# SPDX-License-Identifier: GPL-2.0-only

config PLATFORM_USES_FSP2_0
	bool
	default n
	help
	  Include FSP 2.0 wrappers and functionality

config PLATFORM_USES_FSP2_1
	bool
	default n
	select PLATFORM_USES_FSP2_0
	select FSP_USES_CB_STACK
	help
	  Include FSP 2.1 wrappers and functionality.
	  Feature added into FSP 2.1 specification that impacts coreboot is:
	  1. Remove FSP stack switch and use the same stack with boot firmware

config PLATFORM_USES_FSP2_2
	bool
	default n
	select PLATFORM_USES_FSP2_1
	help
	  Include FSP 2.2 wrappers and functionality.
	  Features added into FSP 2.2 specification that impact coreboot are:
	  1. Added multi-phase silicon initialization to increase the modularity of the
	      FspSiliconInit() API
	  2. FSP_INFO_HEADER changes to add FspMultiPhaseSiInitEntryOffset
	  3. Added EnableMultiPhaseSiliconInit, bootloaders designed for FSP2.0/2.1 can disable
	      the FspMultiPhaseSiInit() API and continue to use FspSiliconInit() without change.

config PLATFORM_USES_FSP2_3
	bool
	default n
	select PLATFORM_USES_FSP2_2
	help
	  Include FSP 2.3 wrappers and functionality.
	  Features added into FSP 2.3 specification that impact coreboot are:
	  1. Added ExtendedImageRevision field in FSP_INFO_HEADER
	  2. Added FSP_NON_VOLATILE_STORAGE_HOB2

if PLATFORM_USES_FSP2_0

config PLATFORM_USES_FSP2_X86_32
	bool
	default y
	help
	  The FSP 2.0 runs in x86_32 protected mode.
	  Once there's a x86_64 FSP this needs to default to n.

config HAVE_INTEL_FSP_REPO
	bool
	help
	  Select this, if the FSP binaries for the platform are public
	  and available in 3rdparty/fsp/. When selecting this option, the
	  platform must also set FSP_HEADER_PATH and FSP_FD_PATH correctly.

config FSP_USE_REPO
	bool "Use binaries of the Intel FSP repository on GitHub"
	depends on HAVE_INTEL_FSP_REPO
	select FSP_FULL_FD
	default y
	help
	  Select this option to use the default FSP headers and binaries
	  found in the IntelFsp GitHub repository at

	    https://github.com/IntelFsp/FSP/

	  If unsure, say Y.

config FSP_HEADER_PATH
	string "Location of FSP headers" if !FSP_USE_REPO
	help
	  Include directory with the FSP ABI header files.

config ADD_FSP_BINARIES
	bool "Add Intel FSP 2.0 binaries to CBFS" if !FSP_USE_REPO
	default y if FSP_USE_REPO
	help
	  Add the FSP-M and FSP-S binaries to CBFS.

config FSP_T_CBFS
	string "Name of FSP-T in CBFS"
	depends on FSP_CAR
	default "fspt.bin"

config FSP_T_LOCATION
	hex
	default 0xfffe0000
	help
	  The location for FSP-T.

config FSP_S_CBFS
	string "Name of FSP-S in CBFS"
	default "fsps.bin"

config FSP_M_CBFS
	string "Name of FSP-M in CBFS"
	default "fspm.bin"

config FSP_FULL_FD
	bool "Use a combined FSP FD file" if !FSP_USE_REPO
	depends on ADD_FSP_BINARIES
	help
	  Use a combined FSP FD file instead of specifying individual, already split
	  binaries and split the file at build-time.

config FSP_FD_PATH
	string "Location of FSP FD file" if FSP_FULL_FD && !FSP_USE_REPO
	help
	  Path to the FSP FD file that contains the individual FSP-T, FSP-M
	  and FSP-S binaries. The file gets split at build-time.

config FSP_T_FILE
	string "Intel FSP-T (temp RAM init) binary path and filename" if !FSP_FULL_FD
	depends on ADD_FSP_BINARIES
	depends on FSP_CAR
	default "\$(obj)/Fsp_T.fd" if FSP_FULL_FD
	help
	  The path and filename of the Intel FSP-T binary for this platform.

config FSP_M_FILE
	string "Intel FSP-M (memory init) binary path and filename" if !FSP_FULL_FD
	depends on ADD_FSP_BINARIES
	default "\$(obj)/Fsp_M.fd" if FSP_FULL_FD
	help
	  The path and filename of the Intel FSP-M binary for this platform.

config FSP_S_FILE
	string "Intel FSP-S (silicon init) binary path and filename" if !FSP_FULL_FD
	depends on ADD_FSP_BINARIES
	default "\$(obj)/Fsp_S.fd" if FSP_FULL_FD
	help
	  The path and filename of the Intel FSP-S binary for this platform.

config FSP_CAR
	bool
	default n
	select NO_CBFS_MCACHE if !NO_FSP_TEMP_RAM_EXIT
	help
	  Use FSP APIs to initialize & Tear Down the Cache-As-Ram

config FSP_T_RESERVED_SIZE
	hex
	default 0x100 if FSP_CAR
	default 0x0
	help
	  This is the size of the area reserved by FSP-T. This is not
	  defined in the FSP specification but in the SOC integration
	  guides.

config NO_FSP_TEMP_RAM_EXIT
	bool
	depends on FSP_CAR
	help
	  Select this on a platform where you want to use FSP-T but use
	  coreboot code to tear down CAR.

config FSP_M_XIP
	bool
	default n
	help
	  Select this value when FSP-M is execute-in-place.

config FSP_T_XIP
	bool
	default n
	help
	  Select this value when FSP-T is execute-in-place.

config FSP_USES_CB_STACK
	bool
	default n
	help
	  Enable support for fsp to use same stack as coreboot.
	  This option allows fsp to continue using coreboot stack
	  without reinitializing stack pointer. This feature is
	  supported Icelake onwards.

config FSP_TEMP_RAM_SIZE
	hex
	help
	  The amount of memory coreboot reserves for the FSP to use. In the
	  case of FSP 2.1 and newer that share the stack with coreboot instead
	  of having its own stack, this is the amount of anticipated heap usage
	  in CAR by FSP to setup HOB and needs to be the recommended value from
	  the Platform FSP integration guide. In the case of the FSP having its
	  own stack that will be placed in DRAM and not in CAR, this is the
	  amount of memory the FSP needs for its stack and heap.

config FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS
	bool
	help
	  This is selected by SoC or mainboard to supply their own
	  concept of a version for the memory settings respectively.
	  This allows deployed systems to bump their version number
	  with the same FSP which will trigger a retrain of the memory.

config HAVE_FSP_LOGO_SUPPORT
	bool
	default n

config BMP_LOGO
	bool "Enable logo"
	default n
	depends on HAVE_FSP_LOGO_SUPPORT
	help
	  Uses the FSP to display the boot logo. This method supports a
	  BMP file only. The uncompressed size can be up to 1 MB. The logo can be compressed
	  using LZMA.

config FSP2_0_LOGO_FILE_NAME
	string "Logo file"
	depends on BMP_LOGO
	default "3rdparty/blobs/mainboard/\$(MAINBOARDDIR)/logo.bmp"

config FSP_COMPRESS_FSP_S_LZMA
	bool

config FSP_COMPRESS_FSP_S_LZ4
	bool

config FSP_COMPRESS_FSP_M_LZMA
	bool
	depends on !FSP_M_XIP

config FSP_COMPRESS_FSP_M_LZ4
	bool
	depends on !FSP_M_XIP

config FSP_ALIGNMENT_FSP_S
	int
	help
	  Sets the CBFS alignment for FSP-S

config FSP_ALIGNMENT_FSP_M
	int
	help
	  Sets the CBFS alignment for FSP-M

config FSP_M_ADDR
	hex
	help
	  The address FSP-M will be relocated to during build time

config FSP_STATUS_GLOBAL_RESET_REQUIRED_3
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET_REQUIRED_4
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET_REQUIRED_5
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET_REQUIRED_6
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET_REQUIRED_7
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET_REQUIRED_8
	bool
	help
	  FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2

config FSP_STATUS_GLOBAL_RESET
	hex
	depends on SOC_INTEL_COMMON_FSP_RESET
	default 0x40000003 if FSP_STATUS_GLOBAL_RESET_REQUIRED_3
	default 0x40000004 if FSP_STATUS_GLOBAL_RESET_REQUIRED_4
	default 0x40000005 if FSP_STATUS_GLOBAL_RESET_REQUIRED_5
	default 0x40000006 if FSP_STATUS_GLOBAL_RESET_REQUIRED_6
	default 0x40000007 if FSP_STATUS_GLOBAL_RESET_REQUIRED_7
	default 0x40000008 if FSP_STATUS_GLOBAL_RESET_REQUIRED_8
	default 0xffffffff
	help
	  If global reset is supported by SoC then select the correct status value for global
	  reset type from SoC Kconfig based on available Kconfig options
	  FSP_STATUS_GLOBAL_RESET_REQUIRED_X. Default is unsupported.

config SOC_INTEL_COMMON_FSP_RESET
	bool
	help
	  Common code block to handle platform reset request raised by FSP. The FSP
	  will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that
	  a reset is required.

config FSPS_HAS_ARCH_UPD
	bool
	help
	  SoC users must select this Kconfig if the `FSPS_UPD` header has architecture
	  UPD structure as `FSPS_ARCH_UPD`. Typically, platform with FSP 2.2 specification
	  onwards has support for `FSPS_ARCH_UPD` section as part of `FSPS_UPD` structure.
	  But there are some exceptions as in TGL, JSL, XEON_SP FSP header doesn't have
	  support for FSPS_ARCH_UPD.

config FSPS_USE_MULTI_PHASE_INIT
	bool
	help
	  SoC users to select this Kconfig to set EnableMultiPhaseSiliconInit to enable and
	  execute FspMultiPhaseSiInit() API.

config USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
	bool
	help
	  The FSP API is used to notify the FSP about different phases in the boot process.
	  The current FSP specification supports three notify phases:
	  - Post PCI enumeration
	  - Ready to Boot
	  - End of Firmware
	  This option allows FSP to execute Notify Phase API (Post PCI enumeration).
	  SoC users can override this config to use coreboot native implementations
	  to perform the required lock down and chipset register configuration prior
	  to executing any 3rd-party code during PCI enumeration (i.e. Option ROM).

	  coreboot native implementation to skip FSP Notify Phase (Post PCI enumeration)
	  is still WIP.

config USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
	bool
	help
	  The FSP API is used to notify the FSP about different phases in the boot process.
	  The current FSP specification supports three notify phases:
	  - Post PCI enumeration
	  - Ready to Boot
	  - End of Firmware
	  This option allows FSP to execute Notify Phase API (Ready to Boot).
	  SoC users can override this config to use coreboot native implementations
	  to perform the required lock down and chipset register configuration prior
	  boot to payload.

config USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
	bool
	help
	  The FSP API is used to notify the FSP about different phases in the boot process.
	  The current FSP specification supports three notify phases:
	  - Post PCI enumeration
	  - Ready to Boot
	  - End of Firmware
	  This option allows FSP to execute Notify Phase API (End of Firmware).
	  SoC users can override this config to use coreboot native implementations
	  to perform the required lock down and chipset register configuration prior
	  boot to payload.

config FSP_USES_CB_DEBUG_EVENT_HANDLER
	bool
	default n
	help
	  This option allows to create `Debug Event Handler` to print FSP debug messages
	  to output device using coreboot native implementation.

config DISPLAY_FSP_TIMESTAMPS
	bool "Display FSP Timestamps"
	default n
	help
	  Select this config to retrieve FSP timestamps from Firmware Performance Data Table
	  (FPDT) and display from ramstage after FSP-S is executed.

	  To be able to use this, FSP has to be compiled with `PcdFspPerformanceEnable` set to
	  `TRUE`.

config FSP_ENABLE_SERIAL_DEBUG
	bool "Output FSP debug messages on serial console"
	default y
	depends on FSP_USES_CB_DEBUG_EVENT_HANDLER
	help
	  Output FSP debug messages on serial console.

	  The config option is selected based on your FSP configuration i.e., debug or
	  release. Enable this option from site-local to print FSP serial messages using
	  coreboot native debug driver when coreboot has integrated the debug FSP
	  binaries. coreboot disables serial messages when this config is not enabled.

config SAVE_MRC_AFTER_FSPS
	bool
	default n
	depends on XEON_SP_COMMON_BASE
	help
	  Save MRC training data after FSP-S. Select this on platforms that generate MRC
	  cache HOB data as part of FSP-S rather than FSP-M.

config FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN
	bool
	default n
	depends on PLATFORM_USES_FSP2_2
	help
	  Select this config for Intel SoC platform where FSP MultiPhaseSiInit API is unable
	  to return ERROR status properly.

	  The config option will be selected based on the target SoC platform and if the
	  problem existed inside the FSP MultiPhaseSiInit. At present the problem has only
	  reported with Alder Lake and Raptor Lake FSP where MultiPhaseSiInit API is unable
	  to return any ERROR status.

endif