blob: d5721e6e0a0b0a323feac83077beb99a9dbc7a25 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
#include <delay.h>
#include <device/azalia_device.h>
#include "pch.h"
#define HDA_ICII_REG 0x68
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
typedef struct southbridge_intel_bd82x6x_config config_t;
static int set_bits(void *port, u32 mask, u32 val)
{
u32 reg32;
int count;
/* Write (val & mask) to port */
val &= mask;
reg32 = read32(port);
reg32 &= ~mask;
reg32 |= val;
write32(port, reg32);
/* Wait for readback of register to
* match what was just written to it
*/
count = 50;
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
reg32 = read32(port);
reg32 &= mask;
} while ((reg32 != val) && --count);
/* Timeout occurred */
if (!count)
return -1;
return 0;
}
static int codec_detect(u8 *base)
{
u8 reg8;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
if (set_bits(base + 0x08, 1, 1) == -1)
goto no_codec;
/* Write back the value once reset bit is set. */
write16(base + 0x0,
read16(base + 0x0));
/* Read in Codec location (BAR + 0xe)[2..0]*/
reg8 = read8(base + 0xe);
reg8 &= 0x0f;
if (!reg8)
goto no_codec;
return reg8;
no_codec:
/* Codec Not found */
/* Put HDA back in reset (BAR + 0x8) [0] */
set_bits(base + 0x08, 1, 0);
printk(BIOS_DEBUG, "Azalia: No codec!\n");
return 0;
}
static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
{
int idx=0;
while (idx < (cim_verb_data_size / sizeof(u32))) {
u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32
if (cim_verb_data[idx] != viddid) {
idx += verb_size + 3; // skip verb + header
continue;
}
*verb = &cim_verb_data[idx+3];
return verb_size;
}
/* Not all codecs need to load another verb */
return 0;
}
/**
* Wait 50usec for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
static int wait_for_ready(u8 *base)
{
/* Use a 1msec timeout */
int timeout = 1000;
while (timeout--) {
u32 reg32 = read32(base + HDA_ICII_REG);
if (!(reg32 & HDA_ICII_BUSY))
return 0;
udelay(1);
}
return -1;
}
/**
* Wait 50usec for the codec to indicate that it accepted
* the previous command. No response would imply that the code
* is non-operative
*/
static int wait_for_valid(u8 *base)
{
u32 reg32;
/* Send the verb to the codec */
reg32 = read32(base + HDA_ICII_REG);
reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
write32(base + HDA_ICII_REG, reg32);
/* Use a 1msec timeout */
int timeout = 1000;
while (timeout--) {
reg32 = read32(base + HDA_ICII_REG);
if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
udelay(1);
}
return -1;
}
static void codec_init(struct device *dev, u8 *base, int addr)
{
u32 reg32;
const u32 *verb;
u32 verb_size;
int i;
printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
/* 1 */
if (wait_for_ready(base) == -1) {
printk(BIOS_DEBUG, " codec not ready.\n");
return;
}
reg32 = (addr << 28) | 0x000f0000;
write32(base + 0x60, reg32);
if (wait_for_valid(base) == -1) {
printk(BIOS_DEBUG, " codec not valid.\n");
return;
}
reg32 = read32(base + 0x64);
/* 2 */
printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
verb_size = find_verb(dev, reg32, &verb);
if (!verb_size) {
printk(BIOS_DEBUG, "Azalia: No verb!\n");
return;
}
printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
/* 3 */
for (i = 0; i < verb_size; i++) {
if (wait_for_ready(base) == -1)
return;
write32(base + 0x60, verb[i]);
if (wait_for_valid(base) == -1)
return;
}
printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
}
static void codecs_init(struct device *dev, u8 *base, u32 codec_mask)
{
int i;
for (i = 3; i >= 0; i--) {
if (codec_mask & (1 << i))
codec_init(dev, base, i);
}
for (i = 0; i < pc_beep_verbs_size; i++) {
if (wait_for_ready(base) == -1)
return;
write32(base + 0x60, pc_beep_verbs[i]);
if (wait_for_valid(base) == -1)
return;
}
}
static void azalia_init(struct device *dev)
{
u8 *base;
struct resource *res;
u32 codec_mask;
u8 reg8;
u16 reg16;
u32 reg32;
/* Find base address */
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (!res)
return;
// NOTE this will break as soon as the Azalia get's a bar above
// 4G. Is there anything we can do about it?
base = res2mmio(res, 0, 0);
printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
if (RCBA32(0x2030) & (1 << 31)) {
reg32 = pci_read_config32(dev, 0x120);
reg32 &= 0xf8ffff01;
reg32 |= (1 << 24); // 2 << 24 for server
reg32 |= RCBA32(0x2030) & 0xfe;
pci_write_config32(dev, 0x120, reg32);
reg16 = pci_read_config16(dev, 0x78);
reg16 |= (1 << 11);
pci_write_config16(dev, 0x78, reg16);
} else
printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
reg32 = pci_read_config32(dev, 0x114);
reg32 &= ~0xfe;
pci_write_config32(dev, 0x114, reg32);
// Set VCi enable bit
reg32 = pci_read_config32(dev, 0x120);
reg32 |= (1 << 31);
pci_write_config32(dev, 0x120, reg32);
// Enable HDMI codec:
reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 1);
pci_write_config32(dev, 0xc4, reg32);
reg8 = pci_read_config8(dev, 0x43);
reg8 |= (1 << 6);
pci_write_config8(dev, 0x43, reg8);
/* Additional programming steps */
reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 13);
pci_write_config32(dev, 0xc4, reg32);
reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 10);
pci_write_config32(dev, 0xc4, reg32);
reg32 = pci_read_config32(dev, 0xd0);
reg32 &= ~(1 << 31);
pci_write_config32(dev, 0xd0, reg32);
if (dev->device == 0x1e20) {
/* Additional step on Panther Point */
reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 17);
pci_write_config32(dev, 0xc4, reg32);
}
/* Set Bus Master */
reg32 = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
pci_write_config8(dev, 0x3c, 0x0a); // unused?
/* Codec Initialization Programming Sequence */
/* Take controller out of reset */
reg32 = read32(base + 0x08);
reg32 |= (1 << 0);
write32(base + 0x08, reg32);
/* Wait 1ms */
udelay(1000);
//
reg8 = pci_read_config8(dev, 0x40); // Audio Control
reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
pci_write_config8(dev, 0x40, reg8);
reg8 = pci_read_config8(dev, 0x4d); // Docking Status
reg8 &= ~(1 << 7); // Docking not supported
pci_write_config8(dev, 0x4d, reg8);
codec_mask = codec_detect(base);
if (codec_mask) {
printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
codecs_init(dev, base, codec_mask);
}
/* Enable dynamic clock gating */
reg8 = pci_read_config8(dev, 0x43);
reg8 &= ~0x7;
reg8 |= (1 << 2) | (1 << 0);
pci_write_config8(dev, 0x43, reg8);
}
static const char *azalia_acpi_name(const struct device *dev)
{
return "HDEF";
}
static void azalia_set_subsystem(struct device *dev, unsigned vendor,
unsigned device)
{
if (!vendor || !device) {
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
pci_read_config32(dev, PCI_VENDOR_ID));
} else {
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
}
static struct pci_operations azalia_pci_ops = {
.set_subsystem = azalia_set_subsystem,
};
static struct device_operations azalia_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = azalia_init,
.scan_bus = 0,
.ops_pci = &azalia_pci_ops,
.acpi_name = azalia_acpi_name,
};
static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0 };
static const struct pci_driver pch_azalia __pci_driver = {
.ops = &azalia_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};