mb/kontron/bsl6: Make use of the chipset devicetree
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic25d112a95903e77b58bda70bbcc3f08df383395
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
diff --git a/src/mainboard/kontron/bsl6/devicetree.cb b/src/mainboard/kontron/bsl6/devicetree.cb
index 1659834..08b90ce 100644
--- a/src/mainboard/kontron/bsl6/devicetree.cb
+++ b/src/mainboard/kontron/bsl6/devicetree.cb
@@ -66,10 +66,9 @@
device cpu_cluster 0 on end
device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 08.0 on end # Gaussian Mixture Model
- device pci 14.0 on # USB xHCI
+ device ref igpu on end
+ device ref gmm on end
+ device ref south_xhci on
register "usb2_ports" = "{
[0] = USB2_PORT_LONG(OC0),
[1] = USB2_PORT_LONG(OC0),
@@ -78,9 +77,9 @@
[4] = USB2_PORT_LONG(OC2), /* Debug */
}"
end
- device pci 14.2 on end # Thermal Subsystem
- device pci 16.0 on end # Management Engine Interface 1
- device pci 17.0 on # SATA
+ device ref thermal on end
+ device ref heci1 on end
+ device ref sata on
register "SataSalpSupport" = "1"
register "SataPortsEnable" = "{
[0] = 1,
@@ -88,16 +87,16 @@
[2] = 1,
}"
end
- device pci 1d.0 on # PCI Express Port 9 (COMe 0)
+ device ref pcie_rp9 on
register "PcieRpEnable[8]" = "1"
end
- device pci 1d.1 on # PCI Express Port 10 (COMe 1)
+ device ref pcie_rp10 on
register "PcieRpEnable[9]" = "1"
end
- device pci 1d.2 on # PCI Express Port 11 (COMe 2)
+ device ref pcie_rp11 on
register "PcieRpEnable[10]" = "1"
end
- device pci 1f.0 on # LPC Interface
+ device ref lpc_espi on
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# EC/kempld at 0xa80/0xa81
@@ -111,14 +110,12 @@
device generic 0.0 on end # UART #0
end
end
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.4 on # SMBus
+ device ref smbus on
chip drivers/i2c/nct7802y
device i2c 0x2e on end
end
end
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 on end # GbE
+ device ref fast_spi on end
+ device ref gbe on end
end
end