Add bd82x6x mainboards ASPM overrides.
The Intel PCH can override the ASPM settings via the MPC2 register.
Add a chip override for F0-F7. Mainboards may implement this as
needed.
This also fixes the final PM setup being done too early. It was
being done prior to the PCIe ASPM setup, which happens in the
bridge scan.
Change-Id: Idf2d2374899873fc6b1a2b00abdb683ea9f5bd6b
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/1796
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/southbridge/intel/bd82x6x/chip.h b/src/southbridge/intel/bd82x6x/chip.h
index 05eeab2..092a8f1 100644
--- a/src/southbridge/intel/bd82x6x/chip.h
+++ b/src/southbridge/intel/bd82x6x/chip.h
@@ -77,6 +77,16 @@
/* Enable linear PCIe Root Port function numbers starting at zero */
uint8_t pcie_port_coalesce;
+
+ /* Override PCIe ASPM */
+ uint8_t pcie_aspm_f0;
+ uint8_t pcie_aspm_f1;
+ uint8_t pcie_aspm_f2;
+ uint8_t pcie_aspm_f3;
+ uint8_t pcie_aspm_f4;
+ uint8_t pcie_aspm_f5;
+ uint8_t pcie_aspm_f6;
+ uint8_t pcie_aspm_f7;
};
#endif /* SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H */
diff --git a/src/southbridge/intel/bd82x6x/pcie.c b/src/southbridge/intel/bd82x6x/pcie.c
index 00d1de2..6ae197a 100644
--- a/src/southbridge/intel/bd82x6x/pcie.c
+++ b/src/southbridge/intel/bd82x6x/pcie.c
@@ -134,7 +134,8 @@
static void pch_pcie_pm_late(struct device *dev)
{
- enum aspm_type apmc;
+ struct southbridge_intel_bd82x6x_config *config = dev->chip_info;
+ enum aspm_type apmc = 0;
u32 reg32;
/* Set 0x314 = 0x743a361b */
@@ -168,8 +169,42 @@
reg32 |= (1 << 1);
pci_write_config32(dev, 0xd4, reg32);
- /* Get configured ASPM state */
- apmc = pci_read_config32(dev, 0x50) & 3;
+ /* Check for a rootport ASPM override */
+ switch (PCI_FUNC(dev->path.pci.devfn)) {
+ case 0:
+ apmc = config->pcie_aspm_f0;
+ break;
+ case 1:
+ apmc = config->pcie_aspm_f1;
+ break;
+ case 2:
+ apmc = config->pcie_aspm_f2;
+ break;
+ case 3:
+ apmc = config->pcie_aspm_f3;
+ break;
+ case 4:
+ apmc = config->pcie_aspm_f4;
+ break;
+ case 5:
+ apmc = config->pcie_aspm_f5;
+ break;
+ case 6:
+ apmc = config->pcie_aspm_f6;
+ break;
+ case 7:
+ apmc = config->pcie_aspm_f7;
+ break;
+ }
+
+ /* Setup the override or get the real ASPM setting */
+ if (apmc) {
+ reg32 = pci_read_config32(dev, 0xd4);
+ reg32 |= (apmc << 2) | (1 << 4);
+ pci_write_config32(dev, 0xd4, reg32);
+ } else {
+ apmc = pci_read_config32(dev, 0x50) & 3;
+ }
/* If both L0s and L1 enabled then set root port 0xE8[1]=1 */
if (apmc == PCIE_ASPM_BOTH) {
@@ -220,9 +255,6 @@
reg16 = pci_read_config16(dev, 0x1e);
//reg16 |= 0xf900;
pci_write_config16(dev, 0x1e, reg16);
-
- /* Power Management init after enumeration */
- pch_pcie_pm_late(dev);
}
static void pch_pcie_enable(device_t dev)
@@ -231,6 +263,19 @@
pch_pcie_pm_early(dev);
}
+static unsigned int pch_pciexp_scan_bridge(device_t dev, unsigned int max)
+{
+ unsigned int ret;
+
+ /* Normal PCIe Scan */
+ ret = pciexp_scan_bridge(dev, max);
+
+ /* Late Power Management init after bridge device enumeration */
+ pch_pcie_pm_late(dev);
+
+ return ret;
+}
+
static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
/* NOTE: This is not the default position! */
@@ -253,7 +298,7 @@
.enable_resources = pci_bus_enable_resources,
.init = pci_init,
.enable = pch_pcie_enable,
- .scan_bus = pciexp_scan_bridge,
+ .scan_bus = pch_pciexp_scan_bridge,
.ops_pci = &pci_ops,
};