Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an
example.
This newer version reflects the recent changes to further simplify the console
code and partly gets rid of some hacks in the previous version.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig
new file mode 100644
index 0000000..899a153
--- /dev/null
+++ b/src/drivers/oxford/oxpcie/Kconfig
@@ -0,0 +1,68 @@
+config DRIVERS_OXFORD_OXPCIE
+ bool "Oxford OXPCIe952"
+ default n
+ select HAVE_UART_MEMORY_MAPPED
+ help
+ Support for Oxford OXPCIe952 serial port PCIe cards.
+ Currently only devices with the vendor ID 0x1415 and device ID
+ 0xc158 will work.
+ NOTE: Right now you have to set the base address of your OXPCIe952
+ card to exactly the value that the device allocator would set them
+ later on, or serial console functionality will stop as soon as the
+ resource allocator assigns a new base address to the device.
+
+config OXFORD_OXPCIE_BRIDGE_BUS
+ hex "OXPCIe's PCIe bridge bus number"
+ default 0x0
+ depends on DRIVERS_OXFORD_OXPCIE
+ help
+ While coreboot is executing code from ROM, the coreboot resource
+ allocator has not been running yet. Hence PCI devices living behind
+ a bridge are not yet visible to the system. In order to use an
+ OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge
+ that controls the OXPCIe952 controller first.
+
+config OXFORD_OXPCIE_BRIDGE_DEVICE
+ hex "OXPCIe's PCIe bridge device number"
+ default 0x1c
+ depends on DRIVERS_OXFORD_OXPCIE
+ help
+ While coreboot is executing code from ROM, the coreboot resource
+ allocator has not been running yet. Hence PCI devices living behind
+ a bridge are not yet visible to the system. In order to use an
+ OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge
+ that controls the OXPCIe952 controller first.
+
+config OXFORD_OXPCIE_BRIDGE_FUNCTION
+ hex "OXPCIe's PCIe bridge function number"
+ default 0x2
+ depends on DRIVERS_OXFORD_OXPCIE
+ help
+ While coreboot is executing code from ROM, the coreboot resource
+ allocator has not been running yet. Hence PCI devices living behind
+ a bridge are not yet visible to the system. In order to use an
+ OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge
+ that controls the OXPCIe952 controller first.
+
+config OXFORD_OXPCIE_BRIDGE_SUBORDINATE
+ hex "OXPCIe's PCIe bridge subordinate bus"
+ default 0x3
+ depends on DRIVERS_OXFORD_OXPCIE
+ help
+ While coreboot is executing code from ROM, the coreboot resource
+ allocator has not been running yet. Hence PCI devices living behind
+ a bridge are not yet visible to the system. In order to use an
+ OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge
+ that controls the OXPCIe952 controller first.
+
+config OXFORD_OXPCIE_BASE_ADDRESS
+ hex "Base address for rom stage console"
+ default 0xe0400000
+ depends on DRIVERS_OXFORD_OXPCIE
+ help
+ While coreboot is executing code from ROM, the coreboot resource
+ allocator has not been running yet. Hence PCI devices living behind
+ a bridge are not yet visible to the system. In order to use an
+ OXPCIe952 based PCIe card, coreboot has to set up a temporary address
+ for the OXPCIe952 controller.
+
diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc
new file mode 100644
index 0000000..7d3a26f
--- /dev/null
+++ b/src/drivers/oxford/oxpcie/Makefile.inc
@@ -0,0 +1,3 @@
+driver-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie.c
+
+romstage-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie_early.c
diff --git a/src/drivers/oxford/oxpcie/oxpcie.c b/src/drivers/oxford/oxpcie/oxpcie.c
new file mode 100644
index 0000000..94c5b64
--- /dev/null
+++ b/src/drivers/oxford/oxpcie/oxpcie.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <uart8250.h>
+
+static void oxford_oxpcie_enable(device_t dev)
+{
+ printk(BIOS_DEBUG, "Initializing Oxford OXPCIe952\n");
+
+ struct resource *res = find_resource(dev, 0x10);
+ if (!res) {
+ printk(BIOS_WARNING, "OXPCIe952: No UART resource found.\n");
+ return;
+ }
+
+ printk(BIOS_DEBUG, "OXPCIe952: Class=%x Revision ID=%x\n",
+ (read32(res->base) >> 8), (read32(res->base) & 0xff));
+ printk(BIOS_DEBUG, "OXPCIe952: %d UARTs detected.\n",
+ (read32(res->base + 4) & 3));
+}
+
+static struct device_operations oxford_oxpcie_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = oxford_oxpcie_enable,
+ .scan_bus = 0,
+};
+
+static const struct pci_driver oxford_oxpcie_driver __pci_driver = {
+ .ops = &oxford_oxpcie_ops,
+ .vendor = 0x1415,
+ .device = 0xc158,
+};
diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c
new file mode 100644
index 0000000..235c52c
--- /dev/null
+++ b/src/drivers/oxford/oxpcie/oxpcie_early.c
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <uart8250.h>
+#include <device/pci_def.h>
+
+#define PCIE_BRIDGE \
+ PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_BUS, \
+ CONFIG_OXFORD_OXPCIE_BRIDGE_DEVICE, \
+ CONFIG_OXFORD_OXPCIE_BRIDGE_FUNCTION)
+
+#define OXPCIE_DEVICE \
+ PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 0)
+
+void oxford_init(void)
+{
+ u16 reg16;
+
+ /* First we reset the secondary bus */
+ reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL);
+ reg16 |= (1 << 6); /* SRESET */
+ pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16);
+
+ /* Assume we don't have to wait here forever */
+
+ /* Read back and clear reset bit. */
+ reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL);
+ reg16 &= ~(1 << 6); /* SRESET */
+ pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16);
+
+ /* Set up subordinate bus number */
+ pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS, 0x00);
+ pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS, 0x00);
+ pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS,
+ CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE);
+ pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS,
+ CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE);
+
+ /* Memory window for the OXPCIe952 card */
+ // XXX is the calculation of base and limit corect?
+ pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE,
+ ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) |
+ ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00)));
+
+ /* Enable memory access through bridge */
+ reg16 = pci_read_config16(PCIE_BRIDGE, PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MEMORY;
+ pci_write_config16(PCIE_BRIDGE, PCI_COMMAND, reg16);
+
+ // FIXME Add a timeout or this will hang forever if
+ // no device is in the slot.
+ u32 id = 0;
+ while ((id == 0) || (id == 0xffffffff))
+ id = pci_read_config32(OXPCIE_DEVICE, PCI_VENDOR_ID);
+
+ /* Setup base address on device */
+ pci_write_config32(OXPCIE_DEVICE, PCI_BASE_ADDRESS_0,
+ CONFIG_OXFORD_OXPCIE_BASE_ADDRESS);
+
+ /* Enable memory on device */
+ reg16 = pci_read_config16(OXPCIE_DEVICE, PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MEMORY;
+ pci_write_config16(OXPCIE_DEVICE, PCI_COMMAND, reg16);
+
+ /* Now the UART initialization */
+ u32 uart0_base = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000;
+
+ uart8250_mem_init(uart0_base, (4000000 / CONFIG_TTYS0_BAUD));
+}
+