soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers
This patch save and restore ITSS IPCx register before and after
FSP-S call.
Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/28791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c
index 9d9ca01..fb01183 100644
--- a/src/soc/intel/skylake/chip.c
+++ b/src/soc/intel/skylake/chip.c
@@ -21,19 +21,28 @@
#include <device/pci.h>
#include <fsp/util.h>
#include <intelblocks/chip.h>
+#include <intelblocks/itss.h>
#include <intelblocks/xdci.h>
#include <intelpch/lockdown.h>
#include <soc/acpi.h>
#include <soc/interrupt.h>
#include <soc/irq.h>
+#include <soc/itss.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
#include <string.h>
void soc_init_pre_device(void *chip_info)
{
+ /* Snapshot the current GPIO IRQ polarities. FSP is setting a
+ * default policy that doesn't honor boards' requirements. */
+ itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
/* Perform silicon specific init. */
intel_silicon_init();
+
+ /* Restore GPIO IRQ polarities back to previous settings. */
+ itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
}
void soc_fsp_load(void)
diff --git a/src/soc/intel/skylake/chip_fsp20.c b/src/soc/intel/skylake/chip_fsp20.c
index 039d45a..a2a430e 100644
--- a/src/soc/intel/skylake/chip_fsp20.c
+++ b/src/soc/intel/skylake/chip_fsp20.c
@@ -29,6 +29,7 @@
#include <fsp/api.h>
#include <fsp/util.h>
#include <intelblocks/chip.h>
+#include <intelblocks/itss.h>
#include <intelblocks/xdci.h>
#include <intelpch/lockdown.h>
#include <romstage_handoff.h>
@@ -37,6 +38,7 @@
#include <soc/interrupt.h>
#include <soc/iomap.h>
#include <soc/irq.h>
+#include <soc/itss.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
#include <soc/systemagent.h>
@@ -167,8 +169,16 @@
void soc_init_pre_device(void *chip_info)
{
+ /* Snapshot the current GPIO IRQ polarities. FSP is setting a
+ * default policy that doesn't honor boards' requirements. */
+ itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
/* Perform silicon specific init. */
fsp_silicon_init(romstage_handoff_is_resume());
+
+ /* Restore GPIO IRQ polarities back to previous settings. */
+ itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
/* swap enabled PCI ports in device tree if needed */
pcie_override_devicetree_after_silicon_init();
}
diff --git a/src/soc/intel/skylake/include/soc/itss.h b/src/soc/intel/skylake/include/soc/itss.h
index 5ff9bb1..e6eb8b0 100644
--- a/src/soc/intel/skylake/include/soc/itss.h
+++ b/src/soc/intel/skylake/include/soc/itss.h
@@ -16,6 +16,9 @@
#ifndef SOC_INTEL_SKL_ITSS_H
#define SOC_INTEL_SKL_ITSS_H
+#define GPIO_IRQ_START 50
+#define GPIO_IRQ_END ITSS_MAX_IRQ
+
#define ITSS_MAX_IRQ 119
#define IRQS_PER_IPC 32
#define NUM_IPC_REGS ((ITSS_MAX_IRQ + IRQS_PER_IPC - 1)/IRQS_PER_IPC)