| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2009-2010 coresystems GmbH |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| ## |
| |
| mainmenu "coreboot configuration" |
| |
| menu "General setup" |
| |
| config EXPERT |
| bool "Expert mode" |
| help |
| This allows you to select certain advanced configuration options. |
| |
| Warning: Only enable this option if you really know what you are |
| doing! You have been warned! |
| |
| config LOCALVERSION |
| string "Local version string" |
| help |
| Append an extra string to the end of the coreboot version. |
| |
| This can be useful if, for instance, you want to append the |
| respective board's hostname or some other identifying string to |
| the coreboot version number, so that you can easily distinguish |
| boot logs of different boards from each other. |
| |
| config CBFS_PREFIX |
| string "CBFS prefix to use" |
| default "fallback" |
| help |
| Select the prefix to all files put into the image. It's "fallback" |
| by default, "normal" is a common alternative. |
| |
| choice |
| prompt "Compiler to use" |
| default COMPILER_GCC |
| help |
| This option allows you to select the compiler used for building |
| coreboot. |
| |
| config COMPILER_GCC |
| bool "GCC" |
| help |
| Use the GNU Compiler Collection (GCC) to build coreboot. |
| |
| For details see http://gcc.gnu.org. |
| |
| config COMPILER_LLVM_CLANG |
| bool "LLVM/clang" |
| help |
| Use LLVM/clang to build coreboot. |
| |
| For details see http://clang.llvm.org. |
| |
| endchoice |
| |
| config SCANBUILD_ENABLE |
| bool "Build with scan-build for static code analysis" |
| default n |
| help |
| Changes the build process to use scan-build (a utility for |
| running the clang static code analyzer from the command line). |
| |
| Requires the scan-build utility in your system $PATH. |
| |
| For details see http://clang-analyzer.llvm.org/scan-build.html. |
| |
| config SCANBUILD_REPORT_LOCATION |
| string "Directory for the scan-build report(s)" |
| default "" |
| depends on SCANBUILD_ENABLE |
| help |
| Directory where the scan-build reports should be stored in. The |
| reports are stored in subdirectories of the form 'yyyy-mm-dd-*' |
| in the specified directory. |
| |
| If this setting is left empty, the coreboot top-level directory |
| will be used to store the report subdirectories. |
| |
| config CCACHE |
| bool "Use ccache to speed up (re)compilation" |
| default n |
| help |
| Enables the use of ccache for faster builds. |
| |
| Requires the ccache utility in your system $PATH. |
| |
| For details see https://ccache.samba.org. |
| |
| config SCONFIG_GENPARSER |
| bool "Generate SCONFIG parser using flex and bison" |
| default n |
| depends on EXPERT |
| help |
| Enable this option if you are working on the sconfig device tree |
| parser and made changes to sconfig.l and sconfig.y. |
| |
| Otherwise, say N. |
| |
| config USE_OPTION_TABLE |
| bool "Use CMOS for configuration values" |
| default n |
| depends on HAVE_OPTION_TABLE |
| help |
| Enable this option if coreboot shall read options from the "CMOS" |
| NVRAM instead of using hard-coded values. |
| |
| config COMPRESS_RAMSTAGE |
| bool "Compress ramstage with LZMA" |
| default y |
| help |
| Compress ramstage to save memory in the flash image. Note |
| that decompression might slow down booting if the boot flash |
| is connected through a slow link (i.e. SPI). |
| |
| config INCLUDE_CONFIG_FILE |
| bool "Include the coreboot .config file into the ROM image" |
| default y |
| help |
| Include the .config file that was used to compile coreboot |
| in the (CBFS) ROM image. This is useful if you want to know which |
| options were used to build a specific coreboot.rom image. |
| |
| Saying Y here will increase the image size by 2-3kB. |
| |
| You can use the following command to easily list the options: |
| |
| grep -a CONFIG_ coreboot.rom |
| |
| Alternatively, you can also use cbfstool to print the image |
| contents (including the raw 'config' item we're looking for). |
| |
| Example: |
| |
| $ cbfstool coreboot.rom print |
| coreboot.rom: 4096 kB, bootblocksize 1008, romsize 4194304, |
| offset 0x0 |
| Alignment: 64 bytes |
| |
| Name Offset Type Size |
| cmos_layout.bin 0x0 cmos layout 1159 |
| fallback/romstage 0x4c0 stage 339756 |
| fallback/coreboot_ram 0x53440 stage 186664 |
| fallback/payload 0x80dc0 payload 51526 |
| config 0x8d740 raw 3324 |
| (empty) 0x8e480 null 3610440 |
| |
| config EARLY_CBMEM_INIT |
| bool "Initialize CBMEM while in ROM stage" |
| default n |
| help |
| Make coreboot initialize the cbmem structures while running in ROM |
| stage. This could be useful when the ROM stage wants to communicate |
| some, for instance, execution timestamps. |
| |
| config COLLECT_TIMESTAMPS |
| bool "Create a table of timestamps collected during boot" |
| depends on EARLY_CBMEM_INIT |
| help |
| Make coreboot create a table of timer-ID/timer-value pairs to |
| allow measuring time spent at different phases of the boot process. |
| |
| config USE_BLOBS |
| bool "Allow use of binary-only repository" |
| default n |
| help |
| This draws in the blobs repository, which contains binary files that |
| might be required for some chipsets or boards. |
| This flag ensures that a "Free" option remains available for users. |
| |
| config REQUIRES_BLOB |
| bool |
| default n |
| help |
| This option can be configured by boards that require the blobs |
| repository for the default configuration. It will make the build |
| fail if USE_BLOBS is disabled. Users that still desire to do a |
| coreboot build for such a board can override this manually, but |
| this option serves as warning that it might fail. |
| |
| endmenu |
| |
| source src/mainboard/Kconfig |
| |
| # This option is used to set the architecture of a mainboard to X86. |
| # It is usually set in mainboard/*/Kconfig. |
| config ARCH_X86 |
| bool |
| default n |
| |
| if ARCH_X86 |
| source src/arch/x86/Kconfig |
| endif |
| |
| menu "Chipset" |
| |
| comment "CPU" |
| source src/cpu/Kconfig |
| comment "Northbridge" |
| source src/northbridge/Kconfig |
| comment "Southbridge" |
| source src/southbridge/Kconfig |
| comment "Super I/O" |
| source src/superio/Kconfig |
| comment "Devices" |
| source src/devices/Kconfig |
| comment "Embedded Controllers" |
| source src/ec/Kconfig |
| |
| endmenu |
| |
| menu "Generic Drivers" |
| source src/drivers/Kconfig |
| endmenu |
| |
| config PCI_BUS_SEGN_BITS |
| int |
| default 0 |
| |
| config PCI_ROM_RUN |
| bool |
| default n |
| |
| config HEAP_SIZE |
| hex |
| default 0x4000 |
| |
| config MAX_CPUS |
| int |
| default 1 |
| |
| config MMCONF_SUPPORT_DEFAULT |
| bool |
| default n |
| |
| config MMCONF_SUPPORT |
| bool |
| default n |
| |
| source src/console/Kconfig |
| |
| # This should default to N and be set by SuperI/O drivers that have an UART |
| config HAVE_UART_IO_MAPPED |
| bool |
| default y |
| |
| config HAVE_UART_MEMORY_MAPPED |
| bool |
| default n |
| |
| config HAVE_ACPI_RESUME |
| bool |
| default n |
| |
| config HAVE_ACPI_SLIC |
| bool |
| default n |
| |
| config ACPI_SSDTX_NUM |
| int |
| default 0 |
| |
| config HAVE_HARD_RESET |
| bool |
| default y if BOARD_HAS_HARD_RESET |
| default n |
| help |
| This variable specifies whether a given board has a hard_reset |
| function, no matter if it's provided by board code or chipset code. |
| |
| config HAVE_INIT_TIMER |
| bool |
| default n if UDELAY_IO |
| default y |
| |
| config HIGH_SCRATCH_MEMORY_SIZE |
| hex |
| default 0x0 |
| |
| config HAVE_MAINBOARD_RESOURCES |
| bool |
| default n |
| |
| config USE_OPTION_TABLE |
| bool |
| default n |
| |
| config HAVE_OPTION_TABLE |
| bool |
| default n |
| help |
| This variable specifies whether a given board has a cmos.layout |
| file containing NVRAM/CMOS bit definitions. |
| It defaults to 'n' but can be selected in mainboard/*/Kconfig. |
| |
| config PIRQ_ROUTE |
| bool |
| default n |
| |
| config HAVE_SMI_HANDLER |
| bool |
| default n |
| |
| config PCI_IO_CFG_EXT |
| bool |
| default n |
| |
| config IOAPIC |
| bool |
| default n |
| |
| config TPM |
| bool |
| default n |
| |
| # TODO: Can probably be removed once all chipsets have kconfig options for it. |
| config VIDEO_MB |
| int |
| default 0 |
| |
| config USE_WATCHDOG_ON_BOOT |
| bool |
| default n |
| |
| config VGA |
| bool |
| default n |
| help |
| Build board-specific VGA code. |
| |
| config GFXUMA |
| bool |
| default n |
| help |
| Enable Unified Memory Architecture for graphics. |
| |
| # TODO |
| # menu "Drivers" |
| # |
| # endmenu |
| |
| config HAVE_ACPI_TABLES |
| bool |
| help |
| This variable specifies whether a given board has ACPI table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the ACPI tables are actually generated by coreboot |
| is configurable by the user via GENERATE_ACPI_TABLES. |
| |
| config HAVE_MP_TABLE |
| bool |
| help |
| This variable specifies whether a given board has MP table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the MP table is actually generated by coreboot |
| is configurable by the user via GENERATE_MP_TABLE. |
| |
| config HAVE_PIRQ_TABLE |
| bool |
| help |
| This variable specifies whether a given board has PIRQ table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the PIRQ table is actually generated by coreboot |
| is configurable by the user via GENERATE_PIRQ_TABLE. |
| |
| #These Options are here to avoid "undefined" warnings. |
| #The actual selection and help texts are in the following menu. |
| |
| config GENERATE_ACPI_TABLES |
| bool |
| default HAVE_ACPI_TABLES |
| |
| config GENERATE_MP_TABLE |
| bool |
| default HAVE_MP_TABLE |
| |
| config GENERATE_PIRQ_TABLE |
| bool |
| default HAVE_PIRQ_TABLE |
| |
| config GENERATE_SMBIOS_TABLES |
| bool |
| default y |
| |
| menu "System tables" |
| |
| config WRITE_HIGH_TABLES |
| bool "Write 'high' tables to avoid being overwritten in F segment" |
| default y |
| |
| config MULTIBOOT |
| bool "Generate Multiboot tables (for GRUB2)" |
| default y |
| |
| config GENERATE_ACPI_TABLES |
| depends on HAVE_ACPI_TABLES |
| bool "Generate ACPI tables" |
| default y |
| help |
| Generate ACPI tables for this board. |
| |
| If unsure, say Y. |
| |
| config GENERATE_MP_TABLE |
| depends on HAVE_MP_TABLE |
| bool "Generate an MP table" |
| default y |
| help |
| Generate an MP table (conforming to the Intel MultiProcessor |
| specification 1.4) for this board. |
| |
| If unsure, say Y. |
| |
| config GENERATE_PIRQ_TABLE |
| depends on HAVE_PIRQ_TABLE |
| bool "Generate a PIRQ table" |
| default y |
| help |
| Generate a PIRQ table for this board. |
| |
| If unsure, say Y. |
| |
| config GENERATE_SMBIOS_TABLES |
| depends on ARCH_X86 |
| bool "Generate SMBIOS tables" |
| default y |
| help |
| Generate SMBIOS tables for this board. |
| |
| If unsure, say Y. |
| |
| endmenu |
| |
| menu "Payload" |
| |
| choice |
| prompt "Add a payload" |
| default PAYLOAD_NONE if !ARCH_X86 |
| default PAYLOAD_SEABIOS if ARCH_X86 |
| |
| config PAYLOAD_NONE |
| bool "None" |
| help |
| Select this option if you want to create an "empty" coreboot |
| ROM image for a certain mainboard, i.e. a coreboot ROM image |
| which does not yet contain a payload. |
| |
| For such an image to be useful, you have to use 'cbfstool' |
| to add a payload to the ROM image later. |
| |
| config PAYLOAD_ELF |
| bool "An ELF executable payload" |
| help |
| Select this option if you have a payload image (an ELF file) |
| which coreboot should run as soon as the basic hardware |
| initialization is completed. |
| |
| You will be able to specify the location and file name of the |
| payload image later. |
| |
| config PAYLOAD_SEABIOS |
| bool "SeaBIOS" |
| depends on ARCH_X86 |
| help |
| Select this option if you want to build a coreboot image |
| with a SeaBIOS payload. If you don't know what this is |
| about, just leave it enabled. |
| |
| See http://coreboot.org/Payloads for more information. |
| |
| config PAYLOAD_FILO |
| bool "FILO" |
| help |
| Select this option if you want to build a coreboot image |
| with a FILO payload. If you don't know what this is |
| about, just leave it enabled. |
| |
| See http://coreboot.org/Payloads for more information. |
| |
| endchoice |
| |
| choice |
| prompt "SeaBIOS version" |
| default SEABIOS_STABLE |
| depends on PAYLOAD_SEABIOS |
| |
| config SEABIOS_STABLE |
| bool "stable" |
| help |
| Stable SeaBIOS version |
| config SEABIOS_MASTER |
| bool "master" |
| help |
| Newest SeaBIOS version |
| endchoice |
| |
| choice |
| prompt "FILO version" |
| default FILO_STABLE |
| depends on PAYLOAD_FILO |
| |
| config FILO_STABLE |
| bool "0.6.0" |
| help |
| Stable FILO version |
| config FILO_MASTER |
| bool "HEAD" |
| help |
| Newest FILO version |
| endchoice |
| |
| config PAYLOAD_FILE |
| string "Payload path and filename" |
| depends on PAYLOAD_ELF |
| default "payload.elf" |
| help |
| The path and filename of the ELF executable file to use as payload. |
| |
| config PAYLOAD_FILE |
| depends on PAYLOAD_SEABIOS |
| default "$(obj)/seabios/out/bios.bin.elf" |
| |
| config PAYLOAD_FILE |
| depends on PAYLOAD_FILO |
| default "payloads/external/FILO/filo/build/filo.elf" |
| |
| # TODO: Defined if no payload? Breaks build? |
| config COMPRESSED_PAYLOAD_LZMA |
| bool "Use LZMA compression for payloads" |
| default y |
| depends on PAYLOAD_ELF || PAYLOAD_SEABIOS || PAYLOAD_FILO |
| help |
| In order to reduce the size payloads take up in the ROM chip |
| coreboot can compress them using the LZMA algorithm. |
| |
| config COMPRESSED_PAYLOAD_NRV2B |
| bool |
| default n |
| |
| endmenu |
| |
| menu "VGA BIOS" |
| |
| config VGA_BIOS |
| bool "Add a VGA BIOS image" |
| help |
| Select this option if you have a VGA BIOS image that you would |
| like to add to your ROM. |
| |
| You will be able to specify the location and file name of the |
| image later. |
| |
| config VGA_BIOS_FILE |
| string "VGA BIOS path and filename" |
| depends on VGA_BIOS |
| default "vgabios.bin" |
| help |
| The path and filename of the file to use as VGA BIOS. |
| |
| config VGA_BIOS_ID |
| string "VGA device PCI IDs" |
| depends on VGA_BIOS |
| default "1106,3230" |
| help |
| The comma-separated PCI vendor and device ID that would associate |
| your VGA BIOS to your video card. |
| |
| Example: 1106,3230 |
| |
| In the above example 1106 is the PCI vendor ID (in hex, but without |
| the "0x" prefix) and 3230 specifies the PCI device ID of the |
| video card (also in hex, without "0x" prefix). |
| |
| config INTEL_MBI |
| bool "Add an MBI image" |
| depends on NORTHBRIDGE_INTEL_I82830 |
| help |
| Select this option if you have an Intel MBI image that you would |
| like to add to your ROM. |
| |
| You will be able to specify the location and file name of the |
| image later. |
| |
| config MBI_FILE |
| string "Intel MBI path and filename" |
| depends on INTEL_MBI |
| default "mbi.bin" |
| help |
| The path and filename of the file to use as VGA BIOS. |
| |
| endmenu |
| |
| menu "Display" |
| depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE |
| |
| config FRAMEBUFFER_SET_VESA_MODE |
| prompt "Set VESA framebuffer mode" |
| bool |
| depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE |
| help |
| Set VESA framebuffer mode (needed for bootsplash) |
| |
| # TODO: Turn this into a "choice". |
| config FRAMEBUFFER_VESA_MODE |
| prompt "VESA framebuffer video mode" |
| hex |
| default 0x117 |
| depends on FRAMEBUFFER_SET_VESA_MODE |
| help |
| This option sets the resolution used for the coreboot framebuffer (and |
| bootsplash screen). Set to 0x117 for 1024x768x16. A diligent soul will |
| some day make this a "choice". |
| |
| config FRAMEBUFFER_KEEP_VESA_MODE |
| prompt "Keep VESA framebuffer" |
| bool |
| depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE |
| help |
| This option keeps the framebuffer mode set after coreboot finishes |
| execution. If this option is enabled, coreboot will pass a |
| framebuffer entry in its coreboot table and the payload will need a |
| framebuffer driver. If this option is disabled, coreboot will switch |
| back to text mode before handing control to a payload. |
| |
| config BOOTSPLASH |
| prompt "Show graphical bootsplash" |
| bool |
| depends on FRAMEBUFFER_SET_VESA_MODE |
| help |
| This option shows a graphical bootsplash screen. The grapics are |
| loaded from the CBFS file bootsplash.jpg. |
| |
| config BOOTSPLASH_FILE |
| string "Bootsplash path and filename" |
| depends on BOOTSPLASH |
| default "bootsplash.jpg" |
| help |
| The path and filename of the file to use as graphical bootsplash |
| screen. The file format has to be jpg. |
| endmenu |
| |
| menu "Debugging" |
| |
| # TODO: Better help text and detailed instructions. |
| config GDB_STUB |
| bool "GDB debugging support" |
| default n |
| help |
| If enabled, you will be able to set breakpoints for gdb debugging. |
| See src/arch/x86/lib/c_start.S for details. |
| |
| config DEBUG_CBFS |
| bool "Output verbose CBFS debug messages" |
| default n |
| depends on TPM |
| help |
| This option enables additional CBFS related debug messages. |
| |
| config HAVE_DEBUG_RAM_SETUP |
| def_bool n |
| |
| config DEBUG_RAM_SETUP |
| bool "Output verbose RAM init debug messages" |
| default n |
| depends on HAVE_DEBUG_RAM_SETUP |
| help |
| This option enables additional RAM init related debug messages. |
| It is recommended to enable this when debugging issues on your |
| board which might be RAM init related. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config HAVE_DEBUG_CAR |
| def_bool n |
| |
| config DEBUG_CAR |
| def_bool n |
| depends on HAVE_DEBUG_CAR |
| |
| if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 |
| # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional |
| # printk(BIOS_DEBUG, ...) calls. |
| config DEBUG_CAR |
| bool "Output verbose Cache-as-RAM debug messages" |
| default n |
| depends on HAVE_DEBUG_CAR |
| help |
| This option enables additional CAR related debug messages. |
| endif |
| |
| config DEBUG_PIRQ |
| bool "Check PIRQ table consistency" |
| default n |
| depends on GENERATE_PIRQ_TABLE |
| help |
| If unsure, say N. |
| |
| config HAVE_DEBUG_SMBUS |
| def_bool n |
| |
| config DEBUG_SMBUS |
| bool "Output verbose SMBus debug messages" |
| default n |
| depends on HAVE_DEBUG_SMBUS |
| help |
| This option enables additional SMBus (and SPD) debug messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config DEBUG_SMI |
| bool "Output verbose SMI debug messages" |
| default n |
| depends on HAVE_SMI_HANDLER |
| help |
| This option enables additional SMI related debug messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config DEBUG_SMM_RELOCATION |
| bool "Debug SMM relocation code" |
| default n |
| depends on HAVE_SMI_HANDLER |
| help |
| This option enables additional SMM handler relocation related |
| debug messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config DEBUG_MALLOC |
| def_bool n |
| |
| # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional |
| # printk(BIOS_DEBUG, ...) calls. |
| if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 |
| config DEBUG_MALLOC |
| bool "Output verbose malloc debug messages" |
| default n |
| help |
| This option enables additional malloc related debug messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| endif |
| |
| config DEBUG_ACPI |
| def_bool n |
| |
| # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional |
| # printk(BIOS_DEBUG, ...) calls. |
| if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 |
| config DEBUG_ACPI |
| bool "Output verbose ACPI debug messages" |
| default n |
| help |
| This option enables additional ACPI related debug messages. |
| |
| Note: This option will slightly increase the size of the coreboot image. |
| |
| If unsure, say N. |
| endif |
| |
| config REALMODE_DEBUG |
| def_bool n |
| depends on PCI_OPTION_ROM_RUN_REALMODE |
| |
| if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 |
| # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional |
| # printk(BIOS_DEBUG, ...) calls. |
| config REALMODE_DEBUG |
| bool "Enable debug messages for option ROM execution" |
| default n |
| depends on PCI_OPTION_ROM_RUN_REALMODE |
| help |
| This option enables additional x86emu related debug messages. |
| |
| Note: This option will increase the time to emulate a ROM. |
| |
| If unsure, say N. |
| endif |
| |
| config X86EMU_DEBUG |
| bool "Output verbose x86emu debug messages" |
| default n |
| depends on PCI_OPTION_ROM_RUN_YABEL |
| help |
| This option enables additional x86emu related debug messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_JMP |
| bool "Trace JMP/RETF" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print information about JMP and RETF opcodes from x86emu. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_TRACE |
| bool "Trace all opcodes" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print _all_ opcodes that are executed by x86emu. |
| |
| WARNING: This will produce a LOT of output and take a long time. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_PNP |
| bool "Log Plug&Play accesses" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print Plug And Play accesses made by option ROMs. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_DISK |
| bool "Log Disk I/O" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print Disk I/O related messages. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_PMM |
| bool "Log PMM" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print messages related to POST Memory Manager (PMM). |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| |
| config X86EMU_DEBUG_VBE |
| bool "Debug VESA BIOS Extensions" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print messages related to VESA BIOS Extension (VBE) functions. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_INT10 |
| bool "Redirect INT10 output to console" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Let INT10 (i.e. character output) calls print messages to debug output. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_INTERRUPTS |
| bool "Log intXX calls" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print messages related to interrupt handling. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_CHECK_VMEM_ACCESS |
| bool "Log special memory accesses" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print messages related to accesses to certain areas of the virtual |
| memory (e.g. BDA (BIOS Data Area) or interrupt vectors) |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_MEM |
| bool "Log all memory accesses" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print memory accesses made by option ROM. |
| Note: This also includes accesses to fetch instructions. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config X86EMU_DEBUG_IO |
| bool "Log IO accesses" |
| default n |
| depends on X86EMU_DEBUG |
| help |
| Print I/O accesses made by option ROM. |
| |
| Note: This option will increase the size of the coreboot image. |
| |
| If unsure, say N. |
| |
| config DEBUG_TPM |
| bool "Output verbose TPM debug messages" |
| default n |
| depends on TPM |
| help |
| This option enables additional TPM related debug messages. |
| |
| if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8 |
| # Only visible with the right southbridge and loglevel. |
| config DEBUG_INTEL_ME |
| bool "Verbose logging for Intel Management Engine" |
| default n |
| help |
| Enable verbose logging for Intel Management Engine driver that |
| is present on Intel 6-series chipsets. |
| endif |
| |
| config LLSHELL |
| bool "Built-in low-level shell" |
| default n |
| help |
| If enabled, you will have a low level shell to examine your machine. |
| Put llshell() in your (romstage) code to start the shell. |
| See src/arch/x86/llshell/llshell.inc for details. |
| |
| config TRACE |
| bool "Trace function calls" |
| default n |
| help |
| If enabled, every function will print information to console once |
| the function is entered. The syntax is ~0xaaaabbbb(0xccccdddd) |
| the 0xaaaabbbb is the actual function and 0xccccdddd is EIP |
| of calling function. Please note some printk releated functions |
| are omitted from trace to have good looking console dumps. |
| endmenu |
| |
| config LIFT_BSP_APIC_ID |
| bool |
| default n |
| |
| # These probably belong somewhere else, but they are needed somewhere. |
| config AP_CODE_IN_CAR |
| bool |
| default n |
| |
| config RAMINIT_SYSINFO |
| bool |
| default n |
| |
| config ENABLE_APIC_EXT_ID |
| bool |
| default n |
| |
| config WARNINGS_ARE_ERRORS |
| bool |
| default y |
| |
| # The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE, |
| # POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are |
| # mutually exclusive. One of these options must be selected in the |
| # mainboard Kconfig if the chipset supports enabling and disabling of |
| # the power button. Chipset code uses the ENABLE_POWER_BUTTON option set |
| # in mainboard/Kconfig to know if the button should be enabled or not. |
| |
| config POWER_BUTTON_DEFAULT_ENABLE |
| def_bool n |
| help |
| Select when the board has a power button which can optionally be |
| disabled by the user. |
| |
| config POWER_BUTTON_DEFAULT_DISABLE |
| def_bool n |
| help |
| Select when the board has a power button which can optionally be |
| enabled by the user, e.g. when the board ships with a jumper over |
| the power switch contacts. |
| |
| config POWER_BUTTON_FORCE_ENABLE |
| def_bool n |
| help |
| Select when the board requires that the power button is always |
| enabled. |
| |
| config POWER_BUTTON_FORCE_DISABLE |
| def_bool n |
| help |
| Select when the board requires that the power button is always |
| disabled, e.g. when it has been hardwired to ground. |
| |
| config POWER_BUTTON_IS_OPTIONAL |
| bool |
| default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE |
| default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE) |
| help |
| Internal option that controls ENABLE_POWER_BUTTON visibility. |
| |
| source src/Kconfig.deprecated_options |
| source src/vendorcode/Kconfig |