blob: f86d8a01e448e282ffc87e0918354056bc13d103 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include "pch.h"
static void pci_init(struct device *dev)
{
u16 reg16;
u8 reg8;
printk(BIOS_DEBUG, "PCI init.\n");
/* Enable Bus Master */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 |= PCI_COMMAND_MASTER;
pci_write_config16(dev, PCI_COMMAND, reg16);
/* This device has no interrupt */
pci_write_config8(dev, INTR, 0xff);
/* disable parity error response and SERR */
reg16 = pci_read_config16(dev, BCTRL);
reg16 &= ~(1 << 0);
reg16 &= ~(1 << 1);
pci_write_config16(dev, BCTRL, reg16);
/* Master Latency Count must be set to 0x04! */
reg8 = pci_read_config8(dev, SMLT);
reg8 &= 0x07;
reg8 |= (0x04 << 3);
pci_write_config8(dev, SMLT, reg8);
/* Will this improve throughput of bus masters? */
pci_write_config8(dev, PCI_MIN_GNT, 0x06);
/* Clear errors in status registers */
reg16 = pci_read_config16(dev, PSTS);
//reg16 |= 0xf900;
pci_write_config16(dev, PSTS, reg16);
reg16 = pci_read_config16(dev, SECSTS);
// reg16 |= 0xf900;
pci_write_config16(dev, SECSTS, reg16);
}
static void ich_pci_dev_enable_resources(struct device *dev)
{
const struct pci_operations *ops;
uint16_t command;
/* Set the subsystem vendor and device id for mainboard devices */
ops = ops_pci(dev);
if (dev->on_mainboard && ops && ops->set_subsystem) {
printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n",
dev_path(dev),
CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
ops->set_subsystem(dev,
CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
}
command = pci_read_config16(dev, PCI_COMMAND);
command |= dev->command;
printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command);
pci_write_config16(dev, PCI_COMMAND, command);
}
static void ich_pci_bus_enable_resources(struct device *dev)
{
uint16_t ctrl;
/* enable IO in command register if there is VGA card
* connected with (even it does not claim IO resource)
*/
if (dev->link_list->bridge_ctrl & PCI_BRIDGE_CTL_VGA)
dev->command |= PCI_COMMAND_IO;
ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
ctrl |= dev->link_list->bridge_ctrl;
ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */
printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
/* This is the reason we need our own pci_bus_enable_resources */
ich_pci_dev_enable_resources(dev);
}
static void set_subsystem(struct device *dev, unsigned vendor, unsigned device)
{
/* NOTE: This is not the default position! */
if (!vendor || !device) {
pci_write_config32(dev, 0x54,
pci_read_config32(dev, PCI_VENDOR_ID));
} else {
pci_write_config32(dev, 0x54,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
}
static struct pci_operations pci_ops = {
.set_subsystem = set_subsystem,
};
static struct device_operations device_ops = {
.read_resources = pci_bus_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = ich_pci_bus_enable_resources,
.init = pci_init,
.scan_bus = pci_scan_bridge,
.ops_pci = &pci_ops,
};
static const struct pci_driver pch_pci __pci_driver = {
.ops = &device_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2448,
};