snow: Rename snow to daisy.
The name snow goes by in many places in chromeos is daisy. Snow is technically
a variant of daisy and should really be called daisy_snow, but for historical
reasons the daisy board with no variant was used instead. To make it easier to
work with within chromeos, this change renames the snow board to daisy.
Change-Id: I569b31bf417db55be91832f15271bea4bc30f163
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/183553
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 13f24d967251c18dce2a00bcea915f448c4c6aa7)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6929
Tested-by: build bot (Jenkins)
diff --git a/src/mainboard/google/daisy/mainboard.c b/src/mainboard/google/daisy/mainboard.c
new file mode 100644
index 0000000..0adadb6
--- /dev/null
+++ b/src/mainboard/google/daisy/mainboard.c
@@ -0,0 +1,364 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/i2c.h>
+#include <drivers/ti/tps65090/tps65090.h>
+#include <cbmem.h>
+#include <delay.h>
+#include <edid.h>
+#include <vbe.h>
+#include <boot/coreboot_tables.h>
+#include <arch/cache.h>
+#include <soc/samsung/exynos5250/tmu.h>
+#include <soc/samsung/exynos5250/clk.h>
+#include <soc/samsung/exynos5250/gpio.h>
+#include <soc/samsung/exynos5250/power.h>
+#include <soc/samsung/exynos5250/i2c.h>
+#include <soc/samsung/exynos5250/dp-core.h>
+#include <soc/samsung/exynos5250/dp.h>
+#include <soc/samsung/exynos5250/usb.h>
+
+#include "exynos5250.h"
+
+#define MMC0_GPIO_PIN (58)
+
+/* convenient shorthand (in MB) */
+#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20)
+#define DRAM_SIZE CONFIG_DRAM_SIZE_MB
+#define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */
+
+/* Arbitrary range of DMA memory for depthcharge's drivers */
+#define DMA_START (0x77300000)
+#define DMA_SIZE (0x00100000)
+
+static struct edid edid = {
+ .ha = 1366,
+ .va = 768,
+ .framebuffer_bits_per_pixel = 16,
+ .x_resolution = 1366,
+ .y_resolution = 768,
+ .bytes_per_line = 2 * 1366
+};
+
+/* TODO: transplanted DP stuff, clean up once we have something that works */
+static enum exynos5_gpio_pin dp_pd_l = GPIO_Y25; /* active low */
+static enum exynos5_gpio_pin dp_rst_l = GPIO_X15; /* active low */
+static enum exynos5_gpio_pin dp_hpd = GPIO_X07; /* active high */
+
+static void exynos_dp_bridge_setup(void)
+{
+ exynos_pinmux_dphpd();
+
+ gpio_set_value(dp_pd_l, 1);
+ gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT);
+ gpio_set_pull(dp_pd_l, GPIO_PULL_NONE);
+
+ gpio_set_value(dp_rst_l, 0);
+ gpio_cfg_pin(dp_rst_l, GPIO_OUTPUT);
+ gpio_set_pull(dp_rst_l, GPIO_PULL_NONE);
+ udelay(10);
+ gpio_set_value(dp_rst_l, 1);
+}
+
+static void exynos_dp_bridge_init(void)
+{
+ /* De-assert PD (and possibly RST) to power up the bridge */
+ gpio_set_value(dp_pd_l, 1);
+ gpio_set_value(dp_rst_l, 1);
+
+ /*
+ * We need to wait for 90ms after bringing up the bridge since
+ * there is a phantom "high" on the HPD chip during its
+ * bootup. The phantom high comes within 7ms of de-asserting
+ * PD and persists for at least 15ms. The real high comes
+ * roughly 50ms after PD is de-asserted. The phantom high
+ * makes it hard for us to know when the NXP chip is up.
+ */
+ udelay(90000);
+}
+
+static int exynos_dp_hotplug(void)
+{
+ /* Check HPD. If it's high, we're all good. */
+ return gpio_get_value(dp_hpd) ? 0 : 1;
+}
+
+static void exynos_dp_reset(void)
+{
+ gpio_set_value(dp_pd_l, 0);
+ gpio_set_value(dp_rst_l, 0);
+ /* paranoid delay period (300ms) */
+ udelay(300 * 1000);
+}
+
+/*
+ * This delay is T3 in the LCD timing spec (defined as >200ms). We set
+ * this down to 60ms since that's the approximate maximum amount of time
+ * it'll take a bridge to start outputting LVDS data. The delay of
+ * >200ms is just a conservative value to avoid turning on the backlight
+ * when there's random LCD data on the screen. Shaving 140ms off the
+ * boot is an acceptable trade-off.
+ */
+#define LCD_T3_DELAY_MS 60
+
+#define LCD_T5_DELAY_MS 10
+#define LCD_T6_DELAY_MS 10
+
+static void backlight_pwm(void)
+{
+ /*Configure backlight PWM as a simple output high (100% brightness) */
+ gpio_direction_output(GPIO_B20, 1);
+ udelay(LCD_T6_DELAY_MS * 1000);
+}
+
+static void backlight_en(void)
+{
+ /* Configure GPIO for LCD_BL_EN */
+ gpio_direction_output(GPIO_X30, 1);
+}
+
+#define TPS65090_BUS 4 /* Daisy-specific */
+
+#define FET1_CTRL 0x0f
+#define FET4_CTRL 0x12
+#define FET6_CTRL 0x14
+
+static void lcd_vdd(void)
+{
+ /* Enable FET6, lcd panel */
+ tps65090_fet_enable(TPS65090_BUS, FET6_CTRL);
+}
+
+static void backlight_vdd(void)
+{
+ /* Enable FET1, backlight */
+ tps65090_fet_enable(TPS65090_BUS, FET1_CTRL);
+ udelay(LCD_T5_DELAY_MS * 1000);
+}
+
+static void sdmmc_vdd(void)
+{
+ /* Enable FET4, P3.3V_SDCARD */
+ tps65090_fet_enable(TPS65090_BUS, FET4_CTRL);
+}
+
+static enum exynos5_gpio_pin usb_host_vbus = GPIO_X11;
+static enum exynos5_gpio_pin usb_drd_vbus = GPIO_X27;
+/* static enum exynos5_gpio_pin hsic_reset_l = GPIO_E10; */
+
+static void prepare_usb(void)
+{
+ /* Kick this reset off early so it gets at least 100ms to settle */
+ reset_usb_drd_dwc3();
+}
+
+static void setup_usb(void)
+{
+ /* HSIC not needed in firmware on this board */
+ setup_usb_drd_phy();
+ setup_usb_drd_dwc3();
+ setup_usb_host_phy(0);
+
+ gpio_direction_output(usb_host_vbus, 1);
+ gpio_direction_output(usb_drd_vbus, 1);
+}
+
+//static struct video_info smdk5250_dp_config = {
+static struct video_info dp_video_info = {
+ /* FIXME: fix video_info struct to use const for name */
+ .name = (char *)"eDP-LVDS NXP PTN3460",
+
+ .h_sync_polarity = 0,
+ .v_sync_polarity = 0,
+ .interlaced = 0,
+
+ .color_space = COLOR_RGB,
+ .dynamic_range = VESA,
+ .ycbcr_coeff = COLOR_YCBCR601,
+ .color_depth = COLOR_8,
+
+ .link_rate = LINK_RATE_2_70GBPS,
+ .lane_count = LANE_COUNT2,
+};
+
+/* FIXME: move some place more appropriate */
+#define MAX_DP_TRIES 5
+
+/*
+ * This function disables the USB3.0 PLL to save power
+ */
+static void disable_usb30_pll(void)
+{
+ enum exynos5_gpio_pin usb3_pll_l = GPIO_Y11;
+
+ gpio_direction_output(usb3_pll_l, 0);
+}
+
+static void setup_storage(void)
+{
+ /* MMC0: Fixed, 8 bit mode, connected with GPIO. */
+ if (clock_set_mshci(PERIPH_ID_SDMMC0))
+ printk(BIOS_CRIT, "%s: Failed to set MMC0 clock.\n", __func__);
+ if (gpio_direction_output(MMC0_GPIO_PIN, 1)) {
+ printk(BIOS_CRIT, "%s: Unable to power on MMC0.\n", __func__);
+ }
+ gpio_set_pull(MMC0_GPIO_PIN, GPIO_PULL_NONE);
+ gpio_set_drv(MMC0_GPIO_PIN, GPIO_DRV_4X);
+ exynos_pinmux_sdmmc0();
+
+ /* MMC2: Removable, 4 bit mode, no GPIO. */
+ /* (Must be after romstage to avoid breaking SDMMC boot.) */
+ clock_set_mshci(PERIPH_ID_SDMMC2);
+ exynos_pinmux_sdmmc2();
+}
+
+static void gpio_init(void)
+{
+ /* Set up the I2C busses. */
+ exynos_pinmux_i2c0();
+ exynos_pinmux_i2c1();
+ exynos_pinmux_i2c2();
+ exynos_pinmux_i2c3();
+ exynos_pinmux_i2c4();
+ exynos_pinmux_i2c7();
+
+ /* Set up the GPIOs used to arbitrate for I2C bus 4. */
+ gpio_set_pull(GPIO_F03, GPIO_PULL_NONE);
+ gpio_set_pull(GPIO_E04, GPIO_PULL_NONE);
+ gpio_direction_output(GPIO_F03, 1);
+ gpio_direction_input(GPIO_E04);
+
+ /* Set up the GPIO used to enable the audio codec. */
+ gpio_set_pull(GPIO_X17, GPIO_PULL_NONE);
+ gpio_set_pull(GPIO_X15, GPIO_PULL_NONE);
+ gpio_direction_output(GPIO_X17, 1);
+ gpio_direction_output(GPIO_X15, 1);
+
+ /* Set up the I2S busses. */
+ exynos_pinmux_i2s0();
+ exynos_pinmux_i2s1();
+}
+
+/* this happens after cpu_init where exynos resources are set */
+static void mainboard_init(device_t dev)
+{
+ int dp_tries;
+ struct s5p_dp_device dp_device = {
+ .base = exynos_dp1,
+ .video_info = &dp_video_info,
+ };
+ void *fb_addr = (void *)(get_fb_base_kb() * KiB);
+
+ prepare_usb();
+ gpio_init();
+ setup_storage();
+
+ i2c_init(TPS65090_BUS, I2C_0_SPEED, I2C_SLAVE);
+ i2c_init(7, I2C_0_SPEED, I2C_SLAVE);
+
+ tmu_init(&exynos5250_tmu_info);
+
+ /* Clock Gating all the unused IP's to save power */
+ clock_gate();
+
+ /* Disable USB3.0 PLL to save 250mW of power */
+ disable_usb30_pll();
+
+ sdmmc_vdd();
+
+ set_vbe_mode_info_valid(&edid, (uintptr_t)fb_addr);
+
+ lcd_vdd();
+
+ // FIXME: should timeout
+ do {
+ udelay(50);
+ } while (!exynos_dp_hotplug());
+
+ exynos_dp_bridge_setup();
+ for (dp_tries = 1; dp_tries <= MAX_DP_TRIES; dp_tries++) {
+ exynos_dp_bridge_init();
+ if (exynos_dp_hotplug()) {
+ exynos_dp_reset();
+ continue;
+ }
+
+ if (dp_controller_init(&dp_device))
+ continue;
+
+ udelay(LCD_T3_DELAY_MS * 1000);
+
+ backlight_vdd();
+ backlight_pwm();
+ backlight_en();
+ /* if we're here, we're successful */
+ break;
+ }
+
+ if (dp_tries > MAX_DP_TRIES)
+ printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__);
+
+ setup_usb();
+
+ // Uncomment to get excessive GPIO output:
+ // gpio_info();
+}
+
+static void mainboard_enable(device_t dev)
+{
+ dev->ops->init = &mainboard_init;
+
+ /* set up dcache and MMU */
+ /* FIXME: this should happen via resource allocator */
+ exynos5250_config_l2_cache();
+ mmu_init();
+ mmu_config_range(0, DRAM_START, DCACHE_OFF);
+ mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK);
+ mmu_config_range(DMA_START >> 20, DMA_SIZE >> 20, DCACHE_OFF);
+ mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF);
+ dcache_invalidate_all();
+ dcache_mmu_enable();
+
+ const unsigned epll_hz = 192000000;
+ const unsigned sample_rate = 48000;
+ const unsigned lr_frame_size = 256;
+ clock_epll_set_rate(epll_hz);
+ clock_select_i2s_clk_source();
+ clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
+
+ power_enable_xclkout();
+}
+
+struct chip_operations mainboard_ops = {
+ .name = "Samsung/Google ARM Chromebook",
+ .enable_dev = mainboard_enable,
+};
+
+void lb_board(struct lb_header *header)
+{
+ struct lb_range *dma;
+
+ dma = (struct lb_range *)lb_new_record(header);
+ dma->tag = LB_TAB_DMA;
+ dma->size = sizeof(*dma);
+ dma->range_start = (intptr_t)DMA_START;
+ dma->range_size = DMA_SIZE;
+}