BIOS option enables kernel and platform debug for USB3 interface over a UFP
- Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
- 0:Disabled, 1:Enabled, 2:No Change
-**/
- UINT8 DciUsb3TypecUfpDbg;
-
-/** Offset 0x0151 - PCH Trace Hub Mode
- Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
- if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
- 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode
-**/
- UINT8 PchTraceHubMode;
-
-/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size
- Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
- 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
- 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
-**/
- UINT8 PchTraceHubMemReg0Size;
-
-/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size
- Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
- 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
- 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
-**/
- UINT8 PchTraceHubMemReg1Size;
-
-/** Offset 0x0154 - HD Audio DMIC Link Clock Select
- Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB
- 0: Both, 1: ClkA, 2: ClkB
-**/
- UINT8 PchHdaAudioLinkDmicClockSelect[2];
-
-/** Offset 0x0156 - PchPreMemRsvd
- Reserved for PCH Pre-Mem Reserved
- $EN_DIS
-**/
- UINT8 PchPreMemRsvd[5];
-
-/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table
- 0=Disable/Clear, 1=Enable/Set
- $EN_DIS
-**/
- UINT8 X2ApicOptOut;
-
-/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
- 0=Disable/Clear, 1=Enable/Set
- $EN_DIS
-**/
- UINT8 DmaControlGuarantee;
-
-/** Offset 0x015D
-**/
- UINT8 UnusedUpdSpace1[3];
-
-/** Offset 0x0160 - Base addresses for VT-d function MMIO access
- Base addresses for VT-d MMIO access per VT-d engine
-**/
- UINT32 VtdBaseAddress[9];
-
-/** Offset 0x0184 - Disable VT-d
- 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
- $EN_DIS
-**/
- UINT8 VtdDisable;
-
-/** Offset 0x0185 - Vtd Programming for Igd
- 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar
- programming disabled)
- $EN_DIS
-**/
- UINT8 VtdIgdEnable;
-
-/** Offset 0x0186 - Vtd Programming for Ipu
- 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar
- programming disabled)
- $EN_DIS
-**/
- UINT8 VtdIpuEnable;
-
-/** Offset 0x0187 - Vtd Programming for Iop
- 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar
- programming disabled)
- $EN_DIS
-**/
- UINT8 VtdIopEnable;
-
-/** Offset 0x0188 - Vtd Programming for ITbt
- 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar
- programming disabled)
- $EN_DIS
-**/
- UINT8 VtdItbtEnable;
-
-/** Offset 0x0189 - Internal Graphics Pre-allocated Memory
- Size of memory preallocated for internal graphics.
- 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB,
- 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB,
- 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB
-**/
- UINT8 IgdDvmt50PreAlloc;
-
-/** Offset 0x018A - Internal Graphics
- Enable/disable internal graphics.
- $EN_DIS
-**/
- UINT8 InternalGfx;
-
-/** Offset 0x018B - Aperture Size
- Select the Aperture Size.
- 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB
-**/
- UINT8 ApertureSize;
-
-/** Offset 0x018C - Board Type
- MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
- Halo, 7=UP Server
- 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server
-**/
- UINT8 UserBd;
-
-/** Offset 0x018D
-**/
- UINT8 UnusedUpdSpace2;
-
-/** Offset 0x018E - DDR Frequency Limit
- Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
- 2133, 2400, 2667, 2933 and 0 for Auto.
- 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
-**/
- UINT16 DdrFreqLimit;
-
-/** Offset 0x0190 - SA GV
- System Agent dynamic frequency support and when enabled memory will be training
- at three different frequencies.
- 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled
-**/
- UINT8 SaGv;
-
-/** Offset 0x0191 - Memory Test on Warm Boot
- Run Base Memory Test on Warm Boot
- 0:Disable, 1:Enable
-**/
- UINT8 MemTestOnWarmBoot;
-
-/** Offset 0x0192 - DDR Speed Control
- DDR Frequency and Gear control for all SAGV points.
- 0:Auto, 1:Manual
-**/
- UINT8 DdrSpeedControl;
-
-/** Offset 0x0193 - Rank Margin Tool
- Enable/disable Rank Margin Tool.
- $EN_DIS
-**/
- UINT8 RMT;
-
-/** Offset 0x0194 - DisableDimmCh0
-**/
- UINT8 DisableDimmCh0;
-
-/** Offset 0x0195 - DisableDimmCh1
-**/
- UINT8 DisableDimmCh1;
-
-/** Offset 0x0196 - DisableDimmCh2
-**/
- UINT8 DisableDimmCh2;
-
-/** Offset 0x0197 - DisableDimmCh3
-**/
- UINT8 DisableDimmCh3;
-
-/** Offset 0x0198 - DisableDimmCh4
-**/
- UINT8 DisableDimmCh4;
-
-/** Offset 0x0199 - DisableDimmCh5
-**/
- UINT8 DisableDimmCh5;
-
-/** Offset 0x019A - DisableDimmCh6
-**/
- UINT8 DisableDimmCh6;
-
-/** Offset 0x019B - DisableDimmCh7
-**/
- UINT8 DisableDimmCh7;
-
-/** Offset 0x019C - Scrambler Support
- This option enables data scrambling in memory.
- $EN_DIS
-**/
- UINT8 ScramblerSupport;
-
-/** Offset 0x019D - SPD Profile Selected
- Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP
- Profile 1, 3=XMP Profile 2
- 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2
-**/
- UINT8 SpdProfileSelected;
-
-/** Offset 0x019E - Memory Reference Clock
- 100MHz, 133MHz.
- 0:133MHz, 1:100MHz
-**/
- UINT8 RefClk;
-
-/** Offset 0x019F
-**/
- UINT8 UnusedUpdSpace3;
-
-/** Offset 0x01A0 - Memory Voltage
- DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
- chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
- 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
- Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts
-**/
- UINT16 VddVoltage;
-
-/** Offset 0x01A2 - Memory Ratio
- Automatic or the frequency will equal ratio times reference clock. Set to Auto to
- recalculate memory timings listed below.
- 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
-**/
- UINT8 Ratio;
-
-/** Offset 0x01A3 - tCL
- CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT8 tCL;
-
-/** Offset 0x01A4 - tCWL
- Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT8 tCWL;
-
-/** Offset 0x01A5
-**/
- UINT8 UnusedUpdSpace4;
-
-/** Offset 0x01A6 - tFAW
- Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT16 tFAW;
-
-/** Offset 0x01A8 - tRAS
- RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT16 tRAS;
-
-/** Offset 0x01AA - tRCD/tRP
- RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used
- if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
-**/
- UINT8 tRCDtRP;
-
-/** Offset 0x01AB
-**/
- UINT8 UnusedUpdSpace5;
-
-/** Offset 0x01AC - tREFI
- Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT16 tREFI;
-
-/** Offset 0x01AE - tRFC
- Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT16 tRFC;
-
-/** Offset 0x01B0 - tRRD
- Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT8 tRRD;
-
-/** Offset 0x01B1 - tRTP
- Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
- values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT8 tRTP;
-
-/** Offset 0x01B2 - tWR
- Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
- 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
- 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
- 34:34, 40:40
-**/
- UINT8 tWR;
-
-/** Offset 0x01B3 - tWTR
- Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected
- == 1 (Custom Profile).
-**/
- UINT8 tWTR;
-
-/** Offset 0x01B4 - NMode
- System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
-**/
- UINT8 NModeSupport;
-
-/** Offset 0x01B5 - Enable Intel HD Audio (Azalia)
- 0: Disable, 1: Enable (Default) Azalia controller
- $EN_DIS
-**/
- UINT8 PchHdaEnable;
-
-/** Offset 0x01B6 - Enable PCH ISH Controller
- 0: Disable, 1: Enable (Default) ISH Controller
- $EN_DIS
-**/
- UINT8 PchIshEnable;
-
-/** Offset 0x01B7 - CPU Trace Hub Mode
- Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
- if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
- 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode
-**/
- UINT8 CpuTraceHubMode;
-
-/** Offset 0x01B8 - CPU Trace Hub Memory Region 0
- CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
- 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
- 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
-**/
- UINT8 CpuTraceHubMemReg0Size;
-
-/** Offset 0x01B9 - CPU Trace Hub Memory Region 1
- CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
- 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
- 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
-**/
- UINT8 CpuTraceHubMemReg1Size;
-
-/** Offset 0x01BA - SAGV Gear Ratio
- Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2
-**/
- UINT8 SaGvGear[4];
-
-/** Offset 0x01BE - SAGV Frequency
- SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300.
-**/
- UINT16 SaGvFreq[4];
-
-/** Offset 0x01C6 - SAGV Disabled Gear Ratio
- Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2
-**/
- UINT8 GearRatio;
-
-/** Offset 0x01C7 - HECI Timeouts
- 0: Disable, 1: Enable (Default) timeout check for HECI
- $EN_DIS
-**/
- UINT8 HeciTimeouts;
-
-/** Offset 0x01C8 - HECI1 BAR address
- BAR address of HECI1
-**/
- UINT32 Heci1BarAddress;
-
-/** Offset 0x01CC - HECI2 BAR address
- BAR address of HECI2
-**/
- UINT32 Heci2BarAddress;
-
-/** Offset 0x01D0 - HECI3 BAR address
- BAR address of HECI3
-**/
- UINT32 Heci3BarAddress;
-
-/** Offset 0x01D4 - HG dGPU Power Delay
- HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
- 300=300 microseconds
-**/
- UINT16 HgDelayAfterPwrEn;
-
-/** Offset 0x01D6 - HG dGPU Reset Delay
- HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
- microseconds
-**/
- UINT16 HgDelayAfterHoldReset;
-
-/** Offset 0x01D8 - MMIO size adjustment for AUTO mode
- Positive number means increasing MMIO size, Negative value means decreasing MMIO
- size: 0 (Default)=no change to AUTO mode MMIO size
-**/
- UINT16 MmioSizeAdjustment;
-
-/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom
- Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
- Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
- Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
- 0:Before, 1:After
-**/
- UINT8 InitPcieAspmAfterOprom;
-
-/** Offset 0x01DB - Selection of the primary display device
- 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
- 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
-**/
- UINT8 PrimaryDisplay;
-
-/** Offset 0x01DC - Selection of PSMI Region size
- 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
- 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
-**/
- UINT8 PsmiRegionSize;
-
-/** Offset 0x01DD
-**/
- UINT8 UnusedUpdSpace6[3];
-
-/** Offset 0x01E0 - Temporary MMIO address for GMADR
- Obsolete field now and it has been extended to 64 bit address, used GmAdr64
-**/
- UINT32 GmAdr;
-
-/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR
- The reference code will use this as Temporary MMIO address space to access GTTMMADR
- Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
- to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
- + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
-**/
- UINT32 GttMmAdr;
-
-/** Offset 0x01E8 - Selection of iGFX GTT Memory size
- 1=2MB, 2=4MB, 3=8MB, Default is 3
- 1:2MB, 2:4MB, 3:8MB
-**/
- UINT16 GttSize;
-
-/** Offset 0x01EA
-**/
- UINT8 UnusedUpdSpace7[2];
-
-/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0
- Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs
-**/
- UINT32 CpuPcie0Rtd3Gpio[24];
-
-/** Offset 0x024C - Enable/Disable MRC TXT dependency
- When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
- MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
- $EN_DIS
-**/
- UINT8 TxtImplemented;
-
-/** Offset 0x024D - Enable/Disable SA OcSupport
- Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
- $EN_DIS
-**/
- UINT8 SaOcSupport;
-
-/** Offset 0x024E - GT slice Voltage Mode
- 0(Default): Adaptive, 1: Override
- 0: Adaptive, 1: Override
-**/
- UINT8 GtVoltageMode;
-
-/** Offset 0x024F - Maximum GTs turbo ratio override
- 0(Default)=Minimal/Auto, 60=Maximum
-**/
- UINT8 GtMaxOcRatio;
-
-/** Offset 0x0250 - The voltage offset applied to GT slice
- 0(Default)=Minimal, 1000=Maximum
-**/
- UINT16 GtVoltageOffset;
-
-/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies
- 0(Default)=Minimal, 2000=Maximum
-**/
- UINT16 GtVoltageOverride;
-
-/** Offset 0x0254 - adaptive voltage applied during turbo frequencies
- 0(Default)=Minimal, 2000=Maximum
-**/
- UINT16 GtExtraTurboVoltage;
-
-/** Offset 0x0256 - voltage offset applied to the SA
- 0(Default)=Minimal, 1000=Maximum
-**/
- UINT16 SaVoltageOffset;
-
-/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU
- Root port Index number to indicate which PCIe root port has dGPU
-**/
- UINT8 RootPortIndex;
-
-/** Offset 0x0259 - Realtime Memory Timing
- 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
- realtime memory timing changes after MRC_DONE.
- 0: Disabled, 1: Enabled
-**/
- UINT8 RealtimeMemoryTiming;
-
-/** Offset 0x025A - iTBT PCIe Multiple Segment setting
- When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the
- TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 PcieMultipleSegmentEnabled;
-
-/** Offset 0x025B - Enable/Disable SA IPU
- Enable(Default): Enable SA IPU, Disable: Disable SA IPU
- $EN_DIS
-**/
- UINT8 SaIpuEnable;
-
-/** Offset 0x025C - IPU IMR Configuration
- 0:IPU Camera, 1:IPU Gen Default is 0
- 0:IPU Camera, 1:IPU Gen
-**/
- UINT8 SaIpuImrConfiguration;
-
-/** Offset 0x025D - IMGU CLKOUT Configuration
- The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 ImguClkOutEn[6];
-
-/** Offset 0x0263
-**/
- UINT8 UnusedUpdSpace8;
-
-/** Offset 0x0264 - Enable PCIE RP Mask
- Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
- for port1, bit1 for port2, and so on.
-**/
- UINT32 CpuPcieRpEnableMask;
-
-/** Offset 0x0268 - Assertion on Link Down GPIOs
- GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down
- GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs
- 0:Disable, 1:Enable
-**/
- UINT8 CpuPcieRpLinkDownGpios;
-
-/** Offset 0x0269 - RpClockReqMsgEnable
-**/
- UINT8 RpClockReqMsgEnable;
-
-/** Offset 0x026A - RpPcieThresholdBytes
-**/
- UINT8 RpPcieThresholdBytes[4];
-
-/** Offset 0x026E - Selection of PSMI Support On/Off
- 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
- $EN_DIS
-**/
- UINT8 GtPsmiSupport;
-
-/** Offset 0x026F - Selection of DiSM Region Size
- DiSM Size to be allocated for 2LM Sku Default is 0
- 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB
-**/
- UINT8 DismSize;
-
-/** Offset 0x0270 - Enable Display memory map programming for DFD Restore
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DfdRestoreEnable;
-
-/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device
- 0=Disabled,1(Default)=eDP, 2=MIPI DSI
- 0:Disabled, 1:eDP, 2:MIPI DSI
-**/
- UINT8 DdiPortAConfig;
-
-/** Offset 0x0272 - Program GPIOs for LFP on DDI port-B device
- 0(Default)=Disabled,1=eDP, 2=MIPI DSI
- 0:Disabled, 1:eDP, 2:MIPI DSI
-**/
- UINT8 DdiPortBConfig;
-
-/** Offset 0x0273 - Enable or disable HPD of DDI port A
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPortAHpd;
-
-/** Offset 0x0274 - Enable or disable HPD of DDI port B
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortBHpd;
-
-/** Offset 0x0275 - Enable or disable HPD of DDI port C
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPortCHpd;
-
-/** Offset 0x0276 - Enable or disable HPD of DDI port 1
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPort1Hpd;
-
-/** Offset 0x0277 - Enable or disable HPD of DDI port 2
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort2Hpd;
-
-/** Offset 0x0278 - Enable or disable HPD of DDI port 3
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort3Hpd;
-
-/** Offset 0x0279 - Enable or disable HPD of DDI port 4
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort4Hpd;
-
-/** Offset 0x027A - Enable or disable DDC of DDI port A
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPortADdc;
-
-/** Offset 0x027B - Enable or disable DDC of DDI port B
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortBDdc;
-
-/** Offset 0x027C - Enable or disable DDC of DDI port C
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPortCDdc;
-
-/** Offset 0x027D - Enable DDC setting of DDI Port 1
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort1Ddc;
-
-/** Offset 0x027E - Enable DDC setting of DDI Port 2
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort2Ddc;
-
-/** Offset 0x027F - Enable DDC setting of DDI Port 3
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort3Ddc;
-
-/** Offset 0x0280 - Enable DDC setting of DDI Port 4
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPort4Ddc;
-
-/** Offset 0x0281 - Enable Gt CLOS
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 GtClosEnable;
-
-/** Offset 0x0282
-**/
- UINT8 UnusedUpdSpace9[6];
-
-/** Offset 0x0288 - Temporary MMIO address for GMADR
- The reference code will use this as Temporary MMIO address space to access GMADR
- Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to
- (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress
- - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB)
-**/
- UINT64 GmAdr64;
-
-/** Offset 0x0290 - Hybrid Graphics Slot Selection
- PEG or PCH Slot Selection for Hybrid Graphics
-**/
- UINT8 HgSlot;
-
-/** Offset 0x0291 - DMI ASPM Configuration:{Combo
- Set ASPM Configuration
- 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
-**/
- UINT8 DmiAspm;
-
-/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo
- Set ASPM Control configuration
- 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
-**/
- UINT8 DmiAspmCtrl;
-
-/** Offset 0x0293 - DMI ASPM L1 exit Latency
- Range: 0-7, 4 is default L1 exit Latency
-**/
- UINT8 DmiAspmL1ExitLatency;
-
-/** Offset 0x0294 - Per-core HT Disable
- Defines the per-core HT disable mask where: 1 - Disable selected logical core HT,
- 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value
- of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have
- HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1.
-**/
- UINT16 PerCoreHtDisable;
-
-/** Offset 0x0296 - DEKEL CDR Relock
- Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable
-**/
- UINT8 CpuPcieRpCdrRelock[4];
-
-/** Offset 0x029A - Realtime Memory OverClock
- Disable/Enables Realtime Memory OverClock
- $EN_DIS
-**/
- UINT8 RealtimeMemoryOC;
-
-/** Offset 0x029B - Xl1el
- Enable/Disable NewFom for DEKEL Programming. 0: Disable(Default); 1: Enable
-**/
- UINT8 CpuPcieNewFom[4];
-
-/** Offset 0x029F - Xl1el
- Enable/Disable NewFomDisable. 0: Disable(Default); 1: Enable
-**/
- UINT8 CpuPcieIotgMode[4];
-
-/** Offset 0x02A3 - SaPreMemProductionRsvd
- Reserved for SA Pre-Mem Production
- $EN_DIS
-**/
- UINT8 SaPreMemProductionRsvd[87];
-
-/** Offset 0x02FA - DMI Max Link Speed
- Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2):
- Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed
- 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
-**/
- UINT8 DmiMaxLinkSpeed;
-
-/** Offset 0x02FB - DMI Equalization Phase 2
- DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
- AUTO - Use the current default method
- 0:Disable phase2, 1:Enable phase2, 2:Auto
-**/
- UINT8 DmiGen3EqPh2Enable;
-
-/** Offset 0x02FC - DMI Gen3 Equalization Phase3
- DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
- HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
- Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
- EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
- Phase1), Disabled(0x4): Bypass Equalization Phase 3
- 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
-**/
- UINT8 DmiGen3EqPh3Method;
-
-/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming
- Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
- Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
- $EN_DIS
-**/
- UINT8 DmiGen3ProgramStaticEq;
-
-/** Offset 0x02FE - DeEmphasis control for DMI
- DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
- 0: -6dB, 1: -3.5dB
-**/
- UINT8 DmiDeEmphasis;
-
-/** Offset 0x02FF - DMI Gen3 Root port preset values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
-**/
- UINT8 DmiGen3RootPortPreset[8];
-
-/** Offset 0x0307 - DMI Gen3 End port preset values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
-**/
- UINT8 DmiGen3EndPointPreset[8];
-
-/** Offset 0x030F - DMI Gen3 End port Hint values per lane
- Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
-**/
- UINT8 DmiGen3EndPointHint[8];
-
-/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control
- Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
-**/
- UINT8 DmiGen3RxCtlePeaking[4];
-
-/** Offset 0x031B - BIST on Reset
- Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 BistOnReset;
-
-/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable
- Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 SkipStopPbet;
-
-/** Offset 0x031D - C6DRAM power gating feature
- This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
- power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating
- feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>.
- $EN_DIS
-**/
- UINT8 EnableC6Dram;
-
-/** Offset 0x031E - Over clocking support
- Over clocking support; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 OcSupport;
-
-/** Offset 0x031F - Over clocking Lock
- Over clocking Lock Enable/Disable; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 OcLock;
-
-/** Offset 0x0320 - Maximum Core Turbo Ratio Override
- Maximum core turbo ratio override allows to increase CPU core frequency beyond the
- fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
-**/
- UINT8 CoreMaxOcRatio;
-
-/** Offset 0x0321 - Core voltage mode
- Core voltage mode; <b>0: Adaptive</b>; 1: Override.
- $EN_DIS
-**/
- UINT8 CoreVoltageMode;
-
-/** Offset 0x0322 - Maximum clr turbo ratio override
- Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
- fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
-**/
- UINT8 RingMaxOcRatio;
-
-/** Offset 0x0323 - Hyper Threading Enable/Disable
- Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 HyperThreading;
-
-/** Offset 0x0324 - Enable or Disable CPU Ratio Override
- Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 CpuRatioOverride;
-
-/** Offset 0x0325 - CPU ratio value
- CPU ratio value. Valid Range 0 to 63
-**/
- UINT8 CpuRatio;
-
-/** Offset 0x0326 - Boot frequency
- Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.
- 1: Maximum non-turbo performance. <b>2: Turbo performance </b>
- 0:0, 1:1, 2:2
-**/
- UINT8 BootFrequency;
-
-/** Offset 0x0327 - Number of active cores
- Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2:
- 2 </b>;<b>3: 3 </b>
- 0:All, 1:1, 2:2, 3:3
-**/
- UINT8 ActiveCoreCount;
-
-/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting
- <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
- 2: 400 MHz. - 3: Reserved
- 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
-**/
- UINT8 FClkFrequency;
-
-/** Offset 0x0329 - Set JTAG power in C10 and deeper power states
- False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
- and deeper power states for debug purpose. <b>0: False</b>; 1: True.
- 0: False, 1: True
-**/
- UINT8 JtagC10PowerGateDisable;
-
-/** Offset 0x032A - Enable or Disable VMX
- Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 VmxEnable;
-
-/** Offset 0x032B - AVX2 Ratio Offset
- 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
- vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
-**/
- UINT8 Avx2RatioOffset;
-
-/** Offset 0x032C - AVX3 Ratio Offset
- 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
- vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
-**/
- UINT8 Avx3RatioOffset;
-
-/** Offset 0x032D - BCLK Adaptive Voltage Enable
- When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
- Disable;<b> 1: Enable
- $EN_DIS
-**/
- UINT8 BclkAdaptiveVoltage;
-
-/** Offset 0x032E - core voltage override
- The core voltage override which is applied to the entire range of cpu core frequencies.
- Valid Range 0 to 2000
-**/
- UINT16 CoreVoltageOverride;
-
-/** Offset 0x0330 - Core Turbo voltage Adaptive
- Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
- Valid Range 0 to 2000
-**/
- UINT16 CoreVoltageAdaptive;
-
-/** Offset 0x0332 - Core Turbo voltage Offset
- The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
-**/
- UINT16 CoreVoltageOffset;
-
-/** Offset 0x0334 - Core PLL voltage offset
- Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
-**/
- UINT8 CorePllVoltageOffset;
-
-/** Offset 0x0335 - Ring Downbin
- Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
- lower than the core ratio.0: Disable; <b>1: Enable.</b>
- $EN_DIS
-**/
- UINT8 RingDownBin;
-
-/** Offset 0x0336 - Ring voltage mode
- Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
- $EN_DIS
-**/
- UINT8 RingVoltageMode;
-
-/** Offset 0x0337 - TjMax Offset
- TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
- TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
-**/
- UINT8 TjMaxOffset;
-
-/** Offset 0x0338 - Ring voltage override
- The ring voltage override which is applied to the entire range of cpu ring frequencies.
- Valid Range 0 to 2000
-**/
- UINT16 RingVoltageOverride;
-
-/** Offset 0x033A - Ring Turbo voltage Adaptive
- Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
- Valid Range 0 to 2000
-**/
- UINT16 RingVoltageAdaptive;
-
-/** Offset 0x033C - Ring Turbo voltage Offset
- The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
-**/
- UINT16 RingVoltageOffset;
-
-/** Offset 0x033E - Enable or Disable TME
- Enable or Disable TME; <b>0: Disable<b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 TmeEnable;
-
-/** Offset 0x033F - Enable CPU CrashLog
- Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 CpuCrashLogEnable;
-
-/** Offset 0x0340 - ElixirSpringsPatchAddr
- DEPRECATED
-**/
- UINT32 ElixirSpringsPatchAddr;
-
-/** Offset 0x0344 - ElixirSpringsPatchSize
- DEPRECATED
-**/
- UINT32 ElixirSpringsPatchSize;
-
-/** Offset 0x0348 - CPU Run Control
- Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
- No Change</b>
- 0:Disabled, 1:Enabled, 2:No Change
-**/
- UINT8 DebugInterfaceEnable;
-
-/** Offset 0x0349 - CPU Run Control Lock
- Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 DebugInterfaceLockEnable;
-
-/** Offset 0x034A - BiosGuard
- Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
- $EN_DIS
-**/
- UINT8 BiosGuard;
-
-/** Offset 0x034B
-**/
- UINT8 BiosGuardToolsInterface;
-
-/** Offset 0x034C - EnableSgx
- Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control
- 0: Disable, 1: Enable, 2: Software Control
-**/
- UINT8 EnableSgx;
-
-/** Offset 0x034D - Txt
- Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
- $EN_DIS
-**/
- UINT8 Txt;
-
-/** Offset 0x034E
-**/
- UINT8 UnusedUpdSpace10[2];
-
-/** Offset 0x0350 - PrmrrSize
- Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
-**/
- UINT32 PrmrrSize;
-
-/** Offset 0x0354 - SinitMemorySize
- Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
-**/
- UINT32 SinitMemorySize;
-
-/** Offset 0x0358 - TxtDprMemoryBase
- Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
-**/
- UINT64 TxtDprMemoryBase;
-
-/** Offset 0x0360 - TxtHeapMemorySize
- Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
-**/
- UINT32 TxtHeapMemorySize;
-
-/** Offset 0x0364 - TxtDprMemorySize
- Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable
-**/
- UINT32 TxtDprMemorySize;
-
-/** Offset 0x0368 - BiosAcmBase
- Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
-**/
- UINT32 BiosAcmBase;
-
-/** Offset 0x036C - BiosAcmSize
- Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
-**/
- UINT32 BiosAcmSize;
-
-/** Offset 0x0370 - ApStartupBase
- Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
-**/
- UINT32 ApStartupBase;
-
-/** Offset 0x0374 - TgaSize
- Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
-**/
- UINT32 TgaSize;
-
-/** Offset 0x0378 - TxtLcpPdBase
- Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
-**/
- UINT64 TxtLcpPdBase;
-
-/** Offset 0x0380 - TxtLcpPdSize
- Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
-**/
- UINT64 TxtLcpPdSize;
-
-/** Offset 0x0388 - IsTPMPresence
- IsTPMPresence default values
-**/
- UINT8 IsTPMPresence;
-
-/** Offset 0x0389 - Configuration for boot TDP selection
- Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
- Up;0xFF : Deactivate
-**/
- UINT8 ConfigTdpLevel;
-
-/** Offset 0x038A - ReservedSecurityPreMem
- Reserved for Security Pre-Mem
- $EN_DIS
-**/
- UINT8 ReservedSecurityPreMem[5];
-
-/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle
- Enable PCH PCIe Gen 3 Set CTLE Value.
-**/
- UINT8 PchPcieHsioRxSetCtleEnable[24];
-
-/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value
- PCH PCIe Gen 3 Set CTLE Value.
-**/
- UINT8 PchPcieHsioRxSetCtle[24];
-
-/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24];
-
-/** Offset 0x03D7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
- PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchPcieHsioTxGen1DownscaleAmp[24];
-
-/** Offset 0x03EF - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24];
-
-/** Offset 0x0407 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
- PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchPcieHsioTxGen2DownscaleAmp[24];
-
-/** Offset 0x041F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24];
-
-/** Offset 0x0437 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
- PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchPcieHsioTxGen3DownscaleAmp[24];
-
-/** Offset 0x044F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen1DeEmphEnable[24];
-
-/** Offset 0x0467 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
- PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
-**/
- UINT8 PchPcieHsioTxGen1DeEmph[24];
-
-/** Offset 0x047F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24];
-
-/** Offset 0x0497 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
- PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
-**/
- UINT8 PchPcieHsioTxGen2DeEmph3p5[24];
-
-/** Offset 0x04AF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24];
-
-/** Offset 0x04C7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
- PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
-**/
- UINT8 PchPcieHsioTxGen2DeEmph6p0[24];
-
-/** Offset 0x04DF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
-
-/** Offset 0x04E7 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
- PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
-**/
- UINT8 PchSataHsioRxGen1EqBoostMag[8];
-
-/** Offset 0x04EF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
-
-/** Offset 0x04F7 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
- PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
-**/
- UINT8 PchSataHsioRxGen2EqBoostMag[8];
-
-/** Offset 0x04FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
-
-/** Offset 0x0507 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
- PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
-**/
- UINT8 PchSataHsioRxGen3EqBoostMag[8];
-
-/** Offset 0x050F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
-
-/** Offset 0x0517 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
- PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchSataHsioTxGen1DownscaleAmp[8];
-
-/** Offset 0x051F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
-
-/** Offset 0x0527 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
- PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchSataHsioTxGen2DownscaleAmp[8];
-
-/** Offset 0x052F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
-
-/** Offset 0x0537 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
- PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
-**/
- UINT8 PchSataHsioTxGen3DownscaleAmp[8];
-
-/** Offset 0x053F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen1DeEmphEnable[8];
-
-/** Offset 0x0547 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
- PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
-**/
- UINT8 PchSataHsioTxGen1DeEmph[8];
-
-/** Offset 0x054F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen2DeEmphEnable[8];
-
-/** Offset 0x0557 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
- PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
-**/
- UINT8 PchSataHsioTxGen2DeEmph[8];
-
-/** Offset 0x055F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
- 0: Disable; 1: Enable.
-**/
- UINT8 PchSataHsioTxGen3DeEmphEnable[8];
-
-/** Offset 0x0567 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
- PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
-**/
- UINT8 PchSataHsioTxGen3DeEmph[8];
-
-/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding
- Original LPC only decodes one byte of port 80h.
- $EN_DIS
-**/
- UINT8 PchLpcEnhancePort8xhDecoding;
-
-/** Offset 0x0570 - PCH Port80 Route
- Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
- 0:LPC, 1:PCI
-**/
- UINT8 PchPort80Route;
-
-/** Offset 0x0571 - Enable SMBus ARP support
- Enable SMBus ARP support.
- $EN_DIS
-**/
- UINT8 SmbusArpEnable;
-
-/** Offset 0x0572 - Number of RsvdSmbusAddressTable.
- The number of elements in the RsvdSmbusAddressTable.
-**/
- UINT8 PchNumRsvdSmbusAddresses;
-
-/** Offset 0x0573
-**/
- UINT8 UnusedUpdSpace11;
-
-/** Offset 0x0574 - SMBUS Base Address
- SMBUS Base Address (IO space).
-**/
- UINT16 PchSmbusIoBase;
-
-/** Offset 0x0576 - Enable SMBus Alert Pin
- Enable SMBus Alert Pin.
- $EN_DIS
-**/
- UINT8 PchSmbAlertEnable;
-
-/** Offset 0x0577 - Usage type for ClkSrc
- 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
- (free running), 0xFF: not used
-**/
- UINT8 PcieClkSrcUsage[16];
-
-/** Offset 0x0587 - ClkReq-to-ClkSrc mapping
- Number of ClkReq signal assigned to ClkSrc
-**/
- UINT8 PcieClkSrcClkReq[16];
-
-/** Offset 0x0597
-**/
- UINT8 UnusedUpdSpace12;
-
-/** Offset 0x0598 - Point of RsvdSmbusAddressTable
- Array of addresses reserved for non-ARP-capable SMBus devices.
-**/
- UINT32 RsvdSmbusAddressTablePtr;
-
-/** Offset 0x059C - Enable PCIE RP Mask
- Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
- for port1, bit1 for port2, and so on.
-**/
- UINT32 PcieRpEnableMask;
-
-/** Offset 0x05A0 - Debug Interfaces
- Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
- BIT2 - Not used.
-**/
- UINT8 PcdDebugInterfaceFlags;
-
-/** Offset 0x05A1 - Serial Io Uart Debug Controller Number
- Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
- Core interface, it cannot be used for debug purpose.
- 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
-**/
- UINT8 SerialIoUartDebugControllerNumber;
-
-/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow
- Enables UART hardware flow control, CTS and RTS lines.
- $EN_DIS
-**/
- UINT8 SerialIoUartDebugAutoFlow;
-
-/** Offset 0x05A3
-**/
- UINT8 UnusedUpdSpace13;
-
-/** Offset 0x05A4 - Serial Io Uart Debug BaudRate
- Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
- 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
-**/
- UINT32 SerialIoUartDebugBaudRate;
-
-/** Offset 0x05A8 - Serial Io Uart Debug Parity
- Set default Parity.
- 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
-**/
- UINT8 SerialIoUartDebugParity;
-
-/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits
- Set default stop bits.
- 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
-**/
- UINT8 SerialIoUartDebugStopBits;
-
-/** Offset 0x05AA - Serial Io Uart Debug Data Bits
- Set default word length. 0: Default, 5,6,7,8
- 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
-**/
- UINT8 SerialIoUartDebugDataBits;
-
-/** Offset 0x05AB
-**/
- UINT8 UnusedUpdSpace14;
-
-/** Offset 0x05AC - Serial Io Uart Debug Mmio Base
- Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
- = SerialIoUartPci.
-**/
- UINT32 SerialIoUartDebugMmioBase;
-
-/** Offset 0x05B0 - ISA Serial Base selection
- Select ISA Serial Base address. Default is 0x3F8.
- 0:0x3F8, 1:0x2F8
-**/
- UINT8 PcdIsaSerialUartBase;
-
-/** Offset 0x05B1 - GT PLL voltage offset
- Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
-**/
- UINT8 GtPllVoltageOffset;
-
-/** Offset 0x05B2 - Ring PLL voltage offset
- Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
-**/
- UINT8 RingPllVoltageOffset;
-
-/** Offset 0x05B3 - System Agent PLL voltage offset
- Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
-**/
- UINT8 SaPllVoltageOffset;
-
-/** Offset 0x05B4 - Memory Controller PLL voltage offset
- Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
-**/
- UINT8 McPllVoltageOffset;
-
-/** Offset 0x05B5 - MRC Safe Config
- Enables/Disable MRC Safe Config
- $EN_DIS
-**/
- UINT8 MrcSafeConfig;
-
-/** Offset 0x05B6 - TCSS Thunderbolt PCIE Root Port 0 Enable
- Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssItbtPcie0En;
-
-/** Offset 0x05B7 - TCSS Thunderbolt PCIE Root Port 1 Enable
- Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssItbtPcie1En;
-
-/** Offset 0x05B8 - TCSS Thunderbolt PCIE Root Port 2 Enable
- Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssItbtPcie2En;
-
-/** Offset 0x05B9 - TCSS Thunderbolt PCIE Root Port 3 Enable
- Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssItbtPcie3En;
-
-/** Offset 0x05BA - TCSS USB HOST (xHCI) Enable
- Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below
- $EN_DIS
-**/
- UINT8 TcssXhciEn;
-
-/** Offset 0x05BB - TCSS USB DEVICE (xDCI) Enable
- Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled
- $EN_DIS
-**/
- UINT8 TcssXdciEn;
-
-/** Offset 0x05BC - TCSS DMA0 Enable
- Set TCSS DMA0. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssDma0En;
-
-/** Offset 0x05BD - TCSS DMA1 Enable
- Set TCSS DMA1. 0:Disabled 1:Enabled
- $EN_DIS
-**/
- UINT8 TcssDma1En;
-
-/** Offset 0x05BE - PcdSerialDebugBaudRate
- Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
- 3:9600, 4:19200, 6:56700, 7:115200
-**/
- UINT8 PcdSerialDebugBaudRate;
-
-/** Offset 0x05BF - HobBufferSize
- Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
- total HOB size).
- 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
-**/
- UINT8 HobBufferSize;
-
-/** Offset 0x05C0 - Early Command Training
- Enables/Disable Early Command Training
- $EN_DIS
-**/
- UINT8 ECT;
-
-/** Offset 0x05C1 - SenseAmp Offset Training
- Enables/Disable SenseAmp Offset Training
- $EN_DIS
-**/
- UINT8 SOT;
-
-/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D
- Enables/Disable Early ReadMPR Timing Centering 2D
- $EN_DIS
-**/
- UINT8 ERDMPRTC2D;
-
-/** Offset 0x05C3 - Read MPR Training
- Enables/Disable Read MPR Training
- $EN_DIS
-**/
- UINT8 RDMPRT;
-
-/** Offset 0x05C4 - Receive Enable Training
- Enables/Disable Receive Enable Training
- $EN_DIS
-**/
- UINT8 RCVET;
-
-/** Offset 0x05C5 - Jedec Write Leveling
- Enables/Disable Jedec Write Leveling
- $EN_DIS
-**/
- UINT8 JWRL;
-
-/** Offset 0x05C6 - Early Write Time Centering 2D
- Enables/Disable Early Write Time Centering 2D
- $EN_DIS
-**/
- UINT8 EWRTC2D;
-
-/** Offset 0x05C7 - Early Read Time Centering 2D
- Enables/Disable Early Read Time Centering 2D
- $EN_DIS
-**/
- UINT8 ERDTC2D;
-
-/** Offset 0x05C8 - Write Timing Centering 1D
- Enables/Disable Write Timing Centering 1D
- $EN_DIS
-**/
- UINT8 WRTC1D;
-
-/** Offset 0x05C9 - Write Voltage Centering 1D
- Enables/Disable Write Voltage Centering 1D
- $EN_DIS
-**/
- UINT8 WRVC1D;
-
-/** Offset 0x05CA - Read Timing Centering 1D
- Enables/Disable Read Timing Centering 1D
- $EN_DIS
-**/
- UINT8 RDTC1D;
-
-/** Offset 0x05CB - Dimm ODT Training
- Enables/Disable Dimm ODT Training
- $EN_DIS
-**/
- UINT8 DIMMODTT;
-
-/** Offset 0x05CC - DIMM RON Training
- Enables/Disable DIMM RON Training
- $EN_DIS
-**/
- UINT8 DIMMRONT;
-
-/** Offset 0x05CD - Write Drive Strength/Equalization 2D
- Enables/Disable Write Drive Strength/Equalization 2D
- $EN_DIS
-**/
- UINT8 WRDSEQT;
-
-/** Offset 0x05CE - Write Slew Rate Training
- Enables/Disable Write Slew Rate Training
- $EN_DIS
-**/
- UINT8 WRSRT;
-
-/** Offset 0x05CF - Read ODT Training
- Enables/Disable Read ODT Training
- $EN_DIS
-**/
- UINT8 RDODTT;
-
-/** Offset 0x05D0 - Read Equalization Training
- Enables/Disable Read Equalization Training
- $EN_DIS
-**/
- UINT8 RDEQT;
-
-/** Offset 0x05D1 - Read Amplifier Training
- Enables/Disable Read Amplifier Training
- $EN_DIS
-**/
- UINT8 RDAPT;
-
-/** Offset 0x05D2 - Write Timing Centering 2D
- Enables/Disable Write Timing Centering 2D
- $EN_DIS
-**/
- UINT8 WRTC2D;
-
-/** Offset 0x05D3 - Read Timing Centering 2D
- Enables/Disable Read Timing Centering 2D
- $EN_DIS
-**/
- UINT8 RDTC2D;
-
-/** Offset 0x05D4 - Write Voltage Centering 2D
- Enables/Disable Write Voltage Centering 2D
- $EN_DIS
-**/
- UINT8 WRVC2D;
-
-/** Offset 0x05D5 - Read Voltage Centering 2D
- Enables/Disable Read Voltage Centering 2D
- $EN_DIS
-**/
- UINT8 RDVC2D;
-
-/** Offset 0x05D6 - Command Voltage Centering
- Enables/Disable Command Voltage Centering
- $EN_DIS
-**/
- UINT8 CMDVC;
-
-/** Offset 0x05D7 - Late Command Training
- Enables/Disable Late Command Training
- $EN_DIS
-**/
- UINT8 LCT;
-
-/** Offset 0x05D8 - Round Trip Latency Training
- Enables/Disable Round Trip Latency Training
- $EN_DIS
-**/
- UINT8 RTL;
-
-/** Offset 0x05D9 - Turn Around Timing Training
- Enables/Disable Turn Around Timing Training
- $EN_DIS
-**/
- UINT8 TAT;
-
-/** Offset 0x05DA - Memory Test
- Enables/Disable Memory Test
- $EN_DIS
-**/
- UINT8 MEMTST;
-
-/** Offset 0x05DB - DIMM SPD Alias Test
- Enables/Disable DIMM SPD Alias Test
- $EN_DIS
-**/
- UINT8 ALIASCHK;
-
-/** Offset 0x05DC - Receive Enable Centering 1D
- Enables/Disable Receive Enable Centering 1D
- $EN_DIS
-**/
- UINT8 RCVENC1D;
-
-/** Offset 0x05DD - Retrain Margin Check
- Enables/Disable Retrain Margin Check
- $EN_DIS
-**/
- UINT8 RMC;
-
-/** Offset 0x05DE - Write Drive Strength Up/Dn independently
- Enables/Disable Write Drive Strength Up/Dn independently
- $EN_DIS
-**/
- UINT8 WRDSUDT;
-
-/** Offset 0x05DF - ECC Support
- Enables/Disable ECC Support
- $EN_DIS
-**/
- UINT8 EccSupport;
-
-/** Offset 0x05E0 - Ibecc
- In-Band ECC Support
- $EN_DIS
-**/
- UINT8 Ibecc;
-
-/** Offset 0x05E1 - IbeccParity
- In-Band ECC Parity Control
- $EN_DIS
-**/
- UINT8 IbeccParity;
-
-/** Offset 0x05E2 - IbeccOperationMode
- In-Band ECC Operation Mode
- 0:Protect base on address range, 1: Non-protected, 2: All protected
-**/
- UINT8 IbeccOperationMode;
-
-/** Offset 0x05E3 - IbeccProtectedRegionEnable
- In-Band ECC Protected Region Enable
- $EN_DIS
-**/
- UINT8 IbeccProtectedRegionEnable[8];
-
-/** Offset 0x05EB
-**/
- UINT8 UnusedUpdSpace15[1];
-
-/** Offset 0x05EC - IbeccProtectedRegionBases
- IBECC Protected Region Bases
-**/
- UINT16 IbeccProtectedRegionBase[8];
-
-/** Offset 0x05FC - IbeccProtectedRegionMasks
- IBECC Protected Region Masks
-**/
- UINT16 IbeccProtectedRegionMask[8];
-
-/** Offset 0x060C - Memory Remap
- Enables/Disable Memory Remap
- $EN_DIS
-**/
- UINT8 RemapEnable;
-
-/** Offset 0x060D - Rank Interleave support
- Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
- the same time.
- $EN_DIS
-**/
- UINT8 RankInterleave;
-
-/** Offset 0x060E - Enhanced Interleave support
- Enables/Disable Enhanced Interleave support
- $EN_DIS
-**/
- UINT8 EnhancedInterleave;
-
-/** Offset 0x060F - Ch Hash Support
- Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
- $EN_DIS
-**/
- UINT8 ChHashEnable;
-
-/** Offset 0x0610 - Extern Therm Status
- Enables/Disable Extern Therm Status
- $EN_DIS
-**/
- UINT8 EnableExtts;
-
-/** Offset 0x0611 - DDR PowerDown and idle counter
- Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
- $EN_DIS
-**/
- UINT8 EnablePwrDn;
-
-/** Offset 0x0612 - DDR PowerDown and idle counter
- Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
- $EN_DIS
-**/
- UINT8 EnablePwrDnLpddr;
-
-/** Offset 0x0613 - SelfRefresh Enable
- Enables/Disable SelfRefresh Enable
- $EN_DIS
-**/
- UINT8 SrefCfgEna;
-
-/** Offset 0x0614 - Throttler CKEMin Defeature
- Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
- $EN_DIS
-**/
- UINT8 ThrtCkeMinDefeatLpddr;
-
-/** Offset 0x0615 - Throttler CKEMin Defeature
- Enables/Disable Throttler CKEMin Defeature
- $EN_DIS
-**/
- UINT8 ThrtCkeMinDefeat;
-
-/** Offset 0x0616 - Enable RH Prevention
- Enables/Disable RH Prevention
- $EN_DIS
-**/
- UINT8 RhPrevention;
-
-/** Offset 0x0617 - Exit On Failure (MRC)
- Enables/Disable Exit On Failure (MRC)
- $EN_DIS
-**/
- UINT8 ExitOnFailure;
-
-/** Offset 0x0618 - New Features 1 - MRC
- New Feature Enabling 1, <b>0:Disable</b>, 1:Enable
- 0:Disable, 1:Enable
-**/
- UINT8 NewFeatureEnable1;
-
-/** Offset 0x0619 - New Features 2 - MRC
- New Feature Enabling 2, <b>0:Disable</b>, 1:Enable
- 0:Disable, 1:Enable
-**/
- UINT8 NewFeatureEnable2;
-
-/** Offset 0x061A - Duty Cycle Correction Training
- Enable/Disable Duty Cycle Correction Training
- $EN_DIS
-**/
- UINT8 DCC;
-
-/** Offset 0x061B - Read Voltage Centering 1D
- Enable/Disable Read Voltage Centering 1D
- $EN_DIS
-**/
- UINT8 RDVC1D;
-
-/** Offset 0x061C - TxDqTCO Comp Training
- Enable/Disable TxDqTCO Comp Training
- $EN_DIS
-**/
- UINT8 TXTCO;
-
-/** Offset 0x061D - ClkTCO Comp Training
- Enable/Disable ClkTCO Comp Training
- $EN_DIS
-**/
- UINT8 CLKTCO;
-
-/** Offset 0x061E - CMD Slew Rate Training
- Enable/Disable CMD Slew Rate Training
- $EN_DIS
-**/
- UINT8 CMDSR;
-
-/** Offset 0x061F - CMD Drive Strength and Tx Equalization
- Enable/Disable CMD Drive Strength and Tx Equalization
- $EN_DIS
-**/
- UINT8 CMDDSEQ;
-
-/** Offset 0x0620 - DIMM CA ODT Training
- Enable/Disable DIMM CA ODT Training
- $EN_DIS
-**/
- UINT8 DIMMODTCA;
-
-/** Offset 0x0621 - TxDqsTCO Comp Training
- Enable/Disable TxDqsTCO Comp Training
- $EN_DIS
-**/
- UINT8 TXTCODQS;
-
-/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D
- Enable/Disable CMD/CTL Drive Strength Up/Dn 2D
- $EN_DIS
-**/
- UINT8 CMDDRUD;
-
-/** Offset 0x0623 - VccDLL Bypass Training
- Enable/Disable VccDLL Bypass Training
- $EN_DIS
-**/
- UINT8 VCCDLLBP;
-
-/** Offset 0x0624 - PanicVttDnLp Training
- Enable/Disable PanicVttDnLp Training
- $EN_DIS
-**/
- UINT8 PVTTDNLP;
-
-/** Offset 0x0625 - Read Vref Decap Training*
- Enable/Disable Read Vref Decap Training*
- $EN_DIS
-**/
- UINT8 RDVREFDC;
-
-/** Offset 0x0626 - Vddq Training
- Enable/Disable Vddq Training
- $EN_DIS
-**/
- UINT8 VDDQT;
-
-/** Offset 0x0627 - Rank Margin Tool Per Bit
- Enable/Disable Rank Margin Tool Per Bit
- $EN_DIS
-**/
- UINT8 RMTBIT;
-
-/** Offset 0x0628 - Override Performance Downgrade for Mixed Memory
- Disable/Enables Override Performance Downgrade for Mixed Memory
- $EN_DIS
-**/
- UINT8 OverrideDowngradeForMixedMemory;
-
-/** Offset 0x0629
-**/
- UINT8 Reserved2[1];
-
-/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
- Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
- $EN_DIS
-**/
- UINT8 Ddr4DdpSharedClock;
-
-/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
- ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
- $EN_DIS
-**/
- UINT8 Ddr4DdpSharedZq;
-
-/** Offset 0x062C - Ch Hash Interleaved Bit
- Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
- the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
- 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
-**/
- UINT8 ChHashInterleaveBit;
-
-/** Offset 0x062D
-**/
- UINT8 UnusedUpdSpace16;
-
-/** Offset 0x062E - Ch Hash Mask
- Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
- BITS [19:6] Default is 0x0830
-**/
- UINT16 ChHashMask;
-
-/** Offset 0x0630 - Base reference clock value
- Base reference clock value, in Hertz(Default is 100Hz)
- 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
-**/
- UINT32 BClkFrequency;
-
-/** Offset 0x0634 - EPG DIMM Idd3N
- Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
- a per DIMM basis. Default is 26
-**/
- UINT16 Idd3n;
-
-/** Offset 0x0636 - EPG DIMM Idd3P
- Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
- on a per DIMM basis. Default is 11
-**/
- UINT16 Idd3p;
-
-/** Offset 0x0638 - RH Activation Probability
- RH Activation Probability, Probability value is 1/2^(inputvalue)
-**/
- UINT8 RhActProbability;
-
-/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc0Ch0Dimm0;
-
-/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc0Ch0Dimm1;
-
-/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc0Ch1Dimm0;
-
-/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc0Ch1Dimm1;
-
-/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc1Ch0Dimm0;
-
-/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc1Ch0Dimm1;
-
-/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc1Ch1Dimm0;
-
-/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1
- Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
-**/
- UINT8 IdleEnergyMc1Ch1Dimm1;
-
-/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc0Ch0Dimm0;
-
-/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc0Ch0Dimm1;
-
-/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc0Ch1Dimm0;
-
-/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc0Ch1Dimm1;
-
-/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc1Ch0Dimm0;
-
-/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc1Ch0Dimm1;
-
-/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc1Ch1Dimm0;
-
-/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1
- PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
-**/
- UINT8 PdEnergyMc1Ch1Dimm1;
-
-/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc0Ch0Dimm0;
-
-/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc0Ch0Dimm1;
-
-/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc0Ch1Dimm0;
-
-/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc0Ch1Dimm1;
-
-/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc1Ch0Dimm0;
-
-/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc1Ch0Dimm1;
-
-/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc1Ch1Dimm0;
-
-/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1
- Activate Energy Contribution, range[255;0],(172= Def)
-**/
- UINT8 ActEnergyMc1Ch1Dimm1;
-
-/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc0Ch0Dimm0;
-
-/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc0Ch0Dimm1;
-
-/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc0Ch1Dimm0;
-
-/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc0Ch1Dimm1;
-
-/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc1Ch0Dimm0;
-
-/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc1Ch0Dimm1;
-
-/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc1Ch1Dimm0;
-
-/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1
- Read Energy Contribution, range[255;0],(212= Def)
-**/
- UINT8 RdEnergyMc1Ch1Dimm1;
-
-/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc0Ch0Dimm0;
-
-/** Offset 0x065A - Write Energy Mc0Ch0Dimm1
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc0Ch0Dimm1;
-
-/** Offset 0x065B - Write Energy Mc0Ch1Dimm0
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc0Ch1Dimm0;
-
-/** Offset 0x065C - Write Energy Mc0Ch1Dimm1
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc0Ch1Dimm1;
-
-/** Offset 0x065D - Write Energy Mc1Ch0Dimm0
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc1Ch0Dimm0;
-
-/** Offset 0x065E - Write Energy Mc1Ch0Dimm1
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc1Ch0Dimm1;
-
-/** Offset 0x065F - Write Energy Mc1Ch1Dimm0
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc1Ch1Dimm0;
-
-/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1
- Write Energy Contribution, range[255;0],(221= Def)
-**/
- UINT8 WrEnergyMc1Ch1Dimm1;
-
-/** Offset 0x0661 - Throttler CKEMin Timer
- Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
- Dfault is 0x00
-**/
- UINT8 ThrtCkeMinTmr;
-
-/** Offset 0x0662 - Rapl Power Floor Ch0
- Power budget ,range[255;0],(0= 5.3W Def)
-**/
- UINT8 RaplPwrFlCh0;
-
-/** Offset 0x0663 - Rapl Power Floor Ch1
- Power budget ,range[255;0],(0= 5.3W Def)
-**/
- UINT8 RaplPwrFlCh1;
-
-/** Offset 0x0664 - Command Rate Support
- CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
- 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS
-**/
- UINT8 EnCmdRate;
-
-/** Offset 0x0665 - REFRESH_2X_MODE
- 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
- 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
-**/
- UINT8 Refresh2X;
-
-/** Offset 0x0666 - Energy Performance Gain
- Enable/disable(default) Energy Performance Gain.
- $EN_DIS
-**/
- UINT8 EpgEnable;
-
-/** Offset 0x0667 - Row Hammer Solution
- Type of method used to prevent Row Hammer. Default is Hardware RHP
- 0:Hardware RHP, 1:2x Refresh
-**/
- UINT8 RhSolution;
-
-/** Offset 0x0668 - User Manual Threshold
- Disabled: Predefined threshold will be used.\n
- Enabled: User Input will be used.
- $EN_DIS
-**/
- UINT8 UserThresholdEnable;
-
-/** Offset 0x0669 - User Manual Budget
- Disabled: Configuration of memories will defined the Budget value.\n
- Enabled: User Input will be used.
- $EN_DIS
-**/
- UINT8 UserBudgetEnable;
-
-/** Offset 0x066A - Power Down Mode
- This option controls command bus tristating during idle periods
- 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto
-**/
- UINT8 PowerDownMode;
-
-/** Offset 0x066B - Pwr Down Idle Timer
- The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
- AUTO: 64 for ULX/ULT, 128 for DT/Halo
-**/
- UINT8 PwdwnIdleCounter;
-
-/** Offset 0x066C - Page Close Idle Timeout
- This option controls Page Close Idle Timeout
- 0:Enabled, 1:Disabled
-**/
- UINT8 DisPgCloseIdleTimeout;
-
-/** Offset 0x066D - Bitmask of ranks that have CA bus terminated
- Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
- Rank0 is terminating and Rank1 is non-terminating</b>
-**/
- UINT8 CmdRanksTerminated;
-
-/** Offset 0x066E - PcdSerialDebugLevel
- Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
- Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
- Info & Verbose.
- 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
- Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
-**/
- UINT8 PcdSerialDebugLevel;
-
-/** Offset 0x066F - Fivr Faults
- Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
- $EN_DIS
-**/
- UINT8 FivrFaults;
-
-/** Offset 0x0670 - Fivr Efficiency
- Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
- $EN_DIS
-**/
- UINT8 FivrEfficiency;
-
-/** Offset 0x0671 - Safe Mode Support
- This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
- $EN_DIS
-**/
- UINT8 SafeMode;
-
-/** Offset 0x0672 - Ask MRC to clear memory content
- Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
- $EN_DIS
-**/
- UINT8 CleanMemory;
-
-/** Offset 0x0673 - LpDdrDqDqsReTraining
- Enables/Disable LpDdrDqDqsReTraining
- $EN_DIS
-**/
- UINT8 LpDdrDqDqsReTraining;
-
-/** Offset 0x0674 - TCSS USB Port Enable
- Bitmap for per port enabling
-**/
- UINT8 UsbTcPortEnPreMem;
-
-/** Offset 0x0675
-**/
- UINT8 UnusedUpdSpace17;
-
-/** Offset 0x0676 - Post Code Output Port
- This option configures Post Code Output Port
-**/
- UINT16 PostCodeOutputPort;
-
-/** Offset 0x0678 - RMTLoopCount
- Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
-**/
- UINT8 RMTLoopCount;
-
-/** Offset 0x0679 - Enable/Disable SA CRID
- Enable: SA CRID, Disable (Default): SA CRID
- $EN_DIS
-**/
- UINT8 CridEnable;
-
-/** Offset 0x067A - WRC Feature
- Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports
- IO devices allocating onto the ring and into LLC. WRC is fused on by default.
- $EN_DIS
-**/
- UINT8 WrcFeatureEnable;
-
-/** Offset 0x067B
-**/
- UINT8 UnusedUpdSpace18[1];
-
-/** Offset 0x067C - BCLK RFI Frequency
- Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No
- RFI Tuning</b>. Range is 98Mhz-100Mhz.
-**/
- UINT32 BclkRfiFreq[4];
-
-/** Offset 0x068C - Size of PCIe IMR.
- Size of PCIe IMR in megabytes
-**/
- UINT16 PcieImrSize;
-
-/** Offset 0x068E - Enable PCIe IMR
- 0: Disable(AUTO), 1: Enable
- $EN_DIS
-**/
- UINT8 PcieImrEnabled;
-
-/** Offset 0x068F - Enable PCIe IMR
- 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select
- the Root port location from PCH PCIe or SA PCIe
- $EN_DIS
-**/
- UINT8 PcieImrRpLocation;
-
-/** Offset 0x0690 - Root port number for IMR.
- Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port
- from 0 to 23 and if it is SA PCIe then select root port from 0 to 3
-**/
- UINT8 PcieImrRpSelection;
-
-/** Offset 0x0691 - SerialDebugMrcLevel
- MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
- Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
- Info & Verbose.
- 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
- Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
-**/
- UINT8 SerialDebugMrcLevel;
-
-/** Offset 0x0692 - Mem Boot Mode
- 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
- 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
-**/
- UINT8 MemBootMode;
-
-/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom
- This option is specifically needed for ASPM configuration in 2LM feature
- 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto
-**/
- UINT8 Peg3Aspm;
-
-/** Offset 0x0694 - MFVC WRR VC Arbitration
- 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES
- 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES
-**/
- UINT8 MfvcWrrArb;
-
-/** Offset 0x0695 - BZM Support
- 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support
- $EN_DIS
-**/
- UINT8 BzmSupport;
-
-/** Offset 0x0696 - VcId_7_0 values
- Select VC ID for arbitration
-**/
- UINT8 VcId_7_0[16];
-
-/** Offset 0x06A6 - Set Hw Parameters enable/disable
- 1: enable, 0: disable, Enable/disable setting of HW parameters
- $EN_DIS
-**/
- UINT8 SetHwParameters;
-
-/** Offset 0x06A7
-**/
- UINT8 UnusedUpdSpace19;
-
-/** Offset 0x06A8 - LTR L1.2 Threshold Value
- LTR L1.2 Threshold Value
-**/
- UINT16 Ltr_L1D2_ThVal;
-
-/** Offset 0x06AA - LTR L1.2 Threshold Scale
- LTR L1.2 Threshold Scale
-**/
- UINT8 Ltr_L1D2_ThScale;
-
-/** Offset 0x06AB - system power state
- system power state indicates the platform power state
-**/
- UINT8 SysPwrState;
-
-/** Offset 0x06AC - Media Death Notification Enable/Disable
- 1: enable, 0: disable, Enable/disable for Media Death Notification
- $EN_DIS
-**/
- UINT8 MediaDeathNotification;
-
-/** Offset 0x06AD - Health Log Notification Enable/Disable
- 1: enable, 0: disable, Enable/disable for Health Log Notification
- $EN_DIS
-**/
- UINT8 HealthLogNotification;
-
-/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable
- 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification
- $EN_DIS
-**/
- UINT8 TempBelowThrottleNotification;
-
-/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable
- 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification
- $EN_DIS
-**/
- UINT8 TempAboveThrottleNotification;
-
-/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable
- 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification
- $EN_DIS
-**/
- UINT8 MissingCommitBitNotification;
-
-/** Offset 0x06B1 - NVMeHoldDisableBit
- 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit
- $EN_DIS
-**/
- UINT8 NVMeHoldDisableBit;
-
-/** Offset 0x06B2 - Ddr4OneDpc
- DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
- or on both (default)
- 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
-**/
- UINT8 Ddr4OneDpc;
-
-/** Offset 0x06B3 - Ch Hash Override POR settings
- Enable/Disable Override Channel Hash Support POR values
- $EN_DIS
-**/
- UINT8 ChHashOverride;
-
-/** Offset 0x06B4 - PDA Enumeration
- Enables/Disable PDA Enumeration
- $EN_DIS
-**/
- UINT8 PDA;
-
-/** Offset 0x06B5 - DPin Policy
- Set DPin Policy. Internal Only:All display ports are for internal only. External
- First:All display ports are for external only, if there is no External DP-In presence
- presents then IOM will use all ports internal only
- 0: Internal Only, 1: External First
-**/
- UINT8 DpInExternalEn;
-
-/** Offset 0x06B6 - DPin External Ports Number
- Total number of External Gfx DpIn Port present on Board. Currently hardware wise
- max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports
-**/
- UINT8 NumberOfDpInPort;
-
-/** Offset 0x06B7 - DPin External Port Connect Map
- Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port.
-**/
- UINT8 DpInPortConnectMap;
-
-/** Offset 0x06B8 - Command Pins Mapping
- BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
- 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending.
-**/
- UINT8 Lp5CccConfig[4];
-
-/** Offset 0x06BC - Command Pins Mirrored
- BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
- 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror.
-**/
- UINT32 CmdMirror[1];
-
-/** Offset 0x06C0 - CPU BCLK SSC Enable
- Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled.
- $EN_DIS
-**/
- UINT8 CpuBclkSpread;
-
-/** Offset 0x06C1 - McParity
- CMI/MC Parity Control
- $EN_DIS
-**/
- UINT8 McParity;
-
-/** Offset 0x06C2 - Vddq Voltage Override
- # is multiple of 1mV where 0 means Auto.
-**/
- UINT16 VddqVoltageOverride;
-
-/** Offset 0x06C4 - Extended Bank Hashing
- Eanble/Disable ExtendedBankHashing
- $EN_DIS
-**/
- UINT8 ExtendedBankHashing;
-
-/** Offset 0x06C5 - Skip external display device scanning
- Enable: Do not scan for external display device, Disable (Default): Scan external
- display devices
- $EN_DIS
-**/
- UINT8 SkipExtGfxScan;
-
-/** Offset 0x06C6 - Generate BIOS Data ACPI Table
- Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
- $EN_DIS
-**/
- UINT8 BdatEnable;
-
-/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM
- Detect and report if external graphics device only support LegacyOpROM or not (to
- support CSM auto-enable). Enable(Default)=1, Disable=0
- $EN_DIS
-**/
- UINT8 ScanExtGfxForLegacyOpRom;
-
-/** Offset 0x06C8 - Lock PCU Thermal Management registers
- Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
- $EN_DIS
-**/
- UINT8 LockPTMregs;
-
-/** Offset 0x06C9 - Rsvd
- Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1):
- Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE
- peak values unmodified
- $EN_DIS
-**/
- UINT8 PegGen3Rsvd;
-
-/** Offset 0x06CA - Panel Power Enable
- Control for enabling/disabling VDD force bit (Required only for early enabling of
- eDP panel). 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 PanelPowerEnable;
-
-/** Offset 0x06CB - BdatTestType
- Indicates the type of Memory Training data to populate into the BDAT ACPI table.
- 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
-**/
- UINT8 BdatTestType;
-
-/** Offset 0x06CC - PMR Size
- Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot
-**/
- UINT32 DmaBufferSize;
-
-/** Offset 0x06D0 - VT-d/IOMMU Boot Policy
- BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS
-**/
- UINT8 PreBootDmaMask;
-
-/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq
- Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default):
- Enable EQ Phase1 Static Presets Programming
- $EN_DIS
-**/
- UINT8 DmiHweq;
-
-/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass
- CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1):
- Enable Phase 23 Bypass
- $EN_DIS
-**/
- UINT8 Gen3EqPhase23Bypass;
-
-/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass
- CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1):
- Enable Phase 3 Bypass
- $EN_DIS
-**/
- UINT8 Gen3EqPhase3Bypass;
-
-/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable
- Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0)(Default):
- Disable Local Transmitter Coefficient Override, Enabled(0x1): Enable Local Transmitter
- Coefficient Override
- $EN_DIS
-**/
- UINT8 Gen3LtcoEnable;
-
-/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable
- Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote
- Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote
- Transmitter Coefficient/Preset Override
- $EN_DIS
-**/
- UINT8 Gen3RtcoRtpoEnable;
-
-/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient
- Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10,
- 2 is default for each lane
-**/
- UINT8 DmiGen3Ltcpre[8];
-
-/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient
- Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default
- for each lane
-**/
- UINT8 DmiGen3Ltcpo[8];
-
-/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm
- CPU_PCIE_EQ_PARAM. Coefficient C-1.
-**/
- UINT8 CpuDmiHwEqGen3CoeffListCm[8];
-
-/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp
- CPU_PCIE_EQ_PARAM. Coefficient C+1.
-**/
- UINT8 CpuDmiHwEqGen3CoeffListCp[8];
-
-/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable
- Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable,
- Manual(0x1): Enable DmiGen3DsPresetEnable
- $EN_DIS
-**/
- UINT8 DmiGen3DsPresetEnable;
-
-/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
- for each lane
-**/
- UINT8 DmiGen3DsPortRxPreset[8];
-
-/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
- for each lane
-**/
- UINT8 DmiGen3DsPortTxPreset[8];
-
-/** Offset 0x0707 - Program DMI GEN3 Extended number of VC
- (DEPRECATED)
-**/
- UINT8 DmiGen3MultiVC;
-
-/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control
- (DEPRECATED)
- $EN_DIS
-**/
- UINT8 DmiGen3Vc1Control;
-
-/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl
- (DEPRECATED)
- $EN_DIS
-**/
- UINT8 DmiGen3VcMControl;
-
-/** Offset 0x070A - DMI Secure Register Lock:{Combo
- (DEPRECATED)
- 0:Disable, 1:Enable
-**/
- UINT8 DmiSrl;
-
-/** Offset 0x070B - DMI Scramble Enable:{Combo
- (DEPRECATED)
- 0:Disable, 1:Enable
-**/
- UINT8 DmiScramble;
-
-/** Offset 0x070C - DMI Max Payload Size:{Combo
- (DEPRECATED)
- 0:Auto, 1:128 TLP, 2:256 TLP
-**/
- UINT8 DmiMaxPayload;
-
-/** Offset 0x070D - DPin Dynamic Switch Policy
- Dynamic one-time switch from iGFx to dGFx after boot to OS
- 0: Disble, 1: Enable
-**/
- UINT8 DPinDynamicSwitch;
-
-/** Offset 0x070E - Delay before sending commn
- Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this
- value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default
- is 0 second
-**/
- UINT16 DPinDynamicSwitchDelay0;
-
-/** Offset 0x0710 - Delay before IOM de-assert HPD
- Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending
- dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second
-**/
- UINT16 DPinDynamicSwitchDelay1;
-
-/** Offset 0x0712 - SaPreMemTestRsvd
- Reserved for SA Pre-Mem Test
- $EN_DIS
-**/
- UINT8 SaPreMemTestRsvd[28];
-
-/** Offset 0x072E - TotalFlashSize
- Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
-**/
- UINT16 TotalFlashSize;
-
-/** Offset 0x0730 - BiosSize
- The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard !=
- 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected
- Range) so that a BIOS Update Script can be stored in the DPR.
-**/
- UINT16 BiosSize;
-
-/** Offset 0x0732 - SecurityTestRsvd
- Reserved for SA Pre-Mem Test
- $EN_DIS
-**/
- UINT8 SecurityTestRsvd[12];
-
-/** Offset 0x073E - Smbus dynamic power gating
- Disable or Enable Smbus dynamic power gating.
- $EN_DIS
-**/
- UINT8 SmbusDynamicPowerGating;
-
-/** Offset 0x073F - Disable and Lock Watch Dog Register
- Set 1 to clear WDT status, then disable and lock WDT registers.
- $EN_DIS
-**/
- UINT8 WdtDisableAndLock;
-
-/** Offset 0x0740 - SMBUS SPD Write Disable
- Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
- Disable bit. For security recommendations, SPD write disable bit must be set.
- $EN_DIS
-**/
- UINT8 SmbusSpdWriteDisable;
-
-/** Offset 0x0741 - VC Type
- Virtual Channel Type Select: 0: VC0, 1: VC1.
- 0: VC0, 1: VC1
-**/
- UINT8 PchHdaVcType;
-
-/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system
- 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
- driver or SST driver supported).
- $EN_DIS
-**/
- UINT8 PchHdaDspUaaCompliance;
-
-/** Offset 0x0743 - Enable HD Audio Link
- Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkHdaEnable;
-
-/** Offset 0x0744 - Enable HDA SDI lanes
- Enable/disable HDA SDI lanes.
-**/
- UINT8 PchHdaSdiEnable[2];
-
-/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD)
- Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1:
- FORCE_ENABLE, 2: FORCE_DISABLE.
- 0: POR, 1: Force Enable, 2: Force Disable
-**/
- UINT8 PchHdaTestPowerClockGating;
-
-/** Offset 0x0747 - Enable HD Audio DMIC_N Link
- Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
-**/
- UINT8 PchHdaAudioLinkDmicEnable[2];
-
-/** Offset 0x0749
-**/
- UINT8 UnusedUpdSpace20[3];
-
-/** Offset 0x074C - DMIC<N> ClkA Pin Muxing (N - DMIC number)
- Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
-**/
- UINT32 PchHdaAudioLinkDmicClkAPinMux[2];
-
-/** Offset 0x0754 - DMIC<N> ClkB Pin Muxing
- Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_*
-**/
- UINT32 PchHdaAudioLinkDmicClkBPinMux[2];
-
-/** Offset 0x075C - Enable HD Audio DSP
- Enable/disable HD Audio DSP feature.
- $EN_DIS
-**/
- UINT8 PchHdaDspEnable;
-
-/** Offset 0x075D
-**/
- UINT8 UnusedUpdSpace21[3];
-
-/** Offset 0x0760 - DMIC<N> Data Pin Muxing
- Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
-**/
- UINT32 PchHdaAudioLinkDmicDataPinMux[2];
-
-/** Offset 0x0768 - Enable HD Audio SSP0 Link
- Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
-**/
- UINT8 PchHdaAudioLinkSspEnable[6];
-
-/** Offset 0x076E - Enable HD Audio SoundWire#N Link
- Enable/disable HD Audio SNDW#N link. Muxed with HDA.
-**/
- UINT8 PchHdaAudioLinkSndwEnable[4];
-
-/** Offset 0x0772 - iDisp-Link Frequency
- iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
- 4: 96MHz, 3: 48MHz
-**/
- UINT8 PchHdaIDispLinkFrequency;
-
-/** Offset 0x0773 - iDisp-Link T-mode
- iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T(Default), 4: 16T
- 0: 2T, 2: 4T, 3: 8T, 4: 16T
-**/
- UINT8 PchHdaIDispLinkTmode;
-
-/** Offset 0x0774 - iDisplay Audio Codec disconnection
- 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
- $EN_DIS
-**/
- UINT8 PchHdaIDispCodecDisconnect;
-
-/** Offset 0x0775 - Force ME DID Init Status
- Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
- ME DID init stat value
- $EN_DIS
-**/
- UINT8 DidInitStat;
-
-/** Offset 0x0776 - CPU Replaced Polling Disable
- Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
- $EN_DIS
-**/
- UINT8 DisableCpuReplacedPolling;
-
-/** Offset 0x0777 - ME DID Message
- (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable
- will prevent the DID message from being sent)
- $EN_DIS
-**/
- UINT8 SendDidMsg;
-
-/** Offset 0x0778 - Check HECI message before send
- Test, 0: disable, 1: enable, Enable/Disable message check.
- $EN_DIS
-**/
- UINT8 DisableMessageCheck;
-
-/** Offset 0x0779 - Skip MBP HOB
- Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
- $EN_DIS
-**/
- UINT8 SkipMbpHob;
-
-/** Offset 0x077A - HECI2 Interface Communication
- Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
- $EN_DIS
-**/
- UINT8 HeciCommunication2;
-
-/** Offset 0x077B - Enable KT device
- Test, 0: disable, 1: enable, Enable or Disable KT device.
- $EN_DIS
-**/
- UINT8 KtDeviceEnable;
-
-/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1
- Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs
-**/
- UINT32 CpuPcie1Rtd3Gpio[24];
-
-/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2
- Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs
-**/
- UINT32 CpuPcie2Rtd3Gpio[24];
-
-/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3
- Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs
-**/
- UINT32 CpuPcie3Rtd3Gpio[24];
-
-/** Offset 0x089C - Skip CPU replacement check
- Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
- $EN_DIS
-**/
- UINT8 SkipCpuReplacementCheck;
-
-/** Offset 0x089D - PCI Express Dekel Workaround
- Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum,
- default is 2
-**/
- UINT8 CpuPcieRpDekelSquelchWa;
-
-/** Offset 0x089E - Serial Io Uart Debug Mode
- Select SerialIo Uart Controller mode
- 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
- 4:SerialIoUartSkipInit
-**/
- UINT8 SerialIoUartDebugMode;
-
-/** Offset 0x089F
-**/
- UINT8 UnusedUpdSpace22;
-
-/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT
- Select RX pin muxing for SerialIo UART used for debug
-**/
- UINT32 SerialIoUartDebugRxPinMux;
-
-/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM
- Select TX pin muxing for SerialIo UART used for debug
-**/
- UINT32 SerialIoUartDebugTxPinMux;
-
-/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM
- Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
- for possible values.
-**/
- UINT32 SerialIoUartDebugRtsPinMux;
-
-/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM
- Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
- for possible values.
-**/
- UINT32 SerialIoUartDebugCtsPinMux;
-
-/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor
- AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
- 1/100 units, where a value of 125 would apply a 1.25 scale factor.
-**/
- UINT8 Avx2VoltageScaleFactor;
-
-/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor
- AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200
- in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
-**/
- UINT8 Avx512VoltageScaleFactor;
-
-/** Offset 0x08B2 - Lane Used of CSI port
- Lane Used of each CSI port
- 1:x1, 2:x2, 3:x3, 4:x4, 8:x8
-**/
- UINT8 IpuLaneUsed[8];
-
-/** Offset 0x08BA - Lane Used of CSI port
- Speed of each CSI port
- 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps
-**/
- UINT8 CsiSpeed[8];
-
-/** Offset 0x08C2 - DPmem Support
- 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support
- $EN_DIS
-**/
- UINT8 DpmemSupport;
-
-/** Offset 0x08C3 - Core VF Point Offset Mode
- Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes;
- <b>0: Legacy</b>; 1: Selection.
- 0:Legacy, 1:Selection
-**/
- UINT8 CoreVfPointOffsetMode;
-
-/** Offset 0x08C4 - Core VF Point Offset
- Array used to specifies the Offset Voltage applied to the each selected Core VF
- Point. This voltage is specified in millivolts.
-**/
- UINT16 CoreVfPointOffset[15];
-
-/** Offset 0x08E2 - Core VF Point Offset Prefix
- Sets the CoreVfPointOffset value as positive or negative for corresponding core
- VF Point; <b>0: Positive </b>; 1: Negative.
- 0:Positive, 1:Negative
-**/
- UINT8 CoreVfPointOffsetPrefix[15];
-
-/** Offset 0x08F1 - Core VF Point Ratio
- Array for the each selected Core VF Point to display the ration.
-**/
- UINT8 CoreVfPointRatio[15];
-
-/** Offset 0x0900 - Core VF Point Count
- Number of supported Core Voltage & Frequency Point Offset
-**/
- UINT8 CoreVfPointCount;
-
-/** Offset 0x0901 - Enable CPU CrashLog GPRs dump
- Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only
- disable Smm GPRs dump
- 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled
-**/
- UINT8 CrashLogGprs;
-
-/** Offset 0x0902
-**/
- UINT8 UnusedUpdSpace23[2];
-
-/** Offset 0x0904 - Bitmask of disable cores
- Core mask is a bitwise indication of which core should be disabled. <b>0x00=Default</b>;
- Bit 0 - core 0, bit 7 - core 7.
-**/
- UINT32 DisableCoreMask;
-
-/** Offset 0x0908 - REFRESH_PANIC_WM
- <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm
-**/
- UINT8 RefreshPanicWm;
-
-/** Offset 0x0909 - REFRESH_HP_WM
- <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm
-**/
- UINT8 RefreshHpWm;
-
-/** Offset 0x090A - Support Unlimited ICCMAX
- Support Unlimited ICCMAX more than maximum value 255.75A; <b>0: Disabled</b>; 1: Enabled.
- $EN_DIS
-**/
- UINT8 UnlimitedIccMax;
-
-/** Offset 0x090B - Per Core Max Ratio override
- Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new
- favored core ratio to each Core. <b>0: Disable</b>, 1: enable
- $EN_DIS
-**/
- UINT8 PerCoreRatioOverride;
-
-/** Offset 0x090C - Per Core Current Max Ratio
- Array for the Per Core Max Ratio
-**/
- UINT8 PerCoreRatio[10];
-
-/** Offset 0x0916 - Margin Limit Check
- Margin Limit Check. Choose level of margin check
- 0:Disable, 1:L1, 2:L2, 3:Both
-**/
- UINT8 MarginLimitCheck;
-
-/** Offset 0x0917
-**/
- UINT8 UnusedUpdSpace24;
-
-/** Offset 0x0918 - Margin Limit L2
- % of L1 check for margin limit check
-**/
- UINT16 MarginLimitL2;
-
-/** Offset 0x091A - Iotg Pll SscEn
- Enable or disable CPU SSC. 0: Disable, <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 IotgPllSscEn;
-
-/** Offset 0x091B - GPIO Override
- Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings
- before moved to FSP. Available configurations 0: Disable;1: Level 1 - skips GpioSetNativePadByFunction;Level
- 2 - skips GpioSetNativePadByFunction and GpioSetPadMode
-**/
- UINT8 GpioOverride;
-
-/** Offset 0x091C - Write0 enabling
- Enable/Disable Write0
- $EN_DIS
-**/
- UINT8 WRITE0;
-
-/** Offset 0x091D
-**/
- UINT8 UnusedUpdSpace25[3];
-
-/** Offset 0x0920
-**/
- UINT32 VccInVoltageOverride;
-
-/** Offset 0x0924 - Dynamic Memory Timings Changes
- Dynamic Memory Timings Changes; <b>0: Disabled</b>; 1: Enabled.
- $EN_DIS
-**/
- UINT8 DynamicMemoryChange;
-
-/** Offset 0x0925 - IbeccErrorInj
- In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable
- this option for production systems.
- $EN_DIS
-**/
- UINT8 IbeccErrorInj;
-
-/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable
- Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable,
- Manual(0x1): Enable DmiGen3UsPresetEnable
- $EN_DIS
-**/
- UINT8 DmiGen3UsPresetEnable;
-
-/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
- for each lane
-**/
- UINT8 DmiGen3UsPortRxPreset[8];
-
-/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane
- Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
- for each lane
-**/
- UINT8 DmiGen3UsPortTxPreset[8];
-
-/** Offset 0x0937 - BCLK Frequency Source
- Clock source of BCLK OC frequency, <b>0:CPU BCLK</b>, 1:PCH BCLK, 2:External CLK
- 0:CPU BCLK, 1:PCH BCLK, 2:External CLK
-**/
- UINT8 BclkSource;
-
-/** Offset 0x0938 - CPU BCLK OC Frequency
- CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz <b>0
- - Auto</b>. Range is 8000-50000 (10KHz).
-**/
- UINT32 CpuBclkOcFrequency;
-
-/** Offset 0x093C - Ring CCF Auto Gv Disable Down
- Ring CCF Auto Gv Disable Down, 0: Disabled, <b>1:Fused default</b>
- 0:Disabled, 1:Fused default
-**/
- UINT8 RingCcfAutoGvDisable;
-
-/** Offset 0x093D - SA/Uncore voltage mode
- SA/Uncore voltage mode; <b>0: Adaptive</b>; 1: Override.
- $EN_DIS
-**/
- UINT8 SaVoltageMode;
-
-/** Offset 0x093E - SA/Uncore Voltage Override
- The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override
- mode. Valid Range 0 to 2000
-**/
- UINT16 SaVoltageOverride;
-
-/** Offset 0x0940 - SA/Uncore Extra Turbo voltage
- Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode.
- Valid Range 0 to 2000
-**/
- UINT16 SaExtraTurboVoltage;
-
-/** Offset 0x0942 - DdrMemoryDown
- DDR Memory Down Support.
- $EN_DIS
-**/
- UINT8 DdrMemoryDown;
-
-/** Offset 0x0943
-**/
- UINT8 UnusedUpdSpace26;
-
-/** Offset 0x0944 - The VccIn Max Voltage Limit
- This will override maximum VCCIN voltage limit to the voltage value specified. <b>0
- - no override</b> Valid Range 0 to 3000mV
-**/
- UINT16 VccInMaxLimit;
-
-/** Offset 0x0946 - VccIO Voltage Override
- This will override VccIO output voltage level to the voltage value specified. Valid
- Range 0 to 2000
-**/
- UINT16 VccIoVoltageOverride;
-
-/** Offset 0x0948 - Boost VRef Voltage
- <b> Default: 0: 0.7V </b> 1: 1.0V to support the high frequencies needed for BCLK OC.
- 0: 0.7V , 1:1.0V
-**/
- UINT8 BoostRefVoltage;
-
-/** Offset 0x0949 - Pcie Ref Pll SSC
- Pcie Ref Pll SSC Percentatge. 0x0: 0.0%, 0x1: 0.1%, 0x2:0.2%, 0x3: 0.3%, 0x4: 0.4%,
- 0x5: 0.5%, 0xFE: Disable, 0xFF: Auto
-**/
- UINT8 PcieRefPllSsc;
-
-/** Offset 0x094A - Refresh Watermarks
- Refresh Watermark, High, Low
- 1:Enable Refresh Watermark High (Default), 0:Enable Refresh Watermark Low
-**/
- UINT8 RefreshWm;
-
-/** Offset 0x094B
-**/
- UINT8 UnusedUpdSpace27[4];
-
-/** Offset 0x094F
-**/
- UINT8 ReservedFspmUpd2[1];
-} FSP_M_CONFIG;
-
-/** Fsp M UPD Configuration
-**/
-typedef struct {
-
-/** Offset 0x0000
-**/
- FSP_UPD_HEADER FspUpdHeader;
-
-/** Offset 0x0020
-**/
- FSPM_ARCH_UPD FspmArchUpd;
-
-/** Offset 0x0040
-**/
- FSP_M_CONFIG FspmConfig;
-
-/** Offset 0x0950
-**/
- UINT8 UnusedUpdSpace28[6];
-
-/** Offset 0x0956
-**/
- UINT16 UpdTerminator;
-} FSPM_UPD;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
deleted file mode 100644
index 569eaea..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
+++ /dev/null
@@ -1,4219 +0,0 @@
-/** @file
-
-Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPSUPD_H__
-#define __FSPSUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-
-///
-/// Azalia Header structure
-///
-typedef struct {
- UINT16 VendorId; ///< Codec Vendor ID
- UINT16 DeviceId; ///< Codec Device ID
- UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
- UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
- UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
- UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
-} AZALIA_HEADER;
-
-///
-/// Audio Azalia Verb Table structure
-///
-typedef struct {
- AZALIA_HEADER Header; ///< AZALIA PCH header
- UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
-} AUDIO_AZALIA_VERB_TABLE;
-
-///
-/// Refer to the definition of PCH_INT_PIN
-///
-typedef enum {
- SiPchNoInt, ///< No Interrupt Pin
- SiPchIntA,
- SiPchIntB,
- SiPchIntC,
- SiPchIntD
-} SI_PCH_INT_PIN;
-///
-/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
-///
-typedef struct {
- UINT8 Device; ///< Device number
- UINT8 Function; ///< Device function
- UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
- UINT8 Irq; ///< IRQ to be set for device.
-} SI_PCH_DEVICE_INTERRUPT_CONFIG;
-
-#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
-
-
-/** Fsp S Configuration
-**/
-typedef struct {
-
-/** Offset 0x0020 - Logo Pointer
- Points to PEI Display Logo Image
-**/
- UINT32 LogoPtr;
-
-/** Offset 0x0024 - Logo Size
- Size of PEI Display Logo Image
-**/
- UINT32 LogoSize;
-
-/** Offset 0x0028 - Blt Buffer Address
- Address of Blt buffer
-**/
- UINT32 BltBufferAddress;
-
-/** Offset 0x002C - Blt Buffer Size
- Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
- EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
-**/
- UINT32 BltBufferSize;
-
-/** Offset 0x0030 - Graphics Configuration Ptr
- Points to VBT
-**/
- UINT32 GraphicsConfigPtr;
-
-/** Offset 0x0034 - Enable Device 4
- Enable/disable Device 4
- $EN_DIS
-**/
- UINT8 Device4Enable;
-
-/** Offset 0x0035 - Show SPI controller
- Enable/disable to show SPI controller.
- $EN_DIS
-**/
- UINT8 ShowSpiController;
-
-/** Offset 0x0036
-**/
- UINT8 UnusedUpdSpace0[2];
-
-/** Offset 0x0038 - MicrocodeRegionBase
- Memory Base of Microcode Updates
-**/
- UINT32 MicrocodeRegionBase;
-
-/** Offset 0x003C - MicrocodeRegionSize
- Size of Microcode Updates
-**/
- UINT32 MicrocodeRegionSize;
-
-/** Offset 0x0040 - Turbo Mode
- Enable/Disable Turbo mode. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 TurboMode;
-
-/** Offset 0x0041 - Enable SATA SALP Support
- Enable/disable SATA Aggressive Link Power Management.
- $EN_DIS
-**/
- UINT8 SataSalpSupport;
-
-/** Offset 0x0042 - Enable SATA ports
- Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
- and so on.
-**/
- UINT8 SataPortsEnable[8];
-
-/** Offset 0x004A - Enable SATA DEVSLP Feature
- Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
- port, byte0 for port0, byte1 for port1, and so on.
-**/
- UINT8 SataPortsDevSlp[8];
-
-/** Offset 0x0052 - Enable USB2 ports
- Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
- port1, and so on.
-**/
- UINT8 PortUsb20Enable[16];
-
-/** Offset 0x0062 - Enable USB3 ports
- Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
- port1, and so on.
-**/
- UINT8 PortUsb30Enable[10];
-
-/** Offset 0x006C - Enable xDCI controller
- Enable/disable to xDCI controller.
- $EN_DIS
-**/
- UINT8 XdciEnable;
-
-/** Offset 0x006D
-**/
- UINT8 UnusedUpdSpace1[3];
-
-/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
- The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
-**/
- UINT32 DevIntConfigPtr;
-
-/** Offset 0x0074 - Number of DevIntConfig Entry
- Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
- must not be NULL.
-**/
- UINT8 NumOfDevIntConfig;
-
-/** Offset 0x0075 - PIRQx to IRQx Map Config
- PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
- PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
- 8259 PCI mode.
-**/
- UINT8 PxRcConfig[8];
-
-/** Offset 0x007D - Select GPIO IRQ Route
- GPIO IRQ Select. The valid value is 14 or 15.
-**/
- UINT8 GpioIrqRoute;
-
-/** Offset 0x007E - Select SciIrqSelect
- SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
-**/
- UINT8 SciIrqSelect;
-
-/** Offset 0x007F - Select TcoIrqSelect
- TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
-**/
- UINT8 TcoIrqSelect;
-
-/** Offset 0x0080 - Enable/Disable Tco IRQ
- Enable/disable TCO IRQ
- $EN_DIS
-**/
- UINT8 TcoIrqEnable;
-
-/** Offset 0x0081 - PCH HDA Verb Table Entry Number
- Number of Entries in Verb Table.
-**/
- UINT8 PchHdaVerbTableEntryNum;
-
-/** Offset 0x0082
-**/
- UINT8 UnusedUpdSpace2[2];
-
-/** Offset 0x0084 - PCH HDA Verb Table Pointer
- Pointer to Array of pointers to Verb Table.
-**/
- UINT32 PchHdaVerbTablePtr;
-
-/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability
- Capability to detect wake initiated by a codec in Sx
-**/
- UINT8 PchHdaCodecSxWakeCapability;
-
-/** Offset 0x0089 - Enable SATA
- Enable/disable SATA controller.
- $EN_DIS
-**/
- UINT8 SataEnable;
-
-/** Offset 0x008A - SATA Mode
- Select SATA controller working mode.
- 0:AHCI, 1:RAID
-**/
- UINT8 SataMode;
-
-/** Offset 0x008B - SPIn Device Mode
- Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available
- modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden
-**/
- UINT8 SerialIoSpiMode[7];
-
-/** Offset 0x0092 - SPI<N> Chip Select Polarity
- Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
- 1:SerialIoSpiCsActiveHigh
-**/
- UINT8 SerialIoSpiCsPolarity[14];
-
-/** Offset 0x00A0 - SPI<N> Chip Select Enable
- 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
-**/
- UINT8 SerialIoSpiCsEnable[14];
-
-/** Offset 0x00AE - SPIn Default Chip Select Output
- Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
- options: 0:CS0, 1:CS1
-**/
- UINT8 SerialIoSpiDefaultCsOutput[7];
-
-/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW
- Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
- SPI1, ... Available options: 0:HW, 1:SW
-**/
- UINT8 SerialIoSpiCsMode[7];
-
-/** Offset 0x00BC - SPIn Default Chip Select State Low/High
- Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ...
- Available options: 0:Low, 1:High
-**/
- UINT8 SerialIoSpiCsState[7];
-
-/** Offset 0x00C3 - UARTn Device Mode
- Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available
- modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
- 4:SerialIoUartSkipInit
-**/
- UINT8 SerialIoUartMode[7];
-
-/** Offset 0x00CA
-**/
- UINT8 UnusedUpdSpace3[2];
-
-/** Offset 0x00CC - Default BaudRate for each Serial IO UART
- Set default BaudRate Supported from 0 - default to 6000000
-**/
- UINT32 SerialIoUartBaudRate[7];
-
-/** Offset 0x00E8 - Default ParityType for each Serial IO UART
- Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
-**/
- UINT8 SerialIoUartParity[7];
-
-/** Offset 0x00EF - Default DataBits for each Serial IO UART
- Set default word length. 0: Default, 5,6,7,8
-**/
- UINT8 SerialIoUartDataBits[7];
-
-/** Offset 0x00F6 - Default StopBits for each Serial IO UART
- Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
- TwoStopBits
-**/
- UINT8 SerialIoUartStopBits[7];
-
-/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode
- Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
-**/
- UINT8 SerialIoUartPowerGating[7];
-
-/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it
- Set DMA/PIO mode. 0: Disabled, 1: Enabled
-**/
- UINT8 SerialIoUartDmaEnable[7];
-
-/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines
- Enables UART hardware flow control, CTS and RTS lines.
-**/
- UINT8 SerialIoUartAutoFlow[7];
-
-/** Offset 0x0112
-**/
- UINT8 UnusedUpdSpace4[2];
-
-/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy
- Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
- for possible values.
-**/
- UINT32 SerialIoUartRtsPinMuxPolicy[7];
-
-/** Offset 0x0130 - SerialIoUartCtsPinMuxPolicy
- Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
- for possible values.
-**/
- UINT32 SerialIoUartCtsPinMuxPolicy[7];
-
-/** Offset 0x014C - SerialIoUartRxPinMuxPolicy
- Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for
- possible values.
-**/
- UINT32 SerialIoUartRxPinMuxPolicy[7];
-
-/** Offset 0x0168 - SerialIoUartTxPinMuxPolicy
- Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for
- possible values.
-**/
- UINT32 SerialIoUartTxPinMuxPolicy[7];
-
-/** Offset 0x0184 - UART Number For Debug Purpose
- UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5,
- 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used
- for debug purpose.
- 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6
-**/
- UINT8 SerialIoDebugUartNumber;
-
-/** Offset 0x0185 - Serial IO UART DBG2 table
- Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
- 1: Enable.
-**/
- UINT8 SerialIoUartDbg2[7];
-
-/** Offset 0x018C - I2Cn Device Mode
- Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
- modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden
-**/
- UINT8 SerialIoI2cMode[8];
-
-/** Offset 0x0194 - Serial IO I2C SDA Pin Muxing
- Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for
- possible values.
-**/
- UINT32 PchSerialIoI2cSdaPinMux[8];
-
-/** Offset 0x01B4 - Serial IO I2C SCL Pin Muxing
- Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for
- possible values.
-**/
- UINT32 PchSerialIoI2cSclPinMux[8];
-
-/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
- respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
-**/
- UINT8 PchSerialIoI2cPadsTermination[8];
-
-/** Offset 0x01DC - ISH GP GPIO Pin Muxing
- Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER
-**/
- UINT32 IshGpGpioPinMuxing[8];
-
-/** Offset 0x01FC - ISH UART Rx Pin Muxing
- Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_*
-**/
- UINT32 IshUartRxPinMuxing[3];
-
-/** Offset 0x0208 - ISH UART Tx Pin Muxing
- Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_*
-**/
- UINT32 IshUartTxPinMuxing[3];
-
-/** Offset 0x0214 - ISH UART Rts Pin Muxing
- Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values.
-**/
- UINT32 IshUartRtsPinMuxing[3];
-
-/** Offset 0x0220 - ISH UART Rts Pin Muxing
- Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values.
-**/
- UINT32 IshUartCtsPinMuxing[3];
-
-/** Offset 0x022C - ISH I2C SDA Pin Muxing
- Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values.
-**/
- UINT32 IshI2cSdaPinMuxing[3];
-
-/** Offset 0x0238 - ISH I2C SCL Pin Muxing
- Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values.
-**/
- UINT32 IshI2cSclPinMuxing[3];
-
-/** Offset 0x0244 - ISH SPI MOSI Pin Muxing
- Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values.
-**/
- UINT32 IshSpiMosiPinMuxing[2];
-
-/** Offset 0x024C - ISH SPI MISO Pin Muxing
- Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values.
-**/
- UINT32 IshSpiMisoPinMuxing[2];
-
-/** Offset 0x0254 - ISH SPI CLK Pin Muxing
- Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values.
-**/
- UINT32 IshSpiClkPinMuxing[2];
-
-/** Offset 0x025C - ISH SPI CS#N Pin Muxing
- Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible
- values. N-SPI number, 0-1.
-**/
- UINT32 IshSpiCsPinMuxing[4];
-
-/** Offset 0x026C - ISH GP GPIO Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination
- respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index
- 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31
-**/
- UINT8 IshGpGpioPadTermination[8];
-
-/** Offset 0x0274 - ISH UART Rx Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination
- respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1
- Rx, and so on.
-**/
- UINT8 IshUartRxPadTermination[3];
-
-/** Offset 0x0277 - ISH UART Tx Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination
- respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1
- Tx, and so on.
-**/
- UINT8 IshUartTxPadTermination[3];
-
-/** Offset 0x027A - ISH UART Rts Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination
- respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1
- Rts, and so on.
-**/
- UINT8 IshUartRtsPadTermination[3];
-
-/** Offset 0x027D - ISH UART Rts Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination
- respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1
- Cts, and so on.
-**/
- UINT8 IshUartCtsPadTermination[3];
-
-/** Offset 0x0280 - ISH I2C SDA Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination
- respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda,
- and so on.
-**/
- UINT8 IshI2cSdaPadTermination[3];
-
-/** Offset 0x0283 - ISH I2C SCL Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination
- respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl,
- and so on.
-**/
- UINT8 IshI2cSclPadTermination[3];
-
-/** Offset 0x0286 - ISH SPI MOSI Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination
- respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1
- Mosi, and so on.
-**/
- UINT8 IshSpiMosiPadTermination[2];
-
-/** Offset 0x0288 - ISH SPI MISO Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination
- respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1
- Miso, and so on.
-**/
- UINT8 IshSpiMisoPadTermination[2];
-
-/** Offset 0x028A - ISH SPI CLK Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination
- respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk,
- and so on.
-**/
- UINT8 IshSpiClkPadTermination[2];
-
-/** Offset 0x028C - ISH SPI CS#N Pad termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination
- respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1
- Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3
-**/
- UINT8 IshSpiCsPadTermination[4];
-
-/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned
- Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs
- number: 0-1
-**/
- UINT8 PchIshSpiCsEnable[4];
-
-/** Offset 0x0294 - USB Per Port HS Preemphasis Bias
- USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
- 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
-**/
- UINT8 Usb2PhyPetxiset[16];
-
-/** Offset 0x02A4 - USB Per Port HS Transmitter Bias
- USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
- 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
-**/
- UINT8 Usb2PhyTxiset[16];
-
-/** Offset 0x02B4 - USB Per Port HS Transmitter Emphasis
- USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
- 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
-**/
- UINT8 Usb2PhyPredeemp[16];
-
-/** Offset 0x02C4 - USB Per Port Half Bit Pre-emphasis
- USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
- One byte for each port.
-**/
- UINT8 Usb2PhyPehalfbit[16];
-
-/** Offset 0x02D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
- Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
- in arrary can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxDeEmphEnable[10];
-
-/** Offset 0x02DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
- USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
- <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
-**/
- UINT8 Usb3HsioTxDeEmph[10];
-
-/** Offset 0x02E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
- Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
- in arrary can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxDownscaleAmpEnable[10];
-
-/** Offset 0x02F2 - USB 3.0 TX Output Downscale Amplitude Adjustment
- USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
- = 00h</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxDownscaleAmp[10];
-
-/** Offset 0x02FC
-**/
- UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10];
-
-/** Offset 0x0306
-**/
- UINT8 PchUsb3HsioFilterSelNEnable[10];
-
-/** Offset 0x0310
-**/
- UINT8 PchUsb3HsioFilterSelPEnable[10];
-
-/** Offset 0x031A
-**/
- UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10];
-
-/** Offset 0x0324
-**/
- UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10];
-
-/** Offset 0x032E
-**/
- UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10];
-
-/** Offset 0x0338
-**/
- UINT8 PchUsb3HsioFilterSelN[10];
-
-/** Offset 0x0342
-**/
- UINT8 PchUsb3HsioFilterSelP[10];
-
-/** Offset 0x034C - Enable LAN
- Enable/disable LAN controller.
- $EN_DIS
-**/
- UINT8 PchLanEnable;
-
-/** Offset 0x034D - Enable PCH TSN
- Enable/disable TSN on the PCH.
- $EN_DIS
-**/
- UINT8 PchTsnEnable;
-
-/** Offset 0x034E - TSN Link Speed
- Set TSN Link Speed.
- 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps
-**/
- UINT8 PchTsnLinkSpeed;
-
-/** Offset 0x034F
-**/
- UINT8 UnusedUpdSpace5;
-
-/** Offset 0x0350 - PCH TSN0 MAC Address High Bits
- Set TSN0 MAC Address High.
-**/
- UINT32 PchTsn0MacAddressHigh;
-
-/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits
- Set TSN0 MAC Address Low.
-**/
- UINT32 PchTsn0MacAddressLow;
-
-/** Offset 0x0358 - PCIe PTM enable/disable
- Enable/disable Precision Time Measurement for PCIE Root Ports.
-**/
- UINT8 PciePtm[24];
-
-/** Offset 0x0370 - PCIe DPC enable/disable
- Enable/disable Downstream Port Containment for PCIE Root Ports.
-**/
- UINT8 PcieDpc[24];
-
-/** Offset 0x0388 - PCIe DPC extensions enable/disable
- Enable/disable Downstream Port Containment Extensions for PCIE Root Ports.
-**/
- UINT8 PcieEdpc[24];
-
-/** Offset 0x03A0 - USB PDO Programming
- Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
- during later phase. 1: enable, 0: disable
- $EN_DIS
-**/
- UINT8 UsbPdoProgramming;
-
-/** Offset 0x03A1
-**/
- UINT8 UnusedUpdSpace6[3];
-
-/** Offset 0x03A4 - Power button debounce configuration
- Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
- be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
-**/
- UINT32 PmcPowerButtonDebounce;
-
-/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled
- PCH eSPI Master and Slave BME enabled
- $EN_DIS
-**/
- UINT8 PchEspiBmeMasterSlaveEnabled;
-
-/** Offset 0x03A9 - PCH SATA use RST Legacy OROM
- Use PCH SATA RST Legacy OROM when CSM is Enabled
- $EN_DIS
-**/
- UINT8 SataRstLegacyOrom;
-
-/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
- Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
-**/
- UINT8 PchFivrExtV1p05RailEnabledStates;
-
-/** Offset 0x03AB - Mask to enable the platform configuration of external V1p05 VR rail
- External V1P05 Rail Supported Configuration
-**/
- UINT8 PchFivrExtV1p05RailSupportedVoltageStates;
-
-/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
- Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
-**/
- UINT16 PchFivrExtV1p05RailVoltage;
-
-/** Offset 0x03AE - External V1P05 Icc Max Value
- Granularity of this setting is 1mA and maximal possible value is 200mA
-**/
- UINT8 PchFivrExtV1p05RailIccMax;
-
-/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
- Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
-**/
- UINT8 PchFivrExtVnnRailEnabledStates;
-
-/** Offset 0x03B0 - Mask to enable the platform configuration of external Vnn VR rail
- External Vnn Rail Supported Configuration
-**/
- UINT8 PchFivrExtVnnRailSupportedVoltageStates;
-
-/** Offset 0x03B1
-**/
- UINT8 UnusedUpdSpace7;
-
-/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states
- Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420
-**/
- UINT16 PchFivrExtVnnRailVoltage;
-
-/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states
- Granularity of this setting is 1mA and maximal possible value is 200mA
-**/
- UINT8 PchFivrExtVnnRailIccMax;
-
-/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states
- Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in
- Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5
-**/
- UINT8 PchFivrExtVnnRailSxEnabledStates;
-
-/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states
- Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
- (0=0mV, 1=2.5mV, 2=5mV...)
-**/
- UINT16 PchFivrExtVnnRailSxVoltage;
-
-/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states
- Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
- is 1mA and maximal possible value is 200mA
-**/
- UINT8 PchFivrExtVnnRailSxIccMax;
-
-/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage
- This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
- to low current mode voltage.
-**/
- UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime;
-
-/** Offset 0x03BA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage
- This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
- to retention mode voltage.
-**/
- UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime;
-
-/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage
- This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
- to retention mode voltage.
-**/
- UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime;
-
-/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage
- This field has 1us resolution. When value is 0 Transition to 0V is disabled.
-**/
- UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
-
-/** Offset 0x03BE
-**/
- UINT8 UnusedUpdSpace8[2];
-
-/** Offset 0x03C0 - Trace Hub Memory Base
- If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
- trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
- memory is configured properly.
-**/
- UINT32 TraceHubMemBase;
-
-/** Offset 0x03C4 - PMC Debug Message Enable
- When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
- will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
- $EN_DIS
-**/
- UINT8 PmcDbgMsgEn;
-
-/** Offset 0x03C5
-**/
- UINT8 UnusedUpdSpace9[3];
-
-/** Offset 0x03C8 - Pointer of ChipsetInit Binary
- ChipsetInit Binary Pointer.
-**/
- UINT32 ChipsetInitBinPtr;
-
-/** Offset 0x03CC - Length of ChipsetInit Binary
- ChipsetInit Binary Length.
-**/
- UINT32 ChipsetInitBinLen;
-
-/** Offset 0x03D0 - FIVR Dynamic Power Management
- Enable/Disable FIVR Dynamic Power Management.
- $EN_DIS
-**/
- UINT8 PchFivrDynPm;
-
-/** Offset 0x03D1
-**/
- UINT8 UnusedUpdSpace10;
-
-/** Offset 0x03D2 - External V1P05 Icc Max Value
- Granularity of this setting is 1mA and maximal possible value is 500mA
-**/
- UINT16 PchFivrExtV1p05RailIccMaximum;
-
-/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states
- Granularity of this setting is 1mA and maximal possible value is 500mA
-**/
- UINT16 PchFivrExtVnnRailIccMaximum;
-
-/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states
- Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
- is 1mA and maximal possible value is 500mA
-**/
- UINT16 PchFivrExtVnnRailSxIccMaximum;
-
-/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL)
- Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves
- addresseses from range 0x0 - 0x7FF
- $EN_DIS
-**/
- UINT8 PchEspiLockLinkConfiguration;
-
-/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable
- Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads.
- 0: disabled (default), 1: enabled
- $EN_DIS
-**/
- UINT8 PchSpiExtendedBiosDecodeRangeEnable;
-
-/** Offset 0x03DA - Enforce Enhanced Debug Mode
- Determine if ME should enter Enhanced Debug Mode. <b>0: disable</b>, 1: enable
- $EN_DIS
-**/
- UINT8 EnforceEDebugMode;
-
-/** Offset 0x03DB - PchPostMemRsvd
- Reserved for PCH Post-Mem
- $EN_DIS
-**/
- UINT8 PchPostMemRsvd[1];
-
-/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base
- Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode.
-**/
- UINT32 PchSpiExtendedBiosDecodeRangeBase;
-
-/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit
- Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode.
-**/
- UINT32 PchSpiExtendedBiosDecodeRangeLimit;
-
-/** Offset 0x03E4 - CNVi Configuration
- This option allows for automatic detection of Connectivity Solution. [Auto Detection]
- assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
- 0:Disable, 1:Auto
-**/
- UINT8 CnviMode;
-
-/** Offset 0x03E5 - CNVi BT Core
- Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE
- $EN_DIS
-**/
- UINT8 CnviBtCore;
-
-/** Offset 0x03E6 - CNVi BT Audio Offload
- Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE
- $EN_DIS
-**/
- UINT8 CnviBtAudioOffload;
-
-/** Offset 0x03E7
-**/
- UINT8 UnusedUpdSpace11;
-
-/** Offset 0x03E8 - CNVi RF_RESET pin muxing
- Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default)
- or GPP_F4 = 0x194CE404. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h.
-**/
- UINT32 CnviRfResetPinMux;
-
-/** Offset 0x03EC - CNVi CLKREQ pin muxing
- Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default)
- or GPP_F5 = 0x394CE605. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in
- GpioPins*.h.
-**/
- UINT32 CnviClkreqPinMux;
-
-/** Offset 0x03F0 - Enable Host C10 reporting through eSPI
- Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire.
- $EN_DIS
-**/
- UINT8 PchEspiHostC10ReportEnable;
-
-/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable
- 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
- Sus Well PG
- $EN_DIS
-**/
- UINT8 PmcUsb2PhySusPgEnable;
-
-/** Offset 0x03F2 - PCH USB OverCurrent mapping enable
- 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
- mapping allow for NOA usage of OC pins
- $EN_DIS
-**/
- UINT8 PchUsbOverCurrentEnable;
-
-/** Offset 0x03F3 - Espi Lgmr Memory Range decode
- This option enables or disables espi lgmr
- $EN_DIS
-**/
- UINT8 PchEspiLgmrEnable;
-
-/** Offset 0x03F4 - External V1P05 Control Ramp Timer value
- Hold off time to be used when changing the v1p05_ctrl for external bypass value in us
-**/
- UINT8 PchFivrExtV1p05RailCtrlRampTmr;
-
-/** Offset 0x03F5 - External VNN Control Ramp Timer value
- Hold off time to be used when changing the vnn_ctrl for external bypass value in us
-**/
- UINT8 PchFivrExtVnnRailCtrlRampTmr;
-
-/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config
- Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset,
- 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte
- for each port, byte0 for port0, byte1 for port1, and so on.
-**/
- UINT8 SataPortsDevSlpResetConfig[8];
-
-/** Offset 0x03FE - HECI3 state
- The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
- DEPRECATED 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 Heci3Enabled;
-
-/** Offset 0x03FF - PCHHOT# pin
- Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchHotEnable;
-
-/** Offset 0x0400 - SATA LED
- SATA LED indicating SATA controller activity. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 SataLedEnable;
-
-/** Offset 0x0401 - VRAlert# Pin
- When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
- to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchPmVrAlert;
-
-/** Offset 0x0402 - AMT Switch
- Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
- $EN_DIS
-**/
- UINT8 AmtEnabled;
-
-/** Offset 0x0403 - WatchDog Timer Switch
- Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting
- is invalid if AmtEnabled is 0.
- $EN_DIS
-**/
- UINT8 WatchDogEnabled;
-
-/** Offset 0x0404 - Manageability Mode set by Mebx
- Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
- $EN_DIS
-**/
- UINT8 ManageabilityMode;
-
-/** Offset 0x0405 - PET Progress
- Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
- PET Events. Setting is invalid if AmtEnabled is 0.
- $EN_DIS
-**/
- UINT8 FwProgress;
-
-/** Offset 0x0406 - SOL Switch
- Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx.
- Setting is invalid if AmtEnabled is 0.
- $EN_DIS
-**/
- UINT8 AmtSolEnabled;
-
-/** Offset 0x0407
-**/
- UINT8 UnusedUpdSpace12;
-
-/** Offset 0x0408 - OS Timer
- 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
-**/
- UINT16 WatchDogTimerOs;
-
-/** Offset 0x040A - BIOS Timer
- 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0.
-**/
- UINT16 WatchDogTimerBios;
-
-/** Offset 0x040C - Remote Assistance Trigger Availablilty
- Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx.
- $EN_DIS
-**/
- UINT8 RemoteAssistance;
-
-/** Offset 0x040D - KVM Switch
- Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting
- is invalid if AmtEnabled is 0.
- $EN_DIS
-**/
- UINT8 AmtKvmEnabled;
-
-/** Offset 0x040E - Force MEBX execution
- Enable/Disable. 0: Disable, 1: enable, Force MEBX execution.
- $EN_DIS
-**/
- UINT8 ForcMebxSyncUp;
-
-/** Offset 0x040F - PCH PCIe root port connection type
- 0: built-in device, 1:slot
-**/
- UINT8 PcieRpSlotImplemented[24];
-
-/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability
- Enable/Disable PCIE RP Access Control Services Extended Capability
-**/
- UINT8 PcieRpAcsEnabled[24];
-
-/** Offset 0x043F - PCIE RP Clock Power Management
- Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
- can still be controlled by L1 PM substates mechanism
-**/
- UINT8 PcieRpEnableCpm[24];
-
-/** Offset 0x0457
-**/
- UINT8 UnusedUpdSpace13[1];
-
-/** Offset 0x0458 - PCIE RP Detect Timeout Ms
- The number of milliseconds within 0~65535 in reference code will wait for link to
- exit Detect state for enabled ports before assuming there is no device and potentially
- disabling the port.
-**/
- UINT16 PcieRpDetectTimeoutMs[24];
-
-/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating
- Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
- PCH-H. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PmcModPhySusPgEnable;
-
-/** Offset 0x0489 - V1p05-PHY supply external FET control
- Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY
- supply. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PmcV1p05PhyExtFetControlEn;
-
-/** Offset 0x048A - V1p05-IS supply external FET control
- Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS
- supply. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PmcV1p05IsExtFetControlEn;
-
-/** Offset 0x048B - Enable/Disable PavpEnable
- Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
- $EN_DIS
-**/
- UINT8 PavpEnable;
-
-/** Offset 0x048C - CdClock Frequency selection
- 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2:
- 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
- 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz,
- 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
-**/
- UINT8 CdClock;
-
-/** Offset 0x048D - Enable/Disable PeiGraphicsPeimInit
- <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB.
- Disable: FSP will NOT initialize the framebuffer.
- $EN_DIS
-**/
- UINT8 PeiGraphicsPeimInit;
-
-/** Offset 0x048E - Enable D3 Hot in TCSS
- This policy will enable/disable D3 hot support in IOM
- $EN_DIS
-**/
- UINT8 D3HotEnable;
-
-/** Offset 0x048F - Enable or disable GNA device
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 GnaEnable;
-
-/** Offset 0x0490 - TypeC port GPIO setting
- GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined
- in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Tgl
- = TigerLake)
-**/
- UINT32 IomTypeCPortPadCfg[8];
-
-/** Offset 0x04B0 - CPU USB3 Port Over Current Pin
- Describe the specific over current pin number of USBC Port N.
-**/
- UINT8 CpuUsb3OverCurrentPin[8];
-
-/** Offset 0x04B8 - Enable D3 Cold in TCSS
- This policy will enable/disable D3 cold support in IOM
- $EN_DIS
-**/
- UINT8 D3ColdEnable;
-
-/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4
- Enable/Disable PCIe tunneling for USB4, default is enable
- $EN_DIS
-**/
- UINT8 ITbtPcieTunnelingForUsb4;
-
-/** Offset 0x04BA - Enable/Disable SkipFspGop
- Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver
- $EN_DIS
-**/
- UINT8 SkipFspGop;
-
-/** Offset 0x04BB - TC State in TCSS
- This TC C-State Limit in IOM
-**/
- UINT8 TcCstateLimit;
-
-/** Offset 0x04BC - Disable TC code On USB Connect
- Enable: Unsupported TC cold capability on Usb Connected, Disable(default): Supported
- TC cold On Usb Connected
- $EN_DIS
-**/
- UINT8 DisableTccoldOnUsbConnected;
-
-/** Offset 0x04BD - Set Iom stay in TC cold seconds in TCSS
- Set Iom stay in TC cold seconds in IOM
-**/
- UINT8 IomStayInTCColdeSeconds;
-
-/** Offset 0x04BE - Set Iom before entering TC cold seconds in TCSS
- Set Iom before entering TC cold seconds in IOM
-**/
- UINT8 IomBeforeEnteringTCCodeSeconds;
-
-/** Offset 0x04BF - SaPostMemRsvd
- Reserved for PCH Post-Mem
- $EN_DIS
-**/
- UINT8 SaPostMemRsvd[2];
-
-/** Offset 0x04C1 - Enable VMD controller
- Enable/disable to VMD controller.0: Disable(Default); 1: Enable
- $EN_DIS
-**/
- UINT8 VmdEnable;
-
-/** Offset 0x04C2 - Enable VMD portA Support
- Enable/disable to VMD portA Support.
- $EN_DIS
-**/
- UINT8 VmdPortA;
-
-/** Offset 0x04C3 - Enable VMD portB Support
- Enable/disable to VMD portB Support.
- $EN_DIS
-**/
- UINT8 VmdPortB;
-
-/** Offset 0x04C4 - Enable VMD portC Support
- Enable/disable to VMD portC Support.
- $EN_DIS
-**/
- UINT8 VmdPortC;
-
-/** Offset 0x04C5 - Enable VMD portD Support
- Enable/disable to VMD portD Support.
- $EN_DIS
-**/
- UINT8 VmdPortD;
-
-/** Offset 0x04C6 - VMD Config Bar size
- Set The VMD Config Bar Size.
-**/
- UINT8 VmdCfgBarSize;
-
-/** Offset 0x04C7 - VMD Config Bar Attributes
- 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default)
- 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
-**/
- UINT8 VmdCfgBarAttr;
-
-/** Offset 0x04C8 - VMD Mem Bar1 size
- Set The VMD Mem Bar1 Size.
-**/
- UINT8 VmdMemBarSize1;
-
-/** Offset 0x04C9 - VMD Mem Bar1 Attributes
- 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
- 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
-**/
- UINT8 VmdMemBar1Attr;
-
-/** Offset 0x04CA - VMD Mem Bar2 size
- Set The VMD Mem Bar2 Size.
-**/
- UINT8 VmdMemBarSize2;
-
-/** Offset 0x04CB - VMD Mem Bar2 Attributes
- 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
- 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
-**/
- UINT8 VmdMemBar2Attr;
-
-/** Offset 0x04CC - Enable/Disable PMC-PD Solution
- This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution
- $EN_DIS
-**/
- UINT8 PmcPdEnable;
-
-/** Offset 0x04CD
-**/
- UINT8 UnusedUpdSpace14;
-
-/** Offset 0x04CE - TCSS Aux Orientation Override Enable
- Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
-**/
- UINT16 TcssAuxOri;
-
-/** Offset 0x04D0 - TCSS HSL Orientation Override Enable
- Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
-**/
- UINT16 TcssHslOri;
-
-/** Offset 0x04D2 - USB override in IOM
- This policy will enable/disable USB Connect override in IOM
- $EN_DIS
-**/
- UINT8 UsbOverride;
-
-/** Offset 0x04D3 - TCSS USB Port Enable
- Bits 0, 1, ... max Type C port control enables
-**/
- UINT8 UsbTcPortEn;
-
-/** Offset 0x04D4 - ITBT Root Port Enable
- ITBT Root Port Enable, 0:Disable, 1:Enable
- 0:Disable, 1:Enable
-**/
- UINT8 ITbtPcieRootPortEn[4];
-
-/** Offset 0x04D8 - ITBTForcePowerOn Timeout value
- ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000.
- 100 = 100 ms.
-**/
- UINT16 ITbtForcePowerOnTimeoutInMs;
-
-/** Offset 0x04DA - ITbtConnectTopology Timeout value
- ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range
- is 0-10000. 100 = 100 ms.
-**/
- UINT16 ITbtConnectTopologyTimeoutInMs;
-
-/** Offset 0x04DC - VCCST request for IOM
- This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5
- $EN_DIS
-**/
- UINT8 VccSt;
-
-/** Offset 0x04DD - TCSS Usb3 Compliance Mode Enable
- Used by IOM FW to skip powering down the PHY at the end of disconnect flow
- $EN_DIS
-**/
- UINT8 Usb3ComplModeEnable;
-
-/** Offset 0x04DE - ITBT DMA LTR
- TCSS DMA1, DMA2 LTR value
-**/
- UINT16 ITbtDmaLtr[2];
-
-/** Offset 0x04E2 - Enable/Disable CrashLog
- Deprecated. Move to PreMem
- $EN_DIS
-**/
- UINT8 DeprecatedCpuCrashLogEnable;
-
-/** Offset 0x04E3 - Enable/Disable PTM
- This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports
- $EN_DIS
-**/
- UINT8 PtmEnabled[4];
-
-/** Offset 0x04E7 - PCIE RP Ltr Enable
- Latency Tolerance Reporting Mechanism.
-**/
- UINT8 SaPcieItbtRpLtrEnable[4];
-
-/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode
- Latency Tolerance Reporting, Snoop Latency Override Mode.
-**/
- UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4];
-
-/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Snoop Latency Override Multiplier.
-**/
- UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
-
-/** Offset 0x04F3
-**/
- UINT8 UnusedUpdSpace15[1];
-
-/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value
- Latency Tolerance Reporting, Snoop Latency Override Value.
-**/
- UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4];
-
-/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode
- Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
-**/
- UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4];
-
-/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
-**/
- UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4];
-
-/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value
- Latency Tolerance Reporting, Non-Snoop Latency Override Value.
-**/
- UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4];
-
-/** Offset 0x050C - Force LTR Override
- Force LTR Override.
-**/
- UINT8 SaPcieItbtRpForceLtrOverride[4];
-
-/** Offset 0x0510 - PCIE RP Ltr Config Lock
- 0: Disable; 1: Enable.
-**/
- UINT8 SaPcieItbtRpLtrConfigLock[4];
-
-/** Offset 0x0514 - Advanced Encryption Standard (AES) feature
- Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
- $EN_DIS
-**/
- UINT8 AesEnable;
-
-/** Offset 0x0515 - Power State 3 enable/disable
- PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
- For all VR Indexes
-**/
- UINT8 Psi3Enable[5];
-
-/** Offset 0x051A - Power State 4 enable/disable
- PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
- all VR Indexes
-**/
- UINT8 Psi4Enable[5];
-
-/** Offset 0x051F
-**/
- UINT8 UnusedUpdSpace16[1];
-
-/** Offset 0x0520 - Imon slope correction
- PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
- Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
-**/
- UINT16 ImonSlope[5];
-
-/** Offset 0x052A - Imon offset correction
- PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
- Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
-**/
- UINT16 ImonOffset[5];
-
-/** Offset 0x0534 - Enable/Disable BIOS configuration of VR
- Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
-**/
- UINT8 VrConfigEnable[5];
-
-/** Offset 0x0539 - Thermal Design Current enable/disable
- PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
- Enable.For all VR Indexes
-**/
- UINT8 TdcEnable[5];
-
-/** Offset 0x053E - Thermal Design Current time window
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 -
- 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index
-**/
- UINT8 TdcTimeWindow[5];
-
-/** Offset 0x0543 - Thermal Design Current Lock
- PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
- all VR Indexes
-**/
- UINT8 TdcLock[5];
-
-/** Offset 0x0548 - Platform Psys slope correction
- PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
- 1/100 increment values. Range is 0-200. 125 = 1.25
-**/
- UINT8 PsysSlope;
-
-/** Offset 0x0549
-**/
- UINT8 PsysOffset;
-
-/** Offset 0x054A - Acoustic Noise Mitigation feature
- Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
- $EN_DIS
-**/
- UINT8 AcousticNoiseMitigation;
-
-/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains
- Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
- feature enabled. <b>0: False</b>; 1: True
- $EN_DIS
-**/
- UINT8 FastPkgCRampDisable[5];
-
-/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains
- Slew Rate configuration for Deep Package C States for VR domains based on Acoustic
- Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
- 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
-**/
- UINT8 SlowSlewRate[5];
-
-/** Offset 0x0555 - Enable multi phases silicon initialization
- A switch to determine MultiPhaseSiInit will be executed or not
- $EN_DIS
-**/
- UINT8 EnableMultiPhaseSiliconInit;
-
-/** Offset 0x0556 - Thermal Design Current current limit
- PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
- Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
-**/
- UINT16 TdcCurrentLimit[5];
-
-/** Offset 0x0560 - AcLoadline
- PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
- 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
-**/
- UINT16 AcLoadline[5];
-
-/** Offset 0x056A - DcLoadline
- PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
- 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
-**/
- UINT16 DcLoadline[5];
-
-/** Offset 0x0574 - Power State 1 Threshold current
- PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi1Threshold[5];
-
-/** Offset 0x057E - Power State 2 Threshold current
- PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi2Threshold[5];
-
-/** Offset 0x0588 - Power State 3 Threshold current
- PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi3Threshold[5];
-
-/** Offset 0x0592 - Icc Max limit
- PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
-**/
- UINT16 IccMax[5];
-
-/** Offset 0x059C - VR Voltage Limit
- PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV.
-**/
- UINT16 VrVoltageLimit[5];
-
-/** Offset 0x05A6 - Enable VR specific mailbox command
- VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
- VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
- command sent for PS4 exit issue. 11b - Reserved.
- $EN_DIS
-**/
- UINT8 SendVrMbxCmd;
-
-/** Offset 0x05A7 - Reserved
- Reserved
-**/
- UINT8 Reserved2;
-
-/** Offset 0x05A8 - Enable or Disable TXT
- Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 TxtEnable;
-
-/** Offset 0x05A9 - Skip Multi-Processor Initialization
- When this is skipped, boot loader must initialize processors before SilicionInit
- API. </b>0: Initialize; <b>1: Skip
- $EN_DIS
-**/
- UINT8 SkipMpInit;
-
-/** Offset 0x05AA - FIVR RFI Frequency
- PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
- Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
- 0-1535 (Up to 153.5MHz) for 19MHz clock.
-**/
- UINT16 FivrRfiFrequency;
-
-/** Offset 0x05AC - FIVR RFI Spread Spectrum
- Set the Spread Spectrum Range. <b>1.5%</b>; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%,
- 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1%
- = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44.
-**/
- UINT8 FivrSpreadSpectrum;
-
-/** Offset 0x05AD
-**/
- UINT8 UnusedUpdSpace17[3];
-
-/** Offset 0x05B0 - CpuBistData
- Pointer CPU BIST Data
-**/
- UINT32 CpuBistData;
-
-/** Offset 0x05B4 - CpuMpPpi
- <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI.
- If not NULL, FSP will use the boot loader's implementation of multiprocessing.
- See section 5.1.4 of the FSP Integration Guide for more details.
-**/
- UINT32 CpuMpPpi;
-
-/** Offset 0x05B8 - CpuMpHob
- <b>@deprecated</b> This is not needed in current version of FSP.
-**/
- UINT32 CpuMpHob;
-
-/** Offset 0x05BC - RFI Mitigation
- Enable or Disable RFI Mitigation. <b>0: Disable - DCM is the IO_N default</b>; 1:
- Enable - Enable IO_N DCM/CCM switching as RFI mitigation.
- $EN_DIS
-**/
- UINT8 RfiMitigation;
-
-/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable
- Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; <b> 1: Enable </b>
-**/
- UINT8 FivrSpectrumEnable;
-
-/** Offset 0x05BE - Pre Wake Randomization time
- PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake
- randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
- is enabled. Range 0-255 <b>0</b>.
-**/
- UINT8 PreWake;
-
-/** Offset 0x05BF - Ramp Up Randomization time
- PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up
- randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
- is enabled.Range 0-255 <b>0</b>.
-**/
- UINT8 RampUp;
-
-/** Offset 0x05C0 - Ramp Down Randomization time
- PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down
- randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
- is enabled.Range 0-255 <b>0</b>.
-**/
- UINT8 RampDown;
-
-/** Offset 0x05C1
-**/
- UINT8 CpuPostMemRsvd[11];
-
-/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number
- Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
- flag is set) for PPIN Support
- 0: Disable, 1: Enable, 2: Auto
-**/
- UINT8 PpinSupport;
-
-/** Offset 0x05CD - Enable or Disable Minimum Voltage Override
- Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 EnableMinVoltageOverride;
-
-/** Offset 0x05CE - Min Voltage for Runtime
- PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
- = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
-**/
- UINT16 MinVoltageRuntime;
-
-/** Offset 0x05D0 - Base of memory region allocated for Processor Trace
- Base address of memory region allocated for Processor Trace. Processor Trace requires
- 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
-**/
- UINT64 ProcessorTraceMemBase;
-
-/** Offset 0x05D8 - Memory region allocation for Processor Trace
- Length in bytes of memory region allocated for Processor Trace. Processor Trace
- requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
-**/
- UINT32 ProcessorTraceMemLength;
-
-/** Offset 0x05DC - Min Voltage for C8
- PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
- 1. Range 0 to 1999mV. <b> 0: 0mV </b>
-**/
- UINT16 MinVoltageC8;
-
-/** Offset 0x05DE - Platform Psys offset correction
- PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000,
- Range 0-63999. For an offset of 25.348, enter 25348.
-**/
- UINT16 PsysOffset1;
-
-/** Offset 0x05E0 - Smbios Type4 Max Speed Override
- Provide the option for platform to override the MaxSpeed field of Smbios Type 4.
- If this value is not zero, it dominates the field.
-**/
- UINT16 SmbiosType4MaxSpeedOverride;
-
-/** Offset 0x05E2 - AvxDisable
- Enable or Disable AVX Support.
- 0: Enable, 1: Disable
-**/
- UINT8 AvxDisable;
-
-/** Offset 0x05E3 - Avx3Disable
- Enable or Disable AVX3 Support
- 0: Enable, 1: Disable
-**/
- UINT8 Avx3Disable;
-
-/** Offset 0x05E4 - ReservedCpuPostMemProduction
- Reserved for CPU Post-Mem Production
- $EN_DIS
-**/
- UINT8 ReservedCpuPostMemProduction[4];
-
-/** Offset 0x05E8 - Enable Power Optimizer
- Enable DMI Power Optimizer on PCH side.
- $EN_DIS
-**/
- UINT8 PchPwrOptEnable;
-
-/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble
- Write or erase is blocked by hardware.
-**/
- UINT8 PchWriteProtectionEnable[5];
-
-/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble
- Read is blocked by hardware.
-**/
- UINT8 PchReadProtectionEnable[5];
-
-/** Offset 0x05F3
-**/
- UINT8 UnusedUpdSpace18[1];
-
-/** Offset 0x05F4 - PCH Protect Range Limit
- Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
- limit comparison.
-**/
- UINT16 PchProtectedRangeLimit[5];
-
-/** Offset 0x05FE - PCH Protect Range Base
- Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
-**/
- UINT16 PchProtectedRangeBase[5];
-
-/** Offset 0x0608 - Enable Pme
- Enable Azalia wake-on-ring.
- $EN_DIS
-**/
- UINT8 PchHdaPme;
-
-/** Offset 0x0609 - HD Audio Link Frequency
- HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
- 0: 6MHz, 1: 12MHz, 2: 24MHz
-**/
- UINT8 PchHdaLinkFrequency;
-
-/** Offset 0x060A - PchPostMemRsvd
- Reserved for PCH Post-Mem
- $EN_DIS
-**/
- UINT8 PchPostMemRsvd4[3];
-
-/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned
- Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable.
-**/
- UINT8 PchIshSpiCs0Enable[1];
-
-/** Offset 0x060E - Enable PCH Io Apic Entry 24-119
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIoApicEntry24_119;
-
-/** Offset 0x060F - PCH Io Apic ID
- This member determines IOAPIC ID. Default is 0x02.
-**/
- UINT8 PchIoApicId;
-
-/** Offset 0x0610 - Enable PCH ISH SPI pins assigned
- Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
-**/
- UINT8 PchIshSpiEnable[1];
-
-/** Offset 0x0611 - Enable PCH ISH UART pins assigned
- Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
-**/
- UINT8 PchIshUartEnable[2];
-
-/** Offset 0x0613 - Enable PCH ISH I2C pins assigned
- Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
-**/
- UINT8 PchIshI2cEnable[3];
-
-/** Offset 0x0616 - Enable PCH ISH GP pins assigned
- Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
-**/
- UINT8 PchIshGpEnable[8];
-
-/** Offset 0x061E - PCH ISH PDT Unlock Msg
- 0: False; 1: True.
- $EN_DIS
-**/
- UINT8 PchIshPdtUnlock;
-
-/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchLanLtrEnable;
-
-/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK
- Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
- protection.
- $EN_DIS
-**/
- UINT8 PchLockDownBiosLock;
-
-/** Offset 0x0621 - PCH Compatibility Revision ID
- This member describes whether or not the CRID feature of PCH should be enabled.
- $EN_DIS
-**/
- UINT8 PchCrid;
-
-/** Offset 0x0622 - RTC BIOS Interface Lock
- Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed.
- $EN_DIS
-**/
- UINT8 RtcBiosInterfaceLock;
-
-/** Offset 0x0623 - RTC Cmos Memory Lock
- Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
- and and lower 128-byte bank of RTC RAM.
- $EN_DIS
-**/
- UINT8 RtcMemoryLock;
-
-/** Offset 0x0624 - Enable PCIE RP HotPlug
- Indicate whether the root port is hot plug available.
-**/
- UINT8 PcieRpHotPlug[24];
-
-/** Offset 0x063C - Enable PCIE RP Pm Sci
- Indicate whether the root port power manager SCI is enabled.
-**/
- UINT8 PcieRpPmSci[24];
-
-/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing
- Indicate whether the Transmitter Half Swing is enabled.
-**/
- UINT8 PcieRpTransmitterHalfSwing[24];
-
-/** Offset 0x066C - Enable PCIE RP Clk Req Detect
- Probe CLKREQ# signal before enabling CLKREQ# based power management.
-**/
- UINT8 PcieRpClkReqDetect[24];
-
-/** Offset 0x0684 - PCIE RP Advanced Error Report
- Indicate whether the Advanced Error Reporting is enabled.
-**/
- UINT8 PcieRpAdvancedErrorReporting[24];
-
-/** Offset 0x069C - PCIE RP Unsupported Request Report
- Indicate whether the Unsupported Request Report is enabled.
-**/
- UINT8 PcieRpUnsupportedRequestReport[24];
-
-/** Offset 0x06B4 - PCIE RP Fatal Error Report
- Indicate whether the Fatal Error Report is enabled.
-**/
- UINT8 PcieRpFatalErrorReport[24];
-
-/** Offset 0x06CC - PCIE RP No Fatal Error Report
- Indicate whether the No Fatal Error Report is enabled.
-**/
- UINT8 PcieRpNoFatalErrorReport[24];
-
-/** Offset 0x06E4 - PCIE RP Correctable Error Report
- Indicate whether the Correctable Error Report is enabled.
-**/
- UINT8 PcieRpCorrectableErrorReport[24];
-
-/** Offset 0x06FC - PCIE RP System Error On Fatal Error
- Indicate whether the System Error on Fatal Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnFatalError[24];
-
-/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error
- Indicate whether the System Error on Non Fatal Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnNonFatalError[24];
-
-/** Offset 0x072C - PCIE RP System Error On Correctable Error
- Indicate whether the System Error on Correctable Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnCorrectableError[24];
-
-/** Offset 0x0744 - PCIE RP Max Payload
- Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
-**/
- UINT8 PcieRpMaxPayload[24];
-
-/** Offset 0x075C - Touch Host Controller Port 0 Assignment
- Assign THC Port 0
- 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0
-**/
- UINT8 ThcPort0Assignment;
-
-/** Offset 0x075D
-**/
- UINT8 UnusedUpdSpace19[3];
-
-/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux
- Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer
- to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
-**/
- UINT32 ThcPort0InterruptPinMuxing;
-
-/** Offset 0x0764 - Touch Host Controller Port 1 Assignment
- Assign THC Port 1
- 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1
-**/
- UINT8 ThcPort1Assignment;
-
-/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency
- Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
- 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
-**/
- UINT8 ThcPort1ReadFrequency;
-
-/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency
- Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
- 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
-**/
- UINT8 ThcPort1WriteFrequency;
-
-/** Offset 0x0767
-**/
- UINT8 UnusedUpdSpace20;
-
-/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux
- Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer
- to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
-**/
- UINT32 ThcPort1InterruptPinMuxing;
-
-/** Offset 0x076C - PCIE RP Pcie Speed
- Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
- PCIE_SPEED).
-**/
- UINT8 PcieRpPcieSpeed[24];
-
-/** Offset 0x0784 - PCIE RP Physical Slot Number
- Indicates the slot number for the root port. Default is the value as root port index.
-**/
- UINT8 PcieRpPhysicalSlotNumber[24];
-
-/** Offset 0x079C - PCIE RP Completion Timeout
- The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default.
-**/
- UINT8 PcieRpCompletionTimeout[24];
-
-/** Offset 0x07B4 - PCIE RP Aspm
- The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
- PchPcieAspmAutoConfig.
-**/
- UINT8 PcieRpAspm[24];
-
-/** Offset 0x07CC - PCIE RP L1 Substates
- The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
- Default is PchPcieL1SubstatesL1_1_2.
-**/
- UINT8 PcieRpL1Substates[24];
-
-/** Offset 0x07E4 - PCIE RP Ltr Enable
- Latency Tolerance Reporting Mechanism.
-**/
- UINT8 PcieRpLtrEnable[24];
-
-/** Offset 0x07FC - PCIE RP Ltr Config Lock
- 0: Disable; 1: Enable.
-**/
- UINT8 PcieRpLtrConfigLock[24];
-
-/** Offset 0x0814 - PCIe override default settings for EQ
- Choose PCIe EQ method
- $EN_DIS
-**/
- UINT8 PcieEqOverrideDefault;
-
-/** Offset 0x0815 - PCIe choose EQ method
- Choose PCIe EQ method
- 0: HardwareEq, 1: FixedEq
-**/
- UINT8 PcieEqMethod;
-
-/** Offset 0x0816 - PCIe choose EQ mode
- Choose PCIe EQ mode
- 0: PresetEq, 1: CoefficientEq
-**/
- UINT8 PcieEqMode;
-
-/** Offset 0x0817 - PCIe EQ local transmitter override
- Enable/Disable local transmitter override
- $EN_DIS
-**/
- UINT8 PcieEqLocalTransmitterOverrideEnable;
-
-/** Offset 0x0818 - PCIe number of valid list entries
- Select number of presets or coefficients depending on the mode
-**/
- UINT8 PcieEqPh3NumberOfPresetsOrCoefficients;
-
-/** Offset 0x0819 - PCIe pre-cursor coefficient list
- Provide a list of pre-cursor coefficients to be used during phase 3 EQ
-**/
- UINT8 PcieEqPh3PreCursorList[10];
-
-/** Offset 0x0823 - PCIe post-cursor coefficient list
- Provide a list of post-cursor coefficients to be used during phase 3 EQ
-**/
- UINT8 PcieEqPh3PostCursorList[10];
-
-/** Offset 0x082D - PCIe preset list
- Provide a list of presets to be used during phase 3 EQ
-**/
- UINT8 PcieEqPh3PresetList[11];
-
-/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset
- Allows to select the downstream port preset value that will be used during phase
- 1 of equalization
-**/
- UINT32 PcieEqPh1DownstreamPortTransmitterPreset;
-
-/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset
- Allows to select the upstream port preset value that will be used during phase 1
- of equalization
-**/
- UINT32 PcieEqPh1UpstreamPortTransmitterPreset;
-
-/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset
- Allows to select the value of the preset used during phase 2 local transmitter override
-**/
- UINT8 PcieEqPh2LocalTransmitterOverridePreset;
-
-/** Offset 0x0841 - PCIE Enable Peer Memory Write
- This member describes whether Peer Memory Writes are enabled on the platform.
- $EN_DIS
-**/
- UINT8 PcieEnablePeerMemoryWrite;
-
-/** Offset 0x0842 - PCIE Compliance Test Mode
- Compliance Test Mode shall be enabled when using Compliance Load Board.
- $EN_DIS
-**/
- UINT8 PcieComplianceTestMode;
-
-/** Offset 0x0843 - PCIE Rp Function Swap
- Allows BIOS to use root port function number swapping when root port of function
- 0 is disabled.
- $EN_DIS
-**/
- UINT8 PcieRpFunctionSwap;
-
-/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming
- Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
- Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
- $EN_DIS
-**/
- UINT8 CpuPcieGen3ProgramStaticEq;
-
-/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming
- Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
- Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
- $EN_DIS
-**/
- UINT8 CpuPcieGen4ProgramStaticEq;
-
-/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS
- When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
- $EN_DIS
-**/
- UINT8 PchPmPmeB0S5Dis;
-
-/** Offset 0x0847 - PCIE IMR
- Enables Isolated Memory Region for PCIe.
- $EN_DIS
-**/
- UINT8 PcieRpImrEnabled;
-
-/** Offset 0x0848 - PCIE IMR port number
- Selects PCIE root port number for IMR feature.
-**/
- UINT8 PcieRpImrSelection;
-
-/** Offset 0x0849 - PCH Pm Wol Enable Override
- Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
- $EN_DIS
-**/
- UINT8 PchPmWolEnableOverride;
-
-/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx
- Determine if enable PCIe to wake from deep Sx.
- $EN_DIS
-**/
- UINT8 PchPmPcieWakeFromDeepSx;
-
-/** Offset 0x084B - PCH Pm WoW lan Enable
- Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
- $EN_DIS
-**/
- UINT8 PchPmWoWlanEnable;
-
-/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable
- Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
- PWRM_CFG3 register.
- $EN_DIS
-**/
- UINT8 PchPmWoWlanDeepSxEnable;
-
-/** Offset 0x084D - PCH Pm Lan Wake From DeepSx
- Determine if enable LAN to wake from deep Sx.
- $EN_DIS
-**/
- UINT8 PchPmLanWakeFromDeepSx;
-
-/** Offset 0x084E - PCH Pm Deep Sx Pol
- Deep Sx Policy.
- $EN_DIS
-**/
- UINT8 PchPmDeepSxPol;
-
-/** Offset 0x084F - PCH Pm Slp S3 Min Assert
- SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
-**/
- UINT8 PchPmSlpS3MinAssert;
-
-/** Offset 0x0850 - PCH Pm Slp S4 Min Assert
- SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
-**/
- UINT8 PchPmSlpS4MinAssert;
-
-/** Offset 0x0851 - PCH Pm Slp Sus Min Assert
- SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
-**/
- UINT8 PchPmSlpSusMinAssert;
-
-/** Offset 0x0852 - PCH Pm Slp A Min Assert
- SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
-**/
- UINT8 PchPmSlpAMinAssert;
-
-/** Offset 0x0853 - USB Overcurrent Override for DbC
- This option overrides USB Over Current enablement state that USB OC will be disabled
- after enabling this option. Enable when DbC is used to avoid signaling conflicts.
- $EN_DIS
-**/
- UINT8 PchEnableDbcObs;
-
-/** Offset 0x0854 - PCH Pm Slp Strch Sus Up
- Enable SLP_X Stretching After SUS Well Power Up.
- $EN_DIS
-**/
- UINT8 PchPmSlpStrchSusUp;
-
-/** Offset 0x0855 - PCH Pm Slp Lan Low Dc
- Enable/Disable SLP_LAN# Low on DC Power.
- $EN_DIS
-**/
- UINT8 PchPmSlpLanLowDc;
-
-/** Offset 0x0856 - PCH Pm Pwr Btn Override Period
- PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
-**/
- UINT8 PchPmPwrBtnOverridePeriod;
-
-/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown
- When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
- $EN_DIS
-**/
- UINT8 PchPmDisableDsxAcPresentPulldown;
-
-/** Offset 0x0858 - PCH Pm Disable Native Power Button
- Power button native mode disable.
- $EN_DIS
-**/
- UINT8 PchPmDisableNativePowerButton;
-
-/** Offset 0x0859 - PCH Pm ME_WAKE_STS
- Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
- $EN_DIS
-**/
- UINT8 PchPmMeWakeSts;
-
-/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS
- Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
- $EN_DIS
-**/
- UINT8 PchPmWolOvrWkSts;
-
-/** Offset 0x085B - PCH Pm Reset Power Cycle Duration
- Could be customized in the unit of second. Please refer to EDS for all support settings.
- 0 is default, 1 is 1 second, 2 is 2 seconds, ...
-**/
- UINT8 PchPmPwrCycDur;
-
-/** Offset 0x085C - PCH Pm Pcie Pll Ssc
- Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
- BIOS override.
-**/
- UINT8 PchPmPciePllSsc;
-
-/** Offset 0x085D - PCH Legacy IO Low Latency Enable
- Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable
- $EN_DIS
-**/
- UINT8 PchLegacyIoLowLatency;
-
-/** Offset 0x085E - PCH Sata Pwr Opt Enable
- SATA Power Optimizer on PCH side.
- $EN_DIS
-**/
- UINT8 SataPwrOptEnable;
-
-/** Offset 0x085F - PCH Sata eSATA Speed Limit
- When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
- $EN_DIS
-**/
- UINT8 EsataSpeedLimit;
-
-/** Offset 0x0860 - PCH Sata Speed Limit
- Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
-**/
- UINT8 SataSpeedLimit;
-
-/** Offset 0x0861 - Enable SATA Port HotPlug
- Enable SATA Port HotPlug.
-**/
- UINT8 SataPortsHotPlug[8];
-
-/** Offset 0x0869 - Enable SATA Port Interlock Sw
- Enable SATA Port Interlock Sw.
-**/
- UINT8 SataPortsInterlockSw[8];
-
-/** Offset 0x0871 - Enable SATA Port External
- Enable SATA Port External.
-**/
- UINT8 SataPortsExternal[8];
-
-/** Offset 0x0879 - Enable SATA Port SpinUp
- Enable the COMRESET initialization Sequence to the device.
-**/
- UINT8 SataPortsSpinUp[8];
-
-/** Offset 0x0881 - Enable SATA Port Solid State Drive
- 0: HDD; 1: SSD.
-**/
- UINT8 SataPortsSolidStateDrive[8];
-
-/** Offset 0x0889 - Enable SATA Port Enable Dito Config
- Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
-**/
- UINT8 SataPortsEnableDitoConfig[8];
-
-/** Offset 0x0891 - Enable SATA Port DmVal
- DITO multiplier. Default is 15.
-**/
- UINT8 SataPortsDmVal[8];
-
-/** Offset 0x0899
-**/
- UINT8 UnusedUpdSpace21[1];
-
-/** Offset 0x089A - Enable SATA Port DmVal
- DEVSLP Idle Timeout (DITO), Default is 625.
-**/
- UINT16 SataPortsDitoVal[8];
-
-/** Offset 0x08AA - Enable SATA Port ZpOdd
- Support zero power ODD.
-**/
- UINT8 SataPortsZpOdd[8];
-
-/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id
- Enable RAID Alternate ID.
- $EN_DIS
-**/
- UINT8 SataRstRaidDeviceId;
-
-/** Offset 0x08B3 - PCH Sata Rst Raid0
- RAID0.
- $EN_DIS
-**/
- UINT8 SataRstRaid0;
-
-/** Offset 0x08B4 - PCH Sata Rst Raid1
- RAID1.
- $EN_DIS
-**/
- UINT8 SataRstRaid1;
-
-/** Offset 0x08B5 - PCH Sata Rst Raid10
- RAID10.
- $EN_DIS
-**/
- UINT8 SataRstRaid10;
-
-/** Offset 0x08B6 - PCH Sata Rst Raid5
- RAID5.
- $EN_DIS
-**/
- UINT8 SataRstRaid5;
-
-/** Offset 0x08B7 - PCH Sata Rst Irrt
- Intel Rapid Recovery Technology.
- $EN_DIS
-**/
- UINT8 SataRstIrrt;
-
-/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner
- OROM UI and BANNER.
- $EN_DIS
-**/
- UINT8 SataRstOromUiBanner;
-
-/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay
- 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
-**/
- UINT8 SataRstOromUiDelay;
-
-/** Offset 0x08BA - PCH Sata Rst Hdd Unlock
- Indicates that the HDD password unlock in the OS is enabled.
- $EN_DIS
-**/
- UINT8 SataRstHddUnlock;
-
-/** Offset 0x08BB - PCH Sata Rst Led Locate
- Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
- enabled on the OS.
- $EN_DIS
-**/
- UINT8 SataRstLedLocate;
-
-/** Offset 0x08BC - PCH Sata Rst Irrt Only
- Allow only IRRT drives to span internal and external ports.
- $EN_DIS
-**/
- UINT8 SataRstIrrtOnly;
-
-/** Offset 0x08BD - PCH Sata Rst Smart Storage
- RST Smart Storage caching Bit.
- $EN_DIS
-**/
- UINT8 SataRstSmartStorage;
-
-/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable
- Enable Intel RST for PCIe Storage remapping.
-**/
- UINT8 SataRstPcieEnable[3];
-
-/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port
- Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
-**/
- UINT8 SataRstPcieStoragePort[3];
-
-/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay
- PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
-**/
- UINT8 SataRstPcieDeviceResetDelay[3];
-
-/** Offset 0x08C7 - UFS enable/disable
- PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
- $EN_DIS
-**/
- UINT8 UfsEnable[2];
-
-/** Offset 0x08C9 - IEH Mode
- Integrated Error Handler Mode, 0: Bypass, 1: Enable
- 0: Bypass, 1:Enable
-**/
- UINT8 IehMode;
-
-/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value
- Custimized T0Level value.
-**/
- UINT16 PchT0Level;
-
-/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value
- Custimized T1Level value.
-**/
- UINT16 PchT1Level;
-
-/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value
- Custimized T2Level value.
-**/
- UINT16 PchT2Level;
-
-/** Offset 0x08D0 - Enable The Thermal Throttle
- Enable the thermal throttle function.
- $EN_DIS
-**/
- UINT8 PchTTEnable;
-
-/** Offset 0x08D1 - PMSync State 13
- When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
- at least T2 state.
- $EN_DIS
-**/
- UINT8 PchTTState13Enable;
-
-/** Offset 0x08D2 - Thermal Throttle Lock
- Thermal Throttle Lock.
- $EN_DIS
-**/
- UINT8 PchTTLock;
-
-/** Offset 0x08D3 - Thermal Throttling Suggested Setting
- Thermal Throttling Suggested Setting.
- $EN_DIS
-**/
- UINT8 TTSuggestedSetting;
-
-/** Offset 0x08D4 - Enable PCH Cross Throttling
- Enable/Disable PCH Cross Throttling
- $EN_DIS
-**/
- UINT8 TTCrossThrottling;
-
-/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable
- DMI Thermal Sensor Autonomous Width Enable.
- $EN_DIS
-**/
- UINT8 PchDmiTsawEn;
-
-/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting
- DMT thermal sensor suggested representative values.
- $EN_DIS
-**/
- UINT8 DmiSuggestedSetting;
-
-/** Offset 0x08D7 - Thermal Sensor 0 Target Width
- Thermal Sensor 0 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS0TW;
-
-/** Offset 0x08D8 - Thermal Sensor 1 Target Width
- Thermal Sensor 1 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS1TW;
-
-/** Offset 0x08D9 - Thermal Sensor 2 Target Width
- Thermal Sensor 2 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS2TW;
-
-/** Offset 0x08DA - Thermal Sensor 3 Target Width
- Thermal Sensor 3 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS3TW;
-
-/** Offset 0x08DB - Port 0 T1 Multipler
- Port 0 T1 Multipler.
-**/
- UINT8 SataP0T1M;
-
-/** Offset 0x08DC - Port 0 T2 Multipler
- Port 0 T2 Multipler.
-**/
- UINT8 SataP0T2M;
-
-/** Offset 0x08DD - Port 0 T3 Multipler
- Port 0 T3 Multipler.
-**/
- UINT8 SataP0T3M;
-
-/** Offset 0x08DE - Port 0 Tdispatch
- Port 0 Tdispatch.
-**/
- UINT8 SataP0TDisp;
-
-/** Offset 0x08DF - Port 1 T1 Multipler
- Port 1 T1 Multipler.
-**/
- UINT8 SataP1T1M;
-
-/** Offset 0x08E0 - Port 1 T2 Multipler
- Port 1 T2 Multipler.
-**/
- UINT8 SataP1T2M;
-
-/** Offset 0x08E1 - Port 1 T3 Multipler
- Port 1 T3 Multipler.
-**/
- UINT8 SataP1T3M;
-
-/** Offset 0x08E2 - Port 1 Tdispatch
- Port 1 Tdispatch.
-**/
- UINT8 SataP1TDisp;
-
-/** Offset 0x08E3 - Port 0 Tinactive
- Port 0 Tinactive.
-**/
- UINT8 SataP0Tinact;
-
-/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch
- Port 0 Alternate Fast Init Tdispatch.
- $EN_DIS
-**/
- UINT8 SataP0TDispFinit;
-
-/** Offset 0x08E5 - Port 1 Tinactive
- Port 1 Tinactive.
-**/
- UINT8 SataP1Tinact;
-
-/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch
- Port 1 Alternate Fast Init Tdispatch.
- $EN_DIS
-**/
- UINT8 SataP1TDispFinit;
-
-/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting
- Sata Thermal Throttling Suggested Setting.
- $EN_DIS
-**/
- UINT8 SataThermalSuggestedSetting;
-
-/** Offset 0x08E8 - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
- $EN_DIS
-**/
- UINT8 PchMemoryThrottlingEnable;
-
-/** Offset 0x08E9 - Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryPmsyncEnable[2];
-
-/** Offset 0x08EB - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryC0TransmitEnable[2];
-
-/** Offset 0x08ED - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryPinSelection[2];
-
-/** Offset 0x08EF
-**/
- UINT8 UnusedUpdSpace22;
-
-/** Offset 0x08F0 - Thermal Device Temperature
- Decides the temperature.
-**/
- UINT16 PchTemperatureHotLevel;
-
-/** Offset 0x08F2 - USB2 Port Over Current Pin
- Describe the specific over current pin number of USB 2.0 Port N.
-**/
- UINT8 Usb2OverCurrentPin[16];
-
-/** Offset 0x0902 - USB3 Port Over Current Pin
- Describe the specific over current pin number of USB 3.0 Port N.
-**/
- UINT8 Usb3OverCurrentPin[10];
-
-/** Offset 0x090C - Enable xHCI LTR override
- Enables override of recommended LTR values for xHCI
- $EN_DIS
-**/
- UINT8 PchUsbLtrOverrideEnable;
-
-/** Offset 0x090D
-**/
- UINT8 UnusedUpdSpace23[3];
-
-/** Offset 0x0910 - xHCI High Idle Time LTR override
- Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
-**/
- UINT32 PchUsbLtrHighIdleTimeOverride;
-
-/** Offset 0x0914 - xHCI Medium Idle Time LTR override
- Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting
-**/
- UINT32 PchUsbLtrMediumIdleTimeOverride;
-
-/** Offset 0x0918 - xHCI Low Idle Time LTR override
- Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting
-**/
- UINT32 PchUsbLtrLowIdleTimeOverride;
-
-/** Offset 0x091C - Enable 8254 Static Clock Gating
- Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
- might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
- legacy OS using 8254 timer. Also enable this while S0ix is enabled.
- $EN_DIS
-**/
- UINT8 Enable8254ClockGating;
-
-/** Offset 0x091D - Enable 8254 Static Clock Gating On S3
- This is only applicable when Enable8254ClockGating is disabled. FSP will do the
- 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
- avoids the SMI requirement for the programming.
- $EN_DIS
-**/
- UINT8 Enable8254ClockGatingOnS3;
-
-/** Offset 0x091E - PCH Sata Rst Optane Memory
- Optane Memory
- $EN_DIS
-**/
- UINT8 SataRstOptaneMemory;
-
-/** Offset 0x091F - PCH Sata Rst CPU Attached Storage
- CPU Attached Storage
- $EN_DIS
-**/
- UINT8 SataRstCpuAttachedStorage;
-
-/** Offset 0x0920 - Enable TCO timer.
- When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
- huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
- emulation must be enabled, and WDAT table must not be exposed to the OS.
- $EN_DIS
-**/
- UINT8 EnableTcoTimer;
-
-/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode
- Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration.
- Default is 0: Disabled
- 0: Disabled, 1: Dynamic Configuration
-**/
- UINT8 HybridStorageMode;
-
-/** Offset 0x0922
-**/
- UINT8 UnusedUpdSpace24[6];
-
-/** Offset 0x0928 - BgpdtHash[4]
- BgpdtHash values
-**/
- UINT64 BgpdtHash[4];
-
-/** Offset 0x0948 - BiosGuardAttr
- BiosGuardAttr default values
-**/
- UINT32 BiosGuardAttr;
-
-/** Offset 0x094C
-**/
- UINT8 UnusedUpdSpace25[4];
-
-/** Offset 0x0950 - BiosGuardModulePtr
- BiosGuardModulePtr default values
-**/
- UINT64 BiosGuardModulePtr;
-
-/** Offset 0x0958 - SendEcCmd
- SendEcCmd function pointer. \n
- @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
- EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
-**/
- UINT64 SendEcCmd;
-
-/** Offset 0x0960 - EcCmdProvisionEav
- Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
-**/
- UINT8 EcCmdProvisionEav;
-
-/** Offset 0x0961 - EcCmdLock
- EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
-**/
- UINT8 EcCmdLock;
-
-/** Offset 0x0962
-**/
- UINT8 UnusedUpdSpace26[6];
-
-/** Offset 0x0968 - SgxEpoch0
- SgxEpoch0 default values
-**/
- UINT64 SgxEpoch0;
-
-/** Offset 0x0970 - SgxEpoch1
- SgxEpoch1 default values
-**/
- UINT64 SgxEpoch1;
-
-/** Offset 0x0978 - SgxSinitNvsData
- SgxSinitNvsData default values
-**/
- UINT8 SgxSinitNvsData;
-
-/** Offset 0x0979 - Si Config CSM Flag.
- <b>@deprecated</b> Platform specific common policies that used by several silicon
- components. CSM status flag.
- $EN_DIS
-**/
- UINT8 SiCsmFlag;
-
-/** Offset 0x097A - Skip Ssid Programming.
- When set to TRUE, silicon code will not do any SSID programming and platform code
- needs to handle that by itself properly.
- $EN_DIS
-**/
- UINT8 SiSkipSsidProgramming;
-
-/** Offset 0x097B
-**/
- UINT8 UnusedUpdSpace27;
-
-/** Offset 0x097C - Change Default SVID
- Change the default SVID used in FSP to programming internal devices. This is only
- valid when SkipSsidProgramming is FALSE.
-**/
- UINT16 SiCustomizedSvid;
-
-/** Offset 0x097E - Change Default SSID
- Change the default SSID used in FSP to programming internal devices. This is only
- valid when SkipSsidProgramming is FALSE.
-**/
- UINT16 SiCustomizedSsid;
-
-/** Offset 0x0980 - SVID SDID table Poniter.
- The address of the table of SVID SDID to customize each SVID SDID entry. This is
- only valid when SkipSsidProgramming is FALSE.
-**/
- UINT32 SiSsidTablePtr;
-
-/** Offset 0x0984 - Number of ssid table.
- SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
- This is only valid when SkipSsidProgramming is FALSE.
-**/
- UINT16 SiNumberOfSsidTableEntry;
-
-/** Offset 0x0986 - USB2 Port Reset Message Enable
- 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message
-**/
- UINT8 PortResetMessageEnable[16];
-
-/** Offset 0x0996 - SATA RST Interrupt Mode
- Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
- 0:Msix, 1:Msi, 2:Legacy
-**/
- UINT8 SataRstInterrupt;
-
-/** Offset 0x0997 - ME Unconfig on RTC clear
- 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
- 2: Cmos is clear, status unkonwn. 3: Reserved
- 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
- is clear, 3: Reserved
-**/
- UINT8 MeUnconfigOnRtcClear;
-
-/** Offset 0x0998 - Enable PS_ON.
- PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
- target that will be required by the California Energy Commission (CEC). When FALSE,
- PS_ON is to be disabled.
- $EN_DIS
-**/
- UINT8 PsOnEnable;
-
-/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable
- Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
- and VccSTG rails instead of SLP_S0# pin.
- $EN_DIS
-**/
- UINT8 PmcCpuC10GatePinEnable;
-
-/** Offset 0x099A - Pch Dmi Aspm Ctrl
- ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
- 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
-**/
- UINT8 PchDmiAspmCtrl;
-
-/** Offset 0x099B - PchDmiCwbEnable
- Central Write Buffer feature configurable and enabled by default
- $EN_DIS
-**/
- UINT8 PchDmiCwbEnable;
-
-/** Offset 0x099C - OS IDLE Mode Enable
- Enable/Disable OS Idle Mode
- $EN_DIS
-**/
- UINT8 PmcOsIdleEnable;
-
-/** Offset 0x099D - S0ix Auto-Demotion
- Enable/Disable the Low Power Mode Auto-Demotion Host Control feature.
- $EN_DIS
-**/
- UINT8 PchS0ixAutoDemotion;
-
-/** Offset 0x099E - Latch Events C10 Exit
- When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are
- captured on C10 exit (instead of C10 entry which is default)
- $EN_DIS
-**/
- UINT8 PchPmLatchEventsC10Exit;
-
-/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm
- CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1.
-**/
- UINT8 CpuPcieEqPh3LaneParamCm[32];
-
-/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp
- CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1.
-**/
- UINT8 CpuPcieEqPh3LaneParamCp[32];
-
-/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm
- CPU_PCIE_EQ_PARAM. Coefficient C-1.
-**/
- UINT8 CpuPcieHwEqGen3CoeffListCm[5];
-
-/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp
- CPU_PCIE_EQ_PARAM. Coefficient C+1.
-**/
- UINT8 CpuPcieHwEqGen3CoeffListCp[5];
-
-/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm
- CPU_PCIE_EQ_PARAM. Coefficient C-1.
-**/
- UINT8 CpuPcieHwEqGen4CoeffListCm[5];
-
-/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp
- CPU_PCIE_EQ_PARAM. Coefficient C+1.
-**/
- UINT8 CpuPcieHwEqGen4CoeffListCp[5];
-
-/** Offset 0x09F3 - Gen3 Root port preset values per lane
- Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default
- for each lane
-**/
- UINT8 CpuPcieGen3RootPortPreset[20];
-
-/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane
- Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default
- for each lane
-**/
- UINT8 CpuPcieGen4RootPortPreset[20];
-
-/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane
- Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default
- for each lane
-**/
- UINT8 CpuPcieGen3EndPointPreset[20];
-
-/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane
- Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default
- for each lane
-**/
- UINT8 CpuPcieGen4EndPointPreset[20];
-
-/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane
- Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
-**/
- UINT8 CpuPcieGen3EndPointHint[20];
-
-/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane
- Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane
-**/
- UINT8 CpuPcieGen4EndPointHint[20];
-
-/** Offset 0x0A6B - CPU PCIe Fia Programming
- Load Fia configuration if enable. 0: Disable; 1: Enable(Default).
- $EN_DIS
-**/
- UINT8 CpuPcieFiaProgramming;
-
-/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating
- Describes whether the PCI Express Clock Gating for each root port is enabled by
- platform modules. 0: Disable; 1: Enable(Default).
- $EN_DIS
-**/
- UINT8 CpuPcieClockGating;
-
-/** Offset 0x0A6D - CPU PCIe RootPort Power Gating
- Describes whether the PCI Express Power Gating for each root port is enabled by
- platform modules. 0: Disable; 1: Enable(Default).
- $EN_DIS
-**/
- UINT8 CpuPciePowerGating;
-
-/** Offset 0x0A6E - PCIE Compliance Test Mode
- Compliance Test Mode shall be enabled when using Compliance Load Board.
- $EN_DIS
-**/
- UINT8 CpuPcieComplianceTestMode;
-
-/** Offset 0x0A6F - PCIE Secure Register Lock
- Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled,
- load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable
- $EN_DIS
-**/
- UINT8 CpuPcieSetSecuredRegisterLock;
-
-/** Offset 0x0A70 - PCIE Enable Peer Memory Write
- This member describes whether Peer Memory Writes are enabled on the platform.
- $EN_DIS
-**/
- UINT8 CpuPcieEnablePeerMemoryWrite;
-
-/** Offset 0x0A71 - PCIE Rp Function Swap
- Allows BIOS to use root port function number swapping when root port of function
- 0 is disabled.
- $EN_DIS
-**/
- UINT8 CpuPcieRpFunctionSwap;
-
-/** Offset 0x0A72 - PCI Express Slot Selection
- Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default).
- $EN_DIS
-**/
- UINT8 CpuPcieSlotSelection;
-
-/** Offset 0x0A73
-**/
- UINT8 UnusedUpdSpace28;
-
-/** Offset 0x0A74 - CPU PCIE device override table pointer
- The PCIe device table is being used to override PCIe device ASPM settings. This
- is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
- refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
- must be 0.
-**/
- UINT32 CpuPcieDeviceOverrideTablePtr;
-
-/** Offset 0x0A78 - Enable PCIE RP HotPlug
- Indicate whether the root port is hot plug available.
-**/
- UINT8 CpuPcieRpHotPlug[4];
-
-/** Offset 0x0A7C - Enable PCIE RP Pm Sci
- Indicate whether the root port power manager SCI is enabled.
-**/
- UINT8 CpuPcieRpPmSci[4];
-
-/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing
- Indicate whether the Transmitter Half Swing is enabled.
-**/
- UINT8 CpuPcieRpTransmitterHalfSwing[4];
-
-/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability
- Enable/Disable PCIE RP Access Control Services Extended Capability
-**/
- UINT8 CpuPcieRpAcsEnabled[4];
-
-/** Offset 0x0A88 - PCIE RP Clock Power Management
- Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
- can still be controlled by L1 PM substates mechanism
-**/
- UINT8 CpuPcieRpEnableCpm[4];
-
-/** Offset 0x0A8C - PCIE RP Advanced Error Report
- Indicate whether the Advanced Error Reporting is enabled.
-**/
- UINT8 CpuPcieRpAdvancedErrorReporting[4];
-
-/** Offset 0x0A90 - PCIE RP Unsupported Request Report
- Indicate whether the Unsupported Request Report is enabled.
-**/
- UINT8 CpuPcieRpUnsupportedRequestReport[4];
-
-/** Offset 0x0A94 - PCIE RP Fatal Error Report
- Indicate whether the Fatal Error Report is enabled.
-**/
- UINT8 CpuPcieRpFatalErrorReport[4];
-
-/** Offset 0x0A98 - PCIE RP No Fatal Error Report
- Indicate whether the No Fatal Error Report is enabled.
-**/
- UINT8 CpuPcieRpNoFatalErrorReport[4];
-
-/** Offset 0x0A9C - PCIE RP Correctable Error Report
- Indicate whether the Correctable Error Report is enabled.
-**/
- UINT8 CpuPcieRpCorrectableErrorReport[4];
-
-/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error
- Indicate whether the System Error on Fatal Error is enabled.
-**/
- UINT8 CpuPcieRpSystemErrorOnFatalError[4];
-
-/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error
- Indicate whether the System Error on Non Fatal Error is enabled.
-**/
- UINT8 CpuPcieRpSystemErrorOnNonFatalError[4];
-
-/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error
- Indicate whether the System Error on Correctable Error is enabled.
-**/
- UINT8 CpuPcieRpSystemErrorOnCorrectableError[4];
-
-/** Offset 0x0AAC - PCIE RP Max Payload
- Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD.
-**/
- UINT8 CpuPcieRpMaxPayload[4];
-
-/** Offset 0x0AB0 - DPC for PCIE RP Mask
- Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
- One bit for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT8 CpuPcieRpDpcEnabled[4];
-
-/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask
- Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
- for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT8 CpuPcieRpDpcExtensionsEnabled[4];
-
-/** Offset 0x0AB8 - CPU PCIe root port connection type
- 0: built-in device, 1:slot
-**/
- UINT8 CpuPcieRpSlotImplemented[4];
-
-/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method
- PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
- 1: hardware equalization; 4: Fixed Coeficients.
-**/
- UINT8 CpuPcieRpGen3EqPh3Method[4];
-
-/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method
- PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
- 1: hardware equalization; 4: Fixed Coeficients.
-**/
- UINT8 CpuPcieRpGen4EqPh3Method[4];
-
-/** Offset 0x0AC4 - PCIE RP Physical Slot Number
- Indicates the slot number for the root port. Default is the value as root port index.
-**/
- UINT8 CpuPcieRpPhysicalSlotNumber[4];
-
-/** Offset 0x0AC8 - PCIE RP Aspm
- The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable;
- 2: CpuPcieAspmL1(Default)
-**/
- UINT8 CpuPcieRpAspm[4];
-
-/** Offset 0x0ACC - PCIE RP L1 Substates
- The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL).
- Default is CpuPcieL1SubstatesL1_1_2.
-**/
- UINT8 CpuPcieRpL1Substates[4];
-
-/** Offset 0x0AD0 - PCIE RP Ltr Enable
- Latency Tolerance Reporting Mechanism.
-**/
- UINT8 CpuPcieRpLtrEnable[4];
-
-/** Offset 0x0AD4 - PCIE RP Ltr Config Lock
- 0: Disable; 1: Enable.
-**/
- UINT8 CpuPcieRpLtrConfigLock[4];
-
-/** Offset 0x0AD8 - RpPtmBytes
-**/
- UINT8 RpPtmBytes[4];
-
-/** Offset 0x0ADC - PCIE RP Detect Timeout Ms
- The number of milliseconds within 0~65535 in reference code will wait for link to
- exit Detect state for enabled ports before assuming there is no device and potentially
- disabling the port.
-**/
- UINT16 CpuPcieRpDetectTimeoutMs[4];
-
-/** Offset 0x0AE4 - VC for PCIE RP Mask
- Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit
- for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT8 CpuPcieRpVcEnabled[4];
-
-/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask
- Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable.
- One bit for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT8 CpuPcieRpMultiVcEnabled[4];
-
-/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
- Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
- value in array can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate3UniqTranEnable[10];
-
-/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3
- USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default
- = 4Ch</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate3UniqTran[10];
-
-/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2
- Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each
- value in array can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate2UniqTranEnable[10];
-
-/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2
- USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8],
- <b>Default = 4Ch</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate2UniqTran[10];
-
-/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1
- Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each
- value in array can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate1UniqTranEnable[10];
-
-/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1
- USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16],
- <b>Default = 4Ch</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate1UniqTran[10];
-
-/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0
- Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each
- value in array can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate0UniqTranEnable[10];
-
-/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0
- USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24],
- <b>Default = 4Ch</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxRate0UniqTran[10];
-
-/** Offset 0x0B3C - Skip PAM regsiter lock
- Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
- PAM registers will be locked by RC
- $EN_DIS
-**/
- UINT8 SkipPamLock;
-
-/** Offset 0x0B3D - EDRAM Test Mode
- Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
- PAM registers will be locked by RC
- 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
-**/
- UINT8 EdramTestMode;
-
-/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby
- Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
- $EN_DIS
-**/
- UINT8 RenderStandby;
-
-/** Offset 0x0B3F - Enable/Disable IGFX PmSupport
- Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
- $EN_DIS
-**/
- UINT8 PmSupport;
-
-/** Offset 0x0B40 - Enable/Disable CdynmaxClamp
- Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
- $EN_DIS
-**/
- UINT8 CdynmaxClampEnable;
-
-/** Offset 0x0B41 - GT Frequency Limit
- 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
- 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
- 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
- 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
- 0x18: 1200 Mhz
- 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
- 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
- 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
- 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
- 0x18: 1200 Mhz
-**/
- UINT8 GtFreqMax;
-
-/** Offset 0x0B42 - Disable Turbo GT
- 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
- $EN_DIS
-**/
- UINT8 DisableTurboGt;
-
-/** Offset 0x0B43 - Enable/Disable CdClock Init
- Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
- CD clock if not initialized by Gfx PEIM
- $EN_DIS
-**/
- UINT8 SkipCdClockInit;
-
-/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met)
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 RC1pFreqEnable;
-
-/** Offset 0x0B45 - Enable TSN Multi-VC
- Enable/disable Multi Virtual Channels(VC) in TSN.
- $EN_DIS
-**/
- UINT8 PchTsnMultiVcEnable;
-
-/** Offset 0x0B46 - SaPostMemTestRsvd
- Reserved for SA Post-Mem Test
- $EN_DIS
-**/
- UINT8 SaPostMemTestRsvd[13];
-
-/** Offset 0x0B53 - RSR feature
- Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b>
- $EN_DIS
-**/
- UINT8 EnableRsr;
-
-/** Offset 0x0B54 - 1-Core Ratio Limit
- 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
- to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83
-**/
- UINT8 OneCoreRatioLimit;
-
-/** Offset 0x0B55 - 2-Core Ratio Limit
- 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 TwoCoreRatioLimit;
-
-/** Offset 0x0B56 - 3-Core Ratio Limit
- 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 ThreeCoreRatioLimit;
-
-/** Offset 0x0B57 - 4-Core Ratio Limit
- 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 FourCoreRatioLimit;
-
-/** Offset 0x0B58 - Enable or Disable HWP
- Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
- 2-3:Reserved
- $EN_DIS
-**/
- UINT8 Hwp;
-
-/** Offset 0x0B59 - Hardware Duty Cycle Control
- Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
- $EN_DIS
-**/
- UINT8 HdcControl;
-
-/** Offset 0x0B5A - Package Long duration turbo mode time
- Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
- 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
-**/
- UINT8 PowerLimit1Time;
-
-/** Offset 0x0B5B - Short Duration Turbo Mode
- Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 PowerLimit2;
-
-/** Offset 0x0B5C - Turbo settings Lock
- Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
- $EN_DIS
-**/
- UINT8 TurboPowerLimitLock;
-
-/** Offset 0x0B5D - Package PL3 time window
- Package PL3 time window range for this policy from 0 to 64ms
-**/
- UINT8 PowerLimit3Time;
-
-/** Offset 0x0B5E - Package PL3 Duty Cycle
- Package PL3 Duty Cycle; Valid Range is 0 to 100
-**/
- UINT8 PowerLimit3DutyCycle;
-
-/** Offset 0x0B5F - Package PL3 Lock
- Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
- $EN_DIS
-**/
- UINT8 PowerLimit3Lock;
-
-/** Offset 0x0B60 - Package PL4 Lock
- Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
- $EN_DIS
-**/
- UINT8 PowerLimit4Lock;
-
-/** Offset 0x0B61 - TCC Activation Offset
- TCC Activation Offset. Offset from factory set TCC activation temperature at which
- the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
- Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
- <b>10</b>, For all other SKUs the recommended default are <b>0</b>
-**/
- UINT8 TccActivationOffset;
-
-/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable
- Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
- below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
- For all other SKUs the recommended default are <b>0: Disabled</b>.
- $EN_DIS
-**/
- UINT8 TccOffsetClamp;
-
-/** Offset 0x0B63 - Tcc Offset Lock
- Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
- target; <b>0: Disabled</b>; 1: Enabled.
- $EN_DIS
-**/
- UINT8 TccOffsetLock;
-
-/** Offset 0x0B64 - Custom Ratio State Entries
- The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
- ratio table.Sets the number of custom P-states. At least 2 states must be present
-**/
- UINT8 NumberOfEntries;
-
-/** Offset 0x0B65 - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
-**/
- UINT8 Custom1PowerLimit1Time;
-
-/** Offset 0x0B66 - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
-**/
- UINT8 Custom1TurboActivationRatio;
-
-/** Offset 0x0B67 - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom1ConfigTdpControl;
-
-/** Offset 0x0B68 - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
-**/
- UINT8 Custom2PowerLimit1Time;
-
-/** Offset 0x0B69 - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
-**/
- UINT8 Custom2TurboActivationRatio;
-
-/** Offset 0x0B6A - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom2ConfigTdpControl;
-
-/** Offset 0x0B6B - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
-**/
- UINT8 Custom3PowerLimit1Time;
-
-/** Offset 0x0B6C - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
-**/
- UINT8 Custom3TurboActivationRatio;
-
-/** Offset 0x0B6D - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom3ConfigTdpControl;
-
-/** Offset 0x0B6E - ConfigTdp mode settings Lock
- Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 ConfigTdpLock;
-
-/** Offset 0x0B6F - Load Configurable TDP SSDT
- Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ConfigTdpBios;
-
-/** Offset 0x0B70 - PL1 Enable value
- PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 PsysPowerLimit1;
-
-/** Offset 0x0B71 - PL1 timewindow
- PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
- , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
-**/
- UINT8 PsysPowerLimit1Time;
-
-/** Offset 0x0B72 - PL2 Enable Value
- PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
- 1: Enable.
- $EN_DIS
-**/
- UINT8 PsysPowerLimit2;
-
-/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher
- Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MlcStreamerPrefetcher;
-
-/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher
- Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 MlcSpatialPrefetcher;
-
-/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions
- Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MonitorMwaitEnable;
-
-/** Offset 0x0B76 - Enable or Disable initialization of machine check registers
- Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MachineCheckEnable;
-
-/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI
- AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
- 1: HALT loop, 2: MWAIT loop, 3: RUN loop
-**/
- UINT8 ApIdleManner;
-
-/** Offset 0x0B78 - Control on Processor Trace output scheme
- Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
- 0: Single Range Output, 1: ToPA Output
-**/
- UINT8 ProcessorTraceOutputScheme;
-
-/** Offset 0x0B79 - Enable or Disable Processor Trace feature
- Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ProcessorTraceEnable;
-
-/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology
- Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 Eist;
-
-/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state
- Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
- <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnergyEfficientPState;
-
-/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo
- Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
- <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnergyEfficientTurbo;
-
-/** Offset 0x0B7D - Enable or Disable T states
- Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 TStates;
-
-/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT#
- Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 BiProcHot;
-
-/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally
- Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 DisableProcHotOut;
-
-/** Offset 0x0B80 - Enable or Disable PROCHOT# Response
- Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ProcHotResponse;
-
-/** Offset 0x0B81 - Enable or Disable VR Thermal Alert
- Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 DisableVrThermalAlert;
-
-/** Offset 0x0B82 - Enable or Disable Thermal Reporting
- Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 EnableAllThermalFunctions;
-
-/** Offset 0x0B83 - Enable or Disable Thermal Monitor
- Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 ThermalMonitor;
-
-/** Offset 0x0B84 - Enable or Disable CPU power states (C-states)
- Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 Cx;
-
-/** Offset 0x0B85 - Configure C-State Configuration Lock
- Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 PmgCstCfgCtrlLock;
-
-/** Offset 0x0B86 - Enable or Disable Enhanced C-states
- Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1e;
-
-/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion
- Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 PkgCStateDemotion;
-
-/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion
- Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 PkgCStateUnDemotion;
-
-/** Offset 0x0B89 - Enable or Disable CState-Pre wake
- Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 CStatePreWake;
-
-/** Offset 0x0B8A - Enable or Disable TimedMwait Support.
- Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 TimedMwait;
-
-/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection
- Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 CstCfgCtrIoMwaitRedirection;
-
-/** Offset 0x0B8C - Set the Max Pkg Cstate
- Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
- C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
- 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
-**/
- UINT8 PkgCStateLimit;
-
-/** Offset 0x0B8D - TimeUnit for C-State Latency Control0
- TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl0TimeUnit;
-
-/** Offset 0x0B8E - TimeUnit for C-State Latency Control1
- TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl1TimeUnit;
-
-/** Offset 0x0B8F - TimeUnit for C-State Latency Control2
- TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl2TimeUnit;
-
-/** Offset 0x0B90 - TimeUnit for C-State Latency Control3
- TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl3TimeUnit;
-
-/** Offset 0x0B91 - TimeUnit for C-State Latency Control4
- Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl4TimeUnit;
-
-/** Offset 0x0B92 - TimeUnit for C-State Latency Control5
- TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl5TimeUnit;
-
-/** Offset 0x0B93 - Interrupt Redirection Mode Select
- Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
- No change.
-**/
- UINT8 PpmIrmSetting;
-
-/** Offset 0x0B94 - Lock prochot configuration
- Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 ProcHotLock;
-
-/** Offset 0x0B95 - Configuration for boot TDP selection
- Deprecated. Move to premem.
-**/
- UINT8 DeprecatedConfigTdpLevel;
-
-/** Offset 0x0B96 - Max P-State Ratio
- Max P-State Ratio, Valid Range 0 to 0x7F
-**/
- UINT8 MaxRatio;
-
-/** Offset 0x0B97 - P-state ratios for custom P-state table
- P-state ratios for custom P-state table. NumberOfEntries has valid range between
- 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
- are configurable. Valid Range of each entry is 0 to 0x7F
-**/
- UINT8 StateRatio[40];
-
-/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table
- P-state ratios for max 16 version of custom P-state table. This table is used for
- OS versions limited to a max of 16 P-States. If the first entry of this table is
- 0, or if Number of Entries is 16 or less, then this table will be ignored, and
- up to the top 16 values of the StateRatio table will be used instead. Valid Range
- of each entry is 0 to 0x7F
-**/
- UINT8 StateRatioMax16[16];
-
-/** Offset 0x0BCF
-**/
- UINT8 UnusedUpdSpace29;
-
-/** Offset 0x0BD0 - Platform Power Pmax
- PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
- Range 0-1024 Watts. Value of 800 = 100W
-**/
- UINT16 PsysPmax;
-
-/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1
- Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
- 0 is Auto.
-**/
- UINT16 CstateLatencyControl1Irtl;
-
-/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2
- Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
- 0 is Auto.
-**/
- UINT16 CstateLatencyControl2Irtl;
-
-/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3
- Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
- 0 is Auto.
-**/
- UINT16 CstateLatencyControl3Irtl;
-
-/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4
- Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
- 0 is Auto.
-**/
- UINT16 CstateLatencyControl4Irtl;
-
-/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5
- Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
- 0 is Auto.
-**/
- UINT16 CstateLatencyControl5Irtl;
-
-/** Offset 0x0BDC - Package Long duration turbo mode power limit
- Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
- Valid Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit1;
-
-/** Offset 0x0BE0 - Package Short duration turbo mode power limit
- Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit2Power;
-
-/** Offset 0x0BE4 - Package PL3 power limit
- Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit3;
-
-/** Offset 0x0BE8 - Package PL4 power limit
- Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit4;
-
-/** Offset 0x0BEC - Tcc Offset Time Window for RATL
- Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 TccOffsetTimeWindowForRatl;
-
-/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1
- Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom1PowerLimit1;
-
-/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1
- Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom1PowerLimit2;
-
-/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2
- Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom2PowerLimit1;
-
-/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2
- Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom2PowerLimit2;
-
-/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3
- Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom3PowerLimit1;
-
-/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3
- Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom3PowerLimit2;
-
-/** Offset 0x0C08 - Platform PL1 power
- Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
- 0 to 4095875 in Step size of 125
-**/
- UINT32 PsysPowerLimit1Power;
-
-/** Offset 0x0C0C - Platform PL2 power
- Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
- 0 to 4095875 in Step size of 125
-**/
- UINT32 PsysPowerLimit2Power;
-
-/** Offset 0x0C10 - Race To Halt
- Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
- in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
- through MSR 1FC bit 20)Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 RaceToHalt;
-
-/** Offset 0x0C11 - Set Three Strike Counter Disable
- False (default): Three Strike counter will be incremented and True: Prevents Three
- Strike counter from incrementing; <b>0: False</b>; 1: True.
- 0: False, 1: True
-**/
- UINT8 ThreeStrikeCounterDisable;
-
-/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
- Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 HwpInterruptControl;
-
-/** Offset 0x0C13 - 5-Core Ratio Limit
- 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 FiveCoreRatioLimit;
-
-/** Offset 0x0C14 - 6-Core Ratio Limit
- 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 SixCoreRatioLimit;
-
-/** Offset 0x0C15 - 7-Core Ratio Limit
- 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 SevenCoreRatioLimit;
-
-/** Offset 0x0C16 - 8-Core Ratio Limit
- 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 EightCoreRatioLimit;
-
-/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0
- Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
- $EN_DIS
-**/
- UINT8 EnableItbm;
-
-/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver
- @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL
- $EN_DIS
-**/
- UINT8 EnableItbmDriver;
-
-/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion
- Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1StateAutoDemotion;
-
-/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion
- Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1StateUnDemotion;
-
-/** Offset 0x0C1B - Minimum Ring ratio limit override
- Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
- ratio limit
-**/
- UINT8 MinRingRatioLimit;
-
-/** Offset 0x0C1C - Maximum Ring ratio limit override
- Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
- ratio limit
-**/
- UINT8 MaxRingRatioLimit;
-
-/** Offset 0x0C1D - Enable or Disable Per Core P State OS control
- Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnablePerCorePState;
-
-/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control
- Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
- Enable</b>
- $EN_DIS
-**/
- UINT8 EnableHwpAutoPerCorePstate;
-
-/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping
- Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnableHwpAutoEppGrouping;
-
-/** Offset 0x0C20 - Enable or Disable EPB override over PECI
- Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
- $EN_DIS
-**/
- UINT8 EnableEpbPeciOverride;
-
-/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST
- Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnableFastMsrHwpReq;
-
-/** Offset 0x0C22 - Enable Configurable TDP
- Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP;
- <b>1: Applies to cTDP</b>
- $EN_DIS
-**/
- UINT8 ApplyConfigTdp;
-
-/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration
- Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs.
- $EN_DIS
-**/
- UINT8 VccInDemotionOverride;
-
-/** Offset 0x0C24 - Customize the VccIn Demotion in ms.
- Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be
- in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on.
- Value 0 will disable VccIn Demotion knob.<b> It's 30ms by silicon default</b>
-**/
- UINT32 VccInDemotionMs;
-
-/** Offset 0x0C28 - ReservedCpuPostMemTest
- Reserved for CPU Post-Mem Test
- $EN_DIS
-**/
- UINT8 ReservedCpuPostMemTest[11];
-
-/** Offset 0x0C33 - SgxSinitDataFromTpm
- SgxSinitDataFromTpm default values
-**/
- UINT8 SgxSinitDataFromTpm;
-
-/** Offset 0x0C34
-**/
- UINT8 SecurityPostMemRsvd[16];
-
-/** Offset 0x0C44 - End of Post message
- Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
- EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
- 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
-**/
- UINT8 EndOfPostMessage;
-
-/** Offset 0x0C45 - D0I3 Setting for HECI Disable
- Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
- HECI devices
- $EN_DIS
-**/
- UINT8 DisableD0I3SettingForHeci;
-
-/** Offset 0x0C46 - Enable LOCKDOWN SMI
- Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
- $EN_DIS
-**/
- UINT8 PchLockDownGlobalSmi;
-
-/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface
- Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
- $EN_DIS
-**/
- UINT8 PchLockDownBiosInterface;
-
-/** Offset 0x0C48 - Unlock all GPIO pads
- Force all GPIO pads to be unlocked for debug purpose.
- $EN_DIS
-**/
- UINT8 PchUnlockGpioPads;
-
-/** Offset 0x0C49 - PCH Unlock SideBand access
- The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
- 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
- $EN_DIS
-**/
- UINT8 PchSbAccessUnlock;
-
-/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency
- Latency Tolerance Reporting, Max Snoop Latency.
-**/
- UINT16 PcieRpLtrMaxSnoopLatency[24];
-
-/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency
- Latency Tolerance Reporting, Max Non-Snoop Latency.
-**/
- UINT16 PcieRpLtrMaxNoSnoopLatency[24];
-
-/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode
- Latency Tolerance Reporting, Snoop Latency Override Mode.
-**/
- UINT8 PcieRpSnoopLatencyOverrideMode[24];
-
-/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Snoop Latency Override Multiplier.
-**/
- UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
-
-/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value
- Latency Tolerance Reporting, Snoop Latency Override Value.
-**/
- UINT16 PcieRpSnoopLatencyOverrideValue[24];
-
-/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode
- Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
-**/
- UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
-
-/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
-**/
- UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
-
-/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value
- Latency Tolerance Reporting, Non-Snoop Latency Override Value.
-**/
- UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
-
-/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale
- Specifies scale used for slot power limit value. Leave as 0 to set to default.
-**/
- UINT8 PcieRpSlotPowerLimitScale[24];
-
-/** Offset 0x0D82 - PCIE RP Slot Power Limit Value
- Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
-**/
- UINT16 PcieRpSlotPowerLimitValue[24];
-
-/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode
- This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
- 1: Enable.
- $EN_DIS
-**/
- UINT8 PcieEnablePort8xhDecode;
-
-/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index
- The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
-**/
- UINT8 PchPciePort8xhDecodePortIndex;
-
-/** Offset 0x0DB4 - PCH Energy Reporting
- Disable/Enable PCH to CPU energy report feature.
- $EN_DIS
-**/
- UINT8 PchPmDisableEnergyReport;
-
-/** Offset 0x0DB5 - PCH Sata Test Mode
- Allow entrance to the PCH SATA test modes.
- $EN_DIS
-**/
- UINT8 SataTestMode;
-
-/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable
- If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
- that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
- $EN_DIS
-**/
- UINT8 PchXhciOcLock;
-
-/** Offset 0x0DB7 - LpmStateEnableMask
-**/
- UINT8 LpmStateEnableMask;
-
-/** Offset 0x0DB8 - Mctp Broadcast Cycle
- Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 MctpBroadcastCycle;
-
-/** Offset 0x0DB9
-**/
- UINT8 UnusedUpdSpace30[1];
-
-/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency
- Latency Tolerance Reporting, Max Snoop Latency.
-**/
- UINT16 CpuPcieRpLtrMaxSnoopLatency[4];
-
-/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency
- Latency Tolerance Reporting, Max Non-Snoop Latency.
-**/
- UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4];
-
-/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode
- Latency Tolerance Reporting, Snoop Latency Override Mode.
-**/
- UINT8 CpuPcieRpSnoopLatencyOverrideMode[4];
-
-/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Snoop Latency Override Multiplier.
-**/
- UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4];
-
-/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value
- Latency Tolerance Reporting, Snoop Latency Override Value.
-**/
- UINT16 CpuPcieRpSnoopLatencyOverrideValue[4];
-
-/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode
- Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
-**/
- UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4];
-
-/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
-**/
- UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4];
-
-/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value
- Latency Tolerance Reporting, Non-Snoop Latency Override Value.
-**/
- UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4];
-
-/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset
- Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
-**/
- UINT8 CpuPcieRpGen3Uptp[4];
-
-/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset
- Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
-**/
- UINT8 CpuPcieRpGen3Dptp[4];
-
-/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset
- Used during Gen4 Link Equalization. Used for all lanes. Default is 8.
-**/
- UINT8 CpuPcieRpGen4Uptp[4];
-
-/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset
- Used during Gen4 Link Equalization. Used for all lanes. Default is 9.
-**/
- UINT8 CpuPcieRpGen4Dptp[4];
-
-/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable
- Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs
- $EN_DIS
-**/
- UINT8 PmcC10DynamicThresholdAdjustment;
-
-/** Offset 0x0DFB - FOMS Control Policy
- Choose the Foms Control Policy, <b>Default = 0 </b>
- 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms
-**/
- UINT8 CpuPcieFomsCp[4];
-
-/** Offset 0x0DFF
-**/
- UINT8 UnusedUpdSpace31;
-
-/** Offset 0x0E00 - LogoPixelHeight Address
- Address of LogoPixelHeight
-**/
- UINT32 LogoPixelHeight;
-
-/** Offset 0x0E04 - LogoPixelWidth Address
- Address of LogoPixelWidth
-**/
- UINT32 LogoPixelWidth;
-
-/** Offset 0x0E08 - P2P mode for PCIE RP
- Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable.
- 0: Disable, 1: Enable
-**/
- UINT8 CpuPcieRpPeerToPeerMode[4];
-
-/** Offset 0x0E0C - Map port under VMD
- Map/UnMap port under VMD
- $EN_DIS
-**/
- UINT8 VmdPort[31];
-
-/** Offset 0x0E2B - VMD Port Device
- VMD Root port device number.
-**/
- UINT8 VmdPortDev[31];
-
-/** Offset 0x0E4A - VMD Port Func
- VMD Root port function number.
-**/
- UINT8 VmdPortFunc[31];
-
-/** Offset 0x0E69
-**/
- UINT8 UnusedUpdSpace32[3];
-
-/** Offset 0x0E6C - VMD Variable
- VMD Variable Pointer.
-**/
- UINT32 VmdVariablePtr;
-
-/** Offset 0x0E70 - Thermal Design Current time window
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- Range 1ms to 448s
-**/
- UINT32 TdcTimeWindow1[5];
-
-/** Offset 0x0E84 - Temporary CfgBar address for VMD
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- Range 1ms to 448s
-**/
- UINT32 VmdCfgBarBase;
-
-/** Offset 0x0E88 - Temporary MemBar1 address for VMD
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- Range 1ms to 448s
-**/
- UINT32 VmdMemBar1Base;
-
-/** Offset 0x0E8C - Temporary MemBar2 address for VMD
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- Range 1ms to 448s
-**/
- UINT32 VmdMemBar2Base;
-
-/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits
- Set TSN1 MAC Address High.
-**/
- UINT32 PchTsn1MacAddressHigh;
-
-/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits
- Set TSN1 MAC Address Low.
-**/
- UINT32 PchTsn1MacAddressLow;
-
-/** Offset 0x0E98 - FspEventHandler
- <b>Optional</b> pointer to the boot loader's implementation of FSP_EVENT_HANDLER.
-**/
- UINT32 FspEventHandler;
-
-/** Offset 0x0E9C - Enable VMD Global Mapping
- Enable/disable to VMD controller.0: Disable(Default); 1: Enable
- $EN_DIS
-**/
- UINT8 VmdGlobalMapping;
-
-/** Offset 0x0E9D - PCH XHCI LTR Mode Enable
- Enable/Disable PCH XHCI LTR Mode.0: Disable; 1: Enable(Default).
- $EN_DIS
-**/
- UINT8 PchXhciLtrModeEnable;
-
-/** Offset 0x0E9E
-**/
- UINT8 UnusedUpdSpace33[3];
-
-/** Offset 0x0EA1
-**/
- UINT8 ReservedFspsUpd[7];
-} FSP_S_CONFIG;
-
-/** Fsp S UPD Configuration
-**/
-typedef struct {
-
-/** Offset 0x0000
-**/
- FSP_UPD_HEADER FspUpdHeader;
-
-/** Offset 0x0020
-**/
- FSP_S_CONFIG FspsConfig;
-
-/** Offset 0x0EA8
-**/
- UINT8 UnusedUpdSpace34[6];
-
-/** Offset 0x0EAE
-**/
- UINT16 UpdTerminator;
-} FSPS_UPD;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h
deleted file mode 100644
index 07de7d7..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/** @file
- This file contains definitions required for creation of
- Memory S3 Save data, Memory Info data and Memory Platform
- data hobs.
-
- @copyright
- Copyright (c) 1999 - 2019, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-@par Specification Reference:
-**/
-#ifndef _MEM_INFO_HOB_H_
-#define _MEM_INFO_HOB_H_
-
-#include <Uefi/UefiMultiPhase.h>
-#include <Pi/PiBootMode.h>
-#include <Pi/PiHob.h>
-
-#pragma pack (push, 1)
-
-extern EFI_GUID gSiMemoryS3DataGuid;
-extern EFI_GUID gSiMemoryInfoDataGuid;
-extern EFI_GUID gSiMemoryPlatformDataGuid;
-
-#define MAX_TRACE_CACHE_TYPE 3
-
-#define MAX_NODE 2
-#define MAX_CH 4
-#define MAX_DIMM 2
-
-///
-/// Host reset states from MRC.
-///
-#define WARM_BOOT 2
-
-#define R_MC_CHNL_RANK_PRESENT 0x7C
-#define B_RANK0_PRS BIT0
-#define B_RANK1_PRS BIT1
-#define B_RANK2_PRS BIT4
-#define B_RANK3_PRS BIT5
-
-// @todo remove and use the MdePkg\Include\Pi\PiHob.h
-#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__)
-#ifndef __HOB__H__
-typedef struct _EFI_HOB_GENERIC_HEADER {
- UINT16 HobType;
- UINT16 HobLength;
- UINT32 Reserved;
-} EFI_HOB_GENERIC_HEADER;
-
-typedef struct _EFI_HOB_GUID_TYPE {
- EFI_HOB_GENERIC_HEADER Header;
- EFI_GUID Name;
- ///
- /// Guid specific data goes here
- ///
-} EFI_HOB_GUID_TYPE;
-#endif
-#endif
-
-///
-/// Defines taken from MRC so avoid having to include MrcInterface.h
-///
-
-//
-// Matches MAX_SPD_SAVE define in MRC
-//
-#ifndef MAX_SPD_SAVE
-#define MAX_SPD_SAVE 29
-#endif
-
-//
-// MRC version description.
-//
-typedef struct {
- UINT8 Major; ///< Major version number
- UINT8 Minor; ///< Minor version number
- UINT8 Rev; ///< Revision number
- UINT8 Build; ///< Build number
-} SiMrcVersion;
-
-//
-// Matches MrcChannelSts enum in MRC
-//
-#ifndef CHANNEL_NOT_PRESENT
-#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller.
-#endif
-#ifndef CHANNEL_DISABLED
-#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled.
-#endif
-#ifndef CHANNEL_PRESENT
-#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled.
-#endif
-
-//
-// Matches MrcDimmSts enum in MRC
-//
-#ifndef DIMM_ENABLED
-#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
-#endif
-#ifndef DIMM_DISABLED
-#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
-#endif
-#ifndef DIMM_PRESENT
-#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
-#endif
-#ifndef DIMM_NOT_PRESENT
-#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
-#endif
-
-//
-// Matches MrcBootMode enum in MRC
-//
-#ifndef __MRC_BOOT_MODE__
-#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h
- #ifndef INT32_MAX
- #define INT32_MAX (0x7FFFFFFF)
- #endif //INT32_MAX
-typedef enum {
- bmCold, ///< Cold boot
- bmWarm, ///< Warm boot
- bmS3, ///< S3 resume
- bmFast, ///< Fast boot
- MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value.
- MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI.
-} MRC_BOOT_MODE;
-#endif //__MRC_BOOT_MODE__
-
-//
-// Matches MrcDdrType enum in MRC
-//
-#ifndef MRC_DDR_TYPE_DDR4
-#define MRC_DDR_TYPE_DDR4 0
-#endif
-#ifndef MRC_DDR_TYPE_DDR3
-#define MRC_DDR_TYPE_DDR3 1
-#endif
-#ifndef MRC_DDR_TYPE_LPDDR3
-#define MRC_DDR_TYPE_LPDDR3 2
-#endif
-#ifndef MRC_DDR_TYPE_LPDDR4
-#define MRC_DDR_TYPE_LPDDR4 3
-#endif
-#ifndef MRC_DDR_TYPE_WIO2
-#define MRC_DDR_TYPE_WIO2 4
-#endif
-#ifndef MRC_DDR_TYPE_UNKNOWN
-#define MRC_DDR_TYPE_UNKNOWN 5
-#endif
-
-#define MAX_PROFILE_NUM 4 // number of memory profiles supported
-#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported
-
-//
-// DIMM timings
-//
-typedef struct {
- UINT32 tCK; ///< Memory cycle time, in femtoseconds.
- UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode.
- UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency.
- UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
- UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
- UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
- UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
- UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
- UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
- UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
- UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
- UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
- UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
- UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
- UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
- UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
- UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
- UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time.
- UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
- UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
- UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
- UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
-} MRC_CH_TIMING;
-
-///
-/// Memory SMBIOS & OC Memory Data Hob
-///
-typedef struct {
- UINT8 Status; ///< See MrcDimmStatus for the definition of this field.
- UINT8 DimmId;
- UINT32 DimmCapacity; ///< DIMM size in MBytes.
- UINT16 MfgId;
- UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
- UINT8 RankInDimm; ///< The number of ranks in this DIMM.
- UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
- UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation.
- UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation.
- UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation.
- UINT16 Speed; ///< The maximum capable speed of the device, in MHz
- UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation.
-} DIMM_INFO;
-
-typedef struct {
- UINT8 Status; ///< Indicates whether this channel should be used.
- UINT8 ChannelId;
- UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel.
- MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values.
- DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics.
-} CHANNEL_INFO;
-
-typedef struct {
- UINT8 Status; ///< Indicates whether this controller should be used.
- UINT16 DeviceId; ///< The PCI device id of this memory controller.
- UINT8 RevisionId; ///< The PCI revision id of this memory controller.
- UINT8 ChannelCount; ///< Number of valid channels that exist on the controller.
- CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions.
-} CONTROLLER_INFO;
-
-typedef struct {
- UINT64 BaseAddress; ///< Trace Base Address
- UINT64 TotalSize; ///< Total Trace Region of Same Cache type
- UINT8 CacheType; ///< Trace Cache Type
- UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code
- UINT8 Rsvd[2];
-} PSMI_MEM_INFO;
-
-typedef struct {
- UINT8 Revision;
- UINT16 DataWidth; ///< Data width, in bits, of this memory device
- /** As defined in SMBIOS 3.0 spec
- Section 7.18.2 and Table 75
- **/
- UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3
- UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz)
- UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz)
- /** As defined in SMBIOS 3.0 spec
- Section 7.17.3 and Table 72
- **/
- UINT8 ErrorCorrectionType;
-
- SiMrcVersion Version;
- BOOLEAN EccSupport;
- UINT8 MemoryProfile;
- UINT32 TotalPhysicalMemorySize;
- UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
- UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs.
- UINT8 Ratio;
- UINT8 RefClk;
- UINT32 VddVoltage[MAX_PROFILE_NUM];
- CONTROLLER_INFO Controller[MAX_NODE];
-} MEMORY_INFO_DATA_HOB;
-
-/**
- Memory Platform Data Hob
-
- <b>Revision 1:</b>
- - Initial version.
- <b>Revision 2:</b>
- - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields
-**/
-typedef struct {
- UINT8 Revision;
- UINT8 Reserved[3];
- UINT32 BootMode;
- UINT32 TsegSize;
- UINT32 TsegBase;
- UINT32 PrmrrSize;
- UINT64 PrmrrBase;
- UINT32 PramSize;
- UINT64 PramBase;
- UINT64 DismLimit;
- UINT64 DismBase;
- UINT32 GttBase;
- UINT32 MmioSize;
- UINT32 PciEBaseAddress;
- PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE];
-} MEMORY_PLATFORM_DATA;
-
-typedef struct {
- EFI_HOB_GUID_TYPE EfiHobGuidType;
- MEMORY_PLATFORM_DATA Data;
- UINT8 *Buffer;
-} MEMORY_PLATFORM_DATA_HOB;
-
-#pragma pack (pop)
-
-#endif // _MEM_INFO_HOB_H_