sc7180: Add display 10nm phy & pll programming support
Adds basic headers as well as source required for display
dsi 10nm phy & pll programming.
Changes in V1:
- add struct overlays to model hardware registers.
- remove typedef structures.
- remove dead code such as dual dsi,split config etc.
Changes in V2:
- remove panel related header files.
- update the bitclock calculation using edid parameters.
- add phy timing calculation function.
- update copyright license.
Changes in V3:
- update the mdss clock structure.
- remove dsi_phy_configinfo_type struct.
- remove unused struct fields.
Changes in V4:
- update clock apis.
- remove unused structures.
Change-Id: I8ff400922ae594f558cf73a5aaa433a3a93347c2
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
diff --git a/src/soc/qualcomm/sc7180/display/dsi_phy.c b/src/soc/qualcomm/sc7180/display/dsi_phy.c
new file mode 100644
index 0000000..050a5d8
--- /dev/null
+++ b/src/soc/qualcomm/sc7180/display/dsi_phy.c
@@ -0,0 +1,765 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <delay.h>
+#include <device/mmio.h>
+#include <edid.h>
+#include <lib.h>
+#include <soc/clock.h>
+#include <soc/display/dsi_phy.h>
+#include <soc/display/mdssreg.h>
+#include <soc/display/display_resources.h>
+#include <string.h>
+#include <timer.h>
+
+#define HAL_DSI_PHY_PLL_READY_TIMEOUT_MS 150 /* ~15 ms */
+#define HAL_DSI_PHY_REFGEN_TIMEOUT_MS 150 /* ~15 ms */
+
+#define DSI_MAX_REFRESH_RATE 95
+#define DSI_MIN_REFRESH_RATE 15
+
+#define HAL_DSI_PLL_VCO_MIN_MHZ_2_2_0 1000
+
+#define S_DIV_ROUND_UP(n, d) \
+ (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+#define mult_frac(x, numer, denom)( \
+{ \
+ typeof(x) quot = (x) / (denom); \
+ typeof(x) rem = (x) % (denom); \
+ (quot * (numer)) + ((rem * (numer)) / (denom)); \
+} \
+)
+
+struct dsi_phy_divider_lut_entry_type {
+ uint16_t pll_post_div;
+ uint16_t phy_post_div;
+};
+
+/* PLL divider LUTs */
+static struct dsi_phy_divider_lut_entry_type pll_dividerlut_dphy[] = {
+/* pll post div will always be power of 2 */
+ { 2, 11 },
+ { 4, 5 },
+ { 2, 9 },
+ { 8, 2 },
+ { 1, 15 },
+ { 2, 7 },
+ { 1, 13 },
+ { 4, 3 },
+ { 1, 11 },
+ { 2, 5 },
+ { 1, 9 },
+ { 8, 1 },
+ { 1, 7 },
+ { 2, 3 },
+ { 1, 5 },
+ { 4, 1 },
+ { 1, 3 },
+ { 2, 1 },
+ { 1, 1 }
+};
+
+enum dsi_laneid_type {
+ DSI_LANEID_0 = 0,
+ DSI_LANEID_1,
+ DSI_LANEID_2,
+ DSI_LANEID_3,
+ DSI_LANEID_CLK,
+ DSI_LANEID_MAX,
+ DSI_LANEID_FORCE_32BIT = 0x7FFFFFFF
+};
+
+struct dsi_phy_configtype {
+ uint32_t desired_bitclk_freq;
+ uint32_t bits_per_pixel;
+ uint32_t num_data_lanes;
+ uint32_t pclk_divnumerator;
+ uint32_t pclk_divdenominator;
+
+ /* pixel clk source select */
+ uint32_t phy_post_div;
+ uint32_t pll_post_div;
+};
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+ s32 min_result, bool even)
+{
+ s32 v;
+
+ v = (tmax - tmin) * percent;
+ v = S_DIV_ROUND_UP(v, 100) + tmin;
+ if (even && (v & 0x1))
+ return MAX(min_result, v - 1);
+
+ return MAX(min_result, v);
+}
+
+static void mdss_dsi_phy_reset(void)
+{
+ write32(&dsi0_phy->phy_cmn_ctrl1, 0x40);
+ udelay(100);
+ write32(&dsi0_phy->phy_cmn_ctrl1, 0x0);
+}
+
+static void mdss_dsi_power_down(void)
+{
+ /* power up DIGTOP & PLL */
+ write32(&dsi0_phy->phy_cmn_ctrl0, 0x60);
+
+ /* Disable PLL */
+ write32(&dsi0_phy->phy_cmn_pll_ctrl, 0x0);
+
+ /* Resync re-time FIFO OFF*/
+ write32(&dsi0_phy->phy_cmn_rbuf_ctrl, 0x0);
+}
+
+static void mdss_dsi_phy_setup_lanephy(enum dsi_laneid_type lane)
+{
+ uint32_t reg_val = 0;
+ uint32_t lprx_ctrl = 0;
+ uint32_t hstx_strength = 0x88;
+ uint32_t data_strength_lp_n = 0x5;
+ uint32_t data_strength_lp_p = 0x5;
+ uint32_t pemph_bottom = 0;
+ uint32_t pemph_top = 0;
+ uint32_t strength_override = 0;
+ uint32_t clk_lane = 0;
+
+ if (lane == DSI_LANEID_CLK)
+ clk_lane = 1;
+ else
+ clk_lane = 0;
+
+ if (lane == DSI_LANEID_0)
+ lprx_ctrl = 3;
+
+ /*
+ * DSIPHY_STR_LP_N
+ * DSIPHY_STR_LP_P
+ */
+ reg_val = ((data_strength_lp_n << 0x4) & 0xf0) |
+ (data_strength_lp_p & 0x0f);
+
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_lptx_str_ctrl, reg_val);
+
+ /*
+ * DSIPHY_LPRX_EN
+ * DSIPHY_CDRX_EN
+ * Transition from 0 to 1 for DLN0-3 CLKLN stays 0
+ */
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_lprx_ctrl, 0x0);
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_lprx_ctrl, lprx_ctrl);
+
+ /* Pin Swap */
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_pin_swap, 0x0);
+
+ /*
+ * DSIPHY_HSTX_STR_HSTOP
+ * DSIPHY_HSTX_STR_HSBOT
+ */
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_hstx_str_ctrl, hstx_strength);
+
+ /* PGM Delay */
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_cfg[0], 0x0);
+
+ /* DLN0_CFG1 */
+ reg_val = (strength_override << 0x5) & 0x20;
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_cfg[1], reg_val);
+
+ /* DLN0_CFG2 */
+ reg_val = ((pemph_bottom << 0x04) & 0xf0) |
+ (pemph_top & 0x0f);
+
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_cfg[2], reg_val);
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_offset_top_ctrl, 0x0);
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_offset_bot_ctrl, 0x0);
+
+ /*
+ * DSIPHY_LPRX_DLY
+ * IS_CKLANE
+ */
+ reg_val = (clk_lane << 0x07) & 0x80;
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_cfg[3], reg_val);
+
+ reg_val = 0;
+ if (lane == DSI_LANEID_CLK)
+ reg_val = 1;
+
+ write32(&dsi0_phy->phy_ln_regs[lane].dln0_tx_dctrl, reg_val);
+}
+
+static void mdss_dsi_calculate_phy_timings(struct msm_dsi_phy_ctrl *timing,
+ struct dsi_phy_configtype *phy_cfg)
+{
+ const unsigned long bit_rate = phy_cfg->desired_bitclk_freq;
+ s32 ui, ui_x8;
+ s32 tmax, tmin;
+ s32 pcnt0 = 50;
+ s32 pcnt1 = 50;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = 30;
+ s32 pcnt4 = 10;
+ s32 pcnt5 = 2;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en, hb_en_ckln;
+ s32 temp;
+
+ if (!bit_rate)
+ return;
+
+ hb_en = 0;
+ timing->half_byte_clk_en = 0;
+ hb_en_ckln = 0;
+
+ ui = mult_frac(1000000, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+
+ temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+ tmin = MAX(temp, 0);
+ temp = (95 * coeff) / ui_x8;
+ tmax = MAX(temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+ temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+ tmin = MAX(temp, 0);
+ temp = (85 * coeff + 6 * ui) / ui_x8;
+ tmax = MAX(temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+ temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp / ui_x8) - 1;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ temp = 60 * coeff + 52 * ui - 43 * ui;
+ tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+ temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+ temp += hb_en_ckln ? (((timing->hs_rqst << 3) + 4) * ui) :
+ (((timing->hs_rqst << 3) + 8) * ui);
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ if (tmin > tmax) {
+ temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+ timing->clk_pre = temp >> 1;
+ timing->clk_pre_inc_by_2 = 1;
+ } else {
+ timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->clk_pre_inc_by_2 = 0;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ printk(BIOS_INFO, "PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
+ timing->clk_pre, timing->clk_post,
+ timing->clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst);
+}
+
+static enum cb_err mdss_dsi_phy_timings(struct msm_dsi_phy_ctrl *phy_timings)
+{
+ uint32_t reg_val = 0;
+
+ /*
+ * Step 4 Common block including GlobalTiming Parameters
+ * BYTECLK_SEL
+ */
+ reg_val = (0x02 << 3) & 0x18;
+ write32(&dsi0_phy->phy_cmn_glbl_ctrl, reg_val);
+
+ /* VREG_CTRL */
+ write32(&dsi0_phy->phy_cmn_vreg_ctrl, 0x59);
+
+ /*HALFBYTECLK_EN*/
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[0], phy_timings->half_byte_clk_en);
+
+ /* T_CLK_ZERO */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[1], phy_timings->clk_zero);
+
+ /* T_CLK_PREPARE */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[2], phy_timings->clk_prepare);
+
+ /* T_CLK_TRAIL */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[3], phy_timings->clk_trail);
+
+ /* T_HS_EXIT */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[4], phy_timings->hs_exit);
+
+ /* T_HS_ZERO */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[5], phy_timings->hs_zero);
+
+ /* T_HS_PREPARE */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[6], phy_timings->hs_prepare);
+
+ /* T_HS_TRAIL */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[7], phy_timings->hs_trail);
+
+ /* T_HS_RQST */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[8], phy_timings->hs_rqst);
+
+ /* T_TA_GO & T_TA_SURE */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[9],
+ phy_timings->ta_sure << 3 | phy_timings->ta_go);
+
+ /* T_TA_GET */
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[10], phy_timings->ta_get);
+
+ /*DSIPHY_TRIG3_CMD*/
+ write32(&dsi0_phy->phy_cmn_timing_ctrl[11], 0x0);
+
+ /* DSI clock out timing ctrl T_CLK_PRE & T_CLK_POST*/
+ reg_val = ((phy_timings->clk_post << 8) | phy_timings->clk_pre);
+ write32(&dsi0->clkout_timing_ctrl, reg_val);
+
+ /* DCTRL */
+ write32(&dsi0_phy->phy_cmn_ctrl2, 0x40);
+
+ return CB_SUCCESS;
+}
+
+static enum cb_err dsi_phy_waitforrefgen(void)
+{
+ uint32_t timeout = HAL_DSI_PHY_REFGEN_TIMEOUT_MS;
+ uint32_t refgen = 0;
+ enum cb_err ret = CB_SUCCESS;
+
+ while (!refgen) {
+ refgen = (read32(&dsi0_phy->phy_cmn_phy_status) & 0x1);
+ if (!refgen) {
+ udelay(100);
+ timeout--;
+ if (!timeout) {
+ /* timeout while polling the lock status */
+ ret = CB_ERR;
+ break;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static enum cb_err mdss_dsi_phy_commit(void)
+{
+ enum cb_err ret = CB_SUCCESS;
+
+ ret = dsi_phy_waitforrefgen();
+ if (ret) {
+ printk(BIOS_ERR, "%s: waitforrefgen error\n", __func__);
+ return ret;
+ }
+
+ mdss_dsi_power_down();
+
+ /* Remove PLL, DIG and all lanes from pwrdn */
+ write32(&dsi0_phy->phy_cmn_ctrl0, 0x7F);
+
+ /* Lane enable */
+ write32(&dsi0_phy->phy_cmn_dsi_lane_ctrl0, 0x1F);
+
+ mdss_dsi_phy_setup_lanephy(DSI_LANEID_0);
+ mdss_dsi_phy_setup_lanephy(DSI_LANEID_1);
+ mdss_dsi_phy_setup_lanephy(DSI_LANEID_2);
+ mdss_dsi_phy_setup_lanephy(DSI_LANEID_3);
+ mdss_dsi_phy_setup_lanephy(DSI_LANEID_CLK);
+
+ return ret;
+}
+
+static void mdss_dsi_phy_setup(void)
+{
+ /* First reset phy */
+ mdss_dsi_phy_reset();
+
+ /* commit phy settings */
+ mdss_dsi_phy_commit();
+}
+
+static void dsi_phy_resync_fifo(void)
+{
+ /* Resync FIFO*/
+ write32(&dsi0_phy->phy_cmn_rbuf_ctrl, 0x1);
+}
+
+static void dsi_phy_pll_global_clk_enable(bool enable)
+{
+ uint32_t clk_cfg = read32(&dsi0_phy->phy_cmn_clk_cfg1);
+ uint32_t clk_enable = 0;
+
+ /* Set CLK_EN */
+ if (enable)
+ clk_enable = 1;
+
+ clk_cfg &= ~0x20;
+ clk_cfg |= ((clk_enable << 0x5) & 0x20);
+
+ /* clk cfg1 */
+ write32(&dsi0_phy->phy_cmn_clk_cfg1, clk_cfg);
+}
+
+static enum cb_err dsi_phy_pll_lock_detect(void)
+{
+ enum cb_err ret = CB_SUCCESS;
+
+ /* Enable PLL */
+ write32(&dsi0_phy->phy_cmn_pll_ctrl, 0x1);
+
+ /* Wait for Lock */
+ if (!wait_us(15000, read32(&phy_pll_qlink->pll_common_status_one) & 0x1)) {
+ /* timeout while polling the lock status */
+ ret = CB_ERR;
+ printk(BIOS_ERR, "dsi pll lock detect timedout, error.\n");
+ }
+
+ return ret;
+}
+
+static void dsi_phy_toggle_dln3_tx_dctrl(void)
+{
+ uint32_t reg_val = 0;
+
+ reg_val = read32(&dsi0_phy->phy_ln_regs[DSI_LANEID_3].dln0_tx_dctrl);
+
+ /* clear bit 0 and keep all other bits including bit 2 */
+ reg_val &= ~0x01;
+
+ /* toggle bit 0 */
+ write32(&dsi0_phy->phy_ln_regs[DSI_LANEID_3].dln0_tx_dctrl, (0x01 | reg_val));
+ write32(&dsi0_phy->phy_ln_regs[DSI_LANEID_3].dln0_tx_dctrl, 0x4);
+}
+
+static void dsi_phy_pll_set_source(void)
+{
+ uint32_t clk_cfg = read32(&dsi0_phy->phy_cmn_clk_cfg1);
+ uint32_t dsi_clksel = 1;
+
+ clk_cfg &= ~0x03;
+ clk_cfg |= ((dsi_clksel) & 0x3);
+
+ /* clk cfg1 */
+ write32(&dsi0_phy->phy_cmn_clk_cfg1, clk_cfg);
+}
+
+static void dsi_phy_pll_bias_enable(bool enable)
+{
+ uint32_t reg_val = 0;
+
+ /* Set BIAS_EN_MUX, BIAS_EN */
+ if (enable)
+ reg_val = (0x01 << 6) | (0x01 << 7);
+
+ /* pll system muxes */
+ write32(&phy_pll_qlink->pll_system_muxes, reg_val);
+
+}
+
+static void dsi_phy_mnd_divider(struct dsi_phy_configtype *phy_cfg)
+{
+ uint32_t m_val = 1;
+ uint32_t n_val = 1;
+
+ if (phy_cfg->bits_per_pixel == 18) {
+ switch (phy_cfg->num_data_lanes) {
+ case 1:
+ case 2:
+ m_val = 2;
+ n_val = 3;
+ break;
+ case 4:
+ m_val = 4;
+ n_val = 9;
+ break;
+ default:
+ break;
+ }
+ } else if ((phy_cfg->bits_per_pixel == 16) &&
+ (phy_cfg->num_data_lanes == 3)) {
+ m_val = 3;
+ n_val = 8;
+ } else if ((phy_cfg->bits_per_pixel == 30) &&
+ (phy_cfg->num_data_lanes == 4)) {
+ m_val = 2;
+ n_val = 3;
+ }
+
+ /*Save M/N info */
+ phy_cfg->pclk_divnumerator = m_val;
+ phy_cfg->pclk_divdenominator = n_val;
+}
+
+static uint32_t dsi_phy_dsiclk_divider(struct dsi_phy_configtype *phy_cfg)
+{
+ uint32_t m_val = phy_cfg->pclk_divnumerator;
+ uint32_t n_val = phy_cfg->pclk_divdenominator;
+ uint32_t div_ctrl = 0;
+
+ div_ctrl = (m_val * phy_cfg->bits_per_pixel) /
+ (n_val * phy_cfg->num_data_lanes * 2);
+
+ return div_ctrl;
+}
+
+
+static unsigned long dsi_phy_calc_clk_divider(struct dsi_phy_configtype *phy_cfg)
+{
+ bool div_found = false;
+ uint32_t m_val = 1;
+ uint32_t n_val = 1;
+ uint32_t div_ctrl = 0;
+ uint32_t reg_val = 0;
+ uint32_t pll_post_div = 0;
+ uint32_t phy_post_div = 0;
+ uint64_t vco_freq_hz = 0;
+ uint64_t fval = 0;
+ uint64_t pll_output_freq_hz;
+ uint64_t desired_bitclk_hz;
+ uint64_t min_vco_freq_hz = 0;
+ uint32_t lut_max;
+ int i;
+ struct dsi_phy_divider_lut_entry_type *lut;
+
+ /* use 1000Mhz */
+ min_vco_freq_hz = (HAL_DSI_PLL_VCO_MIN_MHZ_2_2_0 * 1000000);
+
+ dsi_phy_mnd_divider(phy_cfg);
+
+ m_val = phy_cfg->pclk_divnumerator;
+ n_val = phy_cfg->pclk_divdenominator;
+
+ /* Desired clock in MHz */
+ desired_bitclk_hz = (uint64_t)phy_cfg->desired_bitclk_freq;
+
+ /* D Phy */
+ lut = pll_dividerlut_dphy;
+ lut_max = sizeof(pll_dividerlut_dphy) / sizeof(*lut);
+ lut += (lut_max - 1);
+
+ /* PLL Post Div - from LUT
+ * Check the LUT in reverse order
+ */
+ for (i = lut_max - 1; i >= 0; i--, lut--) {
+ fval = (uint64_t)lut->phy_post_div *
+ (uint64_t)lut->pll_post_div;
+ if (fval) {
+ if ((desired_bitclk_hz * fval) > min_vco_freq_hz) {
+ /* Range found */
+ pll_post_div = lut->pll_post_div;
+ phy_post_div = lut->phy_post_div;
+ div_found = true;
+ break;
+ }
+ }
+ }
+
+ if (div_found) {
+ phy_cfg->pll_post_div = pll_post_div;
+ phy_cfg->phy_post_div = phy_post_div;
+
+ /*div_ctrl_7_4 */
+ div_ctrl = dsi_phy_dsiclk_divider(phy_cfg);
+
+ /* DIV_CTRL_7_4 DIV_CTRL_3_0
+ * (DIV_CTRL_3_0 = PHY post divider ratio)
+ */
+ reg_val = (div_ctrl << 0x04) & 0xf0;
+ reg_val |= (phy_post_div & 0x0f);
+ write32(&dsi0_phy->phy_cmn_clk_cfg0, reg_val);
+
+ /* PLL output frequency = desired_bitclk_hz * phy_post_div */
+ pll_output_freq_hz = desired_bitclk_hz * phy_post_div;
+
+ /* VCO output freq*/
+ vco_freq_hz = pll_output_freq_hz * pll_post_div;
+
+ }
+
+ return (unsigned long)vco_freq_hz;
+}
+
+static void dsi_phy_pll_outputdiv_rate(struct dsi_phy_configtype *pll_cfg)
+{
+ /* Output divider */
+ uint32_t pll_post_div = 0;
+ uint32_t reg_val = 0;
+
+ pll_post_div = log2(pll_cfg->pll_post_div);
+ reg_val = pll_post_div & 0x3;
+ write32(&phy_pll_qlink->pll_outdiv_rate, reg_val);
+}
+
+static enum cb_err dsi_phy_pll_calcandcommit(struct dsi_phy_configtype *phy_cfg)
+{
+ unsigned long vco_freq_hz;
+ enum cb_err ret = CB_SUCCESS;
+
+ /* validate input parameters */
+ if (!phy_cfg) {
+ return CB_ERR;
+ } else if ((phy_cfg->bits_per_pixel != 16) &&
+ (phy_cfg->bits_per_pixel != 18) &&
+ (phy_cfg->bits_per_pixel != 24)) {
+ /* Unsupported pixel bit depth */
+ return CB_ERR;
+ } else if ((phy_cfg->num_data_lanes == 0) ||
+ (phy_cfg->num_data_lanes > 4)) {
+ /* Illegal number of DSI data lanes */
+ return CB_ERR;
+ }
+
+ vco_freq_hz = dsi_phy_calc_clk_divider(phy_cfg);
+ if (!vco_freq_hz) {
+ /* bitclock too low - unsupported */
+ printk(BIOS_ERR, "vco_freq_hz is 0, unsupported\n");
+ return CB_ERR;
+ }
+
+ /* Enable PLL bias */
+ dsi_phy_pll_bias_enable(true);
+
+ /* Set byte clk source */
+ dsi_phy_pll_set_source();
+
+ dsi_phy_pll_outputdiv_rate(phy_cfg);
+ dsi_phy_pll_vco_10nm_set_rate(vco_freq_hz);
+ dsi_phy_toggle_dln3_tx_dctrl();
+
+ /* Steps 6,7 Start PLL & Lock */
+ if (ret == CB_SUCCESS)
+ ret = dsi_phy_pll_lock_detect();
+
+ /* Step 8 - Resync Data Paths */
+ if (ret == CB_SUCCESS) {
+ /* Global clock enable */
+ dsi_phy_pll_global_clk_enable(true);
+
+ /* Resync FIFOs */
+ dsi_phy_resync_fifo();
+ }
+
+ return ret;
+}
+
+static uint32_t dsi_calc_desired_bitclk(struct edid *edid, uint32_t num_lines, uint32_t bpp)
+{
+ uint64_t desired_bclk = 0;
+ uint32_t pixel_clock_in_hz;
+
+ pixel_clock_in_hz = edid->mode.pixel_clock * KHz;
+ if (num_lines) {
+ desired_bclk = pixel_clock_in_hz * (uint64_t)bpp;
+ desired_bclk = desired_bclk/(uint64_t)(num_lines);
+ }
+
+ printk(BIOS_INFO, "Desired bitclock: %uHz\n", (uint32_t)desired_bclk);
+ return (uint32_t)desired_bclk;
+}
+
+static enum cb_err mdss_dsi_phy_pll_setup(struct edid *edid,
+ uint32_t num_of_lanes, uint32_t bpp)
+{
+ struct dsi_phy_configtype phy_cfg;
+ struct msm_dsi_phy_ctrl phy_timings;
+ enum cb_err ret;
+
+ /* Setup the PhyStructure */
+ memset(&phy_cfg, 0, sizeof(struct dsi_phy_configtype));
+ memset(&phy_timings, 0, sizeof(struct msm_dsi_phy_ctrl));
+
+ phy_cfg.bits_per_pixel = bpp;
+ phy_cfg.num_data_lanes = num_of_lanes;
+
+ /* desired DSI PLL bit clk freq in Hz */
+ phy_cfg.desired_bitclk_freq = dsi_calc_desired_bitclk(edid, num_of_lanes, bpp);
+
+ ret = dsi_phy_pll_calcandcommit(&phy_cfg);
+ if (ret)
+ return ret;
+ mdss_dsi_calculate_phy_timings(&phy_timings, &phy_cfg);
+ ret = mdss_dsi_phy_timings(&phy_timings);
+
+ return ret;
+}
+
+static enum cb_err enable_dsi_clk(void)
+{
+ enum cb_err ret;
+ uint32_t i = 0;
+ struct mdp_external_clock_entry clks[] = {
+ {.clk_type = MDSS_CLK_ESC0, .clk_secondary_source = 1},
+ {.clk_type = MDSS_CLK_PCLK0, .clk_source = 1},
+ {.clk_type = MDSS_CLK_BYTE0, .clk_source = 1},
+ {.clk_type = MDSS_CLK_BYTE0_INTF, .clk_source = 1,
+ .clk_div = 2, .source_div = 2},
+ };
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ /* Set Ext Source */
+ ret = mdss_clock_configure(clks[i].clk_type,
+ clks[i].clk_source,
+ clks[i].clk_div,
+ clks[i].clk_pll_m,
+ clks[i].clk_pll_n,
+ clks[i].clk_pll_2d);
+ if (ret) {
+ printk(BIOS_ERR,
+ "mdss_clock_configure failed for %u\n",
+ clks[i].clk_type);
+ return CB_ERR;
+ }
+
+ ret = mdss_clock_enable(clks[i].clk_type);
+ if (ret) {
+ printk(BIOS_ERR,
+ "mdss_clock_enable failed for %u\n",
+ clks[i].clk_type);
+ return CB_ERR;
+ }
+ }
+
+ return ret;
+}
+
+enum cb_err mdss_dsi_phy_10nm_init(struct edid *edid, uint32_t num_of_lanes, uint32_t bpp)
+{
+ enum cb_err ret;
+
+ /* Phy set up */
+ mdss_dsi_phy_setup();
+ ret = mdss_dsi_phy_pll_setup(edid, num_of_lanes, bpp);
+ enable_dsi_clk();
+
+ return ret;
+}