| 1) Are you familar with coreboot? |
| |
| no : abort |
| yes: go to next step. |
| |
| 2) do you have Matsonic 7308e motherboard? |
| |
| no : you are on your own (untested). |
| yes: go to next step. |
| |
| 3) do you have LiuxBIOS running on Matsonic 7308e motherboard? |
| |
| no : get it working first on your motherboard. |
| yes: go to next step. |
| |
| 4) Acquire copy of your VIDEO BIOS. |
| |
| -Put in your PC BIOS into the system, |
| -Boot into linux. |
| -as root run "make videobios" from ADLO's root dir. |
| -copy the file to video directory |
| adjust make file as needed. |
| |
| 5) Acquire copy of your PIRQ table. |
| |
| At present time it is not necessary to do this |
| and you can use supplied PIRQ table. |
| |
| 6) Acquire copy of BOCHS bios. |
| |
| At present time it is not necessary to do this |
| and you can use supplied rombios.c. |
| |
| In fact you should use supplied rombios.c |
| file as the one used with BOCHS is not |
| complete at the present time. |
| |
| 7) Examine make file to see that it does what u want. |
| |
| 8) compile |
| |
| make |
| |
| 9) use the resulting elf "payload" file with coreboot as you would |
| have used any other elf file. For example put it on the same |
| EERPOM as coreboot is, or use EtherBOOT to load the payload |
| file from hdd or network. |