cpu/x86: Set up a separate stack for APs
APs use a lot less stack, so set up a separate stack for those in .bss.
Now that CPU_INFO_V2 is the only code path that is used, there is no
need to align stacks in c_start.S.
Change-Id: I7a681a2e3003da0400843daa5d6d6180d952abf5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig
index 2253e18..7e58175 100644
--- a/src/cpu/x86/Kconfig
+++ b/src/cpu/x86/Kconfig
@@ -202,4 +202,11 @@
However, modern OSes use PAT to control cacheability instead of
using MTRRs.
+config AP_STACK_SIZE
+ hex
+ default 0x800
+ help
+ This is the amount of stack each AP needs. The BSP stack size can be
+ larger and is set with STACK_SIZE.
+
endif # ARCH_X86
diff --git a/src/cpu/x86/mp_init.c b/src/cpu/x86/mp_init.c
index f004185..507da7d 100644
--- a/src/cpu/x86/mp_init.c
+++ b/src/cpu/x86/mp_init.c
@@ -215,6 +215,8 @@
park_this_cpu(NULL);
}
+static __aligned(16) uint8_t ap_stack[CONFIG_AP_STACK_SIZE * CONFIG_MAX_CPUS];
+
static void setup_default_sipi_vector_params(struct sipi_params *sp)
{
sp->gdt = (uintptr_t)&gdt;
@@ -222,8 +224,8 @@
sp->idt_ptr = (uintptr_t)&idtarg;
sp->per_cpu_segment_descriptors = (uintptr_t)&per_cpu_segment_descriptors;
sp->per_cpu_segment_selector = per_cpu_segment_selector;
- sp->stack_size = CONFIG_STACK_SIZE;
- sp->stack_top = ALIGN_DOWN((uintptr_t)&_estack, CONFIG_STACK_SIZE);
+ sp->stack_size = CONFIG_AP_STACK_SIZE;
+ sp->stack_top = (uintptr_t)ap_stack + ARRAY_SIZE(ap_stack);
}
static const unsigned int fixed_mtrrs[NUM_FIXED_MTRRS] = {