blob: 564017d4e4e681497d6161bc620f078fa4a088dd [file] [log] [blame]
* This file is part of the coreboot project.
* Copyright (C) 2007 Advanced Micro Devices, Inc.
* Copyright (C) 2009-2010 coresystems GmbH
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
#include <device/pci.h>
#include <string.h>
#include <arch/io.h>
#include <arch/registers.h>
#include <console/console.h>
#include <arch/interrupt.h>
#include <cbfs.h>
#include <delay.h>
#include <pc80/i8259.h>
#include "x86.h"
#include "vbe.h"
#include "../../src/lib/jpeg.h"
void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx,
u32 esi, u32 edi) __attribute__((regparm(0))) =
(void *)&__realmode_call;
void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx,
u32 esi, u32 edi) __attribute__((regparm(0))) =
(void *)&__realmode_interrupt;
static void setup_rombios(void)
const char date[] = "06/11/99";
memcpy((void *)0xffff5, &date, 8);
const char ident[] = "PCI_ISA";
memcpy((void *)0xfffd9, &ident, 7);
/* system model: IBM-AT */
write8(0xffffe, 0xfc);
int (*intXX_handler[256])(struct eregs *regs) = { NULL };
static int intXX_exception_handler(struct eregs *regs)
printk(BIOS_INFO, "Oops, exception %d while executing option rom\n",
x86_exception(regs); // Call coreboot exception handler
return 0; // Never really returns
static int intXX_unknown_handler(struct eregs *regs)
printk(BIOS_INFO, "Unsupported software interrupt #0x%x eax 0x%x\n",
regs->vector, regs->eax);
return -1;
/* setup interrupt handlers for mainboard */
void mainboard_interrupt_handlers(int intXX, void *intXX_func)
intXX_handler[intXX] = intXX_func;
static void setup_interrupt_handlers(void)
int i;
/* The first 16 intXX functions are not BIOS services,
* but the CPU-generated exceptions ("hardware interrupts")
for (i = 0; i < 0x10; i++)
intXX_handler[i] = &intXX_exception_handler;
/* Mark all other intXX calls as unknown first */
for (i = 0x10; i < 0x100; i++)
/* If the mainboard_interrupt_handler isn't called first.
/* Now set the default functions that are actually
* needed to initialize the option roms. This is
* very slick, as it allows us to implement mainboard
* specific interrupt handlers, such as the int15.
switch (i) {
case 0x10:
intXX_handler[0x10] = &int10_handler;
case 0x12:
intXX_handler[0x12] = &int12_handler;
case 0x16:
intXX_handler[0x16] = &int16_handler;
case 0x1a:
intXX_handler[0x1a] = &int1a_handler;
intXX_handler[i] = &intXX_unknown_handler;
static void write_idt_stub(void *target, u8 intnum)
unsigned char *codeptr;
codeptr = (unsigned char *) target;
memcpy(codeptr, &__idt_handler, (size_t)&__idt_handler_size);
codeptr[3] = intnum; /* modify int# in the code stub. */
static void setup_realmode_idt(void)
struct realmode_idt *idts = (struct realmode_idt *) 0;
int i;
/* Copy IDT stub code for each interrupt. This might seem wasteful
* but it is really simple
for (i = 0; i < 256; i++) {
idts[i].cs = 0;
idts[i].offset = 0x1000 + (i * (u32)&__idt_handler_size);
write_idt_stub((void *)((u32 )idts[i].offset), i);
/* Many option ROMs use the hard coded interrupt entry points in the
* system bios. So install them at the known locations.
/* int42 is the relocated int10 */
write_idt_stub((void *)0xff065, 0x42);
/* BIOS Int 11 Handler F000:F84D */
write_idt_stub((void *)0xff84d, 0x11);
/* BIOS Int 12 Handler F000:F841 */
write_idt_stub((void *)0xff841, 0x12);
/* BIOS Int 13 Handler F000:EC59 */
write_idt_stub((void *)0xfec59, 0x13);
/* BIOS Int 14 Handler F000:E739 */
write_idt_stub((void *)0xfe739, 0x14);
/* BIOS Int 15 Handler F000:F859 */
write_idt_stub((void *)0xff859, 0x15);
/* BIOS Int 16 Handler F000:E82E */
write_idt_stub((void *)0xfe82e, 0x16);
/* BIOS Int 17 Handler F000:EFD2 */
write_idt_stub((void *)0xfefd2, 0x17);
/* ROM BIOS Int 1A Handler F000:FE6E */
write_idt_stub((void *)0xffe6e, 0x1a);
static u8 vbe_get_mode_info(vbe_mode_info_t * mode_info)
printk(BIOS_DEBUG, "Getting information about VESA mode %04x\n",
char *buffer = (char *)&__buffer;
u16 buffer_seg = (((unsigned long)buffer) >> 4) & 0xff00;
u16 buffer_adr = ((unsigned long)buffer) & 0xffff;
realmode_interrupt(0x10, VESA_GET_MODE_INFO, 0x0000,
mode_info->video_mode, 0x0000, buffer_seg, buffer_adr);
memcpy(mode_info->mode_info_block, buffer, sizeof(vbe_mode_info_t));
return 0;
static u8 vbe_set_mode(vbe_mode_info_t * mode_info)
printk(BIOS_DEBUG, "Setting VESA mode %04x\n", mode_info->video_mode);
// request linear framebuffer mode
mode_info->video_mode |= (1 << 14);
// request clearing of framebuffer
mode_info->video_mode &= ~(1 << 15);
realmode_interrupt(0x10, VESA_SET_MODE, mode_info->video_mode,
0x0000, 0x0000, 0x0000, 0x0000);
return 0;
vbe_mode_info_t mode_info;
/* These two functions could probably even be generic between
* yabel and x86 native. TBD later.
void vbe_set_graphics(void)
mode_info.video_mode = (1 << 14) | CONFIG_FRAMEBUFFER_VESA_MODE;
unsigned char *framebuffer =
(unsigned char *)mode_info.vesa.phys_base_ptr;
printk(BIOS_DEBUG, "framebuffer: %p\n", framebuffer);
struct jpeg_decdata *decdata;
decdata = malloc(sizeof(*decdata));
unsigned char *jpeg = cbfs_find_file("bootsplash.jpg",
if (!jpeg) {
int ret = 0;
ret = jpeg_decode(jpeg, framebuffer, 1024, 768, 16, decdata);
void vbe_textmode_console(void)
realmode_interrupt(0x10, 0x0003, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000);
void fill_lb_framebuffer(struct lb_framebuffer *framebuffer)
framebuffer->physical_address = mode_info.vesa.phys_base_ptr;
framebuffer->x_resolution = le16_to_cpu(mode_info.vesa.x_resolution);
framebuffer->y_resolution = le16_to_cpu(mode_info.vesa.y_resolution);
framebuffer->bytes_per_line =
framebuffer->bits_per_pixel = mode_info.vesa.bits_per_pixel;
framebuffer->red_mask_pos = mode_info.vesa.red_mask_pos;
framebuffer->red_mask_size = mode_info.vesa.red_mask_size;
framebuffer->green_mask_pos = mode_info.vesa.green_mask_pos;
framebuffer->green_mask_size = mode_info.vesa.green_mask_size;
framebuffer->blue_mask_pos = mode_info.vesa.blue_mask_pos;
framebuffer->blue_mask_size = mode_info.vesa.blue_mask_size;
framebuffer->reserved_mask_pos = mode_info.vesa.reserved_mask_pos;
framebuffer->reserved_mask_size = mode_info.vesa.reserved_mask_size;
void run_bios(struct device *dev, unsigned long addr)
u32 num_dev = (dev->bus->secondary << 8) | dev->path.pci.devfn;
/* Setting up required hardware.
* Removing this will cause random illegal instruction exceptions
* in some option roms.
/* Set up some legacy information in the F segment */
/* Set up C interrupt handlers */
/* Set up real-mode IDT */
memcpy(REALMODE_BASE, &__realmode_code, (size_t)&__realmode_code_size);
printk(BIOS_SPEW, "Real mode stub @%p: %d bytes\n", REALMODE_BASE,
printk(BIOS_DEBUG, "Calling Option ROM...\n");
/* TODO ES:DI Pointer to System BIOS PnP Installation Check Structure */
/* Option ROM entry point is at OPROM start + 3 */
realmode_call(addr + 0x0003, num_dev, 0xffff, 0x0000, 0xffff, 0x0, 0x0);
printk(BIOS_DEBUG, "... Option ROM returned.\n");
#include <cpu/amd/lxdef.h>
#include <cpu/amd/vr.h>
#include <cbfs.h>
#define VSA2_BUFFER 0x60000
#define VSA2_ENTRY_POINT 0x60020
// TODO move to a header file.
void do_vsmbios(void);
/* VSA virtual register helper */
static u32 VSA_vrRead(u16 classIndex)
u32 eax, ebx, ecx, edx;
asm volatile (
"movw $0x0AC1C, %%dx\n"
"orl $0x0FC530000, %%eax\n"
"outl %%eax, %%dx\n"
"addb $2, %%dl\n"
"inw %%dx, %%ax\n"
: "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
: "a"(classIndex)
return eax;
void do_vsmbios(void)
printk(BIOS_DEBUG, "Preparing for VSA...\n");
/* Set up C interrupt handlers */
/* Setting up realmode IDT */
memcpy(REALMODE_BASE, &__realmode_code, (size_t)&__realmode_code_size);
printk(BIOS_SPEW, "VSA: Real mode stub @%p: %d bytes\n", REALMODE_BASE,
if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) {
printk(BIOS_ERR, "Failed to load VSA.\n");
unsigned char *buf = (unsigned char *)VSA2_BUFFER;
printk(BIOS_DEBUG, "VSA: Buffer @%p *[0k]=%02x\n", buf, buf[0]);
printk(BIOS_DEBUG, "VSA: Signature *[0x20-0x23] is %02x:%02x:%02x:%02x\n",
buf[0x20], buf[0x21], buf[0x22], buf[0x23]);
/* Check for code to emit POST code at start of VSA. */
if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) ||
(buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) {
printk(BIOS_WARNING, "VSA: Signature incorrect. Install failed.\n");
printk(BIOS_DEBUG, "Calling VSA module...\n");
/* ECX gets SMM, EDX gets SYSMEM */
realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM,
MSR_GLIU0_SYSMEM, 0x0, 0x0);
printk(BIOS_DEBUG, "... VSA module returned.\n");
/* Restart timer 1 */
outb(0x56, 0x43);
outb(0x12, 0x41);
/* Check that VSA is running OK */
printk(BIOS_DEBUG, "VSM: VSA2 VR signature verified.\n");
printk(BIOS_ERR, "VSM: VSA2 VR signature not valid. Install failed.\n");
/* interrupt_handler() is called from assembler code only,
* so there is no use in putting the prototype into a header file.
int __attribute__((regparm(0))) interrupt_handler(u32 intnumber,
u32 gsfs, u32 dses,
u32 edi, u32 esi,
u32 ebp, u32 esp,
u32 ebx, u32 edx,
u32 ecx, u32 eax,
u32 cs_ip, u16 stackflags);
int __attribute__((regparm(0))) interrupt_handler(u32 intnumber,
u32 gsfs, u32 dses,
u32 edi, u32 esi,
u32 ebp, u32 esp,
u32 ebx, u32 edx,
u32 ecx, u32 eax,
u32 cs_ip, u16 stackflags)
u32 ip;
u32 cs;
u32 flags;
int ret = -1;
struct eregs reg_info;
ip = cs_ip & 0xffff;
cs = cs_ip >> 16;
flags = stackflags;
printk(BIOS_DEBUG, "oprom: INT# 0x%x\n", intnumber);
printk(BIOS_DEBUG, "oprom: eax: %08x ebx: %08x ecx: %08x edx: %08x\n",
eax, ebx, ecx, edx);
printk(BIOS_DEBUG, "oprom: ebp: %08x esp: %08x edi: %08x esi: %08x\n",
ebp, esp, edi, esi);
printk(BIOS_DEBUG, "oprom: ip: %04x cs: %04x flags: %08x\n",
ip, cs, flags);
// Fetch arguments from the stack and put them into
// a structure that we want to pass on to our sub interrupt
// handlers.
reg_info = (struct eregs) {
.error_code=0, // ??
.eflags=flags // ??
// Call the interrupt handler for this int#
ret = intXX_handler[intnumber](&reg_info);
// Put registers back on the stack. The assembler code
// will later pop them.
// What happens here is that we force (volatile!) changing
// the values of the parameters of this function. We do this
// because we know that they stay alive on the stack after
// we leave this function. Don't say this is bollocks.
*(volatile u32 *)&eax = reg_info.eax;
*(volatile u32 *)&ecx = reg_info.ecx;
*(volatile u32 *)&edx = reg_info.edx;
*(volatile u32 *)&ebx = reg_info.ebx;
*(volatile u32 *)&esi = reg_info.esi;
*(volatile u32 *)&edi = reg_info.edi;
flags = reg_info.eflags;
/* Pass errors back to our caller via the CARRY flag */
if (ret) {
printk(BIOS_DEBUG,"int%02x call returned error.\n", intnumber);
flags |= 1; // error: set carry
flags &= ~1; // no error: clear carry
*(volatile u16 *)&stackflags = flags;
return ret;