blob: 268298fb4cf5942a582507f9fb3f48b3901885a2 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
// Intel SMBus Controller 0:1f.3
Device (SBUS)
{
Name (_ADR, 0x001f0003)
#ifdef ENABLE_SMBUS_METHODS
OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
Field(SMBP, DWordAcc, NoLock, Preserve)
{
Offset(0x40),
, 2,
I2CE, 1
}
OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20)
Field (SMBI, ByteAcc, NoLock, Preserve)
{
HSTS, 8, // Host Status
, 8,
HCNT, 8, // Host Control
HCMD, 8, // Host Command
TXSA, 8, // Transmit Slave Address
DAT0, 8, // Host Data 0
DAT1, 8, // Host Data 1
HBDB, 8, // Host Block Data Byte
PECK, 8, // Packet Error Check
RXSA, 8, // Receive Slave Address
RXDA, 16, // Receive Slave Data
AUXS, 8, // Auxiliary Status
AUXC, 8, // Auxiliary Control
SLPC, 8, // SMLink Pin Control
SBPC, 8, // SMBus Pin Control
SSTS, 8, // Slave Status
SCMD, 8, // Slave Command
NADR, 8, // Notify Device Address
NDLB, 8, // Notify Data Low Byte
NDLH, 8, // Notify Data High Byte
}
// Kill all SMBus communication
Method (KILL, 0, Serialized)
{
Or (HCNT, 0x02, HCNT) // Send Kill
Or (HSTS, 0xff, HSTS) // Clean Status
}
// Check if last operation completed
// return Failure = 0, Success = 1
Method (CMPL, 0, Serialized)
{
Store (4000, Local0) // Timeout 200ms in 50us steps
While (Local0) {
If (And(HSTS, 0x02)) { // Completion Status?
Return (1) // Operation Completed
} Else {
Stall (50)
Decrement (Local0)
If (LEqual(Local0, 0)) {
KILL()
}
}
}
Return (0) // Failure
}
// Wait for SMBus to become ready
Method (SRDY, 0, Serialized)
{
Store (200, Local0) // Timeout 200ms
While (Local0) {
If (And(HSTS, 0x40)) { // IN_USE?
Sleep(1) // Wait 1ms
Decrement(Local0) // timeout--
If (LEqual(Local0, 0)) {
Return (1)
}
} Else {
Store (0, Local0) // We're ready
}
}
Store (4000, Local0) // Timeout 200ms (50us * 4000)
While (Local0) {
If (And (HSTS, 0x01)) { // Host Busy?
Stall(50) // Wait 50us
Decrement(Local0) // timeout--
If (LEqual(Local0, 0)) {
KILL()
}
} Else {
Return (0) // Success
}
}
Return (1) // Failure
}
// SMBus Send Byte
// Arg0: Address
// Arg1: Data
// Return: 1 = Success, 0=Failure
Method (SSXB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0)
}
// Send Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Arg0, TXSA) // Write Address
Store (Arg1, HCMD) // Write Data
Store (0x48, HCNT) // Start + Byte Data Protocol
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (1) // Success
}
Return (0)
}
// SMBus Receive Byte
// Arg0: Address
// Return: 0xffff = Failure, Data (8bit) = Success
Method (SRXB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0xffff)
}
// Receive Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Or (Arg0, 1), TXSA) // Write Address
Store (0x44, HCNT) // Start
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (DAT0) // Success
}
Return (0xffff)
}
// SMBus Write Byte
// Arg0: Address
// Arg1: Command
// Arg2: Data
// Return: 1 = Success, 0=Failure
Method (SWRB, 3, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0)
}
// Send Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Arg0, TXSA) // Write Address
Store (Arg1, HCMD) // Write Command
Store (Arg2, DAT0) // Write Data
Store (0x48, HCNT) // Start + Byte Protocol
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (1) // Success
}
Return (0)
}
// SMBus Read Byte
// Arg0: Address
// Arg1: Command
// Return: 0xffff = Failure, Data (8bit) = Success
Method (SRDB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0xffff)
}
// Receive Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Or (Arg0, 1), TXSA) // Write Address
Store (Arg1, HCMD) // Command
Store (0x48, HCNT) // Start
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (DAT0) // Success
}
Return (0xffff)
}
#endif
}